Hello Everybody,
I would like to know which version of sql server I could install locally in my personal laptop where i can create new databases and use the enterprise manager???
Thanks for suggestions,
Ed.
Hi all,
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Thank you very much
Tony
Hi,
I have 2 SQL7’s set-up running on two NT servers and 1 SQL7 setup in Win98. I can register all three servers in the Win98 enterprise manager BUT when I go over to the NT computers I can only see the two NT SQL servers. In other words, the I can’t register the Win98 Server in an Enterprise Manager running on either of the NT boxes. I guessing the problem has something to do with the networking protocols, (Win98 SQL7 Servers do not support Named Pipes).
What should I do to see the Win98 server in an enterprise manager running on a remote computer?
Thanks in advance,
Kevin
I am running MS SQL 2000.I recently ran a procedure in Query Analyzer from the Master db toclear out all replication information so I could start/recreate itagain.After I ran this procedure Enterprise Manager no longer showed theregistered server in the tree. When I tried to re-register it gave methe following message:"A connection could not be established to ([Database Name])""Reason: [SQL-DMO]Sql Server ([Database Name]) must be upgraded toversion 7.0 or later to be administered by this version of SQL-DMO""Please verify that sql is running and check your SQL serverregistration properties (by right click on the ([Database Name]) node)and try again."I ran the following procedure:<code>exec sp_configure N'allow updates', 1goreconfigure with overridegoDECLARE @name varchar(129)DECLARE @username varchar(129)DECLARE @insname varchar(129)DECLARE @delname varchar(129)DECLARE @updname varchar(129)set @insname=''set @updname=''set @delname=''DECLARE list_triggers CURSOR FORselect distinct replace(artid,'-',''), sysusers.name fromsysmergearticles,sysobjects, sysusers wheresysmergearticles.objid=sysobjects.idand sysusers.uid=sysobjects.uidOPEN list_triggersFETCH NEXT FROM list_triggers INTO @name, @usernameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping trigger ins_' +@nameselect @insname='drop trigger ' +@username+'.ins_'+@nameexec (@insname)PRINT 'dropping trigger upd_' +@nameselect @updname='drop trigger ' +@username+'.upd_'+@nameexec (@delname)PRINT 'dropping trigger del_' +@nameselect @delname='drop trigger ' +@username+'.del_'+@nameexec (@updname)FETCH NEXT FROM list_triggers INTO @name, @usernameENDCLOSE list_triggersDEALLOCATE list_triggersgoif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[syspublications]') and OBJECTPROPERTY(id,N'IsUserTable')= 1) begin DECLARE @name varchar(129)DECLARE list_pubs CURSOR FORSELECT name FROM syspublicationsOPEN list_pubsFETCH NEXT FROM list_pubs INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping publication ' +@nameEXEC sp_dropsubscription @publication=@name, @article='all',@subscriber='all'EXEC sp_droppublication @nameFETCH NEXT FROM list_pubs INTO @nameENDCLOSE list_pubsDEALLOCATE list_pubsendGODECLARE @name varchar(129)DECLARE list_replicated_tables CURSOR FORSELECT name FROM sysobjects WHERE replinfo <>0UNIONSELECT name FROM sysmergearticlesOPEN list_replicated_tablesFETCH NEXT FROM list_replicated_tables INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'unmarking replicated table ' +@name--select @name='drop Table ' + @nameEXEC sp_msunmarkreplinfo @nameFETCH NEXT FROM list_replicated_tables INTO @nameENDCLOSE list_replicated_tablesDEALLOCATE list_replicated_tablesGOUPDATE syscolumns set colstat = colstat & ~4096 WHERE colstat &4096<>0GOUPDATE sysobjects set replinfo=0GODECLARE @name nvarchar(129)DECLARE list_views CURSOR FORSELECT name FROM sysobjects WHERE type='V' and (name like 'syncobj_%'ornamelike 'ctsv_%' or name like 'tsvw_%' or name like 'ms_bi%')OPEN list_viewsFETCH NEXT FROM list_views INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping View ' +@nameselect @name='drop View ' + @nameEXEC sp_executesql @nameFETCH NEXT FROM list_views INTO @nameENDCLOSE list_viewsDEALLOCATE list_viewsGODECLARE @name nvarchar(129)DECLARE list_procs CURSOR FORSELECT name FROM sysobjects WHERE type='p' and (name like 'sp_ins_%'ornamelike 'sp_MSdel_%' or name like 'sp_MSins_%'or name like 'sp_MSupd_%' ornamelike 'sp_sel_%' or name like 'sp_upd_%')OPEN list_procsFETCH NEXT FROM list_procs INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping procs ' +@nameselect @name='drop procedure ' + @nameEXEC sp_executesql @nameFETCH NEXT FROM list_procs INTO @nameENDCLOSE list_procsDEALLOCATE list_procsGODECLARE @name nvarchar(129)DECLARE list_conflict_tables CURSOR FORSELECT name From sysobjects WHERE type='u' and name like '_onflict%'OPEN list_conflict_tablesFETCH NEXT FROM list_conflict_tables INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping conflict_tables ' +@nameselect @name='drop Table ' + @nameEXEC sp_executesql @nameFETCH NEXT FROM list_conflict_tables INTO @nameENDCLOSE list_conflict_tablesDEALLOCATE list_conflict_tablesGOUPDATE syscolumns set colstat=2 WHERE name='rowguid'GODeclare @name nvarchar(200), @constraint nvarchar(200)DECLARE list_rowguid_constraints CURSOR FORselect sysusers.name+'.'+object_name(sysobjects.parent_ob j),sysobjects.namefrom sysobjects, syscolumns,sysusers where sysobjects.type ='d' andsyscolumns.id=sysobjects.parent_objand sysusers.uid=sysobjects.uidand syscolumns.name='rowguid'OPEN list_rowguid_constraintsFETCH NEXT FROM list_rowguid_constraints INTO @name, @constraint WHILE@@FETCH_STATUS = 0 BEGINPRINT 'dropping rowguid constraints ' +@nameselect @name='ALTER TABLE ' + rtrim(@name) + ' DROP CONSTRAINT '+@constraintprint @nameEXEC sp_executesql @nameFETCH NEXT FROM list_rowguid_constraints INTO @name, @constraint ENDCLOSE list_rowguid_constraintsDEALLOCATE list_rowguid_constraintsGODeclare @name nvarchar(129), @constraint nvarchar(129)DECLARE list_rowguid_indexes CURSOR FORselect sysusers.name+'.'+object_name(sysindexes.id), sysindexes.namefromsysindexes, sysobjects,sysusers where sysindexes.name like 'index%' andsysobjects.id=sysindexes.id and sysusers.uid=sysobjects.uidOPEN list_rowguid_indexesFETCH NEXT FROM list_rowguid_indexes INTO @name, @constraint WHILE@@FETCH_STATUS = 0 BEGINPRINT 'dropping rowguid indexes ' +@nameselect @name='drop index ' + rtrim(@name ) + '.' +@constraintEXEC sp_executesql @nameFETCH NEXT FROM list_rowguid_indexes INTO @name, @constraint ENDCLOSE list_rowguid_indexesDEALLOCATE list_rowguid_indexesGODeclare @name nvarchar(129), @constraint nvarchar(129)DECLARE list_ms_bidi_tables CURSOR FORselect sysusers.name+'.'+sysobjects.name fromsysobjects,sysusers where sysobjects.name like 'ms_bi%'and sysusers.uid=sysobjects.uidand sysobjects.type='u'OPEN list_ms_bidi_tablesFETCH NEXT FROM list_ms_bidi_tables INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping ms_bidi ' +@nameselect @name='drop table ' + rtrim(@name )EXEC sp_executesql @nameFETCH NEXT FROM list_ms_bidi_tables INTO @nameENDCLOSE list_ms_bidi_tablesDEALLOCATE list_ms_bidi_tablesGODeclare @name nvarchar(129)DECLARE list_rowguid_columns CURSOR FORselect sysusers.name+'.'+object_name(syscolumns.id) from syscolumns,sysobjects,sysusers where syscolumns.name like 'rowguid' andobject_Name(sysobjects.id) not like 'msmerge%'and sysobjects.id=syscolumns.idand sysusers.uid=sysobjects.uidand sysobjects.type='u' order by 1OPEN list_rowguid_columnsFETCH NEXT FROM list_rowguid_columns INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping rowguid columns ' +@nameselect @name='Alter Table ' + rtrim(@name ) + ' drop column rowguid'print @nameEXEC sp_executesql @nameFETCH NEXT FROM list_rowguid_columns INTO @nameENDCLOSE list_rowguid_columnsDEALLOCATE list_rowguid_columnsgoDeclare @name nvarchar(129)DECLARE list_views CURSOR FORselect name From sysobjects where type ='v' and status =-1073741824 andname<>'sysmergeextendedarticlesview'OPEN list_viewsFETCH NEXT FROM list_views INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping replication views ' +@nameselect @name='drop view ' + rtrim(@name )print @nameEXEC sp_executesql @nameFETCH NEXT FROM list_views INTO @nameENDCLOSE list_viewsDEALLOCATE list_viewsgoDeclare @name nvarchar(129)DECLARE list_procs CURSOR FORselect name From sysobjects where type ='p' and status = -536870912OPEN list_procsFETCH NEXT FROM list_procs INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping replication procedure ' +@nameselect @name='drop procedure ' + rtrim(@name )print @nameEXEC sp_executesql @nameFETCH NEXT FROM list_procs INTO @nameENDCLOSE list_procsDEALLOCATE list_procsgoif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergepublications]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergepublicationsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergesubscriptions]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergesubscriptionsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[syssubscriptions]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM syssubscriptionsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysarticleupdates]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysarticleupdatesGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[systranschemas]') and OBJECTPROPERTY(id,N'IsUserTable')= 1)DELETE FROM systranschemasGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergearticles]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergearticlesGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergeschemaarticles]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergeschemaarticlesGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergesubscriptions]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergesubscriptionsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysarticles]') and OBJECTPROPERTY(id,N'IsUserTable') =1)DELETE FROM sysarticlesGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysschemaarticles]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysschemaarticlesGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[syspublications]') and OBJECTPROPERTY(id,N'IsUserTable')= 1)DELETE FROM syspublicationsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergeschemachange]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergeschemachangeGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergesubsetfilters]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergesubsetfiltersGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSdynamicsnapshotjobs]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSdynamicsnapshotjobsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSdynamicsnapshotviews]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSdynamicsnapshotviewsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_altsyncpartners]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_altsyncpartnersGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_contents]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_contentsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_delete_conflicts]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_delete_conflictsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_errorlineage]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_errorlineageGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_genhistory]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_genhistoryGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_replinfo]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_replinfoGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_tombstone]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_tombstoneGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSpub_identity_range]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSpub_identity_rangeGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSrepl_identity_range]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSrepl_identity_rangeGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSreplication_subscriptions]') andOBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSreplication_subscriptionsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSsubscription_agents]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSsubscription_agentsGOif not exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[syssubscriptions]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)create table syssubscriptions (artid int, srvid smallint, dest_dbsysname,status tinyint, sync_type tinyint, login_name sysname,subscription_typeint, distribution_jobid binary, timestamp timestamp,update_modetinyint,loopback_detection tinyint, queued_reinit bit)CREATE TABLE [dbo].[syspublications] ([description] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[name] [sysname] NOT NULL ,[pubid] [int] IDENTITY (1, 1) NOT NULL ,[repl_freq] [tinyint] NOT NULL ,[status] [tinyint] NOT NULL ,[sync_method] [tinyint] NOT NULL ,[snapshot_jobid] [binary] (16) NULL ,[independent_agent] [bit] NOT NULL ,[immediate_sync] [bit] NOT NULL ,[enabled_for_internet] [bit] NOT NULL ,[allow_push] [bit] NOT NULL ,[allow_pull] [bit] NOT NULL ,[allow_anonymous] [bit] NOT NULL ,[immediate_sync_ready] [bit] NOT NULL ,[allow_sync_tran] [bit] NOT NULL ,[autogen_sync_procs] [bit] NOT NULL ,[retention] [int] NULL ,[allow_queued_tran] [bit] NOT NULL ,[snapshot_in_defaultfolder] [bit] NOT NULL ,[alt_snapshot_folder] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[pre_snapshot_script] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[post_snapshot_script] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[compress_snapshot] [bit] NOT NULL ,[ftp_address] [sysname] NULL ,[ftp_port] [int] NOT NULL ,[ftp_subdirectory] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[ftp_login] [sysname] NULL ,[ftp_password] [nvarchar] (524) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[allow_dts] [bit] NOT NULL ,[allow_subscription_copy] [bit] NOT NULL ,[centralized_conflicts] [bit] NULL ,[conflict_retention] [int] NULL ,[conflict_policy] [int] NULL ,[queue_type] [int] NULL ,[ad_guidname] [sysname] NULL ,[backward_comp_level] [int] NOT NULL) ON [PRIMARY]GOcreate view sysextendedarticlesviewasSELECT *FROM sysarticlesUNION ALLSELECT artid, NULL, creation_script, NULL, description,dest_object,NULL, NULL, NULL, name, objid, pubid, pre_creation_cmd, status, NULL,type,NULL,schema_option, dest_ownerFROM sysschemaarticlesgoif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysarticles]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)drop table [dbo].[sysarticles]GOCREATE TABLE [dbo].[sysarticles] ([artid] [int] IDENTITY (1, 1) NOT NULL ,[columns] [varbinary] (32) NULL ,[creation_script] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_ASNULL,[del_cmd] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[description] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[dest_table] [sysname] NOT NULL ,[filter] [int] NOT NULL ,[filter_clause] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[ins_cmd] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[name] [sysname] NOT NULL ,[objid] [int] NOT NULL ,[pubid] [int] NOT NULL ,[pre_creation_cmd] [tinyint] NOT NULL ,[status] [tinyint] NOT NULL ,[sync_objid] [int] NOT NULL ,[type] [tinyint] NOT NULL ,[upd_cmd] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[schema_option] [binary] (8) NULL ,[dest_owner] [sysname] NULL) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]GOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysschemaarticles]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)drop table [dbo].[sysschemaarticles]GOCREATE TABLE [dbo].[sysschemaarticles] ([artid] [int] NOT NULL ,[creation_script] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_ASNULL,[description] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[dest_object] [sysname] NOT NULL ,[name] [sysname] NOT NULL ,[objid] [int] NOT NULL ,[pubid] [int] NOT NULL ,[pre_creation_cmd] [tinyint] NOT NULL ,[status] [int] NOT NULL ,[type] [tinyint] NOT NULL ,[schema_option] [binary] (8) NULL ,[dest_owner] [sysname] NULL) ON [PRIMARY]GOdeclare @dbname varchar(130)select @dbname ='sp_replicationdboption'+char(39)+db_name()+char(39)+',''merge publish'',''false'''exec (@dbname)select @dbname ='sp_replicationdboption'+char(39)+db_name()+char(39)+',''publish'',''fals e'''exec (@dbname)reconfigure with overridegoselect db_name()</code>Can any one please help me as this is a production machine and needsfixing ASAP.Regards,Ben
View 2 Replies View RelatedThis may be a dumb question but I have searched and haven't found an answer to it here yet.
We are planing to get SQL Server 2005 for a specific purpose.We have several existing stand alone SQL Server 2000 database servers already. I have Enterprise Manager (2000) client installed on my PC. I recently installed SQL Server Express (2005) on my PC to get to know about new features.
I have run into problems (BCP specifically) with having two versions of C:Program FilesMicrosoft SQL Server80... and C:Program FilesMicrosoft SQL Server90... on my PC.
Is there any point before or after we purchase Standard version of SQL Server 2005 when I can do away with C:Program FilesMicrosoft SQL Server80... and/or uninstall Enterprise manager?
In other words can I manage SQL Server 2000 databases using only Management Studio(SQL Server 2005 client)? If not, how do I manage the two different versions of the client software on a single PC.
Thanks,
Dave K.
Hi,Is it possible to install Enterprise Manager without to install theserver ?Thanks !--J-L M. (Alphomega)ICQ: 149635116Pour m'écrire, cliquer le lien ci-dessoushttp://cerbermail.com/?G5iYdBb2Ce
View 3 Replies View RelatedI know this can be done, but can't remember how I did it last time.
I have SQL 7.0 installed on a server which is located about 8 miles up the road. I don't have remote access to the server so I want to install SQL Enterprise Manager on my workstation - The installation of SQL tries to install the DB Engine too.
How do I just install Enterprise Manager?
Hi All,
I'm pretty new to SQL anything... I'm wondering if there is a way to install just Enterprise Manager on my local workstation so I can open it up and manage or at least look at all of the SQL db's that are spread out on various servers - all in one place?
1. How can I install just Enterprise Manager (if possible). I ran setup on SQL2000 Personal Addition and it didn't look like it was going to get to a 'custom setup' screen so I cancelled, it looked like it was going to install SQL Server 2000 and all components (maybe this is what I have to do, I don't know).
2. If I install SQL2000 Enterprise Manager, am I able to access and view SQL 6.5 and SQL 7.0 and SQL 2000 databases all together?
Thanks so much.
Chris
Hi,
We want to install SQL Enterprise Manager on a seperate server. Our provider for this server requires us to install SQL EM on a non-default drive/path, d:programs. How can I achieve this?
TIA,
Wim
After opening the Results Pane (though a query or open table); I frequently get the below message.
Is there any way to change the settings so the results pane will stay active for a long length of time?
Message
SQL Server Enterprise Manager
_______________________
Some time ago, you retrieved data from the database with the query or view whose name is XXXX. The returned rows appear in the Results Pane and the database continues to retain the result set in its local memory; which consumes valuable server resources. Because you have not recently used the Results pane, it will be AUTOMATICALLY CLEARED IN ONE MINUTE. The will empty the results pane, discard unsaved changes, and free resources on the database server. Then if you want to REESTABLISH the result set, you can rerun the query or view.
DO YOU WANT TO PROLONG YOUR WORK WITH THE RESULTS PANE AND CONTINUE TO CONSUME RESOURCES ON THE DATABASE SERVER?
--------------------------------------------------------------------
I want this to default to Yes, without this message comming up and if I don't click yes fast enough, my results are gone. I kinow the work arounds, but how can I default this to Yes or so this message stops displaying.
Thank you
watxnd@hotmail.com
Hi all,
I have downloaded Microsoft SQL Server 2005 Enterprise Evaluation Edition ISO from the following site and burned it onto a DVD.
http://www.microsoft.com/downloads/details.aspx?FamilyId=6931FA7F-C094-49A2-A050-2D07993566EC&displaylang=en
Prior to this I have installed Visual Studio 2005 Professional Edtion. During setup I have selected all the native client components i.e. Management Studio, Business Intelligense Studio. But after the install I am not able to see them under All Programs-> Microsoft SQL Server 2005. On further searching I have come across this link
http://channel9.msdn.com/ShowPost.aspx?PostID=142941
First of all, there is no sqlrun_tools.msi under setup folder of the dvd. And also when I tried to change component from Add/Remove programs and following the instructions as specified on clicking Change Installed components all that I see are: Connectivity Components and Software Development kit.
Could someone tell me how can I install Management Studio/ Business Intelligence Studio seperately? I don't want to go through the process of re-installation.
I am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
View 1 Replies View RelatedCan some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Thanks a milliom
Ning
Hello,
I installed the SQL Server 2k EnterPrise version and developer version on the same version, and the developer version is an instance "Development".
How do I expose both of them to internet? Just open both of them to port 1433? And on the client side, just say IP and IP/Development? Do I need specific set up, will they conflict?
Thanks,
Can I set up sql server 7.0 standard version in cluster enviorment, what the
different betwent sql server 7.0 enterprise version and standard version? any problem I may encouter when I install the SQL server 7.0 standard version in Cluster enviorment?
Thank you very much.
Judy
On one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
View 2 Replies View RelatedIF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies View RelatedHi,How can I tell If my sql server is MSDN or Standard or Enterpriseversion.Thank youAR
View 5 Replies View RelatedHello All,
i have sungard campus management system runing on MS SQL Server 2005 trial version, i have bought a new license for MS SQL Server 2005 Enterprise. can any body help me how to put the new license please.
thanks
Khaliq Yar
khaliq.haidary@yahoo.com
I have kind of an urgent need here. I need to know if there is a dll file or registry key or something of that nature that I can query on to find out if my SQL 2000 installations are Enterprise or Standard.
I understand I can do this using query analyser, but that will not work with my reporting tool (this is for reporting numbers of SQL installations in our very large enterprise for Microsoft license compliance).
Thanks for any guidance!!
Cheryl Marland
cheryl.marland@va.gov
I have SQL Server 2005 enterprise version, which I managed to install on my desktop which has xp home version operating system.
Now when I installed SQL Server 2005 enterprise on either my two laptops one has a XP-Pro and the other windows server 2003 operating systems.
The problem is that when I tried logging on sql server 2005 on either laptops, it prompts me to enter a server name and when I type in the name I believe is the server name it rejects it
During installation on the two laptops I remember seeing a warning on 1 out of 24 components/setups that sql server2005 installs. The warning was something to do with Server client. This warning never came up when I installed the same version on my desktop.
Please help €“ I am tearing head over this as I have spent the last two nights trying to get it to work on both laptops.
We have been using the 180 day evaluation version and I have my license key now for the purchased version. I read on the Microsoft site I am able to upgrade to the non-trial version without uninstalling the eval version. But it doesn't tell me HOW to do it. I was expecting a menu option, maybe on the About Screen of Management Studio to enter it. (How naive is that?) Is there a simple way to tell the Eval version I am now licensed?
TIA
Chris
I want to install sql server 2000 in my notebook computer (for development only), which edition shall i install, Personal or Developer edition?
Tks!
I have just purchased a laptop that runs Vista Business (a 32-bit operating system). I am installing Sql Server 2005 and the first thing that I've noticed on the setup disc is that there are three folders that I can install from:
1) SQL Server Itanium
2) SQL Server X64
3) SQL Server X32
My question is, which of the versions should I install? Since it's obvious that these different versions are binaries compiled to a specific chip set (I've already assumed that I can eliminate the X64 setup...), which of these setups is best for Windows Vista?
I installed SQL Server 2005 on a server running Windows Server 2003x64, and it installed into the "Program Files (x86)" directory, so Iassume it installed the 32-bit version. How do I get it to install the64-bit version? I don't see an option for this anywhere. I got the DVDat the MS launch conference a few months ago - does this even have the64-bit version on it?Thanks for any assistance,Seth
View 2 Replies View RelatedHi
has anyone used this tool to upload sql databases to a web host
i'm struggling
cheers!!!
Adrian
I installed SQL Server MSDE 2000 but I can't find how to start it. Does this package include an Enterprise Manager or not? I thought that maybe it was a standard XP Pro feature. I had no problem finding it in W2000 Pro.
View 1 Replies View RelatedWhen I open databases, there is nothing there - not even Master, Model, Temp, Pubs, etc.
When I open the query analyzer, however, they all appear in the drop down.
What is up with that? and how can I remedy?
OP sys:Win98
SQL Server 7
Has anyone encountered this error: When you are in Enterprise manager and you select a database then the tables tab and then you select a table and go to open table- select all rows, I get an error--An unexpected error happened during this operation-Query Designer encountered a query error! Please let me know if you have seen this. Also, when I access this from one networked computer I get the same error, then when I access it from another I do not!! The servers are interacting with Pivotal. The one that works does not!!
View 3 Replies View RelatedHi all,
I have SQL 7.0 desktop addition installed on my local win NT workstation. I am able to connect to my local server using Quary Analyser but when i am trying to connect using EM, i am not able to connect. I am receiveing the following error message.
__________________________________________________ ___________________________
A conncetion could not be established to "servername" - Specified SQL Server not found. ConnectionOpen(CreateFile()).
Please verify SQL server is running and check your SQL Server registration properties(by right clicking "servername" node) and try again.
__________________________________________________ ___________________________
I have tried as said in the error message and also tried connecting with "sa" but its not working. I can see that the server is running and i am able to connect through QA.
any help is highly appriciated.
We can no longer open tables in EM. The error message is;
An unexpected error happened during this operation
[Query] - Query Designer encountered a Query error:
Unspecified error
The tables are fine - can access them other ways.It looks as if the fault is in the script used by EM. Anyway to clear this ??
I am fairly new sql dba in a company and I am sure Enterprise Manager is installed on PC's and it shouldn't. Is there a way of finding out other then visiting each workstation. Thanks in advance..
View 1 Replies View RelatedI am considering upsizing my Access 2000 DB to a SQL 7 server. I was told that having SQL 7 Enterprise Manager is highly prefferd but not essential as I can maintain the upsized DB with Access 2000. The only way that I have been able to find JUST enterprise manager seems to be with purchasing the whole SQL 7 program for $1300! Microsoft cannot be that cruel, that you have to buy the whole program just for Enterprise Manager!
My questions are:
Can I download just MS SQL 7 Enterprise Manager anywhere for a reasonable fee or free?
and
if not, can I continue to use Access 2000 to maintain the SQL 7 upsized DB?