Where can I find Northwind OleDb Native Sample Application?
KB 909751 states to install VS 2005 with: "Smart Device Programmability install option"
When installing VS 2005 I do not get the opportunity to specify this option..
What am I missing?
Thanks in Advance..
JEK
For both OLEDB destiantions (and hopefully for the forthcoming ADO.NET destination adapter) it would be useful to have the following two output columns: NativeErrorCode and NativeErrorMessage.
For SQL Server, this would allow you distiguish between multiple errors which all roll up to the SSIS error "the value violated the integrity constraints of the column", which is way too generic for proper decision making (via conditional split).
For example, like SQL Server replication, you should be able to ignore duplicate key errors (error number 2627) indicating the record existed, but error out on nullability constraint errors (number 515) in which the record could not be inserted. If you had a native error code, you could make this decision, while the SSIS error for two different native errors is precisely the same.
There is a known and accepted race condition between a lookup transform and subsequent OLEDB dest insert attempt (assuming a non-transacted container and a common component target table), which is why the 2627 can be safely ignored in certain instances, while a 515 should not be.
Hi,
I experienced this problems on both Windows Mobile 2003 SE and Windows Mobile 5.0.
Its native development (c++, oledb, atl and mfc).
It's quite simple to reproduce...
1. open a database
2. open a rowset on table A (whatever, valid of course and with both IOpenRowset and ICommandText), read datas and close rowset
3. power off
4. power on
5. try step 2 with another table (failed on openrowset with error 0x80004005) or try table A (sometimes working because of cached memory, sometims failed on Read Datas).
6. being stuck ;-)
Our work-around was, in case we loose our connection (identified by error 0x80004005 on openrowset), we close it and re-open database... ugly for sure, but working.
What I'm looking now is to use some kind of "detection method" like what people in .Net develoment are using "if ConnectionState.Open <> ...) for reopening my database only on demand...
Thanks in advance for any hints,
Fabien.
I am currently modifying an existing application (which uses OLE DB Consumer Templates to access a remote SQL db) to utilize SQL Native Client instead. Does anyone have any experience making this change?
Am I correct in my assumption that all I have to do is:
change my included headers from 'sqloledb.h' to 'sqlncli.h'
and
change CLSID_SQLOLEDB to CLSID_SQLNCLI?
I am still including the 'atldbcli.h' header and therefore still using the OLE DB Consumer Templates.
Can I continue to use the Consumer Templates along with SQL Native Client?
The sample application provided with Access Database Synchronizer fires a "A request to send data to the computer running IIS has failed. For more information, see HRESULT." exception on my WinCE 4.2 device.
I debugged it with VS2005 to see what was going on and found that the problem resides in the line:
m_connDesktop.Pull("MSysObjects","SELECT Name FROM MSysObjects WHERE Type=1 and flags=0",accessSysConnectString,RDATrackOption.TrackingOff,"Err_MSysObjects");
It seems that connection m_connDesktop is ok but calling Pull method fails.
I've verified that SSEvAccessSync service is started when ActiveSync detects device connection and that firewall rules are correctly updated.
Also, i verified my System.mdw and i discovered that there is no "MSysObjects" table (only MSysGroupList, MSysGroupMembers, MSysUserList and MSysUserMemberships queries are there).
Do you think the problem is there?
How can i solve it without damaging System.mdw?
I cannot figure out what's the purpose of this line of code, can you help me?
i am writing a graduation thesis about clickstream datawarehouse with SQL Server , now who can give me some samlie about it? I just only want to learn it,thank you! :)
View 1 Replies View RelatedI am running a .Net application (VB.Net, .Net Framework 2.0) on a Windows CE 5.0 handheld device. I am relatively having good success with SQL CE replication, however sometimes (2 users out of 30 every 2 weeks), are freezing up in the application.
Here is what CE SQl software versions I installed:
sqlce30.dev.ENU.wce5.armv4i.CAB
sqlce30.repl.wce5.armv4i.CAB
sqlce30.wce5.armv4i.CAB
I have a trace log in my application, and here is what pops up before the hang (warm rebooting the handheld works)
NativeError: 28037
SQL Msg: A request to send data to the computer running IIS has failed. For more information, see HRESULT.
NativeError: 28600
SQL Msg: The database is currently synchronizing with the server.
I am using a Thread to syncronize (microsofts built in class), as you can see I am well aware of 28600, it just means some other thread is already syncing, so I can wait until next time to syncronize. However, my users apps are freezing just after both error codes occur. Anything in the code below causing issues??? (maybe _repl.Dispose() is freezing up my handheld, because its freezing after this line of code (see below code):
"MTM.SPUD.Utilities.Utilities.Log("[DEBUGQLThread#" + threadId + "]: End of Thread Life.")"
Public Sub AsyncSyncronize(ByRef PendingData As Boolean, ByVal Publication As String, ByVal Subscription As String, ByRef LastSyncDateTime As DateTime)
Dim _repl As New SqlCeReplication()
Try
...
savedAsyncResult = _repl.BeginSynchronize(objDelegate1, objDelegate2, objDelegate3, objDelegate4, _repl)
Catch ex As Exception
Finally
End Try
End Sub
Public Sub OnSynchronizeComplete(ByVal asyncResult As IAsyncResult)
Dim _repl As SqlCeReplication = Nothing
Dim threadId As String = ""
Try
_repl = DirectCast(asyncResult.AsyncState, SqlCeReplication)
threadId = _repl.InternetPassword
_repl.EndSynchronize(asyncResult)
dataIsPending = False
Catch exce As SqlCeException
_repl.CancelSynchronize()
MTM.SPUD.Utilities.Utilities.Log("[DEBUGQLThread#" + threadId + "]: SQLCE OnSynchronizeComplete() NativeError: " + exce.NativeError.ToString + "SQL Msg: " + exce.Message.ToString)
dataIsPending = True
If exce.NativeError.ToString = "28600" Then
MTM.SPUD.Utilities.Utilities.Log("[WARNINGQLThread#" + threadId + "]: Will try again next time")
Return
End If
Catch ex As Exception
Return
'MTM.SPUD.Utilities.Utilities.Log("App Exception: " + ex.Message)
'Throw New Exception("EndSynchronize Failed: " + ex.Message)
Finally
MTM.SPUD.Utilities.Utilities.Log("[DEBUGQLThread#" + threadId + "]: End of Thread Life.")
If _repl IsNot Nothing Then
_repl.Dispose()
_repl = Nothing
End If
End Try
End Sub
Does anyone know where to find a simple sample showing you how to use asp.net 2.0 with the login control to direct you to another aspx page using SQL 2000 as the database on a hosted server? I have been beating my head against the wall trying to figure this out and would be very appreciative if anyone knows a place out there that shows this? I can find many sites that show you how to do this with SQL 2005, but not SQL 2000. Thanks - Chris
View 4 Replies View RelatedHi
I am adapting an OLEDB-based application [ported on VC2005] to access a SQL Server 2005 Express database.
The application opens recordsets on tables and stored procedures. From this I can read records and update the database.
But how can I monitor the changes on this database made by other applications ?
Do triggers resolve the pb ?
I can't find any literature on the native mode SSRS databases.
so something similar to the MSDB sys tables [URL] Is documentation non existent?
issues with triggers in Sql Server 2014.
A few weeks ago I've done a SQL Server migration from SQL Server 2000 to SQL Server 2014.It was a bit tricky but anything worked fine.
I have some legacy VB6 (Visual Basic 6) applications written in house which worked with Databases on the old SQL server 2000.Surprisingly, these applications worked well after the upgrade to SQL Server 2014 without having to change a piece of code.
Now, some users tell me that they receive some unusual message when saving data from these legacy applications.After investing for a few hours, I discovered that triggers are not executed when those users try to save data from grids or forms in their applications.Trying to reproduce the INSERT statement in SQL Server Management Studio, the triggers run well.From the application, they don't.
These applications connect to Database Server thru OLEDB connection with the following ADO connection string :
Provider=SQLOLEDB.1;Password={password};User ID={user};Initial Catalog={db};Data Source={datasource}.the {user} is a true SQL account who have read/write/delete access in the databases.
On the web there is a lot of questions involving the same issue, but only from SSIS.I found some articles about an OLEDB connection parameter named FastLoadOptions with a value of FIRE_TRIGGERS, but nowhere how to put it in the ADO OLEDB connection string.
how to reactivate the "normal" use of triggers from an ADO OLEDB connection ?Either with some obscur parameter in the connection string or options somewhere in the SQL Server 2014.
I am trying to install SQL Server Express - (the non ADV version) and get the following error.
"An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli_x64.msi'".
I have 64 bit Vista Ultimate running on an HP dv9000.
I am using the download from the bottom of the download page for SSX where it says 64 bit version.
Prior to this I got the. "64-bit ASP.net is registered. Required 32-bit ASP.NET to install Microsoft Reporting services 2005(32-bit)." messagd during the pre-install scan. From what I gather in the posts, the reporting issue is different from my installation package problem.
I have been trying to prove a point to friends about how far you can go with SSX but am having no luck installing it. This whole process took 1 hour in XP but I've been stymied for 2 days.
I would appreciate being pointed at the right downloads for what seems to be a simple install.
I apologize if this is not the correct forum for this posting. Looking at the descriptions, it appeared to be the best choice.
I am running Windows XP Pro SP2. I have installed the SQL Native Client for
XP. However, when I try to add a new data source through ODBC Connection
Manager, SQL Native Client is not listed as an option. I have followed this procedure on three other systems with no problems. What would be causing the
SQL Native Client to not show up in the list of available ODBC data sources?
Hi
Books online mention the existence of sample code for several custom tasks, including the one mentioned in the title. But, when I try to find this code in the location mentioned it is nowhere to be found.
I have run a search on the rest of my drive and come up empty.
Can anyone tell me where to find this?
Thanks
Hi:
We have one dedicated server, and have 3 different web applications, one of them is located in www folder which is default path, my question is: how do I set different path so all 3 web applications can be accessed by different URL?
Say: www.mywebname1.com, www.mywebname2.com www.mywebname3.com , I need those three URL to find the correct files from my server.
Thanks a lot.
(the DBA in my company has just left, so I need to make these works, however, I have very limited knowledge for this, do you have any suggestion what kind of book I need to read and start with?)
jt
On the Enterprise Manager of the MS-SQL server, how do I find or see the database index in there? Both that was done by SQL query or Stored Procedure?
Thanks...
How to find a running application in SQL Server?
Hi
In SQL Server (7.0, 2000), we know HOST_NAME() in a DEFAULT definition is used to record the workstation name of computers. But I need to find the name of the application which interacts my DB from the workstations. Is it possible? Please help me
Regards
Ahmed Sahib
ibnukuraish@gmail.com
Hi all,
From the http://msdn.microsoft.com/en-us/library/bb384469.aspx (Walkthrough: Creating Stored Procedures for the Northwind Customers Table, I copied the following sql code:
--UpdateSPforNWcustomersTable.sql--
USE NORTHWIND
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'SelectCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.[SelectCustomers]
GO
CREATE PROCEDURE dbo.[SelectCustomers]
AS
SET NOCOUNT ON;
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM dbo.Customers
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'InsertCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.InsertCustomers
GO
CREATE PROCEDURE dbo.InsertCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24)
)
AS
SET NOCOUNT OFF;
INSERT INTO [dbo].[Customers] ([CustomerID], [CompanyName], [ContactName], [ContactTitle], [Address], [City], [Region], [PostalCode], [Country], [Phone], [Fax]) VALUES (@CustomerID, @CompanyName, @ContactName, @ContactTitle, @Address, @City, @Region, @PostalCode, @Country, @Phone, @Fax);
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'UpdateCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.UpdateCustomers
GO
CREATE PROCEDURE dbo.UpdateCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24),
@Original_CustomerID nchar(5)
)
AS
SET NOCOUNT OFF;
UPDATE [dbo].[Customers] SET [CustomerID] = @CustomerID, [CompanyName] = @CompanyName, [ContactName] = @ContactName, [ContactTitle] = @ContactTitle, [Address] = @Address, [City] = @City, [Region] = @Region, [PostalCode] = @PostalCode, [Country] = @Country, [Phone] = @Phone, [Fax] = @Fax WHERE (([CustomerID] = @Original_CustomerID));
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
====================================================================================
I executed the above code in my SQL Server Management Studio Express (SSMSE) and I got the following error messages:
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'NORTHWIND'. No entry found with that name.
Make sure that the name is entered correctly.
===============================================================================================================
I know I recreated the NORTHWIND Database from a different Database before and I did not do anything for the entry in sysdatabases. How can I change the entry in sysdatabases for database 'NORTHWIND' now? Please help and advise.
Thanks in advance,
Scott Chang
Im trying to use VB.net 2005 to write a sample app to access a DB. Are there any samples for this and any samples of how I go about making the DB in the first place?
View 1 Replies View RelatedSSMS is fail and show this ERROR : "Cannot find one or more components. Please reinstall the application."
What Can i do?
Hi all,
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
I made a point type by C# for deploying in SQL2005.
It builds successfully every time.
When I deploy, it gives the following error:
"Error: Type "SqlServerProject1.TypePoint" is marked for native serialization, but field "x" of type "SqlServerProject1.TypePoint" is not valid for native serialization." although x variable is value type decimal.
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
[Serializable]
[SqlUserDefinedType(Format.Native, IsByteOrdered=true)]
public struct TypePoint : INullable
{
private bool m_Null;
private Decimal x;
private Decimal y;
public override string ToString()
{
// Replace the following code with your code
if (IsNull) // added part
{
return "null";
}
else
{
return x + ":" + y;
} // end of this part
// return "";
}
public bool IsNull
{
get
{
// Put your code here
return m_Null;
}
}
public static TypePoint Null
{
get
{
TypePoint h = new TypePoint();
h.m_Null = true;
return h;
}
}
public static TypePoint Parse(SqlString s) // Most Important Part
{
if (s.IsNull)
{
return Null;
}
else // added part
{
TypePoint p = new TypePoint();
string str = s.ToString();
string[] xy = str.Split(':');
p.x = Decimal.Parse(xy[0]);
p.y = Decimal.Parse(xy[1]);
return p;
}
}
public Decimal X
{
get
{
return x;
}
set
{
x = value;
}
}
public Decimal Y
{
get
{
return y;
}
set
{
y = value;
}
} // end of added part
// This is a place-holder method
public string Method1()
{
//Insert method code here
return "Hello";
}
// This is a place-holder static method
public static SqlString Method2()
{
//Insert method code here
return new SqlString("Hello");
}
// This is a place-holder field member
public int var1;
}
Sorry if this is the wrong forum, but it seems the most appropriate. My "Teach yourself about .Net, Life, the Universe and Everything" book uses the Northwind database in Sql Server format. Is this available for download somewhere?
View 1 Replies View RelatedI have to do an exercize where i am using Northwind sample database. I am normally accustomed to linking to a database on another server. Is there a way i can just include the Northwind database to my project. In general, I need to find out how to link to the Northwind db so I can start querying and processing data. thanks for your help
View 4 Replies View Relatedi need links from where i can download northwind database both access and sql format thanx
View 2 Replies View RelatedI want use the the Northwind database do some example! I had installed the Visual Web Deveplopment Express Edition and installed the SQL Server 2005 Express Edition .but I build one new Website and connect the Northwind database but i can't find the it from the Database Explorer.why?
View 1 Replies View RelatedCan't open Northwind - asp.net - dataaccess-sqldatasource
I remembered doing walkthrough using Northwind. However it wasn't an http project but a file project using the development server. Northwind allowed me to add, edit and insert, and the web page looked fine.
I opened a simple project just to see whether I could get my sqlserver on the internet. (vs studio 2005, sqlserver 2005)
I created the project in http location http://localhost/Northwind . I dragged a sqldatasource to the page, configuring it to display ID and ProductName. I clicked advanced, but noticed the generate insert, edit and delete were grayed out. That told me something was wrong with my authetification.
I configured my sqlserver 2005 to have integrated security.
I built the solution and website, then pressed cntl-F5. I got a login error. Nowhere did the page ask me for username and password. First questions - how do I get this to open up a web page, and how to I get it to allow me to generate insert, edit and delete statements?
dennist685
Server Error in '/Northwind' Application.--------------------------------------------------------------------------------
Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'YOUR-02910F1DF1ASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'YOUR-02910F1DF1ASPNET'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'YOUR-02910F1DF1ASPNET'.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.DetailsView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.DetailsView.EnsureDataBound() +181 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.PreRenderRecursiveInternal() +41 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
sara writes "Dear Sir/Madam,
I use Sql Server 2005.I want to use Northwind Database & I have it but I could not Execute That It is the error:
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'NorthwindCS'. No entry found with that name. Make sure that the name is entered correctly.
Would you please help me with that?
Regards,
Sara"
Hi I have just started using the SQL Server 2005 Express Edition and wondering how to install the InstNwnd.sql from the sql file. I can't find any way to insert the database
Any help would be very appreciated
Thanks
OK
I've loaded MSDE and its running OK
I've run config.exe to install the sample .net databases,
......but I cannot find northwind or anyother db on the server!
I've never done any db work befor so may be I'm being a bit of a tit!!! sorry in advance if i am...
stuart
I've running MSDE on a win xp box with SP2. The SQL server service manager indicates that the SQL server is running. I'm using Visual Studio 2003. According to the install page for 101 VB and C# Code Samples I should install the .NET frameword samples db.. See http://www.microsoft.com/downloads/details.aspx?FamilyId=08E3D5F8-033D-420B-A3B1-3074505C03F3&displaylang=en
I cd to the appropriate dir and run osql -E -S (local)NetSDK -i InstNwnd.sql (the cmd given on the page noted above). I get the following error:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsPhilip Toews>cd C:Program FilesMicrosoft Visual Stud
io .NET 2003SDKv1.1SamplesSetup
C:Program FilesMicrosoft Visual Studio .NET 2003SDKv1.1SamplesSetup>osql -
E -S (local)NetSDK -i InstNwnd.sql
[DBMSLPCN]SQL Server does not exist or access denied.
[DBMSLPCN]ConnectionOpen (Connect()).
C:Program FilesMicrosoft Visual Studio .NET 2003SDKv1.1SamplesSetup>
I'm a newbie to .NET and SQL server so this makes no sense to me. If the SQL server service manager indicates that the SQL server is running why do I get that error and what is the work around?
Thanks .NET great ones for helping a newbie get off the ground...
:-)
I'm installing Northwind Database onto Local Computer. The Computer's Name is (Localhost)The Installation Menu is asking to for the [Enter Name of the (Server)] "______________________" Am I correct in assuming to Enter Localhost - for the [Enter Name of the (Sever)]. "___Localhost_____" Can someone comfirm as to whether this is correct or not... Thank You.
View 2 Replies View RelatedI have installed MS SQL server eval edition and read through a lot of BOL, just about got my head around users and authentication etc and have a pretty good grounding on db design and architecture.
I now want to mess around with the sample databases a bit to get used to the SQL server interface before I start creating new ones etc but beyond random simple queries that I make up i'm struggling with what to do. I'm sure there are some microsoft tutorials based on the northwind and pubs databases I just cant seem to find any anywhere.
Any suggestions greatfully recieved, Cheers
Dan