When Trying To Connect I Get The Following Error: No Process Is On The Other End Of The Pipe
Apr 28, 2008
I had to un-install and re-install SQL Server 2005 for a different problem which has been resolved.
But now when I try to make a connection to the database I get the following error:
"...No process is on the other end of the pipe"
I have verified that the server allows named pipeing which seems to be the common answer I found after searching. I have also verified that the account I use is setup and has all the proper permissions.
Can someone help me in resolving this issue noting what I have verified above???
Thanks...
View 4 Replies
ADVERTISEMENT
Jun 6, 2006
I downloaded MS Pet Shop 4.0 recently for best-practice training purposes. The installation went smoothly with a SQL Server 2005 backend. At first I had a problem authenticating the mspetshop4 user in the database, but that was solved by fixing some settings with the password policy. Now the mspetshop4 user is authenticated properly, but I came across this error instead:Server Error in '/Web' Application.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
Source Error:
Line 216:
Line 217: if (conn.State != ConnectionState.Open)
Line 218: conn.Open();
Line 219:
Line 220: cmd.Connection = conn;
Source File: C:Program FilesMicrosoft.NET Pet Shop 4.0DBUtilitySQLHelper.cs Line: 218
Stack Trace:
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +117
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346
System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) +619
System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) +224
System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) +113
System.Data.SqlClient.TdsParserStateObject.ReadBuffer() +59
System.Data.SqlClient.TdsParserStateObject.ReadByte() +36
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +181
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +56
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +1083
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +272
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +688
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +82
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +558
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +126
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +651
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +160
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +122
System.Data.SqlClient.SqlConnection.Open() +229
PetShop.DBUtility.SqlHelper.PrepareCommand(SqlCommand cmd, SqlConnection conn, SqlTransaction trans, CommandType cmdType, String cmdText, SqlParameter[] cmdParms) in C:Program FilesMicrosoft.NET Pet Shop 4.0DBUtilitySQLHelper.cs:218
PetShop.DBUtility.SqlHelper.ExecuteReader(String connectionString, CommandType cmdType, String cmdText, SqlParameter[] commandParameters) in C:Program FilesMicrosoft.NET Pet Shop 4.0DBUtilitySQLHelper.cs:127
PetShop.SQLServerDAL.Category.GetCategories() in C:Program FilesMicrosoft.NET Pet Shop 4.0SQLServerCategory.cs:27
PetShop.BLL.Category.GetCategories() in C:Program FilesMicrosoft.NET Pet Shop 4.0BLLCategory.cs:20
PetShop.Web.NavigationControl.BindCategories() in c:Program FilesMicrosoft.NET Pet Shop 4.0WebControlsNavigationControl.ascx.cs:53
PetShop.Web.NavigationControl.Page_Load(Object sender, EventArgs e) in c:Program FilesMicrosoft.NET Pet Shop 4.0WebControlsNavigationControl.ascx.cs:27
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +31
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +68
System.Web.UI.Control.OnLoad(EventArgs e) +88
System.Web.UI.Control.LoadRecursive() +74
System.Web.UI.Control.LoadRecursive() +158
System.Web.UI.BasePartialCachingControl.LoadRecursive() +61
System.Web.UI.Control.LoadRecursive() +158
System.Web.UI.Control.LoadRecursive() +158
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3035
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42Now I'm clueless. What does No process at the other end of the pipe mean?
View 2 Replies
View Related
Apr 7, 2008
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
View 10 Replies
View Related
Mar 18, 2007
I can use SQL Server Management Studio Express to connect to my local database SQL 2005 database on bknjisqlexpress.
I am also able to connect to the database from Visual Studio, and this is where I copied the following connection string to be used in my C# code
string myConnectString = "Data Source=BKFNJI\SQLEXPRESS;" +
"Initial Catalog=cmiCompatibilityDataBase" +
"Integrated Security=True;Pooling=False";
// specify SQL Server Specific Connection string
SqlConnection cmiDBCompConnection = new SqlConnection(myConnectString);
cmiDBCompConnection.Open();
when I attempt to run the apps, I get the
"System.Data.SqlClient.SqlException was unhandled
Message="A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)".....
any idea what I am doing wrong, given that the connection string works using other means? I am using Windows authentication.
To add, the error in my log shows:
2007-03-17 21:10:55.82 Logon Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <local machine>]
Thanks,
Klaus
View 1 Replies
View Related
Oct 22, 2006
I am getting the following error when i try to connect to the my web site using froma different server. A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) i am using sql express and i attach the database through the connection string in the web config. Any ideas
View 1 Replies
View Related
Apr 9, 2007
Hello all, I have question regarding the error message that I'm getting above. I have a program written in .NET that is suppose to traverse through a database and retrieve various records and then write a summary record. The code worked without issue. The database the used to hold the data was a SQL 7.0. However, recently I moved the server over to SQL 2005. Since that time I have been getting the following error:
Description: [Microsoft][SQL Native Client]Named Pipes Provider: No process is on the other end of the pipe.
ramdomly throughout the execution of the program. It doesn't happen on record and is intermittent when it occurs.
Here is the code that is having issues any help would be appreciated.
Thanks
Mike Gisonda
Dim mreleaseqty As Double
Dim mmakeqty As Double
Dim k As Integer
Dim mbackorderqty As Double
Dim mOnOrder As Double
Dim mOnHand As Double
Dim mMaximumqty As Double
Dim mMinimumQty As Double
Dim muomfactor As Double
Dim mSafetyStockQty As Double
Dim mQtyInTransit As Double
Dim mQtyAllocatedWip As Double
Dim mQtyAllocated As Double
Dim cnLean As New ADODB.Connection
Dim cnSyspro As New ADODB.Connection
Dim cnLean2 As New ADODB.Connection
Dim cmdPullItems As New ADODB.Command 'command to retrieve pull items
Dim cmdWHTotals As New ADODB.Command 'command to get combined warehouse totals
Dim cmdUpdatePull As New ADODB.Command
Dim cmdBkOrd As New ADODB.Command
Dim cmdInvMst As New ADODB.Command
Dim cmdInitPull As New ADODB.Command 'command to clean our old pull data
Dim prmStockCode As New ADODB.Parameter 'parameter to supply stockcode.
Dim rsPullItems As New ADODB.Recordset 'recordset to hold pull items.
Dim rsWHTotals As New ADODB.Recordset 'recordset to hold warehouse records
Dim rsBkOrd As New ADODB.Recordset
Dim rsInvMst As New ADODB.Recordset
Dim rsSalesOrders As New ADODB.Recordset
Dim rsWipMaster As New ADODB.Recordset
Dim mPullSQL As String
Dim mWHSql As String
Dim mBackOrderStr As String
Dim mInvSQL As String
Dim mStockCode As String
Dim mSalesSQL As String
Dim aBackOrderRec As Array
Dim mReqDate
Dim mShipDate As Date
Dim mcol As Integer
Dim mNewVal As Double
Dim mWipSql As String
Dim mAdjAmt As Double
Dim mStockStatus As Integer
Dim mBackOrder As Double
Dim mBackLate1 As Double
Dim mBackLate2 As Double
Dim mBackLate3 As Double
Dim mBackLate4 As Double
Dim mWeeklyStDev As Double
Dim mWeeklyUsage As Double
Dim mBackLog1 As Double
Dim mBackLog2 As Double
Dim mBackLog3 As Double
Dim mBackLog4 As Double
Dim mBackLog5 As Double
Dim mBackLog6 As Double
Dim mBackLog7 As Double
Dim mBackLog8 As Double
Dim mBackLog9 As Double
Dim mBackLog10 As Double
Dim mBackLog11 As Double
Dim mBackLog12 As Double
Dim mLEAN_BACKORDER_BFLAG As Integer
Dim mLEAN_LATE1_BFLAG As Integer
Dim mLEAN_LATE2_BFLAG As Integer
Dim mLEAN_LATE3_BFLAG As Integer
Dim mLEAN_LATE4_BFLAG As Integer
Dim mLEAN_BACKLOG1_BFLAG As Integer
Dim mLEAN_BACKLOG2_BFLAG As Integer
Dim mLEAN_BACKLOG3_BFLAG As Integer
Dim mLEAN_BACKLOG4_BFLAG As Integer
Dim mLEAN_BACKLOG5_BFLAG As Integer
Dim mLEAN_BACKLOG6_BFLAG As Integer
Dim mLEAN_BACKLOG7_BFLAG As Integer
Dim mLEAN_BACKLOG8_BFLAG As Integer
Dim mLEAN_BACKLOG9_BFLAG As Integer
Dim mLEAN_BACKLOG10_BFLAG As Integer
Dim mLEAN_BACKLOG11_BFLAG As Integer
Dim mLEAN_BACKLOG12_BFLAG As Integer
Dim mBFlagValue As Integer
Dim mFileNum As Integer
Dim mTrnFileNum As Integer
Dim mtest As String
Dim mCountOfRecords As Long
Dim mPullCount As String
Dim rsPullcount As ADODB.Recordset
Dim mCurRecordCount As Long
Dim mWipAllSQL As String
Dim rsWipAll As New ADODB.Recordset
'On Error GoTo ehbtnUpdateLean_Click
'open connection to springdesign
With cnLean
.ConnectionString = "DSN=SPRINGDESIGN;UID=sa;PWD="
.Open()
End With
With cnLean2
.ConnectionString = "DSN=SPRINGDESIGN;UID=sa;PWD="
.Open()
End With
'open connection to syspro
With cnSyspro
.ConnectionString = "DSN=COMPANYM;UID=sa;pwd="
.CommandTimeout = 300
.Open()
End With
btnUpdateLean.Enabled = False
Me.Cursor = Cursors.WaitCursor
**
Bunch of code to set up commands and select statements
**
'Initial command that will update the pull records as they are being processed.
With cmdUpdatePull
.let_ActiveConnection(cnLean)
.CommandType = ADODB.CommandTypeEnum.adCmdStoredProc
.CommandText = "sp_MX_Daily_UpdateMRPData"
.CommandTimeout = 300
.Parameters.Refresh()
End With
**
More Code
**
Try
rsPullItems.CursorLocation = ADODB.CursorLocationEnum.adUseClient
'Get all the pull items.
'rsPullItems = cmdPullItems.Execute
rsPullItems.Open(mPullSQL, cnLean2)
rsPullItems.ActiveConnection = Nothing
Catch ex As Exception
mtest = "Exception Message: " & ex.Message & vbCrLf & "SQLStatement: " & cmdPullItems.CommandText
LogError("", mtest)
rsPullItems = Nothing
End Try
Try
'Initialize debugging and transaction files.
mFileNum = FreeFile()
FileOpen(mFileNum, "MXtestdebug.txt", OpenMode.Output, OpenAccess.Default, OpenShare.Shared)
PrintLine(mFileNum, "Start " + Format(Now, "hh:mms"))
mTrnFileNum = FreeFile()
FileOpen(mTrnFileNum, "MXTrndebug.txt", OpenMode.Output, OpenAccess.Default, OpenShare.Shared)
Catch ex As Exception
End Try
mCurRecordCount = 0
'Start working.
If IsNothing(rsPullItems) = False Then
Do While rsPullItems.EOF = False
mCurRecordCount += 1
'Initialize parameter values
cmdUpdatePull.Parameters("@stock_code").Value = mStockCode
cmdUpdatePull.Parameters("@MINIMUM_QTY").Value = 0
cmdUpdatePull.Parameters("@MAXIMUM_QTY").Value = 0
cmdUpdatePull.Parameters("@SAFETYSTOCKQTY").Value = 0
cmdUpdatePull.Parameters("@ON_HAND").Value = 0
cmdUpdatePull.Parameters("@ON_ORDER").Value = 0
cmdUpdatePull.Parameters("@BACKORDER_QTY").Value = 0
cmdUpdatePull.Parameters("@MAKE_QTY").Value = 0
cmdUpdatePull.Parameters("@RELEASE_QTY").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKORDER").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_LATE1").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_LATE2").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_LATE3").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_LATE4").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG1").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG2").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG3").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG4").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG5").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG6").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG7").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG8").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG9").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG10").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG11").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG12").Value = 0.0
'Initial flags used to determine if the individual sales order dates are
'before or after the request date.
cmdUpdatePull.Parameters("@LEAN_BACKORDER_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_LATE1_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_LATE2_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_LATE3_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_LATE4_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG1_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG2_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG3_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG4_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG5_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG6_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG7_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG8_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG9_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG10_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG11_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG12_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEANMFG_STOCKSTATUS").Value = 0
**
**
Try
'Get warehouse totals
rsWHTotals = New ADODB.Recordset
rsWHTotals = cmdWHTotals.Execute
Catch ex As Exception
mtest = "Exception Message: " & ex.Message & vbCrLf & "SQLStatement: " & cmdWHTotals.CommandText
LogError(mStockCode, mtest)
rsWHTotals = Nothing
End Try
**
**
If IsNothing(rsWHTotals) = False Then
If rsWHTotals.EOF = False Then 'If there are values in the warehouse query.
**
BUNCH MORE CODE
**
cmdUpdatePull.Parameters("@stock_code").Value = mStockCode
cmdUpdatePull.Parameters("@MINIMUM_QTY").Value = mMinimumQty
cmdUpdatePull.Parameters("@MAXIMUM_QTY").Value = mMaximumqty
cmdUpdatePull.Parameters("@SAFETYSTOCKQTY").Value = mSafetyStockQty
cmdUpdatePull.Parameters("@ON_HAND").Value = mOnHand
cmdUpdatePull.Parameters("@ON_ORDER").Value = mOnOrder
**
cmdUpdatePull.Parameters("@BACKORDER_QTY").Value = mbackorderqty
mmakeqty = (mMaximumqty - mOnHand)
If mmakeqty > 0 Then
cmdUpdatePull.Parameters("@MAKE_QTY").Value = mmakeqty
Else
cmdUpdatePull.Parameters("@MAKE_QTY").Value = 0
End If
'init varables.
cmdUpdatePull.Parameters("@LEAN_BACKORDER").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_LATE1").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_LATE2").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_LATE3").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_LATE4").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG1").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG2").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG3").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG4").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG5").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG6").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG7").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG8").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG9").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG10").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG11").Value = 0.0
cmdUpdatePull.Parameters("@LEAN_BACKLOG12").Value = 0.0
mBackOrder = 0.0
mBackLate1 = 0.0
mBackLate2 = 0.0
mBackLate3 = 0.0
mBackLate4 = 0.0
mBackLog1 = 0.0
mBackLog2 = 0.0
mBackLog3 = 0.0
mBackLog4 = 0.0
mBackLog5 = 0.0
mBackLog6 = 0.0
mBackLog7 = 0.0
mBackLog8 = 0.0
mBackLog9 = 0.0
mBackLog10 = 0.0
mBackLog11 = 0.0
mBackLog12 = 0.0
'Initiale Binary flags that represent if the ship date is
'before or after the request date.
cmdUpdatePull.Parameters("@LEAN_BACKORDER_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_LATE1_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_LATE2_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_LATE3_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_LATE4_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG1_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG2_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG3_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG4_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG5_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG6_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG7_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG8_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG9_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG10_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG11_BFLAG").Value = 0
cmdUpdatePull.Parameters("@LEAN_BACKLOG12_BFLAG").Value = 0
mBackOrder = 0.0
mBackLate1 = 0.0
mBackLate2 = 0.0
mBackLate3 = 0.0
mBackLate4 = 0.0
mBackLog1 = 0.0
mBackLog2 = 0.0
mBackLog3 = 0.0
mBackLog4 = 0.0
mBackLog5 = 0.0
mBackLog6 = 0.0
mBackLog7 = 0.0
mBackLog8 = 0.0
mBackLog9 = 0.0
mBackLog10 = 0.0
mBackLog11 = 0.0
mBackLog12 = 0.0
mLEAN_BACKORDER_BFLAG = 0
mLEAN_LATE1_BFLAG = 0
mLEAN_LATE2_BFLAG = 0
mLEAN_LATE3_BFLAG = 0
mLEAN_LATE4_BFLAG = 0
mLEAN_BACKLOG1_BFLAG = 0
mLEAN_BACKLOG2_BFLAG = 0
mLEAN_BACKLOG3_BFLAG = 0
mLEAN_BACKLOG4_BFLAG = 0
mLEAN_BACKLOG5_BFLAG = 0
mLEAN_BACKLOG6_BFLAG = 0
mLEAN_BACKLOG7_BFLAG = 0
mLEAN_BACKLOG8_BFLAG = 0
mLEAN_BACKLOG9_BFLAG = 0
mLEAN_BACKLOG10_BFLAG = 0
mLEAN_BACKLOG11_BFLAG = 0
mLEAN_BACKLOG12_BFLAG = 0
mBFlagValue = 0
**
more Code
**
Try
rsSalesOrders = New ADODB.Recordset
rsSalesOrders.Open(mSalesSQL, cnSyspro)
Catch ex As Exception
mtest = "Exception Message: " & ex.Message & vbCrLf & "SQLStatement: " & mSalesSQL
LogError(mStockCode, mtest)
rsSalesOrders = Nothing
End Try
If IsNothing(rsSalesOrders) = False Then
Do While rsSalesOrders.EOF = False
**
More Code
**
Select Case mcol
Case Is <= -5
cmdUpdatePull.Parameters("@LEAN_BACKORDER").Value = cmdUpdatePull.Parameters("@LEAN_BACKORDER").Value + mNewVal
'Check to see if the bit is marked. If not then mark it.
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKORDER_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKORDER_BFLAG").Value = cmdUpdatePull.Parameters("@LEAN_BACKORDER_BFLAG").Value + mBFlagValue
End If
mBackOrder = mBackOrder + mNewVal
Case Is = -4
cmdUpdatePull.Parameters("@LEAN_LATE4").Value = cmdUpdatePull.Parameters("@LEAN_LATE4").Value + mNewVal
'Check to see if the bit is marked. If not then mark it.
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_LATE4_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_LATE4_BFLAG").Value = cmdUpdatePull.Parameters("@LEAN_LATE4_BFLAG").Value + mBFlagValue
End If
mBackLate4 = mBackLate4 + mNewVal
Case Is = -3
cmdUpdatePull.Parameters("@LEAN_LATE3").Value = cmdUpdatePull.Parameters("@LEAN_LATE3").Value + mNewVal
'Check to see if the bit is marked. If not then mark it.
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_LATE3_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_LATE3_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_LATE3_BFLAG").Value + mBFlagValue)
End If
mBackLate3 = mBackLate3 + mNewVal
Case Is = -2
cmdUpdatePull.Parameters("@LEAN_LATE2").Value = cmdUpdatePull.Parameters("@LEAN_LATE2").Value + mNewVal
'Check to see if the bit is marked. If not then mark it.
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_LATE2_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_LATE2_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_LATE2_BFLAG").Value + mBFlagValue)
End If
mBackLate2 = mBackLate2 + mNewVal
Case -1 To 0
cmdUpdatePull.Parameters("@LEAN_LATE1").Value = cmdUpdatePull.Parameters("@LEAN_LATE1").Value + mNewVal
'Check to see if the bit is marked. If not then mark it.
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_LATE1_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_LATE1_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_LATE1_BFLAG").Value + mBFlagValue)
End If
mBackLate1 = mBackLate1 + mNewVal
Case Is = 1
cmdUpdatePull.Parameters("@LEAN_BACKLOG1").Value = cmdUpdatePull.Parameters("@LEAN_BACKLOG1").Value + mNewVal
'Check to see if the bit is marked. If not then mark it.
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKLOG1_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKLOG1_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_BACKLOG1_BFLAG").Value + mBFlagValue)
End If
mBackLog1 = mBackLog1 + mNewVal
Case Is = 2
cmdUpdatePull.Parameters("@LEAN_BACKLOG2").Value = cmdUpdatePull.Parameters("@LEAN_BACKLOG2").Value + mNewVal
'Check to see if the bit is marked. If not then mark it.
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKLOG2_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKLOG2_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_BACKLOG2_BFLAG").Value + mBFlagValue)
End If
mBackLog2 = mBackLog2 + mNewVal
Case Is = 3
cmdUpdatePull.Parameters("@LEAN_BACKLOG3").Value = cmdUpdatePull.Parameters("@LEAN_BACKLOG3").Value + mNewVal
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKLOG3_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKLOG3_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_BACKLOG3_BFLAG").Value + mBFlagValue)
End If
mBackLog3 = mBackLog3 + mNewVal
Case Is = 4
cmdUpdatePull.Parameters("@LEAN_BACKLOG4").Value = cmdUpdatePull.Parameters("@LEAN_BACKLOG4").Value + mNewVal
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKLOG4_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKLOG4_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_BACKLOG4_BFLAG").Value + mBFlagValue)
End If
mBackLog4 = mBackLog4 + mNewVal
Case Is = 5
cmdUpdatePull.Parameters("@LEAN_BACKLOG5").Value = cmdUpdatePull.Parameters("@LEAN_BACKLOG5").Value + mNewVal
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKLOG5_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKLOG5_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_BACKLOG5_BFLAG").Value + mBFlagValue)
End If
mBackLog5 = mBackLog5 + mNewVal
Case Is = 6
cmdUpdatePull.Parameters("@LEAN_BACKLOG6").Value = cmdUpdatePull.Parameters("@LEAN_BACKLOG6").Value + mNewVal
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKLOG6_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKLOG6_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_BACKLOG6_BFLAG").Value + mBFlagValue)
End If
mBackLog6 = mBackLog6 + mNewVal
Case Is = 7
cmdUpdatePull.Parameters("@LEAN_BACKLOG7").Value = cmdUpdatePull.Parameters("@LEAN_BACKLOG7").Value + mNewVal
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKLOG7_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKLOG7_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_BACKLOG7_BFLAG").Value + mBFlagValue)
End If
mBackLog7 = mBackLog7 + mNewVal
Case Is = 8
cmdUpdatePull.Parameters("@LEAN_BACKLOG8").Value = cmdUpdatePull.Parameters("@LEAN_BACKLOG8").Value + mNewVal
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKLOG8_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKLOG8_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_BACKLOG8_BFLAG").Value + mBFlagValue)
End If
mBackLog8 = mBackLog8 + mNewVal
Case Is = 9
cmdUpdatePull.Parameters("@LEAN_BACKLOG9").Value = cmdUpdatePull.Parameters("@LEAN_BACKLOG9").Value + mNewVal
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKLOG9_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKLOG9_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_BACKLOG9_BFLAG").Value + mBFlagValue)
End If
mBackLog9 = mBackLog9 + mNewVal
Case Is = 10
cmdUpdatePull.Parameters("@LEAN_BACKLOG10").Value = cmdUpdatePull.Parameters("@LEAN_BACKLOG10").Value + mNewVal
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKLOG10_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKLOG10_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_BACKLOG10_BFLAG").Value + mBFlagValue)
End If
mBackLog10 = mBackLog10 + mNewVal
Case Is = 11
cmdUpdatePull.Parameters("@LEAN_BACKLOG11").Value = cmdUpdatePull.Parameters("@LEAN_BACKLOG11").Value + mNewVal
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKLOG11_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKLOG11_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_BACKLOG11_BFLAG").Value + mBFlagValue)
End If
mBackLog11 = mBackLog11 + mNewVal
Case Is = 12
cmdUpdatePull.Parameters("@LEAN_BACKLOG12").Value = cmdUpdatePull.Parameters("@LEAN_BACKLOG12").Value + mNewVal
If mBFlagValue <> (cmdUpdatePull.Parameters("@LEAN_BACKLOG12_BFLAG").Value And mBFlagValue) Then
cmdUpdatePull.Parameters("@LEAN_BACKLOG12_BFLAG").Value = (cmdUpdatePull.Parameters("@LEAN_BACKLOG12_BFLAG").Value + mBFlagValue)
End If
mBackLog12 = mBackLog12 + mNewVal
End Select
End If
rsSalesOrders.MoveNext()
Loop
rsSalesOrders.Close()
rsSalesOrders = Nothing
End If
**
More Code
**
cmdUpdatePull.Parameters("@LEANMFG_STOCKSTATUS").Value = mStockStatus
**
More Code
**
Else
cmdUpdatePull.Parameters("@stock_code").Value = mStockCode
End If
rsWHTotals.Close()
rsWHTotals = Nothing
Else 'rswhtotal is nothing
cmdUpdatePull.Parameters("@stock_code").Value = mStockCode
End If 'rswhtotal is nothing
'Update the record in DesignLean
Try
*********
This is where it fails
*********
cmdUpdatePull.Execute()
Catch ex As Exception
mtest = "ERROR executing cmdupdatepull" & vbCrLf & "Exception Message: " & ex.Message & vbCrLf
LogError(mStockCode, mtest)
PrintLine(mTrnFileNum, mtest)
End Try
PrintLine(mTrnFileNum, "Finished to update cmdUpdatePull")
'Move to next record
rsPullItems.MoveNext()
PrintLine(mTrnFileNum, "Moving to next rsPullItems")
Loop
rsPullItems.Close()
rsPullItems = Nothing
cmdUpdatePull = Nothing
rsSalesOrders = Nothing
rsWipMaster = Nothing
End If
PrintLine(mTrnFileNum, "End of Pull Items LOOP")
FileClose(mTrnFileNum)
PrintLine(mFileNum, "ending" + Format(Now, "hh:mms"))
FileClose(mFileNum)
ProgressBar1.Value = mCountOfRecords + 100
btnUpdateLean.Enabled = True
Me.Cursor = Cursors.Default
MsgBox("done", MsgBoxStyle.OKOnly, "MXLean Calculation Status")
End
Exit Sub
View 3 Replies
View Related
Jul 5, 2006
When I try to install MsSQL Server 2005 Develop Edition do I get the error:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the other end of the pipe.
I have trying to look at other posts on this forum and elsewhere, but cant find any solution that works for me - mainly cuz all solutions is after the installing.
Before trying to install MsSQL Server 2005 Dev did I install VS.Net 2005 Pro. First did the Native Client make troubles, but got it to work with reinstalling it, but now does the SQL setup stop on every try with the error above.
I have tried looking if the MSSQLServer is running when it tries to connect during install, and everything says it is running (Services, Net start, Taskman.).
I dont run any special setup on my system - it is a normal Windows XP Pro SP2 with all updates. I just need the SQL server installed so I can develop locally without access to out main SQL server.
I have been using MsSQL 2000 before and never had any problems, but the 2005 keep on bugging me.
The only solution I havent tried is to reinstall Windows itself, but I will pref. not to do so.
And to be honest, then have I no idea what a "pipe" is - I am used to develop webapplications and not so much on server maintaince/troubleshooting.
Need some more information? Then just ask.
View 1 Replies
View Related
Oct 13, 2006
Hey guys. I am creating an app that uses the RMO Merge Replication objects.
So far it can subscribe and unsubscribe just fine but when it comes to the syncing process it gets a little weird, here's why.
- If I run the SQL GUI Sync tool, it sinks fine. So that setup is working.
- When I run the C# App it blows up witht the error: "Process cannot connect to Distributor"
- Here's the weird part: When I set a breakpoint on my custom method SyncData (this method sets up the connection info and properties and then calls Syncronize( ) ) and step through the code when it gets to Syncronize( ) it runs perfectly fine, no execeptions.
I thought that maybe the Syncronize( ) method was being called too fast before the connection properties got to fully setup and connect, so I added a Thread.Sleep( ) method for 10 secs after each connection call and just before calling Syncronize( ). It still didn't work. My class is a static class by design, however, I changed it into an ordinary class and then placed the connection info in the constructor hoping it would do it's connection when the object gets initialized, that didn't work either.
If someone could please help me out with this I would greatly appreciate it.
Here's my code:
using System;using System.Collections.Generic;using System.Text;using Microsoft.SqlServer.Replication;using Microsoft.SqlServer.Replication.BusinessLogicSupport;using Microsoft.SqlServer.Management.Common;using System.Windows.Forms;using System.Threading;namespace Emds.Briefcase.BriefcaseSubscriber.BLL{ public class SyncDataClass { #region Members private static string m_statusMessage = string.Empty; private static byte m_percentComplete; public delegate void StatusTextChangeHandler(int percent, string status); public static event StatusTextChangeHandler OnStatusChange; #endregion Members #region Methods public static string SyncData() { //Delay(); // Define the server, publication, and database names. string publicationName = "Chart"; string publisherName = @"JSMITHSQL2005"; string subscriberName = @"JDOESQL2005"; string subscriptionDbName = "DataSubscriber"; string publicationDbName = "DataPublisher"; string message = string.Empty; // Create a connection to the Subscriber. ServerConnection conn = new ServerConnection(subscriberName); MergePullSubscription subscription; try { // Connect to the Subscriber. conn.Connect(); // Delay(); // Define the pull subscription. subscription = new MergePullSubscription(); subscription.ConnectionContext = conn; //Delay(); subscription.DistributorSecurity.WindowsAuthentication = false; subscription.DistributorSecurity.SqlStandardLogin = "sa"; subscription.DistributorSecurity.SqlStandardPassword = "russell"; // Delay(); subscription.PublisherName = publisherName; subscription.PublicationDBName = publicationDbName; subscription.PublicationName = publicationName; subscription.PublisherSecurity.SecurityMode = ReplicationSecurityMode.SqlStandard; subscription.PublisherSecurity.SqlStandardLogin = "sa"; subscription.PublisherSecurity.SqlStandardPassword = "russell"; // Delay(); subscription.DatabaseName = subscriptionDbName; subscription.SubscriberSecurity.WindowsAuthentication = false; subscription.SubscriberSecurity.SqlStandardLogin = "sa"; subscription.SubscriberSecurity.SqlStandardPassword = "russell"; // Delay(); // If the pull subscription exists, then start the synchronization. if (subscription.LoadProperties()) { // Check that we have enough metadata to start the agent. if (subscription.PublisherSecurity != null || subscription.DistributorSecurity != null) { // Synchronously start the Merge Agent for the subscription. subscription.SynchronizationAgent.Status += new AgentCore.StatusEventHandler(SynchronizationAgent_Status); // Delay(); subscription.SynchronizationAgent.Synchronize(); message = "Data Syncronization is a success!"; } else { throw new ApplicationException("There is insufficent metadata to " + "synchronize the subscription. Recreate the subscription with " + "the agent job or supply the required agent properties at run time."); } } else { // Do something here if the pull subscription does not exist. throw new ApplicationException(String.Format( "A subscription to '{0}' does not exist on {1}", publicationName, subscriberName)); } } catch (Exception ex) { // Implement appropriate error handling here. throw new ApplicationException("The subscription could not be " + "synchronized. Verify that the subscription has " + "been defined correctly.", ex); } finally { conn.Disconnect(); } return message; } static void SynchronizationAgent_Status(object sender, StatusEventArgs e) { m_percentComplete = e.PercentCompleted; m_statusMessage = e.Message; //Fire custom event if (OnStatusChange != null) { OnStatusChange(m_percentComplete, m_statusMessage); } } #endregion Methods }}
View 7 Replies
View Related
May 6, 2007
Hi, all,
I installed sql server 2005 express on a server with window server 2003 SP1 and tried to connect it from a remote computer with vista installed.
I have already enabled named pipe and tcp/ip protocol for instance SQLEXPRESS on the server, and started sql server browser as well. Of course, I also enabled local and remote connection using tcp/ip and named pipe by sql server surface area configuration tool.
In this senario, I can connect to server locally or remotely by tcp/ip and connect to server locally by named pipe(c>sqlcmd -S \192.168.1.100pipeMSSQL$SQLEXPRESSsqlquery -U * -P *), but I can not connect to server remotely using same command line.
According to some article from MSDN, it might be caused by firewall, but I already disabled my firewall. Moreover, I used tools like makepipe.exe and readpipe.exe, they didn't work too. Why the 2 computers can't create connection using named pipe protocol.
Thanks.
Johonson Chan
View 5 Replies
View Related
May 13, 2015
I have a problem with a PIPE "|" delimited flat file. I have a column "Description" in which we get a string in which we have PIPE "|" as data. How we can skip this and load it as a data into the column Description.
View 7 Replies
View Related
Feb 5, 2003
Hi guys,
Running a clustered webserver, windows 2000, IIS v5, and a sql server, v2000. Using OLE Db as connection, running stored procedures, no sql created on the fly. The website handles about 5000 transaction a day.
Every now and again, we get a problem whereby an error 41 - Broken Pipe is reported. I can't find any info on this error on Technet, MSDN, etc. Google returns info, but only really affecting solaris, unix, linux, etc.
Anyone ever come across this error before? or know what might cause it? and possible resolutions?
View 2 Replies
View Related
Dec 3, 2007
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
View 13 Replies
View Related
Mar 11, 2008
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
View 1 Replies
View Related
Jan 30, 2007
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
View 1 Replies
View Related
Mar 20, 2008
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
View 9 Replies
View Related
Aug 20, 2014
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
View 3 Replies
View Related
Aug 21, 2007
Hello, everyone!
I'm currently having an issue with a linked server. Here's the surrounding information:
A) I have a clustered SQL Server 2005 Instance (A) and a SQL Server 2000 instance (B).
B) There is a linked server on A to B. When I set it up, I did run the fix to ensure A could talk to B (There was an issue with communication between 2005 and 2000 servers). It has been there since I installed A, and has worked fine.. Until last week.
C) This linked server uses static credentials to connect to B.
D) Named Pipes are enabled on both servers to listen to both connections on both A and B in cliconfg. So A has a named pipe listening for B, and B has a named pipe listening for A.
E) A has a view that looks at a table on B - It's a table view, very simple, just pulls in all the data from the table on B.
So, I go to do a select statement from the view, connected as a user other then 'sa'. I then get the error:
Named Pipes Provider: Could not open a connection to SQL Server Linked Server
Error Source: ncli Client (Paraphrasing, didn't copy that down, but it was the ODBC connector)
Well, that's odd. It's been working fine for months now..
I then go and connect as sa on A to query B. It works! Mind you, absolutely NO QUERY from A to B will run again until I run SOME kind of query has been run as sa on A.
Mind you, this is not a credential issue. Every user who connects to the linked server to B uses a stored credential that is DBO to the database on B. The same User Name and Password exists on both A and B.
Also of note, I check the activity monitor. There's a process that is "dormant" every time I run a query against the view. The details of this connection are:
sp_reset_connection;1
My question is, why is it resetting the connection on B when being queried from A? Why is it "all of a sudden" a problem? Are there any changes that coudl ahve been made that would cause this?
Any help with this confusing issue would be appreciated.
Thanks!
View 1 Replies
View Related
May 25, 2008
I have a sql server 2005 database that I have set as the publisher and an sql express database that I have set as the subscriber.
I set it that the 2005 db should push to the sql express db.
when i look at the replication monitor I get an error
The process could not connect to subscriber name/sqlexpress
what can I do to get this working?
I really am trying to just replicate 1 table every minute from the sql 2005 db to the sql express
Please advise?
View 9 Replies
View Related
Sep 1, 2006
hi friends
i am creating the Merge Replication between two server(both SQLServer-2005, on XP).
Server names are as
1. HB5B
2. VSNET1
i) On server HB5B, i had created the Publication with name 'hb_pub'.
(publisher & Distributer on HB5B server)
ii) On server VSNET1, i had created the Pull Subscription, for the publication name hb_pub( form the server HB5B), this starts fine.
iii) When i went to Viwe Synchroniztion status, it says
The process could not connect to Distributor 'HB5B'
iv) i too check the Distributor properties, its seems fine for me.
v) On server VSNET1, if creats the Push Subscription, for the publication name hb_pub( form the server HB5B), this starts fine.
vi) When i went to Viwe Synchroniztion status, it says
The server 'VSNET1' is not a Subscriber. (.Net SqlClient Data Provider)
vii) if i try again the Start button on the Viwe Synchroniztion status, it says the job is already running (with job name), Change the database context to 'HBmyDB' ( this is my database name).
the check list i made is
i) I had log on as service(SQL Server Agent (MSSQLSERVER) & SQL Server (MSSQLSERVER) ) as Administrator at server VSNET1(i mean it had the administrative right) & restarted them.
ii) I do have the administrative rights on the both of the machines.
iii) both Server have same 'sa' passwords.
please help me
any solution, hint or idea.
Regards
Thanks
Gurpreet S. Gill
View 16 Replies
View Related
Nov 28, 2006
I have a small problem, I get this following error when trying to start the snapshot agent "The process could not connect to the distributor 'distributor name'. NOTE: The step was retried the requested number of times [10] without succeeding. The step failed.
I thought it was related to users or rights but i am using the same user than in previous replication with the server and the rights haven't been altered. I don't know if someone has some knowledge of what to do or a workaround solution, any help would be greatly appreciated.
Thank you in advance.
View 6 Replies
View Related
Apr 14, 2007
After I installed the various service packs via Windows Update, my WindowsForms application can no longer connect to the server.
The error message is:
provider: Named Pipe Provider, error: 40 - Could not open connection to SQL server.
However, the Reporting Services work just fine.
Please help.
View 1 Replies
View Related
Apr 3, 2007
This has worked fine for weeks, and months.
I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.
Today, actually half way through today, I restarted my computer after installing Photoshop Updates.
Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).
Whenever I run an web app that connects to it I get this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?
--Edit
I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.
View 1 Replies
View Related
Feb 8, 2006
Precedents
Windows 2000 Server
1 SERVERNAME
SQL Server 2000 - 8.00.818 (Intel X86) May 31 2003 16:08:15
Enterprise Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
1 SERVERNAMEINSTANCE
SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38
Desktop Engine on Windows NT 5.0 (Build 2195: Service Pack 4)
IIS 5.0
SQL Server CE 2.0 (sp3a)
Merge replication previously working fine.
The problem
After migrating MSDE from sp3a to sp4 (in order to fix CE replication bug) I can't sync to MSDE.
I got the following error code: [29045]->[Initializing SQL Server Reconciler has failed.] so I've looked into SQL Server CE log file and I've found the following error message:
2006/02/07 19:44:23 Thread=9A8 RSCB=4 Command=SYNC Hr=00000000
The process could not connect to Distributor 'Distributor-name'. 20084
2006/02/07 19:44:23 Thread=9A8 RSCB=4 Command=SYNC Hr=00000000
Data source name not found and no default driver specified
I've already tried without success
Uninstalling all SQL Server 2000 (EE) instances (except for the "no instance")
Unistalling and re-install MSDE (sp4)
Re-registering sscerp20.dll.
Rebooting server.
Restarting IIS.
Any ideas?
Sebastian
View 3 Replies
View Related
Jul 14, 2007
Microsoft SQL Server 2005 Setup
-------------------------------------------------
The setup failed to get IID_IIMSAdminBase object. The error code is -2147467262.
Hi there,
I have checked every possible site for this error but unable to find any solution. I received the above alert message during the installation of SQL2k5, Reporting Services. I am using window xp with sp2.
When click OK to alert box then it rollback all installed components of Reporting Services.
Please help.
Cheers,
Zafar.
View 1 Replies
View Related
Jul 31, 2007
Hi everybody,
I'm trying to backup a database of 330 GB more or less from my server to an external hard disk connected by optical fiber and I'm receiving the next error:
[SQLSTATE 01000] (Message 3211) Write on "H:sqlbackuppm_import" failed: 33(The process cannot access the file because another process has locked a portion of the file.) [SQLSTATE 42000] (Error 3202) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
Any idea??
Thanks!
View 7 Replies
View Related
Mar 3, 2006
I had to move my developed software onto another computer in order to demo this. The new computer has IIS installed as well as VS2005 and SQL Server 2005. When I try to execute I get this error.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
I have worked on this problem for two days now and have to demo it first thing Monday. Any help would be appreciated.
View 9 Replies
View Related
Mar 24, 2008
guys,
I have a stored procedure which gets called by ASPX page and it inserts, updates data into different tables. originally, I had a issue that if error occured, it would not rollback all the data so i used transaction around it. now, once in a while I am getting this error "System.Data.SqlClient.SqlException: Transaction (Process ID 181) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction".
I don't know how this error occurs and how do I prevent it. please help.
transaction is as follow.
BEGIN TRY
BEGIN TRANSACTION
// t-sql codes to insert update multiple tables
COMMITEND TRY
BEGIN CATCH
if (@@TRANCOUNT > 0) --error
ROLLBACK
declare @errSeverity intselect
@errMsg = ERROR_MESSAGE(),
@errSeverity = ERROR_SEVERITY()
RAISERROR(@errMsg, @errSeverity, 1)
END CATCH
View 7 Replies
View Related
Jun 27, 2014
I have a simple update statement that will update one field, and that field is part of the primary key. During the update process, some of the rows will cause duplicate error. Is there a way to update the table and suppress the error? What I am looking for is a way to update the records that it can and ignore those it cannot. Right now, the entire process is terminated if duplicate error occurs.
View 2 Replies
View Related
Mar 10, 2008
Hi
I am having trouble running a package in SQL Agent. The step involves zipping up a number of files using SQL Agent. I know in the error message it states "Access is denied" but I can run the package manually in BIS. Also I have applied a SQL proxy to the step using my own credentials which have rights to the file location, but still no luck.
I get the following error:
Error: 2008-03-10 09:04:02.04 Code: 0xC002F304 Source: Call ZipFiles Batch Execute Process Task Description: An error occurred with the following error message: "Access is denied". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 09:04:00 Finished: 09:04:02 Elapsed: 1.219 seconds. The package execution failed. The step failed.,00:00:02,0,0,,,,0
Does anyone know what the problem could be?
Thanks
View 19 Replies
View Related
May 1, 2008
When i am trying to run a report model. I am encountered with the following error.
Can anybody help me out in resolving this error.
Error: the server could not process the data
thanks
View 1 Replies
View Related
May 23, 2007
While MOM processes are running at some point, a process goes into deadlock and uses up all existing CPUs.
Sysprocesses shows this it opened up 4 threads and program name is Microsoft® Reliability Analysis Service.
Profiler doesn't show which command it was trying to execute, but last notable command which has started was MRAS_pcLoad EXECUTE @i_Return_Code = sp_getapplock @Resource = N'MOM.Datawarehousing.DTSPackageGenerator.exe', @LockMode = N'Exclusive', @LockOwner = N'Session', @LockTimeout =
Can you please help us, what could be the problem. It has been running fine till couple of days back.
--Prabhu
View 5 Replies
View Related
Dec 15, 2006
I've got a dilemma here. I'm currently reading records into EasyListBox (ELB) dropdownlist. The criteria in the dropdownlist is based on the select from another ELB dropdownlist. The problem is that the data contains rows with pipes that serve as separters. For example, one of the options that comes back now might be 123 | 456 | 789. I need to be able to make each of them its own row in the dropdownlist. Can anyone advice? Most records don't have any pipes and come throught fine, but some dont.
My code below:
Dim sAT As String = Replace(elbAttribute.SelectedValue, "'", "''")
Dim adapter As New SQLDataAdapter("Select Feature_Type As Attribute_Name, FEATURE_TEXT_VALUE as Attribute_Value, (select distinct FILTER_FAMILY_FEATURE_EXCLUDED.FEATURE_TYPE_ID from FILTER_PROFILES, FILTER_FAMILY_FEATURE_EXCLUDED, FAMILY_ALLOWED_FEATURE_TYPES, SHARED_FEATURE_TYPES, SHARED_FEATURE_VALUES where FILTER_PROFILES.FILTER_PROFILE_NAME = 'MAQ' And FILTER_PROFILES.FILTER_PROFILE_ID = FILTER_FAMILY_FEATURE_EXCLUDED.FILTER_PROFILE_ID And FAMILY_ALLOWED_FEATURE_TYPES.FAMILY_ID = FILTER_FAMILY_FEATURE_EXCLUDED.FAMILY_ID And FILTER_FAMILY_FEATURE_EXCLUDED.FEATURE_TYPE_ID = SHARED_FEATURE_TYPES.FEATURE_TYPE_ID And (SHARED_FEATURE_TYPES.Feature_Type_ID = SHARED_FEATURE_VALUES.Feature_Type_ID And left(FEATURE_TYPE, 4) <> 'CPLV' And Feature_Type = '" & sAT & "')) As ExclusionFlag From SHARED_FEATURE_TYPES, SHARED_FEATURE_VALUES, PRODUCT_FEATURE_VALUES Where PRODUCT_FEATURE_VALUES.FEATURE_VALUE_ID = SHARED_FEATURE_VALUES.Feature_Value_ID And SHARED_FEATURE_TYPES.Feature_Type_ID = SHARED_FEATURE_VALUES.Feature_Type_ID And left(FEATURE_TYPE, 4) <> 'CPLV' And Feature_Type = '" & sAT & "' UNION Select distinct Column_Name As Attribute_Name, SMALL_TEXT_VALUE As Attribute_Value, (select FILTER_ATTRIBUTES_EXCLUDED.EXT_ATT_ID from FILTER_PROFILES, FILTER_ATTRIBUTES_EXCLUDED where FILTER_PROFILES.FILTER_PROFILE_NAME = 'MAQ' And FILTER_PROFILES.FILTER_PROFILE_ID = FILTER_ATTRIBUTES_EXCLUDED.FILTER_PROFILE_ID And FILTER_ATTRIBUTES_EXCLUDED.EXT_ATT_ID = EXTENDED_ATTRIBUTES.EXT_ATT_ID) As ExclusionFlag From EXTENDED_ATTRIBUTE_VALUES, EXTENDED_ATTRIBUTES, PRODUCTS Where PRODUCTS.PRODUCT_ID = EXTENDED_ATTRIBUTE_VALUES.PRODUCT_ID And not SMALL_TEXT_VALUE is null And EXTENDED_ATTRIBUTE_VALUES.EXT_ATT_ID > 1499 And EXTENDED_ATTRIBUTE_VALUES.EXT_ATT_ID = EXTENDED_ATTRIBUTES.EXT_ATT_ID And Column_Name = '" & sAT & "'", myConnection) Dim dt As New DataTable() adapter.Fill(dt) elbValue.DataSource = dt elbValue.DataBind()
View 12 Replies
View Related
May 24, 2000
My group has recently begun ramping up #of users from 5-10 to 50 concurrent. I'm currently using a 10Mb/s Ethernet but am not sure if there is a fiber
or multiplexing solution that I could use to increase output. Basically, we're looking at up to 50 heavy duty data pulls (50MB+) at any one time.
Thanx,
Joe
View 1 Replies
View Related
