Is there a type of TRIGGER that I can use to do do post-INSERT
processing? I've got one table that I never want to block the INSERT,
but instead need to do post INSERT processing on. The only way I know
to do this is via a JOB, which isn't ideal in this scenerio.
mas
Hi All,
I have the code below on Sql 2k table with the column Descriptivetext defined as
Text Data Type. The table has Path and Page as the PK
I need to set a trigger to update Desciptivetext in other rows with the same path
when a one of them chnages.
Whenever I run the code, no row is updated
CREATE TABLE [dbo].[AB] (
[PATH] [varchar] (255) NOT NULL PRIMARY KEY CLUSTERED ,
[PAGE] [varchar] (60) NOT NULL PRIMARY KEY CLUSTERED ,
[DESCRIPTIVETEXT] [text] NULL
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
CREATE TRIGGER [Update_Staging_Test] ON [dbo].[AB]
INSTEAD OF UPDATE
AS
Declare @TextPointer as Varbinary (16), @NewTextPointer as Varbinary (16), @Path
varchar(255), @Page as varchar(60), @DescriptiveText as varchar(7000)
If Update(DescriptiveText)
--Get the Path of the record from Inserted
Select @Page = Page, @Path = Path , @DescriptiveText = Cast(DescriptiveText as
Varchar(7000))
from Inserted
UPDATEAB
SETDescriptiveText = Cast (@DescriptiveText as Text)
WHEREPath = @Path
Rgds
GERI
Hi,
I am using following query to get insereted records from a table, which is containing a column, having text datatype.
'SELECT * INTO #TEMP FROM INSERTED'
Then obviously it gives error.
Wat if i want to get all the columns from inserted table excluding the text datatype column, without giving the column names.
Thanks & Regards.
Shabber.
Dealing with 3rd party app that is somehow deleting records. Was going to put a delete trigger on the table so we can at least be notified of the delete and save the record. Great idea until I found out the table has a text data type for one of the fields which are'nt allowed on the delete or update portion of the trigger. Unfortunately the text data contains what we really need to retain. Tried doing a convert varchar and that would not work.
View 7 Replies View RelatedHi,I want to have all-in-one trigger, defined like this:CREATE TRIGGER MyInsertDeleteUpdateHandlerON MyTableFOR DELETE, INSERT, UPDATEASBEGIN(...)ENDNow, how can I tell why this trigger was fired (what event causedtrigger to be fired) - was it DELETE, INSERT or UPDATE?Is there something like this: @@event_type,so I could do for example IF (@@event_type = DELETE) (...)Of course I can create 3 triggers instead of 1, to be sure what eventfired my trigger.I can also count records in _deleted_, _inserted_ tables or to doJOINs with it. But, _inserted_ table is common for UPDATE and INSERTevents..Any suggestions?Thanks in advance.Hubert
View 5 Replies View RelatedHi,
I have a query regarding DML Triggers.
I have created a trigger ON a table AFTER Insert, Update staement. In the trigger's body I am making a call to a stored procedure. In the procedure, I want to know the Trigger invoked due to which event : insert or Update as I have to handle bith the cases differently.
But I am not able to find out any SQL server function or property which can distinguish between INSERT and Update events of a trigger.
Waiting for the needful.
Hi,
I have a query regarding DML Triggers.
I have created a trigger ON a table AFTER Insert, Update staement. In the trigger's body I am making a call to a stored procedure. In the procedure, I want to know the Trigger invoked due to which event : insert or Update as I have to handle bith the cases differently.
But I am not able to find out any SQL server function or property which can distinguish between INSERT and Update events of a trigger.
Waiting for the needful.
Hi,
I need to prevent modification/update to a field.
So I created a trigger. To take the data from DELETED table then replace the field data.
However, I have problem with one field which data type is text.
MS SQL always return me this error:
Cannot use text, ntext, or image columns in the 'inserted' and 'deleted' tables.
I use the following code to take the data from deleted table
DECLARE @ptrval varbinary(16)
SELECT @ptrval = TEXTPTR(NOTES )
FROM DELETED
I also tried simple Select statement
Select notes from deleted
What code should I use to take the deleted data
Please help.
Thanks in advance
This is nutty. I never got this error on my local machine. The only lower case m in the sql is by near the variable Ratingsum like in line 59.
[SqlException (0x80131904): Incorrect syntax near 'm'.An expression of non-boolean type specified in a context where a condition is expected, near 'type'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +925466 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800118 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932 System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) +196 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +269 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135 view_full_article.btnRating_Click(Object Src, EventArgs E) +565 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746</pre></code>
Here is my button click sub in its entirety:
1 Sub btnRating_Click(ByVal Src As Object, ByVal E As EventArgs)
2 'Variable declarations...
3 Dim articleid As Integer
4 articleid = Request.QueryString("aid")
5 Dim strSelectQuery, strInsertQuery As String
6 Dim strCon As String
7 Dim conMyConnection As New System.Data.SqlClient.SqlConnection()
8 Dim cmdMyCommand As New System.Data.SqlClient.SqlCommand()
9 Dim dtrMyDataReader As System.Data.SqlClient.SqlDataReader
10 Dim MyHttpAppObject As System.Web.HttpContext = _
11 System.Web.HttpContext.Current
12 Dim strRemoteAddress As String
13 Dim intSelectedRating, intCount As Integer
14 Dim Ratingvalues As Decimal
15 Dim Ratingnums As Decimal
16 Dim Stars As Decimal
17 Dim Comments As String
18 Dim active As Boolean = False
19 Me.lblRating.Text = ""
20 'Get the user's ip address and cast its type to string...
21 strRemoteAddress = CStr(MyHttpAppObject.Request.UserHostAddress)
22 'Build the query string. This time check to see if IP address has already rated this ID.
23 strSelectQuery = "SELECT COUNT(*) As RatingCount "
24 strSelectQuery += "FROM tblArticleRating WHERE Itemid=" & articleid
25 strSelectQuery += " AND ip = '" & strRemoteAddress & "'"
26 'Open the connection, and execute the query...
27 strCon = System.Web.Configuration.WebConfigurationManager.ConnectionStrings("sqlConnectionString").ConnectionString
28 conMyConnection.ConnectionString = strCon
29 conMyConnection.Open()
30 cmdMyCommand.Connection = conMyConnection
31 cmdMyCommand.CommandType = System.Data.CommandType.Text
32 cmdMyCommand.CommandText = strSelectQuery
33 intCount = cmdMyCommand.ExecuteScalar()
34 intSelectedRating = Int(Me.rbRating.Text)
35 conMyConnection.Close()
36 'Close the connection to release these resources...
37
38 If intCount = 0 Then 'The user hasn't rated the article
39 'before, so perform the insert...
40 strInsertQuery = "INSERT INTO tblArticleRating (rating, ip, itemID, comment, active) "
41 strInsertQuery += "VALUES ("
42 strInsertQuery += intSelectedRating & ", '"
43 strInsertQuery += strRemoteAddress & "', "
44 strInsertQuery += articleid & ", '"
45 strInsertQuery += comment.Text & "', '"
46 strInsertQuery += active & "'); "
47 cmdMyCommand.CommandText = strInsertQuery
48 conMyConnection.Open()
49 cmdMyCommand.ExecuteNonQuery()
50 conMyConnection.Close()
51 Me.lblRating.Text = "Thanks for your vote!"
52 Comments = comment.Text.ToString
53
54 If Len(Comments) > 0 Then
55 emailadmin(comment.Text, articleid)
56 End If
57 'now update the article db for the two values but first get the correct ratings for the article
58 strSelectQuery = _
59 "SELECT SUM(rating) As RatingSum, COUNT(*) As RatingCount "
60 strSelectQuery += "FROM tblArticleRating WHERE Itemid=" & articleid
61 conMyConnection.Open()
62 cmdMyCommand.CommandText = strSelectQuery
63 dtrMyDataReader = cmdMyCommand.ExecuteReader()
64 dtrMyDataReader.Read()
65 Ratingvalues = Convert.ToDecimal(dtrMyDataReader("RatingSum").ToString)
66 Ratingnums = Convert.ToDecimal(dtrMyDataReader("RatingCount").ToString)
67 Stars = Ratingvalues / Ratingnums
68 conMyConnection.Close()
69 'Response.Write("Values: " & Ratingvalues)
70 'Response.Write("Votes: " & Ratingnums)
71
72 UpdateRating(articleid, Stars, Ratingnums)
73 Else 'The user has rated the article before, so display a message...
74 Me.lblRating.Text = "You've already rated this article"
75 End If
76 strSelectQuery = _
77 "SELECT SUM(rating) As RatingSum, COUNT(*) As RatingCount "
78 strSelectQuery += "FROM tblArticleRating WHERE Itemid=" & articleid
79 conMyConnection.Open()
80 cmdMyCommand.CommandText = strSelectQuery
81 dtrMyDataReader = cmdMyCommand.ExecuteReader()
82 dtrMyDataReader.Read()
83 Ratingvalues = Convert.ToDecimal(dtrMyDataReader("RatingSum").ToString)
84 Ratingnums = Convert.ToDecimal(dtrMyDataReader("RatingCount").ToString)
85 Stars = Ratingvalues / Ratingnums
86 If (Ratingnums = 1) And (Stars <= 1) Then
87 lblRatingCount.Text =" (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Vote"
88 ElseIf (Ratingnums = 1) And (Stars > 1) Then
89 lblRatingCount.Text = " (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Vote"
90 ElseIf (Ratingnums > 1) And (Stars <= 1) Then
91 lblRatingCount.Text =" (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Votes"
92 ElseIf (Ratingnums > 1) And (Stars > 1) Then
93 lblRatingCount.Text = " (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Votes"
94 End If
95
96 'Response.Write(String.Format("{0:f2}", Stars))
97 'Response.Write("Values: " & Ratingvalues)
98 'Response.Write("Votes: " & Ratingnums)
99 If (Stars > 0) And (Stars <= 0.5) Then
100 Me.Rating.ImageUrl ="./images/rating/05star.gif"
101 ElseIf (Stars > 0.5) And (Stars < 1.0) Then
102 Me.Rating.ImageUrl = "./images/rating/05star.gif"
103 ElseIf (Stars >= 1.0) And (Stars < 1.5) Then
104 Me.Rating.ImageUrl = "./images/rating/1star.gif"
105 ElseIf (Stars >= 1.5) And (Stars < 2.0) Then
106 Me.Rating.ImageUrl = "./images/rating/15star.gif"
107 ElseIf (Stars >= 2.0) And (Stars < 2.5) Then
108 Me.Rating.ImageUrl = "./images/rating/2star.gif"
109 ElseIf (Stars >= 2.5) And (Stars < 3.0) Then
110 Me.Rating.ImageUrl = "./images/rating/25star.gif"
111 ElseIf (Stars >= 3.0) And (Stars < 3.5) Then
112 Me.Rating.ImageUrl = "./images/rating/3star.gif"
113 ElseIf (Stars >= 3.5) And (Stars < 4.0) Then
114 Me.Rating.ImageUrl = "./images/rating/35star.gif"
115 ElseIf (Stars >= 4.0) And (Stars < 4.5) Then
116 Me.Rating.ImageUrl = "./images/rating/4star.gif"
117 ElseIf (Stars >= 4.5) And (Stars < 5.0) Then
118 Me.Rating.ImageUrl = "./images/rating/45star.gif"
119 ElseIf (Stars >= 4.5) And (Stars <= 5.0) Then
120 Me.Rating.ImageUrl = "./images/rating/5star.gif"
121 End If
122 dtrMyDataReader.Close()
123 conMyConnection.Close()
124 End Sub
If you want to reduplicate the error, click over here and try to submit a rating:
http://www.link-exchangers.com/view_full_article.aspx?aid=51
Thanks for helping me figure this out.
Happy Friday!
A while since I have posted a question, and this one is probably real easy.
I am trying to store numeric values from a php form in MSSQL 2000 database. However, the columns are set to float and if the value is 1.00, when entered into the table it is saved as 1
If I change the column type to money, the query fails, with an error message of conversion of datatype varchar to datatype money statement terminated.
anybody know what I need to do? do I need to do something in my query to specify that this is NOT varchar data?
I like to define my procedure parameter type to match a referenced table colum type,
similar to PL/SQL "table.column%type" notation.
That way, when the table column is changes, I would not have to change my stored proc.
Any suggestion?
Hi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
Implement time interval type in the form of a user defined type in SS2k8r2? Specifically an interval type described in the book Temporal Data and the Relational Model by C. J. Date at all. As an example, an interval is below:
1/4/2006:1/10/2006
which would mean the time period from 1/4 to 1/10.
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
I created a function called Temperature in VB to be used as a UDF in SQL2005. I get the error listed below. Any thoughts?
CREATE FUNCTION Temperature(@FluidName SQL_variant, @InpCode SQL_variant, @Units SQL_variant, @Prop1 SQL_variant, @Prop2 SQL_variant)
RETURNS Float
AS EXTERNAL NAME Fluids_VB6.[Fluids_VB6.FluidProperties.Fluids].Temperature
Then ran function:
select dbo.temperature('R22','t','e','225.6','0')
Got this:
Msg 6522, Level 16, State 2, Line 1
A .NET Framework error occurred during execution of user defined routine or aggregate 'Temperature':
System.InvalidCastException: Conversion from type 'SqlBoolean' to type 'Boolean' is not valid.
System.InvalidCastException:
at Microsoft.VisualBasic.CompilerServices.Conversions.ToBoolean(Object Value)
at Fluids_VB6.FluidProperties.Fluids.Setup(Object& FluidName)
at Fluids_VB6.FluidProperties.Fluids.CalcSetup(Object& FluidName, Object& InpCode, Object& Units, Object& Prop1, Object& Prop2)
at Fluids_VB6.FluidProperties.Fluids.CalcProp(Object& FluidName, Object& InpCode, Object& Units, Object& Prop1, Object& Prop2)
at Fluids_VB6.FluidProperties.Fluids.Temperature(Object FluidName, Object InpCode, Object Units, Object Prop1, Object Prop2)
Thanks
Buck
Hi all,
I am developing ASP.NET 1.1 application using VB.NET & SQL Server, on my machine I am using SQL Server 2000, and everything is working just fine.
The problem appears when I uploaded the site to the Host, they are using SQL Server 2005, is there any reason for this, I am using casting in the code, and I am sure there is something wrong with the hosting settings.
Any suggestions.
Best Regards
Wafi Mohtaseb
Hello Friends
How are you?? Friends i am getting problem in SQL Server 2005. I am deployng web application on production server as well as Databse also. In production server i inserted new field in all tables which is rowguid and its type is uniqueidentifier. The default binding for this field is newsequentialid(). In some pages it works ok but in some places it generates error like 'Conversion from type 'DBNull' to type 'String' is not valid'. Can anybody help me to solve this problem. Its urgent so plz reply me as soon as possible. I'll be very thankfull to you. Thanks in Advance.
Regards,
I have extensively revied both of the design methodologies and I cannot come up with a single clear reason to use one over the other!
Type - Attributes is where you have a table holding the type categories, type, a table holding the type attributes expected and then a table holding the type attribute value:
tbAutombbileCategories
CategoryID | Category
-------------------------------
1 | Car
2 | Truck
3 | Motorcycle
tbAutomobileAttributes
AttributeID | fkCategoryID | Attribute
-------------------------------------------
1 | 1 (car) | Doors
2 | 2 (truck) | Cab
3 | 2 (truck) | Capacity
tbAutomobile
VIN | Category | Make | Model
-------------------------------------
1 | 1 | Honda | Accord
2 | 2 | Ford | F150
tbAutomobileAttributeValues
fkVIN | fkAttributeID | Value
---------------------------------
1 | 1 | 2
2 | 1 | 0
2 | 2 | 1000
Now the above sure is flexible in the sence that a type of automobile can be added without affecting the database schema, but was if some attributes do not take a numeric value? How do you handle computations on attributes specific attributes? Why would I use this structure as opposed to the super type - sub type as shown below?
tbCategories
CategoryID | Category
--------------------------
1 | Cars
2 | Trucks
tbAutomobile (Super Type)
VIN | fkCategoryID | Make | Model
-------------------------------------
1 | 1 |Honda | Accord
tbCars
fkVIN | Doors |
-----------------
1 | 2
tbTrucks
fkVIN | Cab | Capacity
---------------------------
2 | 0 | 1000
Now, adding new sub types probably isn't very flexible but, now you can specify data types for each attribute instead of using sql_variant, which by the documentation cannot be used in aggregate functions and may render poor result when used with ADO.
Regardless of the method used, alot of back end coding is required for computations, what table to send the attributes, etc...
Can anyone please help me clarify. What method is best and why. So far I am leaning for option 2. More work but seems to be more flexible in the sence of customization of each datatype.
E.G., what if you wanted to specify attributes about the cap that can be supplied to trucks?
tbTrucks
fkVIN | Cab | Capacity | fkCapID
--------------------------------------
2 | Y | 1000 | 1
tbCaps
CapID | Vendor | Price | et....
Any thoughts at all? I thought this would have been a pretty damn hot topic!
Mike B
I'm trying to use the SSIS Execute SQL Task to pull XML from a SQL 2005 database table. The SQL is of the following form:
SELECT
(
SELECT
MT.MessageId 'MessageId',
MT.MessageType 'MessageType',
FROM MessageTable MT
ORDER BY MT.messageid desc
FOR XML PATH('MessageStatus'), TYPE
)
FOR XML PATH('Report'), TYPE
For some reason I can only get this query to work if I use an ADO.NET connection type. If I try to use something like the OLEDB connection I get the following error:
<ROOT><?MSSQLError HResult="0x80004005" Source="Microsoft XML Extensions to SQL Server" Description="No description provided"?></ROOT>
Can anyone tell me why the SELECT ... FOR XML PATH... seems only to work with ADO.NET connections?
Thanks
Walter
Hello --
I am having a UDT problem. When I run the Create Type command. I receive the "could not find type" error. I have seen other posts on here related to the default namespace in VB.NET. When I add the namespace I receive "Incorrect syntax near '.'." What is the format of the EXTERNAL NAME parameter. Thanks for any help. Code below...
Incorrect Syntax Error:
DROP ASSEMBLY CadSqlUdtsCREATE ASSEMBLY CadSqlUdtsAUTHORIZATION [dbo]FROM 'E:CAD.NETCADUDTsReleaseCadSqlUdts.dll'WITH PERMISSION_SET = SAFEGOCREATE TYPE dbo.ReportingAreaUDTEXTERNAL NAME CadSqlUdts.[CadSqlUdts.CadSqlUdts].ReportingAreaUDT;GO
Could Not Find Type Error:
DROP ASSEMBLY CadSqlUdtsCREATE ASSEMBLY CadSqlUdtsAUTHORIZATION [dbo]FROM 'E:CAD.NETCADUDTsReleaseCadSqlUdts.dll'WITH PERMISSION_SET = SAFEGOCREATE TYPE dbo.ReportingAreaUDTEXTERNAL NAME CadSqlUdts.ReportingAreaUDT;GO
What's up??
Hey,
I'm new to this whole SQL Server 2005 thing as well as database design and I've read up on various ways I can integrate business constraints into my database. I'm not sure which way applies to me, but I could use a helping hand in the right direction.
A quick explanation of the various tables I'm dealing with:
WBS - the Work Breakdown Structure, for example: A - Widget 1, AA - Widget 1 Subsystem 1, and etc.
Impacts - the Risk or Opportunity impacts for the weights of a part/assembly. (See Assemblies have Impacts below)
Allocations - the review of the product in question, say Widget 1, in terms of various weight totals, including all parts. Example - September allocation, Initial Demo allocation, etc. Mostly used for weight history and trending
Parts - There are hundreds of Parts which will eventually lead to thousands. Each part has a WBS element. [Seems redundant, but parts are managed in-house, and WBS elements are cross-company and issued by the Government]
Parts have Allocations - For weight history and trending (see Allocations). Example, Nut 17 can have a September 1st allocation, a September 5th allocation, etc.
Assemblies - Parts are assemblies by themselves and can belong to multiple assemblies. Now, there can be multiple parts on a product, say, an unmanned ground vehicle (UGV), and so those parts can belong to a higher "assembly" [For example, there can be 3 Nut 17's (lower assembly) on Widget 1 Subsystem 2 (higher assembly) and 4 more on Widget 1 Subsystem 5, etc.]. What I'm concerned about is ensuring that the weight roll-ups are accurate for all of the assemblies.
Assemblies have Impacts - There is a risk and opportunity impact setup modeled into this design to allow for a risk or opportunity to be marked on a per-assembly level. That's all this table represents.
A part is allocated a weight and then assigned to an assembly. The Assemblies table holds this hierarchical information - the lower assembly and the higher one, both of which are Parts entries in the [Parts have Allocations] table.
Therefore, to ensure proper weight roll ups in the [Parts have Allocations] table on a per part-basis, I would like to check for any inserts, updates, deletes on both the [Parts have Allocations] table as well as the [Assemblies] table and then re-calculate the weight roll up for every assembly. Now, I'm not sure if this is a huge performance hog, but I do need to keep all the information as up-to-date and as accurate as possible. As such, I'm not sure which method is even correct, although it seems an AFTER DML trigger is in order (from what I've gathered thus far). Keep in mind, this trigger needs to go through and check every WBS or Part and then go through and check all of it's associated assemblies and then ensure the weights are correct by re-summing the weights listed.
If you need the design or create script (table layout), please let me know.
Thanks.
Are there any limitations or gotchas to updating the same table whichfired a trigger from within the trigger?Some example code below. Hmmm.... This example seems to be workingfine so it must be something with my specific schema/code. We'reworking on running a SQL trace but if anybody has any input, fireaway.Thanks!create table x(Id int,Account varchar(25),Info int)GOinsert into x values ( 1, 'Smith', 15);insert into x values ( 2, 'SmithX', 25);/* Update trigger tu_x for table x */create trigger tu_xon xfor updateasbegindeclare @TriggerRowCount intset @TriggerRowCount = @@ROWCOUNTif ( @TriggerRowCount = 0 )returnif ( @TriggerRowCount > 1 )beginraiserror( 'tu_x: @@ROWCOUNT[%d] Trigger does not handle @@ROWCOUNT[color=blue]> 1 !', 17, 127, @TriggerRowCount) with seterror, nowait[/color]returnendupdate xsetAccount = left( i.Account, 24) + 'X',Info = i.Infofrom deleted, inserted iwhere x.Account = left( deleted.Account, 24) + 'X'endupdate x set Account = 'Blair', Info = 999 where Account = 'Smith'
View 1 Replies View RelatedThis Audit Trigger is Generic (i.e. non-"Table Specific") attach it to any tabel and it should work. Be sure and create the 'Audit' table first though.
The following code write audit entries to a Table called
'Audit'
with columns
'ActionType' //varchar
'TableName' //varchar
'PK' //varchar
'FieldName' //varchar
'OldValue' //varchar
'NewValue' //varchar
'ChangeDateTime' //datetime
'ChangeBy' //varchar
using System;
using System.Data;
using System.Data.SqlClient;
using Microsoft.SqlServer.Server;
public partial class Triggers
{
//A Generic Trigger for Insert, Update and Delete Actions on any Table
[Microsoft.SqlServer.Server.SqlTrigger(Name = "AuditTrigger", Event = "FOR INSERT, UPDATE, DELETE")]
public static void AuditTrigger()
{
SqlTriggerContext tcontext = SqlContext.TriggerContext; //Trigger Context
string TName; //Where we store the Altered Table's Name
string User; //Where we will store the Database Username
DataRow iRow; //DataRow to hold the inserted values
DataRow dRow; //DataRow to how the deleted/overwritten values
DataRow aRow; //Audit DataRow to build our Audit entry with
string PKString; //Will temporarily store the Primary Key Column Names and Values here
using (SqlConnection conn = new SqlConnection("context connection=true"))//Our Connection
{
conn.Open();//Open the Connection
//Build the AuditAdapter and Mathcing Table
SqlDataAdapter AuditAdapter = new SqlDataAdapter("SELECT * FROM Audit WHERE 1=0", conn);
DataTable AuditTable = new DataTable();
AuditAdapter.FillSchema(AuditTable, SchemaType.Source);
SqlCommandBuilder AuditCommandBuilder = new SqlCommandBuilder(AuditAdapter);//Populates the Insert command for us
//Get the inserted values
SqlDataAdapter Loader = new SqlDataAdapter("SELECT * from INSERTED", conn);
DataTable inserted = new DataTable();
Loader.Fill(inserted);
//Get the deleted and/or overwritten values
Loader.SelectCommand.CommandText = "SELECT * from DELETED";
DataTable deleted = new DataTable();
Loader.Fill(deleted);
//Retrieve the Name of the Table that currently has a lock from the executing command(i.e. the one that caused this trigger to fire)
SqlCommand cmd = new SqlCommand("SELECT object_name(resource_associated_entity_id) FROM
ys.dm_tran_locks WHERE request_session_id = @@spid and resource_type = 'OBJECT'", conn);
TName = cmd.ExecuteScalar().ToString();
//Retrieve the UserName of the current Database User
SqlCommand curUserCommand = new SqlCommand("SELECT system_user", conn);
User = curUserCommand.ExecuteScalar().ToString();
//Adapted the following command from a T-SQL audit trigger by Nigel Rivett
//http://www.nigelrivett.net/AuditTrailTrigger.html
SqlDataAdapter PKTableAdapter = new SqlDataAdapter(@"SELECT c.COLUMN_NAME
from INFORMATION_SCHEMA.TABLE_CONSTRAINTS pk ,
INFORMATION_SCHEMA.KEY_COLUMN_USAGE c
where pk.TABLE_NAME = '" + TName + @"'
and CONSTRAINT_TYPE = 'PRIMARY KEY'
and c.TABLE_NAME = pk.TABLE_NAME
and c.CONSTRAINT_NAME = pk.CONSTRAINT_NAME", conn);
DataTable PKTable = new DataTable();
PKTableAdapter.Fill(PKTable);
switch (tcontext.TriggerAction)//Switch on the Action occuring on the Table
{
case TriggerAction.Update:
iRow = inserted.Rows[0];//Get the inserted values in row form
dRow = deleted.Rows[0];//Get the overwritten values in row form
PKString = PKStringBuilder(PKTable, iRow);//the the Primary Keys and There values as a string
foreach (DataColumn column in inserted.Columns)//Walk through all possible Table Columns
{
if (!iRow[column.Ordinal].Equals(dRow[column.Ordinal]))//If value changed
{
//Build an Audit Entry
aRow = AuditTable.NewRow();
aRow["ActionType"] = "U";//U for Update
aRow["TableName"] = TName;
aRow["PK"] = PKString;
aRow["FieldName"] = column.ColumnName;
aRow["OldValue"] = dRow[column.Ordinal].ToString();
aRow["NewValue"] = iRow[column.Ordinal].ToString();
aRow["ChangeDateTime"] = DateTime.Now.ToString();
aRow["ChangedBy"] = User;
AuditTable.Rows.InsertAt(aRow, 0);//Insert the entry
}
}
break;
case TriggerAction.Insert:
iRow = inserted.Rows[0];
PKString = PKStringBuilder(PKTable, iRow);
foreach (DataColumn column in inserted.Columns)
{
//Build an Audit Entry
aRow = AuditTable.NewRow();
aRow["ActionType"] = "I";//I for Insert
aRow["TableName"] = TName;
aRow["PK"] = PKString;
aRow["FieldName"] = column.ColumnName;
aRow["OldValue"] = null;
aRow["NewValue"] = iRow[column.Ordinal].ToString();
aRow["ChangeDateTime"] = DateTime.Now.ToString();
aRow["ChangedBy"] = User;
AuditTable.Rows.InsertAt(aRow, 0);//Insert the Entry
}
break;
case TriggerAction.Delete:
dRow = deleted.Rows[0];
PKString = PKStringBuilder(PKTable, dRow);
foreach (DataColumn column in inserted.Columns)
{
//Build and Audit Entry
aRow = AuditTable.NewRow();
aRow["ActionType"] = "D";//D for Delete
aRow["TableName"] = TName;
aRow["PK"] = PKString;
aRow["FieldName"] = column.ColumnName;
aRow["OldValue"] = dRow[column.Ordinal].ToString();
aRow["NewValue"] = null;
aRow["ChangeDateTime"] = DateTime.Now.ToString();
aRow["ChangedBy"] = User;
AuditTable.Rows.InsertAt(aRow, 0);//Insert the Entry
}
break;
default:
//Do Nothing
break;
}
AuditAdapter.Update(AuditTable);//Write all Audit Entries back to AuditTable
conn.Close(); //Close the Connection
}
}
//Helper function that takes a Table of the Primary Key Column Names and the modified rows Values
//and builds a string of the form "<PKColumn1Name=Value1>,PKColumn2Name=Value2>,......"
public static string PKStringBuilder(DataTable primaryKeysTable, DataRow valuesDataRow)
{
string temp = String.Empty;
foreach (DataRow kColumn in primaryKeysTable.Rows)//for all Primary Keys of the Table that is being changed
{
temp = String.Concat(temp, String.Concat("<", kColumn[0].ToString(), "=", valuesDataRow[kColumn[0].ToString)].ToString(), ">,"));
}
return temp;
}
}
The trick was getting the Table Name and the Primary Key Columns.
I hope this code is found useful.
Comments and Suggestion will be much appreciated.
Table 1
First_Name
Middle_Name
Surname
John
Ian
Lennon
Mike
Buffalo
Tyson
Tom
Finney
Jones
Table 2
ID
F
M
S
DOB
1
Athony
Harold
Wilson
24/4/67
2
Margaret
Betty
Thathcer
1/1/1808
3
John
Ian
Lennon
2/2/1979
4
Mike
Buffalo
Tyson
3/4/04
5
Tom
Finney
Jones
1/1/2000
I want to be able to create a trigger that updates table 2 when a row is inserted into table 1. However I€™m not sure how to increment the ID in table 2 or to update only the row that has been inserted.
A
ID
Name
1
Joe
2
Fred
3
Ian
4
Bill
B
ID
1
4
I want to be able to create a trigger so that when a row is inserted into table A by a specific user then the ID will appear in table B. Is it possible to find out the login id of the user inserting a row?
I believe the trigger should look something like this:
create trigger test_trigger
on a
for insert
as
insert into b(ID)
select i.id
from inserted i
where
--specific USER
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
Dear all,
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String
Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If
Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)
With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)
.ExecuteNonQuery()
End With
End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)
End Sub
Public Sub New()
End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub
Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class
Thanks a lot for your help
I get the following message in the vs2005 querybuilder when i do a preview:
***********************************
SQL Execution Error.
Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)
Error Source: SQL Server Compact Edition ADO.NET Data Provider
Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************
The same querypreview works fine without the parameter:
SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)
Can anybody tell me why this is?
And tell me a way to get the tableadapter working?
Anne-Jan Tuinstra
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedI have a ntext column which stores rows of xml data. Ive decided that the best way to query the xml data is to Convert the ntext data into xml data type and use Sql Server 2005 builtin Xml Query tools to perform FLWOR expressions. The problem Im having is getting the ntext data Converted to xml.When I try to convert the ntext text, I of course get an error that local variables of ntext type are invalid.Any suggestions on a way I might accomplish this?Thanks, -lance
View 1 Replies View RelatedHi
Is it possibly in SqlDataSource's SelectCommad to convert a text-type value to a date-type value (11/1/2008 (text) -> 11/1/2008 (date) ) , so that order by can be used. Or is the other ways to use order by correctly with text-type (date)values
Thanks.
I'm getting this error on a vb.net page the needs to execute two separate stored procedures. The first one, is the main insert, and returns the identity value for the ClientID. The second stored procedure inserts data, but needs to insert the ClientID returned in the first stored procedure. What am I doing wrong with including the identity value "ClientID" in the second stored procedure?
Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'.Source Error:
Line 14: If li.Selected Then
Line 15: InsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.Value
Line 16: InsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")
Line 17:
Line 18:
Source File: C:InetpubwwwrootIntranetExternalAppsNewEmploymentClientNewClient.aspx.vb Line: 16
Here is my code behind... What am I doing wrong with grabbing the ClientID from the first stored procedure insert?
Protected Sub InsertNewClient_Inserted(ByVal sender As Object, ByVal e As SqlDataSourceStatusEventArgs)ClientID.Text = e.Command.Parameters("@ClientID").Value.ToString()ViewState("ClientID") = e.Command.Parameters("@ClientID").Value.ToString()End SubProtected Sub Submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit.ClickInsertNewClient.Insert()For Each li As ListItem In CompanyTypeID.Items
If li.Selected ThenInsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.ValueInsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")InsertClientCompanyType.Insert()End IfNextEnd Sub
I have an application which runs successfully on a couple of my customer's machines but fails on a third. It seems to fail when opening the database:
Unable to cast COM object of type 'ADODB.CommandClass' to interface type 'ADODB._Command'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{B08400BD-F9D1-4D02-B856-71D5DBA123E9}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=false; Initial Catalog=lensdb;Data Source = SQL
Before I got this error I was getting another problem (sorry didn't make a copy of that error's text) that made me think that adodb.dll simply wasn't loaded/registered. I got rid of that error by copying my adodb.dll onto the third machine and running gacutil /i. There is now an entry in winntassemblies for adodb.
Just in case you think it could be an obvious registry problem: when I started getting the current error I thought that maybe the registry needed updating and I merged the following lines into onto the target machine (from my dev machine):
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}]
@="_Command"
[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid]
@="{00020424-0000-0000-C000-000000000046}"
[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid32]
@="{00020424-0000-0000-C000-000000000046}"
[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}TypeLib]
@="{EF53050B-882E-4776-B643-EDA472E8E3F2}"
"Version"="2.7"
[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}]
@="_Command"
[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid]
@="{00020424-0000-0000-C000-000000000046}"
[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid32]
@="{00020424-0000-0000-C000-000000000046}"
[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}TypeLib]
@="{EF53050B-882E-4776-B643-EDA472E8E3F2}"
"Version"="2.7"
but, no change alas.
All three machines are running Windows 2000.
Any advice would be appreciated.
Thanks in advance,
Ross