I'm assuming that in one of the MSDB tables I can find transaction log information (current size, amount of space used.. blah blah).. but I can't seem to figure out which one.. any help is appreciated.. SQL 7.0
Travis
I have a client who is logging diagnostic information in the midst of lengthy, nested transactions, and finds that the log informaiton disappears when the outer transaction is rolled back. What he wants to do is essentially defeat the transaction, and get records added to a table from within a transaction that don't participate in the transaction.
I've thought about using an Extended Stored Proc, or an RPC with SET_REMOTE_PROC_TRANSACTIONS set to "OFF", or trying to create a linked server and defeat the distributed transaction system, but before I set out building and testing I'd like to ask the experts how to purposefully get data out of a transaction.
Yes, there are work-arounds possible within the T_SQL Procs, we've talked about loading the debug information into a table var which is passed around until all the transactions are cleared and then is logged, but he doesn't hant to go back and revise hundreds of procs. We're hoping to adjust the single logging function to make a "transaction-proof" INSERT.
Any ideas?
GA Dean
I have a report and it retrieves information from an etl logging table which contains this info: etl_process_name, active_since_date, last_run_date.
When the packages are executing, the table cant be queried because it is in a transaction. Therefore the report keeps generating :s
The thing I want is that: If I query that table (with the report to show the logging table information) and the packages are executing, I want to see the values of the table before the transaction.
What I tried:
From sql management studio:
ALTER DATABASE MyDataBase
SET ALLOW_SNAPSHOT_ISOLATION ON
set transaction isolation level snapshot
go
SELECT etl_process, last_run, active_since FROM config.etl_settings
I did this while the packages were executing and it works but it won't work when I execute the same SELECT statement from the Dataset in the report. How is that possible? Does it have something to do with setting the database options for all users?
Additional info:
I'm database owner
The report solution has a shared datasource which refers to the same database
Hi,
I have one database configured with the Recovery Model "Simple".
I am getting alot of full transaction log messages... is this supposed to happen?
Another question is:
Imagine i am in a middle of a big select into statement... and in another query i run the backup truncate log... am i going to loose information on the other batch ("select into?")??
Kind Regards,
Luis Simões
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
Hello,
I have some troubles with IBM WebSphere Application Server using MS SQL Server 2005 JDBC Driver. I always get the error e.g.
java.lang.SecurityException: class "com.microsoft.sqlserver.jdbc.SQLServerDatabaseMetaData"'s signer information does not match signer information of other classes in the same package
I found this Feedback but it seems to be closed.
A temporary solution for me was to delete the meta-inf directory of the JAR-File, but that can't be the solution.
Can anyone help me with this problem?
Simon
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
View 8 Replies View Related
I want to list out the pending transaction for transaction replication by publication.
Help needed.
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.
you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]
Hi
How do I make use of begin transaction and commit transaction in SSIS.
As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:
Hresult:0x80004005
descriptionyntax error or access violation.
its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.
Thanks,
Prashant
Error returned when trying to commit the transaction to a database that is a replication distributor. (sql2005 ctp16)
View 10 Replies View Related
Hi,
I am having some problem with SSIS transaction. Eventhought I tried to imitate the concept that Jamie presented at http://www.sqlservercentral.com/columnists/jthomson/transactionsinsqlserver2005integrationservices.asp
. My workflow is as followed
*********************************
For Each ADO.Record in Oracle (transaction=not supported)
If (Certain_Field_Value = 'A')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence A (Start a Transaction , transaction=required)
INSERT/UPDATE some records in SQLDB(transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'B')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence B (Start a Transaction , transaction = required)
INSERT/UPDATE some records in SQLDB (transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'C')
------------
------------
End ForEach Loop
*************************************
My requirements are that I want separate transaction for each Sequence A, B, C, etc... If Sequence A transaction fails, the other should still be continuing with another transaction.
But I am getting an error regarding the OLEDB Error in next Task (e.g in Certain_Field_Value = 'B') "Lookup Data in SQL DB with values from Oracle ", the error message is ".......Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. ".
What is it that I am doing wrong?
Regards
KyawAM
I'm getting this error:
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
http://support.microsoft.com/kb/839279 this didn't help
any suggestions?
I am executing a stored procedure something like this
Create Procedure TEST
@test1
@test2
AS
BeGIN TRANSACTION ONE
SELECT...
UPDATE..
....
....
....
TRUNCATE
etc and lot of Select,update and delete statements like this
.....
COMMIT TRANSACTION ONE
The Block of code which I have b/w BEGIN TRANSACTION AND COMMIT TRANSACTION ..Will it be rolled back
if it encounters any errors in the SELECT,UPPDATE,DELETE ..statements which I have with the transaction one.
IF not How do I roll back if it encounters any erros b/w the BEGIN TRANSACTION and END TRANSACTION.
Thanks
micky
Hi all,
In my ASP application, I've been using this code:
----------------------------------------------
dim conn, connectionstring
connectionstring= "Provider=SQLOLEDB.1; Data Source = blahblah; Initial Catalog = abc; User Id = osss; Password=xxx"
set conn = server.CreateObject("adodb.connection")
conn.open connectionstring
----------------------------------------------
It's just basically to set up the connection to the SQL server, it works on my other pages, but on a few pages, the last line (conn.open connectionstring) triggers this error:
"Microsoft OLE DB Provider for SQL Server error '8004d00a'
New transaction cannot enlist in the specified transaction coordinator. "
I've never encountered this error before and I couldn't think of any solution... please help!!!
Thanks so much,
Annie
I had thought that if any statement failed within a BEING TRANS .. COMMIT TRANS block, then all the statements would be rolled back. But I am seeing different behavior (SQL Server 2000 8.00.2039)
For instance, run these statements to set up a test:
--DROP TABLE testTable1
--DROP TABLE testTable2
CREATE TABLE testTable1 (f1 varchar(1))
CREATE TABLE testTable2 (f1 varchar(1))
CREATE UNIQUE INDEX idx_tmptmp ON testTable1 (f1)
insert into testTable1(f1) values ('a')
So table testTable1 has a unique index on it..
Now try to run these statements:
--DELETE FROM testTable2
BEGIN TRANSACTION
insert into testTable1(f1) values ('a')
insert into testTable2(f1) values ('a')
COMMIT TRANSACTION
SELECT * FROM testTable2
..the first insert fails on the unique index.. but the second insert succeeds. Shouldn't the second insert roll back? How can I make two operations atomic?
Hi,On My local SQL server I have added a linked server to another SQLserver (remoteserver) in another Windows NT Domain.When I run this codeselect count(*) from remoteserver.mosaics.dbo.LocationThis works fine.However when I usebegin transactionselect count(*) from remoteserver.mosaics.dbo.LocationIt errors out saying thatThe operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.New transaction cannot enlist in the specified transactioncoordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].My question is even though I am just reading data from theremoteserver, why does the local transaction get promoted to adistributed transaction.Any help will be grately appreciated.TIA...Rohit
View 2 Replies View RelatedHi
I am trying transfer data from Back Office Server to Head Office using DTS. It is failing in few stores, rest of the store it is OK
Configuration
Head office :Windows 2003 SP1 and Sql Server 2000 SP3
Failing Store:Windows 2003 SP2 and SQL SERVER 2005
Successful Store :Windows 2003 SP2 qnd SQL SERVER 2000
At Store: Setting for MSDTC
Log on Account for MSDTC Service : Network Service
Network DTC Access = True
Allow Inbound = True
Allow Outbound = True
No Authentication Required = True
TurnOffRPCSecurity = 1
port Ranges for RPC = 5000- 5100
The error Message is as follows:
(Microsoft Data Transformation Services (DTS) Package (8004d00a): Connection 'Head Office SQL Server' for Task 'DTSTask_DTSDataPumpTask_1' does not support joining distributed transactions or failed when attempting to join. Unable to enlist in the transaction.
) (Microsoft OLE DB Provider for SQL Server (8004d00a): New transaction cannot enlist in the specified transaction coordinator. )
If any one can help me, that will be great!!! Thanks in advance
Shiny
I have a job that runs each night that deletes all records from a table that are older than two weeks old. Is there some way I can view how many records were deleted from the table each night. Is it written to a log somewhere? Thanks in advance!
View 1 Replies View RelatedHi all,
This is my first thread here.
I got an information about
SET NO_BROWSETABLE ON/OFF
in your forum.. The replier told that this is an undocumented option.
My question is how you guys find information on such undocumented things....
Thanks in advance.
Saint
Hello,
Can anyone clarify the nuances of How to deal with the change management environment in SQL Server.
Thanks.
I am trying to get job information and have a query set up. However, I would also like to get the owner information. However, the job only stores the sid of the owner. Does anybody know how I could change this query to get the owner name instead of sid? Don't want to use the sp_help_job command.
SELECT @@SERVERNAME AS Server, msdb.dbo.sysjobs.job_id, msdb.dbo.sysjobs.name, msdb.dbo.sysjobs.enabled AS Job_Enabled,
msdb.dbo.sysjobs.description, msdb.dbo.sysjobs.notify_level_eventlog, msdb.dbo.sysjobs.notify_level_email,
msdb.dbo.sysjobs.notify_level_netsend, msdb.dbo.sysjobs.notify_level_page, msdb.dbo.sysjobs.notify_email_operator_id,
msdb.dbo.sysjobs.date_created, msdb.dbo.syscategories.name AS Category_Name, msdb.dbo.sysjobschedules.next_run_date,
msdb.dbo.sysjobschedules.next_run_time, msdb.dbo.sysjobservers.last_run_outcome, msdb.dbo.sysjobservers.last_outcome_message,
msdb.dbo.sysjobservers.last_run_date, msdb.dbo.sysjobservers.last_run_time, msdb.dbo.sysjobservers.last_run_duration,
msdb.dbo.sysoperators.name AS Notify_Operator, msdb.dbo.sysoperators.email_address, msdb.dbo.sysjobs.date_modified, GETDATE()
AS Package_run_date
FROM msdb.dbo.sysjobs INNER JOIN
msdb.dbo.syscategories ON msdb.dbo.sysjobs.category_id = msdb.dbo.syscategories.category_id LEFT OUTER JOIN
msdb.dbo.sysoperators ON msdb.dbo.sysjobs.notify_email_operator_id = msdb.dbo.sysoperators.id LEFT OUTER JOIN
msdb.dbo.sysjobservers ON msdb.dbo.sysjobs.job_id = msdb.dbo.sysjobservers.job_id LEFT OUTER JOIN
msdb.dbo.sysjobschedules ON msdb.dbo.sysjobschedules.job_id = msdb.dbo.sysjobs.job_id
I have a report where the information is getting cut off the report.
At the beginning of or at the ending of the page it is dropping the information.
My layout setting are set 8.5in wide by 11in height. .5in for either left or right margin. 1in for top and bottom.
I run the report and I'm missing a record.
I adjust the height to 10in to force diffferent page breaks and it's there.
I have the setting in one of the groups set for a page break at end. If I uncheck that it doesn't help.Still no records.
What is going on?
I'm looking for books or information on command line configuration of settings for things like activating Remote Connections under the Service Area Configuration and setting a port for that connection.
What books would be good to get or where can I download papers on this?
Any help would be appreciated.
With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False
'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i
' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
Hi!This is a very simple question and I'm sure you guys will help me a lot.I'm using Visual Basic 2005 for programming. I have one table on my MS SQL 2005 database that has an int column with a counter that needs to be incremented when a user registers.So when reading the value I use a simple SQL query like this:
SELECT counter FROM companies WHERE company=0
then I store the value in a local int variable and then I increment it. Then I update the incremented value.
UPDATE companies ...
I need every single customer to have an individual value. My question is how can I prevent an error, data corruption or whatever if two or more users want to register at the same time? I've been reading about lock update but I'm not sure how to implement it on Visual Basic 2005 and I don't want to store scripts on SQL Server.
I'll appreciate your comments and help on this situation.
Hi,
I have a problem here in my SQL Server Database. I want to find which trigger is working backend affecting my table input. Since the original author of this trigger was somebody else, I am not able to find the trigger information
A simple line of syntax would be great.
Thanks in advance
sandeep
I am doing an audit of user information in our database and was wondering if there is a way for me to see the last time a user logged into the database. I am using a SQL Server 7.0 box. Any Information would be greatly appreciated. Thanks!
View 1 Replies View Related