What Stratergy Shoud Be Follow While Migrating In The Same Version ?
Nov 15, 2007
Hi All,
I am facing a problem in my personal edition of sql server 2000. my this edition is hung after some time due to error "the schedular 0 appear to be hung in sql server 2000" and next error is "the schedular 1 appear to be hung in sql server 2000" i found the solution of this error i run sp4, after that this error wont appear to me in the error log , but the other problem occur which is "your server is configure for 8 concurrent process but currently 166 process running so the performance would be degrade" and after that i am not able to log into the server. Due to this concurrent process problem i want to go for sql server 2000 Enterprise edition. so what stragery should i follow for upgradation of server. any other alternative of this problem
Error 1608, Severity 21, state : 2 A network error was encountered while sending results to the front end . Check the SQL server errorlog for more information
OS Error 232, the pipe is being closed Error : 17824, Severity 10, Unable to write to ListenOn connection `.pipesqlquery,loginname `sa`, hostname `hpa4w320`
I know the cause as to why the error is generated, the REAL PROBLEM is that the SQL server posts the above mentioned messages to the ERRORLOG, every fraction of a second & the errorlog has grown to something like 1.2 Gig.
Does anyone know , how to prevent such a thing from happening.
Shoud I use "replication" for my problem's solution and which type? Or shoud I solve my problem by using triggers? Or any other suggestions.
The problem is this:
There are two databases in the same server, A and B. These databases have same tables and objects. In any time, when a record has been inserted to a table in database A, that record must be inserted to same table in database B. However, the opposite of this scenario is possible, too.
I have a developer who built an application using the SSE 2005 December CTP and I would like to bring the db's into the official SSE 2005 released version. I have attempted the following:
1. Create the db's in the released version, detach and re-attach the CTP db's. I got an error telling me they were incompatible.
2. Installed CTP version on one server, backed up the db's and then attempted to restore the db's on another server running the official released version of SSE 2005. Got an error attempting that too.
3. Installed the Management Studio for SS 2005 Developer edition thinking that I could connect to the two seperate instances of each server and like I could in EM 2000 run the transfer wizard to move the db's and data from one server to the next. Problem with this is that I can't get an object browser connection established. I have TCP/IP all config'd correctly, too.
Any other ideas where I can go with this at this time?
We have a 20 GB database and reorganize indexes and update statistics maintainance takes about 4 hours and the log files grows out of control what is a serious problem since it can not be truncated (database mirroring).
Hi I would like to get more information about using detail view together with auto date/time. I am designing user input form as follow. tid : uid : tool : priority: reticle: status: remarks: request time : <- to autogenetrate current timeInsert Cancel How to use date/time function inside detailed view, insert template.
How to use a dsn-less connection from DTS?Source: MySQLDestination: SQL Server 7.0I have the ADODB.connection code but unsure where and how to use it.Pls advise.TIA!Bob
Hi allI had some info on setting db owners and chaining so I can execute a dtsrun(many thanks to Dan for that)I have taken the comments on board and done some more research on theinternet, but I'm still struggling.I am testing this on my personal edition, but when I runEXEC sp_dboption 'my dbname', 'db chaining', trueit tells me that the SP doesn't accept the option db chaining.I ran select @@version and I have SP3 on where I believe this option wasimplentedcan anyone give me any further pointers.many thanks for any helpAndy
1. Let's say I have a SqlDataSource named Fred. Say I have a string variable, call it Barney. If I call Fred.Insert(Barney) HOW Does the insert command GET the Barney value and pass it to the SQL Insers string? 2. Lets say also in this same insert, I want the user Lets say Batty, who is logged in, to have her username automatically inserted into the table along with her Barney value. What is the method to get a hold of user name that is magically floating around in the session somewhere? All said and done, I'd love for it to work like this: "INSERT INTO [BedRock] ([UserName], [Character] ) VALUES (SomethingThatResolvesToSignedInUserName, SomehtingThatResolvesToStringValueofVariable) Table BedrockUserName CharacterBettyRubble 'Bam-Bam' THANKS inadvance fro ANY HelpDan-Simple and sleepless-Harper
I had only 40 mb of disk space in the c drive. could that be the reason. if so, how can I turn on the server and get into win NT and make the server up and running. I hope someone can reply as soon as possible
I have a query with 2 subqueries, and no error message is reported, but, my problem is that the 2 subqueries do not follow the GROUP BY rule and show the total instead of by vendor...
Code: SELECT Table1.agents AS Vendor , Count(Table1.carS) AS Car_Sold , Sum(Table1.carP) AS Car_Price , Count(Table1.busS) AS MortBus_Sold , Sum(Table1.busP) AS busPRice
We have an NT 4.0 sp4 server with Sql 6.5, sp4 and its server name needs to be changed. This server will also be upgraded to Sql 7.0 sp1 too.
Is changing the server name easier/more efficient etc in 65 or 70?
Does anyone have any recommendations and or tips to follow in avoiding pitfalls, headaches etc?
Additional info: Replication is not involved here. If we upgrade to 70 first, it will be a "One-computer upgrade" process followed. BOL for 70 doesn't mention anything about a Server Name change. BOL for 65 does have "How to change to the current server name in the 6.x master database..." I was hoping to find specific details on the 'how to...' but was surprised that 70 doesn't cover this.
I have also seen a Jan 15 '99 posting by Sharon Dooley under "Machine Rename" which raises concerns that MS missed the boat on Server Name changes.
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
I am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio ------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported. Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
I have an ssis package that downloads a SQL Server 2000 database and restores it to a SQL 2005 server. Ninety-five percent of the time it runs just fine, but every so often the job fails and I get the following set of error messages in the log file. (I have had to delete some of the proprietary information for this message to satisfy my boss like putting in [Database name] in place of the actual name of the database in the error message).
OnError, Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611. OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551. OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name]. OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name]. OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name] FROM DISK = '[Path to back up file]' WITH REPLACE, MOVE 'ASP_Live_Data' TO [Path to MDF file], MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name] FROM DISK = '[Path to backup file]' WITH REPLACE, MOVE 'ASP_Live_Data' TO [Path to MDF file]', MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. OnTaskFailed,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,(null)
I have received the error message "Package migration from version 8 to version 6 failed".I have developed a SSIS package with Visual Studio 2013 which gives me PackageFormatVersion of 8. I then deploy my package to the ssisdb catalog that is running on a SQL Server 2012, this works fine but when I try to execute the package the error arises…due to SQL Server 2012 has a PackageFormatVersion of 6 and it can’t run something that has a greater version.I haven’t seen any good solution for this but one that would work for me would be to upgrade the Integration Services Server from 2012 to 2014, leaving everything else in 2012 (database, ssms, ssas, ssrs).Would this solve the package format problem? Would I then be able to execute my packages in the ssisdb catalog?
Now, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
I have the trial version of SQL Server 2005 installed and have setup a couple of databases. This trial version will expire in another few weeks. I recently purchased a copy of the software and want to install it. Will I lose my databases, user info, etc? How do I go about installing without losing anything?
We have a 64bit os machine that we accidently loaded the 32 bit version of sql server on. We now want to upgrade it to 64 bit sql server, but we now have a production database on it. My understanding is that all I have to do is detach the production database, upgrade to 64bit sql server, then reattach the database. Is this really all I have to do?
I started this thread as the last attempt to sort the issue out.
I have an SSIS package that loads data from a .csv file into my database. It works fine on my developer machine. I start it programmatically or from Management Studio or from Visual Studio, and it works. Then I deploy it to the MSDB database on the computer on which it will have its final place. There again I can start it from Management Studio or from Visual Studio (using the source file), and it works. But when I start it programmatically, it just fails telling me:
Package Warnings: Package Errors: The version of component "****" (11773) is not compatible with this version of the DataFlow. Component "component "Derived Column" (13627)" could not be created and returned error code 0x80070005. Make sure that the component is registered correctly. The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Flat File Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1". component "Agreement File" (11773) failed validation and returned error code 0xC0048021. One or more component failed validation. There were errors during task validation.
Maybe the source of the problem is that this machine is a 64-bit one, while the developer machine is 32-bit one. But why does the package run fine when I start it from Management Studio?
Can some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Just thought I'd point it out as something that needs fixing. This is inconsistent with every other MS product using the VS.net IDE framework.
I'd post it on Connect but then I'd wait 2 months to get "won't fix - this does not 'fit' with the current Katmai schedule" i.e. if I'm lucky (based on the new improved 3yr delivery of sql) it might get delivered in 2011. Wow.
Imagine if Xbox or PS3 designers told their customers, "sorry we know that up/down/left/right are in fact right/left/down/up, as you may expect on a game controller, but if you wait 3 years we might fix it"
Hello, I installed the SQL Server 2k EnterPrise version and developer version on the same version, and the developer version is an instance "Development". How do I expose both of them to internet? Just open both of them to port 1433? And on the client side, just say IP and IP/Development? Do I need specific set up, will they conflict? Thanks,
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'C.0.8.54'. the expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. I'm getting this whenever try to access the report server via SSMS, I have tried to upgrade via the Reporting Service Configuration Manager but get an error message similar to above except it says: The database version (C.o.8.54) does not match your Reporting Services installation. This version of the database cannot be upgraded. You must use a different database. Has anyone seen this before? I can create a new database, but don't want to loose all my reports. Any ideas. Oh, not even sure if the backups exist from before this error, I've spent 2 weeks trying to get access to the server so I could try to upgrade, only to get the above results. Thanks for your help, David
I downloaded the 101 Samples installation (i.e. 101SamplesCS.msi) from Microsoft's website, which contains SQL Server database files.
While working with the databases in the "Data Access" samples from the 101 Samples projects, I get the following error:
"Database <mdf_name> cannot be upgraded because its non-release version (600) is not supported by this version of SQL Server. You cannot open a database that is incompatible with this version of sqlservr.exe. You must re-create the database..."
I assume the database files were created with a beta or CTP version of SQL Server 2005. Does anyone know where I can get an updated version of these database files or scripts to update them?
