Where Do I Change The From Email Display Name For RS2005?
Jul 20, 2007
All of the subscription emails that go out has a "From" display name of "POP3", so when the receipients receive the email, they see "POP3" in the "From" field. I would like to change this so ill-informed users don't delete the emails thinking they're junk/virus email.
Of course if the email software being used by the receipients doesn't support displaying a "From" name, then only the actual email will show and, in that case, it will be perfectly fine.
I'm trying to account for the less-than-educated end-users with minimal literacy in computers.
Does anyone know how to change this? Thanks!
View 3 Replies
ADVERTISEMENT
Jan 27, 2007
UPDATE.
I am now checking with our IT if the SMTP corporate server has the correct relay authorisation for the new server. I may have overlooked this issue.
Hello,
Om my previous report server, I had not set amy DefaulthostName nor PermittedHost.
This allowed us to create subscriptions that get sent to our business partners with a long ever changing lists of email addresses and domains.
All server are build 2175, they ahve the same rsreportserver.config setting for the email portion. Problem is that on 2 of the servers, the email with a domain other than our internal domain do not get sent with error "The email address of one or more recipients is not valid". It works on the third server.
I tested our SMPT server from another application and it does send emails to external domains so the problem is really on the server side.
It is vey important because subscriptions are managed by a few business analysts, they spend a lot of time creating lot of subscriptions and the domains change often.
I tried on the dev server to define cox.net as Permitted host and send myself a report to my private email, it also returned the error.
Any idea as where to look at? is ther a specific CDO setting to allow relay?
Thanks,
Philippe
<SendEmailToUserAlias>False</SendEmailToUserAlias>
<DefaultHostName></DefaultHostName>
<PermittedHosts></PermittedHosts>
ReportingServicesService!emailextension!4!01/27/2007-11:47:12:: Error sending mail, CDO error -2147220977, will not resend
ReportingServicesService!emailextension!4!01/27/2007-11:47:12:: Error sending email. System.Runtime.InteropServices.COMException (0x8004020F): The server rejected one or more recipient addresses. The server response was: 550 5.7.1 <me@cox.net>... Relaying denied. IP name lookup failed [10.100.15.87]
at ReportingServicesCDOInterop.MessageClass.Send()
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
View 3 Replies
View Related
Jun 30, 2006
HI,
How can I programmatically change the properties of Send Mail task using Script Task. I want to change the From, To and Attachment parameters of the Send Mail task.
If the Script Task can't do it, Is there any alternative to do?
Thanks
View 1 Replies
View Related
Sep 21, 2015
I just moved our SSRS server from one machine to another. It was sending our report emails from a service account. So when my end users get the emailed report it was from a service account (reports@blah.com) .Â
Now that I moved the DB to another server - the reports get emailed successfully - but they are being sent from my email address!Â
I have checked the rsreportserver config file. I also checked in the report server smtp setup and they both show the service account. I even checked the subscription owners and accounts.
SSRS is using my account, but I can't find where it's getting it from. Where else can I look?
View 3 Replies
View Related
Sep 28, 2005
I have a db; that stores a company name; if the end user types in
The Stoneware Jar Company
I would like to display:
Stoneware Jar Company
All company names entered like that with no preceding "The"
How can I display something diff on my ASP Page? Possible?
View 20 Replies
View Related
Jan 30, 2004
I have a column in the following select startement called displayvalue. Displayvalue is a varchar column. Primary everything entered into this column is numeric, but there are times when NR is entered. In the select query if it sees NR, I would like to have NR changed in the resultset to NULL or blank. NR doesn't come up all of the time, but I have not idea how to do this in the select statment.
Here goes..
SELECT SAMPLE.SAMPLEID, SAMPLE.U_WORKORDERNUMBER, SAMPLE.U_SAMPLEDATETIME, SDI.PARAMID, SDI.DISPLAYVALUE
FROM SAMPLE SAMPLE, SDIDATAITEM SDI
WHERE ( (SAMPLE.SAMPLEID = SDI.KEYID1) AND
(SAMPLE.U_WORKORDERNUMBER = '0060') AND (SAMPLE.U_SAMPLEDATETIME > '31-DEC-2003') AND (SDI.PARAMID = 'BOD') )
ORDER BY SAMPLE.SAMPLEID ASC, SDI.PARAMID ASC
View 1 Replies
View Related
Apr 9, 2004
Hi,
Is it possile to definea custom format for the 'display format' property of a measure so that the results are shown in Thousands or Millions or Billions e.g
100,000 can be shown either as 100T
OR
1,000,000 can beshown as 10M
OR
10,000,000 1B
Sorry if I got my numbers wrong but I hope you get the idea?
Looking forward to your help. Thanks
View 1 Replies
View Related
Oct 2, 2007
Hi there
Assuming this is the query used to return this result:
select dept.name, count(prj.id) from department dept, project prj where prj.id = dept.uid group by dept.name
Dept, TotalProj
A , 10
B , 5
C , 2
Question: How do I change the query so that the result will return as follows:
Dept/TotalProj
A, B, C
10, 5, 2
View 5 Replies
View Related
Sep 18, 2015
today MDS can send emails only when there is validation failures.I need to send an email when a value change to some users, but I dont want to make the record has failed. its not a validation.so I'm looking for a custom workflow doing this.is there some libraries of workflow available?
View 2 Replies
View Related
May 13, 2014
I am interested in changing the way that data is displayed in my result set.Essentially I want to display a selection of rows (1 to n) as columns, the following diagram explains my intentions.Perhaps one of the greatest challenges here is the fact that I do not have a concrete number of rows (or BIN numbers). Each stock item could be stored in one or more BINS, which I will not know until running my query.
View 2 Replies
View Related
Feb 11, 2015
I want to change the display message when else is 0 to show "non active member", how to edit this query for this result .
---------------------------------------------------------------
Current Query
cast(sum(case when trx_date > dateadd(month, -3, getdate()) then 1 else 0 end) as varchar(10))+ ' Active Member := '+ user_member
---------------------------------------------------------------
I try this query but not work and prompt error.
cast(sum(case when trx_date > dateadd(month, -3, getdate()) then 1 else "non active" end) as varchar(10))+ ' Active Member := '+ user_member
----------------------------------------------------------------
View 1 Replies
View Related
Dec 18, 2007
I have a report parameter named "Schools" which display a list of schools. For example, Alo elementary school, Balo middle school and Calo high school.
When "Alo elementary" is selected the report only display students from that school along with other assessments data fields. same goes for other schools too. But I want to display different data fields for "Calo high school" when it is selected. It is not currently possilbe becasue I am using the same template for all types of schools. There some fields only should be displayed for "Calo high school" but not for any other type of schools.
I can accomplish this by creating two separate report, one for "Calo high school" and the other for other schools. But I want to accomplish this just by creating one report. So when "Alo elementary school" is selected it displays report with certain fields and when "Calo high school" is selected then it displays same fields as "Alo elementary school" but as well as some other fields too in the report. Is this possible? Need help.
View 4 Replies
View Related
Apr 13, 2015
I've selected a domain-based attribute for one of the leaf member attributes in the same entity, aka parent id, since it's a self-referencing entity. However, I cannot find a way to display anything but the code value in the drop-down (see below).
Is there a way to change the display value so that I can choose the attribute from the entity from which I want the user to choose? In other words, I would like to display the hierarchy name instead of the code, which is really just the primary id.
View 5 Replies
View Related
Feb 11, 2007
How do you set up user as who can access what report in Report Manger. I do not see security tab in RS2005.
View 1 Replies
View Related
May 5, 2008
Hi all,
I really need help with this issue.
I have a setup a reporting server that works perfectly when accessing it from the intranet. Now I need to give access to this report server over the intranet.
I'm stomped...
The network guys did create a secure access to my report server so I can access my server using :
https://<MySecureRS>/reports
The issue I'm facing is that once I authenticated my self using https://<MySecureRS>/reports
It shows the internal ip addres of my server in the browser.... http://<My internal IP Adress>/reports
How can I configure my server to stay on my secure address?
Thanks
Aiwa
View 4 Replies
View Related
Aug 11, 2006
Hi,
As per my reading, using RS2005 with backend database as SQL 2000 is
possible.
Can anyone tell me whether RS2005 connect to SQL 2000 database on same same
machine. i.e. in short can RS2005 reside with SQL 2000?
Which edition of RS 2005 support backend as SQL2000?
TIA,
Tanmaya
View 3 Replies
View Related
Apr 13, 2007
Has anyone used the MDX Scope Statement in a RS2005 Reporting Services
Report?
I am not sure if the scope / end scope statement will work in a RS report script.
Thanks,
View 4 Replies
View Related
Jan 10, 2007
I have a report that needs to show postal addresses. The address is broken down into several fields. The problem I have is some of the address parts are optional. If they are empty, I'm left with nasty gaps in the address. I'd really like next label to reclaim the space of any empty labels.
a quick example
A full address would look like this..
customer name
address line 1
address line 2
town
county
post code
if address line 2 isnt given, I get:
customer name
address line 1
town
county
post code
but I want:
customer name
address line 1
town
county
post code
Can anyone help?
Many thanks,
Paul
View 4 Replies
View Related
Jan 24, 2007
Are trend lines supported in RS2005, and if so how do you produce them?
Thanks,
Peter Cwik
Trizetto
View 11 Replies
View Related
Jul 10, 2007
I installed RS2005(SP2) with a SQL2000(sp4) db. Both are on seperate Windoes 2003 servers. I configured the reports manager to connect to a different web site on the same server instead of default web site. There were no installation prohlems. The RS server is up and running , all the virtual directories setup etc. When I try to access the reports directory via: http://dev2/Reports or browse the reports virtual directory from IIS, I get a 401 access denied error. The RS log reads:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>D:ReportingServices2005MSSQL.1Reporting ServicesLogFilesReportServerWebApp__07_10_2007_11_29_21.log</Path>
<SystemName>NWISTCST99</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/10/2007-11:29:22:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!5!7/10/2007-11:29:30:: e ERROR: The request failed with HTTP status 401: Unauthorized.
w3wp!ui!5!7/10/2007-11:29:31:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel(HttpsLevel level)
at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!5!7/10/2007-11:29:32:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
Please advise.
The RSweApplication.config in the ReportManager folder has the fully qualified URL to ReportServer<ReportServerUrl> and I have blanked out the <ReportServerVirtualDirectory>
Also the <UrlRoot> in rsreportserver.config in ReportServer folder points to the fully qualified URL to ReportServer.
What am I missing here ..?
View 6 Replies
View Related
Feb 9, 2007
I am not able to deploy report to report server, I have this error:
The permissions granted to user <IUSR_MashineName> are insufficient for performing this operation.
View 2 Replies
View Related
Jan 8, 2007
Well, I finally got RS2005 installed on Vista, only problem is, now it won't run. I've installed SP2 (Ctp) and still no joy. It just errors when attempting to access the web service.
Here's the error:
w3wp!library!5!01/08/2007-20:36:56:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.ReportingServices.Authentication.WindowsAuthentication.GetUserInfo(IIdentity& userIdentity, IntPtr& userId)
at Microsoft.ReportingServices.WebServer.WebServiceHelper.ConstructRSServiceObjectFromSecurityExtension()
at Microsoft.ReportingServices.WebServer.Global.ConstructRSServiceFromRequest()
at Microsoft.ReportingServices.WebServer.Global.get_Service()
at Microsoft.ReportingServices.WebServer.Global.ShouldRejectAntiDos()
at Microsoft.ReportingServices.WebServer.Global.Application_AuthenticateRequest(Object sender, EventArgs e)
Any clues anyone? I'm all out.
Cheers,
Paul
View 3 Replies
View Related
Jul 23, 2007
How do I drill through to a report from a report that's in a different directory? In the designer I can only drill through to reports that are in that project. I'm sure that there is a simple solution (hopefully!).
View 1 Replies
View Related
Jul 6, 2015
I have a report that gets sends out through a subscription and sometimes the report has multiple pages and all those pages appear within one email.Is it possible to set the subscription in such a way that an email is sent per page when the subscription executes.
View 2 Replies
View Related
May 4, 2007
Under IIS SMTP I can set bounced email redirect etc. how to do that with dbmail, the idea is I can get the list of bounced emails somewhere so I can create a report.
Any idea?
thanks
View 2 Replies
View Related
Nov 27, 2007
Hi there,
I've got a RS2000 report from Analysis services 2000. This report is working fine but after the upgrade to SQL2K5, i'm having issues with changes to parameters.
Basically i'm passing DateQuarter, CustomersLevel as parameters to the following mdx script. I've tried to change mdx script in RS2005 but no luck yet. I don't much about the parameter level changes in sql2k5. So can anyone suggest what is wrong in the script.
Code Block
RS2000
="with " &
"member [Measures].[Ex Price] as 'coalesceempty([Measures].[Ex Price After Trade Discount - Detail],0.00)' " &
"set [Rolling Quarters] as '" + Parameters!DateQuarter.value +".lag(4):" + Parameters!DateQuarter.value + "'" &
"SELECT " &
"{[Measures].[Ex Price]} ON COLUMNS , " &
"filter({CrossJoin([Items by Class].[Item Class Description].members, [Rolling Quarters])}, [Measures].[Ex Price] > 0) on Rows " &
"FROM Sales " &
"WHERE (" & Parameters!CustomersLevel.Value & ")"
RS2005
with
member [Measures].[Ex Price] as 'coalesceempty([Measures].[Ex Price After Trade Discount - Detail],0.00)'
set [Rolling Quarters] as '@DateQuarter' +'.lag(4):' + '@DateQuarter'
SELECT
{[Measures].[Ex Price]} ON COLUMNS ,
filter({CrossJoin([Items by Class].[Item Class Description].members, [Rolling Quarters])}, [Measures].[Ex Price] > 0) on Rows
FROM Sales
WHERE STRTOSET(@CustomersLevel)
Thanks in advance,
Vivek
View 4 Replies
View Related
Jul 13, 2007
Hello,
I am using RS 2005 to design reports.
There's no problem when I connect to an Analysis Services 2005 cube.
But when I try to connect to an AS 2000 cube (Foodmart)...
I have read in this forum that I can use "Microsoft SQL Server Analysis Services" provider (or OLE DB)...
Can someone help me please!!
Thank you
View 2 Replies
View Related
Jan 24, 2008
Can I author report projects in VS Studio 2008 that I deploy to a RS2005 Report Server?
Our development staff has upgraded to VS2008 for our DLLs, Web sites, and console apps... no problem there whatsoever. But we have SQL2005... obviously, since SQL2008 appears to be along way off.
So, it seems like an obvious question... although I'm dreading the response. My experience with getting RS2005 installed and configured correctly was simply horific. In fact, so bad, I'm considering dumping RS altogether and going with a more reliable 3rd party tool... MS has truly done everything in the power to botch this one or so it would seem.
View 1 Replies
View Related
Oct 26, 2007
I am new to RS. The Report developers want a way to move a report and its subscriptions to a different RS2005 instance. They tell me they can move the report but have to manually add the subscriptions back. Is that true? Is there no friendly way to move the subscriptions?
Thanks,
Michael
View 1 Replies
View Related
Feb 5, 2007
We successfully migrated our RS2000 to RS2005. But we run into an issue €“ trying to modify an existing subscription that was created on RS2000 (We do not have this problem if the subscription is created on RS2005).
The error message is:
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help.
The specified @name (€˜B3F7CB60-6636-4F67-93CF-B94C052DFD29€™) already exists.
The call stack is:
w3wp!library!d!02/05/2007-14:31:10:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: The specified @name ('B3F7CB60-6636-4F67-93CF-B94C052DFD29') already exists.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.SqlAgentScheduler.CreateTask(Task task)
at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task)
at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule)
at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData)
at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData)
at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings)
at Microsoft.ReportingServices.Library.RSService._SetSubscriptionProperties(String subscriptionID, ExtensionSettings extensionSettings, String description, String eventType, String matchData, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings)
at Microsoft.ReportingServices.Library.RSService.SetSubscriptionProperties(Guid batchId, String subscriptionID, ExtensionSettings extensionSettings, String description, String eventType, String matchData, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings)
--- End of inner exception stack trace ---
The error message is raised from the stored procedure sp_verify_job:
-- NOTE: We allow jobs with the same name (since job_id is always unique) but only if
-- they originate from different servers. Thus jobs can flow from an MSX to a TSX
-- without having to worry about naming conflicts.
IF (EXISTS (SELECT *
FROM msdb.dbo.sysjobs
WHERE (name = @name)
AND (originating_server = @originating_server)
AND (job_id <> ISNULL(@job_id, 0x911)))) -- When adding a new job @job_id is NULL
BEGIN
RAISERROR(14261, -1, -1, '@name', 'name')
RETURN(1) -- Failure
END
which is called by another stored procedure sp_add_job.
Question:
Is there anyway that I can workaround this issue? Or is there anyway that I can re-create existing report server subscriptions (I have 300+ subscriptions) programmatically.
Please help.
Bobby Fu
View 2 Replies
View Related
Jan 30, 2007
I am using RS 2K5 to develop financial reports, with plenty of figures that must fit in a page.
I use tables for example. Fonts cannot be set smaller than 8pts.
I have also tried to decrease row height and to disable the "can grow to fit content" option, but of course in this way the text gets cut of in its lower part.
How can I do lines more compact? I need to reduce line spacing and to make the data more dense. Currently it looks very sparse.
Is it a known limitation for RS? Any workaround available? Any online example with dense reports?
Thank you.
View 1 Replies
View Related
Sep 20, 2006
I have a RS2005 report that was deployed to a ReportServer and has been running for over 1 month. I personally have not run this report in the past month, however, today when I tried to run it I got an error trying to select a date parameter. I can't paste samples of the windows displayed, so I'll do my best to explain. When I click on the report, it goes to the View window and displays 2 date parameter fields. When I click the icon next to one of the parameter fields, I get an error window that says
A Runtime Error has occurred.
Do you wish to Debug?
Line: 383
Error: 'resultfield.id' is null or not an object
I click Yes and get a VS Just-in-Time Debugger window, where I choose New instance of VS 2005. When VS2005 opens, then I get this error:
Microsoft JScript runtime error: 'resultfield.id' is null or not an object
The Continue option just keeps displaying this error, when I click Break it shows me the code below and has highlighted the line I show in BOLD:
function ClickDay(date)
{
var win = document.parentWindow;
if (!win) win = document.contentWindow;
if (!win) win = document.defaultView;
if (!win) return true;
var ifrm=win.frameElement;
if (ifrm==null)
{
return MoveToDate(date, false);
}
var eltValidator=win.parent.document.getElementById(ifrm.resultfield.id+g_strDatePickerRangeValidatorID);
if (eltValidator !=null)
{
eltValidator.style.display="none";
}
var OnSelectDateCallback=ifrm.OnSelectDateCallback;
OnSelectDateCallback(ifrm.resultfield, date);
var resultfunc=ifrm.resultfunc;
resultfunc(ifrm.resultfield);
return true;
}
To make this more confusing, after I get this error a few times, eventually it lets me choose a date and run the report. Another quirk of my PC is that I often get runtime errors that ask me if I want to Debug when I'm in IExplorer.
Any idea what is going on and how to fix it?
Thanks in advance!
View 6 Replies
View Related
Mar 23, 2006
Hi
When I try to print a very simple report with rs2005 via the print button on the http://servername/report/pages/... website, it says "printing" but nothing happend. When I look at the server (win2003 SP1 + latest hotfixes) the www and sql2005 (SP1 CTP installed) services eat up 100% cpu for ever.
I get no error messages neither in the rs log's nor in os application or system log. With profiler I found out, that there must be some loop. The following stored procedure exec DeletePersistedStreams @SessionID='24iumm55mp32l2ie2nezs0y0'is called about 650 times per second, which explain the load. The only way to stop this, is shut down and restart the www service.
This behaviour can be found with all reports.
The call, view and export of the same reports to pdf, xls, ... works without problems.
Any ideas?
Thanks for your help
Peter
View 6 Replies
View Related
