Where Is The Identity Stored?
Jan 24, 2000Where is the identity stored for a column? Need to know where the value is stored that SQL looks at to increment an Identity Column.
Thanks for your time.
ADVERTISEMENT
@@Identity In Stored Procedure
Jun 28, 2007Hi,I have a stored procedure that insert data into 2 temp tables. The problem that I have is when I insert a data into a first table, how do I get the @@identity value from that table and insert it into the second table?? The following code is what I have:Create #Temp1 @StateID Identity, @State nvarchar(2), @wage moneyINSERT INTO #Temp1 (State, wage)SELECT State, Wage FROM Table1 INNER JOIN Table2 ON Table1.Table1_ID = Table2.Table2_IDCreate #Temp2 @ID Identity @EmployeeID int @StateID Int @Field1 Money @Field2 MoneyINSERT INTO #Temp2 (EmployeeID, StateID, Field1, Field2)SELECT EmployeeID, StateID, Field1, Field2 FROM SomeTable
So, The first part I created a #Temp1 table and insert data into the table. Then after the insert, I want the @@Identity value and insert into the #Temp2 table. This is my first time doing stored procedure, so, I am wondering how do I retrieve the @@identity value and put into the second select statement. Please help. ahTan
@@IDENTITY (without Stored Procedures)
Mar 6, 2008Hi guys, I found this page which explains how to get hold of an @@IDENTITY/the last identity column added from your database without using a stored procedure (I haven't been using these).
http://blog.developers.ie/cgreen/archive/2007/08/20/sqldatasource-getting-identity-after-insert.aspx
Using that as a basis, I have been using the following but nothing is showing in the label that should return the latest identity. Any ideas what I'm doing wrong? I can't figure out why it's not returning anything (the data is going into Orders table fine).
InsertCommand="INSERT INTO [Orders] (...) VALUES (...); SELECT @OrderID = @@Identity"
(Where the OrderID is the PK IDENTITY (auto inc) column of "Orders" table)
my insert command:
<InsertCommands>
<asp:Parameter Direction="Output" Name="OrderID" Size="4" Type="Int16" />
</InsertCommands>
Then I click a button to update the orders table, and ideally I'd see the updated OrderID column appear in the label4 below, but I don't :(
C# Code:
protected void SqlDataSource1_Inserted(object sender, SqlDataSourceStatusEventArgs e) { object newId = e.Command.Parameters["@OrderID"].Value; Label4.Text = newId.ToString();
}
Where Is The Identity Property Stored?
Oct 20, 2006I assume that the identity property is stored within a given database, so there should be no need to run dbcc checkident after restoring from a backup. Is this a correct assumption?
View 1 Replies View RelatedGrab IDENTITY From Called Stored Procedure For Use In Second Stored Procedure In ASP.NET Page
Dec 28, 2005I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies View RelatedProblem With @@IDENTITY In Stored Procedure
Feb 2, 2007Hello !
I just can't access @@IDENTITY in my requests !Here is my stored procedure : (I removed a few lines for clarity)set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[AssignerLicence]
(
@Apprenant int = 0
)
AS
BEGIN
SET NOCOUNT ON;
DECLARE @NBLICENCES int
DECLARE @COMMANDEID int
DECLARE @LICENCEID int
SET @NBLICENCES = (SELECT SUM(commande_licences_reste)
FROM Commande
WHERE commande_valide = 1)
IF
@NBLICENCES > 0
BEGIN
UPDATE Commande
SET commande_licences_reste = (commande_licences_reste - 1)
WHERE commande_id =
(SELECT TOP 1 C_min.commande_id
FROM Commande AS C_min
WHERE C_min.commande_licences_reste > 5
ORDER BY C_min.commande_licences_reste ASC,
C_min.commande_date ASC);
SET @COMMANDEID = @@IDENTITY
INSERT INTO Licence (licence_date_debut, commande_id)
VALUES (GETDATE(), @COMMANDEID)
SET @LICENCEID = @@IDENTITY
UPDATE Apprenant
SET licence_id = @LICENCEID
WHERE apprenant_id = @Apprenant
END
END
But it always throws an error saying that I can't insert null into commande_id (basically, I think @@IDENTITY isn't executed at all)
Any idea why it doen't works ?
Thanks !
Set Identity Not Working For Stored Procedure
Jan 31, 2008Hi can someone tell me whats wrong with this stored procedure. All im trying to do is get the publicationID from the publication table in order to use it for an insert statement into another table. The second table PublicaitonFile has the publicaitonID as a foriegn key.
Stored procedure error: cannot insert null into column publicationID, table PublicationFile - its obviously not getting the ID.
ALTER PROCEDURE dbo.StoredProcedureUpdateDocLocField
@publicationID Int=null,@title nvarchar(MAX)=null,@filePath nvarchar(MAX)=null
ASBEGINSET NOCOUNT ON
IF EXISTS (SELECT * FROM Publication WHERE title = @title)SELECT @publicationID = (SELECT publicationID FROM Publication WHERE title = @title)SET @publicationID = @@IDENTITYEND
IF NOT EXISTS(SELECT * FROM PublicationFiles WHERE publicationID = @publicationID)BEGININSERT INTO PublicationFile (publicationID, filePath)VALUES (@publicationID, @filePath)END
Stored Procedure And Assigning @@IDENTITY Value
Nov 3, 2003In the following stored procedure I would like to test whether @TopCategoryID is null. If so I would like to insert the @CategoryID value into the @TopCategoryID value. So, once @CategoryID recieves the @@IDENTITY value, how do I enter this same value into @TopCategoryID as well???
CREATE PROCEDURE sp_CT_InsertCategory
@Namevarchar(50),
@Description varchar(250),
@topCategory bit,
@ParentCategoryID int,
@TopCategoryID int,
@CategoryID int OUTPUT
AS
DECLARE @CurrID int
IF @CurrID IS NULL
BEGIN
INSERT
INTO CT_Category
(CategoryName, CategoryDescription, topcategory, parentcategoryid, topcategoryid)
VALUES
(@Name, @Description, @topcategory, @ParentCategoryID, @TopCategoryID)
SET @CategoryID = @@IDENTITY
IF @@ERROR > 0
BEGIN
RAISERROR ('Insert of Category failed', 16, 1)
RETURN 99
END
END
ELSE
BEGIN
SET @CategoryID = -1
END
GO
Thanks in advance
Returning @@IDENTITY FROM Stored Proc
Nov 15, 2005I am trying to get the identity of an inserted record using this SP:
<code>
ALTER PROCEDURE acereal_Admin.AuctionInsertCommand
(
@AuctionID Int OUTPUT,
@StartDate char(255),
@StartTime char(255),
@Location char(255),
@Title char(255),
@Description char(255),
@Images char(255)
)
AS
INSERT INTO Auctions
(
StartDate,
StartTime,
Location,
Title,
Description,
Images
)
VALUES
(
@StartDate,
@StartTime,
@Location,
@Title,
@Description,
@Images
)
SELECT AuctionID AS ID
FROM Auctions
WHERE (AuctionID = @@IDENTITY)
</code>
Then, I am using this class for a file called dataaccess.cs to return the ID:
<code>
public string SaveImageName(string ImageName, string AuctionID)
{
SqlConnection
sqlConnection = new
SqlConnection(ConfigurationSettings.AppSettings["ConnectionString"]);
this.newSqlCommand = new
System.Data.SqlClient.SqlCommand("[AuctionImageSave]", sqlConnection);
this.newSqlCommand.CommandType =
System.Data.CommandType.StoredProcedure;
SqlParameter
paramImagePath = new System.Data.SqlClient.SqlParameter("@ImagePath",
System.Data.SqlDbType.Char, 255);
paramImagePath.Value = ImageName;
this.newSqlCommand.Parameters.Add(paramImagePath);
SqlParameter
paramAuctionID = new System.Data.SqlClient.SqlParameter("@AuctionID",
System.Data.SqlDbType.Int, 4);
paramAuctionID.Value = AuctionID;
this.newSqlCommand.Parameters.Add(paramAuctionID);
SqlParameter
paramImageID = new System.Data.SqlClient.SqlParameter("@ImageID",
System.Data.SqlDbType.Int, 4);
paramImageID.Direction = ParameterDirection.Output;
this.newSqlCommand.Parameters.Add(paramImageID);
//Return SqlDataReader Struct
this.newSqlCommand.Connection.Open();
this.newSqlCommand.ExecuteNonQuery();
this.newSqlCommand.Connection.Close();
int returnID = (int)paramImageID.Value;
return returnID.ToString();
}
</code>
The above code returns null.
Can anyone tell me what I am doing wrong?
THanks, Justin.
Return Identity In Stored Procedure
Mar 23, 1999I have a stored procedure where I am passing in several strings which are concatenated to form an Insert SQL statement. I then return the identity value from the insert - problem is, the identity value is coming back NULL.
Here is the sp. Any ideas?
CREATE PROCEDURE sp_ExecuteInsert
@pIdentity int OUTPUT,
@pSQL1 varchar(255),
@pSQL2 varchar(255) = NULL,
@pSQL3 varchar(255) = NULL,
@pSQL4 varchar(255) = NULL,
@pSQL5 varchar(255) = NULL,
@pSQL6 varchar(255) = NULL,
@pSQL7 varchar(255) = NULL,
@pSQL8 varchar(255) = NULL
AS
EXECUTE (@pSQL1 + @pSQL2 + @pSQL3 + @pSQL4 + @pSQL5 + @pSQL6 + @pSQL7 + @pSQL8)
SELECT @pIdentity = @@IDENTITY
GO
FYI, the real problem I am trying to solve is simply to return the identity after an insert. I could write a simple insert sp that returns the identity, but my code is written to handle generic situations and build an INSERT statement as needed. So if there are any other ideas of executing an insert statement and getting the identity, please let me know.
Thanks...
Stored Procedure Conditionally Using @@Identity
Feb 21, 2006Im having a play using @@identity
I want to insert some data into a table
Get the AutoID value on the inserted data
then insert some other data into another table
and set its id value to the captured @@identity
My question
I only want to do the second insert only if
@FieldValue2 contains a value ie not empty
below is a basic procedure without conditonal part
Code:
CREATE PROCEDURE conditional_Insert
@FieldID As int,
@FieldValue As Nvarchar(50),
@FieldValue2 As Nvarchar(50)
AS
declare @id int
set nocount on
INSERT INTO Table1(fieldID,fieldvalue)
VALUES( @FieldID, @FieldValue)
set @id = @@identity
INSERT INTO Table2(fieldID2, FieldValue2)
VALUES(@id, @FieldValue2)
select @id
GO
IDENTITY Values In A Stored Procedure
Oct 18, 2005Hi All,
This is my stored procedure
CREATE PROCEDURE testProc AS
BEGIN
CREATE TABLE #tblTest(ID INT NOT NULL IDENTITY, Col1 INT)
INSERT INTO #tblTest(Col1)
SELECT colA FROM tableA ORDER BY colA
END
This is my simple procedure, I wanted to know whether the IDENTITY values created in #tblTest will always be consistent, I mean without losing any number in between. i.e. ID column will have values 1,2,3,4,5.....
or is there any chance of ID column having values like 1,2, 4, 6,7,8....
Please reply...
qa
SCOPE IDENTITY Using SqlDataSource WITHOUT Stored Proc
Oct 27, 2006Ok, So I am trying to do 1 insert into a table and then insert more information into another table but I need to get the [TKTNUM] (the column with the idenity increment on it) value that was auto-generated when the insert was done. I have done a search and I am well aware that this are tons of posts on this subject already that is how I found out to use the SCOPE IDENTITY(). But nobody is using the insert syntax that I am using and since I am new, I don't understand any of it. I think they are using ADO.NET. I am extremely new to ASP.NET so take it easy on me ok guys... But can someone take a look at my code and tell me what the problem is. Again, I'm new so I am learning as I go so I might be missing something really stupid. Any help would be greatly appreciated. O yeah, I am running this code in a button click event NOT in a stored procedure (dont really know now to use those anyway).Here is my code:Protected Sub submitBtn_Click(ByVal sender As Object, ByVal e As System.EventArgs)Dim newTktNumIf Page.IsValid ThenDim it3Conn As SqlDataSource = New SqlDataSource()it3Conn.ConnectionString = ConfigurationManager.ConnectionStrings("ConnectionString1").ToStringit3Conn.InsertCommand = "INSERT INTO [IT_TICKET] ([REQUEST_DATE], [LOGGED_BY], [REQUESTED_BY], [TKTSTATUS],[NEEDED_DATE]) VALUES (@REQUEST_DATE, @LOGGED_BY, @REQUESTED_BY, @TKTSTATUS,@NEEDED_DATE); SELECT @newTktNum = SCOPE_IDENTITY()"it3Conn.InsertParameters.Add("REQUEST_DATE", DateTime.Now.ToString)it3Conn.InsertParameters.Add("LOGGED_BY", User.Identity.Name)it3Conn.InsertParameters.Add("REQUESTED_BY", User.Identity.Name)it3Conn.InsertParameters.Add("TKTSTATUS", "NEW")it3Conn.InsertParameters.Add("NEEDED_DATE", needByTB.Text.ToString)it3Conn.Insert()End IfMsgBox("Ticket Number: " & newTktNum & " has been created", MsgBoxStyle.OkOnly, "Ticket Created")End Sub
View 2 Replies View RelatedRetreive @@Identity From Stored Proc Call
May 3, 2007Hi all, I've been struggling with this one for a while, but am still doing something wrong: I have three tables which need to be updated. I have a stored proc which accomplishes the first writes the data in for the first 2 tables. The last table is a one to many, so needs a seperate stored proc which will be called multiple times depending on the number of items in the order. My only question I am trying to get to here is: How do I get the first stored proc to return me the primary key value from the 1st insert (NOT the second)? I've tried a few different methods: the current one shown below returns me "2", as in the number of inserts performed. Dim InsertCmd As New SqlCommand("WriteOrder", oSQLConn)
InsertCmd.CommandType = CommandType.StoredProcedure
InsertCmd.Parameters.AddWithValue("@CartTotal", Session("CartTotal"))
InsertCmd.Parameters.AddWithValue("@CARDFNAME", BillingInfo("CARDFNAME"))
InsertCmd.Parameters.AddWithValue("@CARDLNAME", BillingInfo("CARDLNAME"))
...
InsertCmd.Parameters.AddWithValue("@CONTACTEMAIL", BillingInfo("CONTACTEMAIL"))
InsertCmd.Parameters.AddWithValue("@COMPANYMATCH", 0)
InsertCmd.Parameters.AddWithValue("@RECNUM", 0)
Response.Write("---" & InsertCmd.ExecuteNonQuery().ToString() & "---")
---------------------STORED PROC---------------------
ALTER PROCEDURE [dbo].[WriteOrder]
@CartTotal float,
@CARDFNAME varchar(30),
...
@CONTACTEMAIL varchar(100),
@COMPANYMATCH bit,
@RecNum int = 0 OUTPUT
AS
INSERT INTO [dbo].[ORDER]
([OrderDate], [OrderTotal], [CARDFIRSTNAME], [CARDLASTNAME], [BILLINGADDR1], [BILLINGADDR2], [BILLINGADDR3], [BILLINGCITY], [BILLINGSTATE], [BILLINGPOSTALCODE], [BILLINGCOUNTRY], [BILLINGPHONE], [BILLINGEMAIL], [CCTYPE], [ACCOUNTNUMBER], [CARDEXPIREMONTH], [CARDEXPIREYEAR], [CVV2], [TransactionID], [TransDateStamp], [ProcessorAuthCode])
VALUES
(GetDate() ,@CartTotal , @CARDFNAME, @CARDLNAME, @BILLINGADDRESS1, @BILLINGADDRESS2, @BILLINGADDRESS3, @BILLINGCITY, @BILLINGSTATE, @BILLINGPOSTALCODE, @BILLINGCOUNTRY, @BILLINGPHONE, @BILLINGEMAIL, @CCTYPE, @ACCOUNTNUMBER, @EXPIRATIONMONTH, @EXPIRATIONYEAR, @CVV2,@TransactionID, @TransDateStamp,@ProcessorAuthCode)
SET @RecNum = @@IDENTITY
INSERT INTO [dbo].[CONTACT]
([ORDERID], [CONTACTFNAME], [CONTACTLNAME], [CONTACTADDRESS1], [CONTACTADDRESS2], [CONTACTADDRESS3],
[CONTACTCITY], [CONTACTSTATE], [CONTACTPOSTALCODE], [CONTACTCOUNTRY], [CONTACTPHONE], [CONTACTEMAIL], [COMPANYMATCH])
VALUES
(@@IDENTITY , @CONTACTFNAME, @CONTACTLNAME, @CONTACTADDRESS1, @CONTACTADDRESS2, @CONTACTADDRESS3, @CONTACTCITY, @CONTACTSTATE, @CONTACTPOSTALCODE, @CONTACTCOUNTRY, @CONTACTPHONE, @CONTACTEMAIL, @COMPANYMATCH)
RETURN @RecNum
GO
I've also tried returning parameters like this, with no luck: InsertCmd.Parameters(32).SqlDbType = SqlDbType.Int InsertCmd.Parameters(32).Direction = ParameterDirection.ReturnValue Response.Write("---" & InsertCmd.Parameters(32).Value() & "---")Any help is greatly appreciated!
Any Resources About Stored Procedures && Scope Identity?
Jun 16, 2007i am a beginner looking for such resources, MSDN is one but can be a little difficult to understand
View 3 Replies View RelatedSql Stored Procedure - With In Cursor Get @@identity Value For Insert And Use That Again
Jun 11, 2008I have stored procedure which contains follwing part of it. it says syntax when i worte line to get @@identity valuewhen delete that line command succesful. but i need to get @@identity from the insert statement and assign it to a variable and use it after
any body pls tell me how to get this within a stored prosedure or what is the error of the following code bit. (#tblSalesOrders is a temporary table which containsset of records from orginal table )DECLARE @soNo1 INT
DECLARE @CursorOrders CURSOR
SET @CursorOrders = CURSOR FAST_FORWARD FOR
select fldSoNo from #tblSalesOrders
declare @newSONO1 int OPEN @CursorOrders
FETCH NEXT FROM @CursorOrders INTO @soNo1
WHILE @@FETCH_STATUS = 0
BEGIN
----for each salesorder insert to salesorderline
insert into tblSalesOrders (fldWebAccountNo,fldDescription,fldSoDate,fldGenStatus) select (fldWebAccountNo,fldDescription,fldSoDate,fldGenStatus) from #tblSalesOrders where fldSoNo =@soNo1;
set @newSONO1=SCOPE_IDENTITY;
-------in this section again create another cursor for another set of records and insert to a table passing identity value return from the above insert --------------------------
SELECT @intErrorCode = @@ERRORIF (@intErrorCode <> 0) GOTO PROBLEM
FETCH NEXT FROM @CursorOrders INTO @soNo1
END CLOSE @CursorOrders
DEALLOCATE @CursorOrders
Identity Column Set Not For Replication And A Stored Procedure
Feb 2, 2015I have a table, which is being replicated with the identity column set "not for replication" and a stored procedure, which is also replicated (execution) which inserts into this table. When the execution of the stored procedure happens, the replication monitor complains about identity value not being provided.other than removing the stored procedure from replication?
View 0 Replies View RelatedProblem With @@identity Return In Stored Procedure Insert.
Nov 24, 2003I'm having a problem I do an insert into a table but I want to return the value of the identity field of that insert so I can email a confirmation. For some reason this code doesn't work.
Below is the stored procedure I'm calling and below that the code I'm using. What am I doing wrong. The value I have returned is null when it should be a number. Any suggestions. Why does finalMagicNum2 come back null when it should grab the identity field of the inserted record.
CREATE PROCEDURE addMagicRecTest
(
@theSequence int,
@theSubject int,
@theFirstName nvarchar(50)=null
@theLastName nvarchar(75)=null
)
AS
INSERT INTO employees([Sequence],subject,firstname,lastname)
VALUES(@theSequence,@theSubject,@theFirstName,@theLastName)
SELECT @@identity AS finalNum
magicDataConnect = ConfigurationSettings.AppSettings("myDataConnect")
Response.Write(magicDataConnect)
magicCommand = New SqlDataAdapter("addMagicRecTest", magicDataConnect)
magicCommand.ConnectionType = CommandType.StoredProcedure
magicCommand.SelectCommand.CommandType = CommandType.StoredProcedure
' Sequence ID for request
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theSequence", SqlDbType.NVarChar, 8))
magicCommand.SelectCommand.Parameters("@theSequence").Value = "41833"
' Subject for new Wac Ticket
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theSubject", SqlDbType.NVarChar, 8))
magicCommand.SelectCommand.Parameters("@theSubject").Value = "1064"
' First Name Field
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theFirstName", SqlDbType.NVarChar, 50))
magicCommand.SelectCommand.Parameters("@theFirstName").Value = orderFirstName
' Last Name Field
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theLastName", SqlDbType.NVarChar, 75))
magicCommand.SelectCommand.Parameters("@theLastName").Value = orderLastName
DSMagic = new DataSet()
magicCommand.Fill(DSMagic,"employees")
If DSMagic.Tables("_smdba_._telmaste_").Rows.Count > 0 Then
finalMagicNum2 = DSMagic.Tables("_smdba_._telmaste_").Rows(0)("finalMagic").toString
End If
I need finalMagicNum2
How Do I Return The Identity From Stored Procedure To Asp.net Code Behind Page?
Jun 2, 2006how do i return the identity from stored procedure to asp.net code behind page?
CREATE PROCEDURE [dbo].[myInsert] ( @Name varchar(35), @LastIdentityNumber int output)AS insert into table1 (name) values (@name)
DECLARE @IdentityNumber intSET @IdentityNumber = SCOPE_IDENTITY()SELECT @IdentityNumber as LastIdentityNumber
code behind:
public void _Insert(
string _Name,
{
DbCommand dbCommand = db.GetStoredProcCommand("name_Insert");db.AddInParameter(dbCommand, "name", DbType.String, _userId);
db.AddParameter(dbCommand, "@IdentityNumber", DbType.Int32, ParameterDirection.Output, "", DataRowVersion.Current, null);
db.ExecuteNonQuery(dbCommand);
int a = (int)db.GetParameterValue(dbCommand,"@IdentityNumber");
whats wrong with to the above code?
@@Identity Being Over-written By Insert Trigger In Stored Procedure.
Oct 6, 2004Hi All
I have a problem with an existing stored procedure that is used to insert a new entry to a table (using an Insert statement).
I have been using the @@Identity global variable to return the identity column (id column) back to the calling routine. This has worked fine for years until recently an ‘after insert Trigger’ has been added to the table being updated.
Now the @@Identity is returning the identity value of the trigger that was called instead of the original table insert.
Does anyone know how I can code around this issue (without using a select statement within my stored proc, as these have been known to cause locks in the past).
Thank in advance.
Eamon.
Problem With Stored Procedure And Retrieving Inserted Identity Value
Jul 11, 2006Hello!I use a procedure to insert a new row into a table with an identitycolumn. The procedure has an output parameter which gives me theinserted identity value. This worked well for a long time. Now theidentity value is over 700.000 and I get errors whiles retrieving theinserted identitiy value. If I delete rows and reset the identityeverything works well again. So I think it is a data type problem.My Procedure:create procedure InsertProduct@NEWID int outputasbeginset nocount oninsert into PRODUCT(D_CREATED)values(getdate()+'')set nocount offselect @NEWID = @@IDENTITYendMy C# code:SqlCommand comm = new SqlCommand("InsertProduct", sqlCon);comm.CommandType = CommandType.StoredProcedure;comm.Parameters.Add(new SqlParameter("@NEWID",System.Data.SqlDbType.Int)).Direction =System.Data.ParameterDirection.Output;try{SqlDataReader sqlRead = comm.ExecuteReader();object o = comm.Parameters["@NEWID"].Value;//...}catch ( Exception ex ){throw ex;}The object o is alwaya System.DbNull. I also tried to use bigint.Any hints are welcomeCiaoSusanne
View 3 Replies View RelatedCode Inside! --&> How To Return The @@identity Parameter Without Using Stored Procedures
Oct 30, 2005Hi.here is my code with my problem described in the syntax.I am using asp.net 1.1 and VB.NETThanks in advance for your help.I am still a beginner and I know that your time is precious. I would really appreciate it if you could "fill" my example function with the right code that returns the new ID of the newly inserted row.
Public Function howToReturnID(ByVal aCompany As String, ByVal aName As String) As Integer
'that is the variable for the new id.Dim intNewID As Integer
Dim strSQL As String = "INSERT INTO tblAnfragen(aCompany, aName)" & _ "VALUES (@aCompany, @aName); SELECT @NewID = @@identity"
Dim dbConnection As SqlConnection = New SqlConnection(connectionString)Dim dbCommand As SqlCommand = New SqlCommand()dbCommand.CommandText = strSQL
'Here is my problem.'What do I have to do in order to add the parameter @NewID and'how do I read and return the value of @NewID within that function howToReturnID'any help is greatly appreciated!'I cannot use SPs in this application - have to do it this way! :-(
dbCommand.Parameters.Add("@aFirma", aCompany.Trim)dbCommand.Parameters.Add("@aAnsprAnrede", aName.Trim)
dbCommand.Connection = dbConnection
TrydbConnection.Open()dbCommand.ExecuteNonQuery()
'here i want to return the new ID!Return intNewID
Catch ex As Exception
Throw New System.Exception("Error: " & ex.Message.ToString())
Finally
dbCommand.Dispose()dbConnection.Close()dbConnection.Dispose()
End Try
End Function
Replicating Tables With An Identity Column Fails Even With Custom Stored Procedure
Mar 28, 1999When replicating a table which has an identity column I get the error: "Procedure cp_insert_tblname expects parameter @C1, which was not supplied.". The stored procedure appears to be called without any parameters so my insert stored procedure does not work. I know I'm missing something basic here!! Do I have to add the field names when telling replication to use a custom stored procedure. If not, how do arguments get passed to my SP, as globals somehow?
Any info greatly appreciated!!
Thanks,
Jay
Last GASP On Insert Row In Table With Identity Field, And Get New Identity Back ?
Jul 9, 2006While I have learned a lot from this thread I am still basically confused about the issues involved.
.I wanted to INSERT a record in a parent table, get the Identity back and use it in a child table. Seems simple.
To my knowledge, mine would be the only process running that would update these tables. I was told that there is no guarantee, because the OLEDB provider could write the second destination row before the first, that the proper parent-child relationship would be generated as expected. It was recommended that I create my own variable in memory to hold the Identity value and use that in my SSIS package.
1. A simple example SSIS .dts example illustrating the approach of using a variable for identity would be helpful.
2. Suppose I actually had two processes updating these tables, running at the same time. Then it seems the "variable" method will also have its problems. Is there a final solution other than locking the tables involved prior to updating them or doing something crazy like using a GUID for the primary key!
3. We have done the type of parent-child inserts I originally described from t-sql for years without any apparent problems. (Maybe we were just lucky.) Is the entire issue simply a t-sql one or does SSIS add a layer of complexity beyond t-sql that needs to be addressed?
TIA,
Barkingdog
Insert Row In Table With Identity Field, And Get New Identity Back
Jun 30, 2006I want to insert a new record into a table with an Identity field and return the new Identify field value back to the data stream (for later insertion as a foreign key in another table).
What is the most direct way to do this in SSIS?
TIA,
barkingdog
P.S. Or should I pass the identity value back in a variable and not make it part of the data stream?
T-SQL (SS2K8) :: How To Update Identity Column With Identity Value
Jan 25, 2015I have table of three column first column is an ID column. However at creation of the table i have not set this column to auto increment. Then i have copied 50 rows in another table to this table then set the ID column values to zero.
Now I have changed the ID column to auto increment seed=1 increment=1 but the problem is i couldn't figure out how to update this ID column with zero value set to each row with this auto increment values so the ID column would have values from 1-50. Is there a away to do this?
Identity...I Need To Get The Last (or Highest Number In Identity Column)...
Sep 19, 2005Ok,I just need to know how to get the last record inserted by the highestIDENTITY number. Even if the computer was rebooted and it was twoweeks ago. (Does not have to do with the session).Any help is appreciated.Thanks,Trint
View 2 Replies View RelatedProblem In Using Sqlbulkcopy To Insert Data From Datatable(no Identity Column) Into Sql Server Table Having Identity Column
Jun 19, 2008Hi,
I am having problem in bulk update of a sql server table haning identity column from a datatable( has no identity column) using sqlbulkcopy. I tried several approaches, but it does not show any error nor is the table getting updated. But the identity value seems to getting increased every time.
thanks.
varun
How To Use Identity On Non-identity Column (with Concurrence)
Aug 1, 2014I'm working with a third-party database (SQL Server 2005) and the problem here is the following:
- There are a bunch of ETL processes that needs to insert rows on a table (let's call this table T) and at the same time, an ERP (owner of T) is up and running (reading, updating and inserting on T).
- The PK of T is an Integer.
Today all ETL processes uses (select max(ID) + 1 from T) to insert new rows, so just picture the scenario. It is a mess! Everyday they get duplicate key error when 2 or more concurrent processes are trying to insert a row (with the max) at the same time.
Considering that I can't change the PK, what is the best approach to solve this problem?
To sum up:
* I need to have processes in parallel inserting on T
* I can't change anything on T
* The PK is NOT an Identity
Transact SQL :: Alter Non Identity Column To Identity Column
Aug 12, 2009when i alter non identity column to identity column using this Query alter table testid alter column test int identity(1,1) then i got this error message Msg 156, Level 15, State 1, Line 3 Incorrect syntax near the keyword 'identity'.
View 2 Replies View Related@@identity
Oct 26, 2006i have found loads of topics on this but have yet to find one that gives the answer i need.I want to display the last insert id into a label/textbox after the INSERT functionhow do i do this?
View 18 Replies View Related@@identity
Feb 29, 2008I got two tables
one table has the fields ie table1
orderid ofd orderdate customername
where order id is autonumber
the other table2
orderid ofd product id productname
the problem here is thatif customer purchases 3 product at a time all the 3 products get the same ofd number ........and any 2 customers can have the same ofd number................ now i have to pull the order ID value from table 1 to table 2............ can somebody help with this i am the front end is asp.net amd the database is done on SQL server management studio
@@IDENTITY
Mar 3, 2008Hi, I was looking through this thread about @@Identity: http://forums.asp.net/p/1039145/1443971.aspx#1443971 I'm still unsure how to ue it. I have an Orders table, a Products table and a Products_Orders table. When I add an order to the Orders table I want the PK OrderID in this table to also update the FK OrderID in my Products_Orders table. I'm using SQL EXP05 and I'm in C#.
View 1 Replies View Related