We are running transactional replication on sqlserver 2000 and I see the following message: "The initial snapshot for article reason_type is not yet available" Followed 10 minutes later by a "timeout expired" event (we see lots of these). I see no reason for a snapshot to even be running at 3:04 AM but then, it apparently was so what can I say. The Snapshot agent history does not show any entries for the last year so that is a bit of a mystery. The table in question seems identical at both the publisher and subscriber (including content).
Any ideas why this message would appear? It appears that a snapshot for this article was somehow involved but I thought a snapshot was only created by specific request.
I run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound). What is a reasone for the error? What to do?
I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid" What is a reason for error?
I am having trouble specifying a message body that is valid. I mean for the client to send. If I leave it as null then everything is ok but if I create a memorystream and add a line of text it reports back it did not pass validation. I do not understand this and am not sure what to do. I need to send a message based on a code and text but do not know the format of the body that is allowed. The code I am refering to comes out of HelloWord_CLR because that is what I am formating my sample after. I call it the same way it calls the return message done in ServiceProc. I need to know the message format including body since this does not seem to work. A sample of the call is bellow.
// Create an empty request message
string Msg = "Hello";
MemoryStream body = new MemoryStream(Encoding.ASCII.GetBytes(Msg));
I have basic knowledge of SQL Server and Expert in MS Access
Know I want to change my Access Database into Database. Now what i required is when I create any Procedure then we use a condition helping keyword 'Where'
No what I required is when I execute any procedure using where clause It must open a Input Box where I put a condition
For Example when I create a procedure like this
create Procedure prc_Demo ( a int, as Select * from employee where emp_id = 'a' )
Something like that So I want when I execute this then there must be open a box where I type emp_id then it show matching the result
Has anyone encounterd this message in the sql log: ----- BACKUP LOG WITH TRUNCATE_ONLY or WITH NO_LOG is deprecated. The simple recovery model should be used to automatically truncate the transaction log. ----- DB's are in simple recovery mode and only a daily backup is being done on DB's. It almost seems that SQL is doing something internally.
i m using dynamic connection in rdl file firstly i m showing username and pwd . after this user name and pwd i make a connection string for my report. when i m entering invalid pwd, than report generate an error. and stop. is there any way by which i can trace error and flash a message box to user about his invalid user name or pwd.
I sent a message from Server A to B. I didn't end the conversation. The message is stuck in sys.tranmission_queue with no error message (empty) . the initiatorQueue is empty (no records). why doesn't the message get sent ?
I have a service broker service and there are multiple clients that can put messages in the queue of that service. How do I check which message comes from which client? There is no field in the queue like message_senderId or something like that.
I have a SQL Express database on our server that is used for one of our websites when the website tries to write to the database I get the following error: - An attempt to attach an auto-named database for file D:lahwebsitesGiants North Walesapp_datadatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. This error is very frustrating and I really can't find a way around it. I have done the following: -
Deleted the SQL Server Express folders under user preferences
Hi,I am trying to write some C# ASP.NET 2.0 code. I have created a web form to send data to my sql server 2005 database. When I compile the application and insert data then click on the submit button I get this error
"A first chance exception of type 'System.Data.SqlClient.SqlException' occurred in System.Data.dll" I have been trying to solve this for a few days now with no luck, so any help would be appreciated. I'll post below the source code of the web form (addOrder.aspx). It might be worth mentioning that I have created another web form in the same project called addCustomer.aspx. Like addOrder.aspx it is a web form, however it successfully inserts data in the database. 1 <%@ Page Language="C#" MasterPageFile="~/Default.master" Title="Add Order Page" %> 2 <%@ import namespace="System.Data.SqlClient" %> 3 <%@ Import Namespace="System.Data" %> 4 <%@ Import Namespace="System.Web" %> 5 <%@ Import Namespace="System.Configuration"%> 6 <%@ Import Namespace="System.Globalization"%> 7 8 <script runat="server"> 9 10 protected void Page_Load(object sender, EventArgs e) 11 { 12 13 } 14 15 protected void sumbitButton_Click(object sender, EventArgs e) 16 { 17 SqlConnection conn; 18 SqlCommand comm; 19 string connectionString = 20 ConfigurationManager.ConnectionStrings[ 21 "ShippingSystemConnectionString1"].ConnectionString; 22 conn = new SqlConnection(connectionString); 23 comm = new SqlCommand( 24 "INSERT INTO Order(CustomerID, " + 25 "NumberofItems, DescriptionsofItems, SafeItems) " + 26 "VALUES (@CustomerID, " + 27 "@NumberofItems, @DescriptionsofItems, @SafeItems)", conn); 28 comm.Parameters.Add("@CustomerID", System.Data.SqlDbType.Int); 29 comm.Parameters["@CustomerID"].Value = int.Parse(DropDownList1.SelectedValue); 30 comm.Parameters.Add("@NumberofItems", System.Data.SqlDbType.Int); 31 comm.Parameters["@NumberofItems"].Value = numofitemstxt.Text; 32 comm.Parameters.Add("@DescriptionsofItems", System.Data.SqlDbType.VarChar); 33 comm.Parameters["@DescriptionsofITems"].Value = descofitemstxt.Text; 34 comm.Parameters.Add("@SafeItems", System.Data.SqlDbType.VarChar); 35 comm.Parameters["@SafeItems"].Value = safetxt.Text; 36 try 37 { 38 conn.Open(); 39 comm.ExecuteNonQuery(); 40 Response.Redirect("Success.aspx"); 41 } 42 catch 43 { 44 } 45 finally 46 { 47 conn.Close(); 48 } 49 } 50 51 52 53 protected void CustomerIDList_SelectedIndexChanged(object sender, EventArgs e) 54 { 55 56 } 57 </script> 58 59 <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> 60 <table style="position: static"> 61 <tr> 62 <td style="width: 169px"> 63 Customer ID:</td> 64 <td style="width: 100px"> 65 <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource1" 66 DataTextField="CustomerID" DataValueField="CustomerID" Style="position: static"> 67 </asp:DropDownList><asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ShippingSystemConnectionString1 %>" 68 SelectCommand="SELECT [CustomerID] FROM [Customer]"></asp:SqlDataSource> 69 </td> 70 <td style="width: 178px"> 71 </td> 72 </tr> 73 <tr> 74 <td style="width: 169px"> 75 Number of Items:</td> 76 <td style="width: 100px"> 77 <asp:TextBox ID="numofitemstxt" runat="server" Style="position: static"></asp:TextBox></td> 78 <td style="width: 178px"> 79 <asp:RequiredFieldValidator ID="RequiredFieldValidator3" runat="server" ControlToValidate="numofitemstxt" 80 ErrorMessage="Number of Items Required" Style="position: static"></asp:RequiredFieldValidator></td> 81 </tr> 82 <tr> 83 <td style="width: 169px"> 84 Descriptions of Items:</td> 85 <td style="width: 100px"> 86 <asp:TextBox ID="descofitemstxt" runat="server" Style="position: static"></asp:TextBox></td> 87 <td style="width: 178px"> 88 <asp:RequiredFieldValidator ID="RequiredFieldValidator4" runat="server" ControlToValidate="descofitemstxt" 89 ErrorMessage="Description Required" Style="position: static"></asp:RequiredFieldValidator></td> 90 </tr> 91 <tr> 92 <td style="width: 169px"> 93 Are Items safe:</td> 94 <td style="width: 100px"> 95 <asp:TextBox ID="safetxt" runat="server" Style="position: static"></asp:TextBox></td> 96 <td style="width: 178px"> 97 <asp:RequiredFieldValidator ID="RequiredFieldValidator5" runat="server" ControlToValidate="safetxt" 98 ErrorMessage="Are Items Safe?" Style="position: static"></asp:RequiredFieldValidator></td> 99 </tr> 100 <tr> 101 <td style="width: 169px"> 102 <asp:ValidationSummary ID="ValidationSummary1" runat="server" Style="position: static" /> 103 </td> 104 <td style="width: 100px"> 105 <asp:Button ID="sumbitButton" runat="server" OnClick="sumbitButton_Click" Style="position: static" 106 Text="Submit" /></td> 107 <td style="width: 178px"> 108 </td> 109 </tr> 110 </table> 111 </asp:Content> 112 113 My order table in SQL server 2005 (express) looks like this:
I have the following sql statement which produced an error when I add the order by clause
SQL = "SELECT DISTINCT nc_department.department, Count(nonconformance.department_id) as 'events', ISNULL(SUM(nonconformance.nc_wafer_qty),0) as wafers FROM nc_department LEFT OUTER JOIN nonconformance ON nc_department.department_id = nonconformance.department_id WHERE nc_department.active = '1' GROUP BY nc_department.department ORDER by nc_department.order_id"
This is the error I get:
ORDER BY items must appear in the select list if SELECT DISTINCT is specified.
I'm catching a primary constraint error in SQL and don't want to return the SQL error message back to the client. Is there any way to stop this. Thankyou
I finally installed MSDE and have the icon in my tray at the bottom of the screen. When I try to connect to a database using the wizard in the web matrix program I get this message: Unable to connect SQL Server does not exist of access denied Connection Open (Connect ()) What might be wrong?? Thanks for your help I'll get it soon (I hope) Del Dobbs
WHEN I TRY TO RUN A PROGRAM WHICH BINDS A DATAGRID CONTROL TO A SQL SERVER TABLE I GET A ERROR MESSAGE LIKE [SQL EXECEPTION LOGIN FAILED FOR HOMECOMPUTER/ASPNET] . IF U KNOW WHAT MIGHT COZ THE PROBLEM PLEASE TELL ME.
IAM RUNNING THE MICROSOFT SQL SERVER FORM MY HOME COMPUTER I.E (LOCAL) . IS THERE SOME SETTINGS THAT I NEED TO DO BEFORE RUNNING A PAGE WHICH CONNECTS TO THE SQL SERVER.
I am trying to set a text field as the primary key for a SQL SERVER Express 2005 Database in Visual Studio. I used the following Command:ALTER TABLE Tablename ADD PRIMARY KEY (fieldname);where you substitute table name and fieldname for the appropriate fields. The error message I am getting is:SQL Execution Error.Executed SQL statement: ALTER TABLE Lake ADD PRIMARY KEY(wbic);Error Source .Net SqlClient Data ProviderError Message: Column 'wbic' in table Lake is of a type that is invalid for use as a primary key column or index.Could not create constraint. See previous errors.How can I fix this so any type of field can be a primary key?
I am extracting data out of Lotus Notes into an Oracle DB using EM. I keep getting an error "[Lotus][ODBC Lotus Notes] Data value is not a valid date, time or timestamp" I went ahead and dropped the destination table, and changed all of the "date" columns to varchar's, redefined the transformation, and executed package again, but still get the error. Any ideas?
I am running across this error message: Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Has anyone seen this before? Can you perform a fetch or do a loop? I am kind of new at sql and not really sure how either of these work or how to start to code something like that.
I know that is possible to programmatically send an e-mail with the command xp_sendmail, but i want to know if it's possible to programmatically send a Net Send message.
I am running a program on SQL 6.5 server and I am getting this error message:
Can't allocate space for object '-451' in database 'tempdb' because the 'system' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment. Sort failed: Out of space or locks in database 'tempdb'
Can somebody help me resolve this error message? Thanks a lot
hi, i am getting the following error message whenever i run my sql server. the error message is ================================================== ========
The ODBC resource DLL(c:WINNTsystem32odbcint.dll) is a different version than the ODBC driver manager (C:winntsystem32ODBC32.dll)
You need to reinstall the ODBC components to ensure proper operation. ================================================== =========== i also get the foll message while starting the windows also
================================================== ========== msdtc.exe entry level not found ================================================== ==========
can anyone tell me what should i do to rectify this problem
Error: 0, Severity: 20, State: 0 Stored function 'xp_sqlmaint' in the library 'xpstar.dll' generated an access violation. SQL Server is terminating process 10.
INSERT INTO MAEPROSAP1 SELECT MAEPROSAP.*, NULL as PNUECOD, NULL as PEMP, NULL as PCOST, NULL as PCODIGO FROM dbo.MAEPROSAP WHERE (NOT EXISTS (SELECT MAEPROSAP1.* FROM dbo.MAEPROSAP1 INNER JOIN MAEPROSAP ON MAEPROSAP.PCODPRO = MAEPROSAP1.PCODPRO WHERE dbo.MAEPROSAP1.PCODPRO = dbo.MAEPROSAP.PCODPRO ))
We have an application that users have ability to enter the patient's #SSN and they get all the information of that specific patient. The information comes from SQL database. we have two tables. one table has the patient info the other one has the plan info. Our user wants to see a pop up message saying , "terminated Plan" when they enter the patient's #ssn and the patient's plan_term_date is less than getdate() on the plan table. Is there any way this can be done ??
Hello! In Event viewer window I see error message: Mesg 17309 : The current contents of process' input buffer are 'sp_ddopen'. Do somebody knows were is a problem? Thanks. Alona.
"The description for Event ID (318) in source (SQL Executive) could not be found. It contains the following insertion string(s): Invalid access to memory location."
If you experienced with this kind of problem tell me what to do.
I have a Maintenance Plan set to run every night that Optimizes the databases, runs an Integrity check and then backs them up. Each job is staggered to run 1 hour apart. It has been running fine for months and now I get the following intermittent error during the "Reorganize data and index pages" part: [Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 1934: [Microsoft][ODBC SQL Server Driver][SQL Server]DBCC failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER, ARITHABORT'.
I know what database it is failing on but I run dbcc checkdb and find no errors. From what I have found on the web this error pertains to an index problem. The only indices on this database reside in the system tables. I have dropped the database and restored it but no help there. I am running SQL 2000 SP3 on Windows 2000 Server SP4. Any ideas?
