Where To Find Detailed Error Report When Setting Up Mirroring Fails
Dec 14, 2006
I had a problem with mirroring that I only was able to resolve when I attempted to replicate instead. Replication gave me an error message that expained the problem; mirroring simply failed.
Is there any place where mirroring logs the details of what it is doing & why it is failing?
BTW, the problem was that the server name was changed after SQL was installed. Although i knew this, the forums indicated taht SQL 2005 automatically picks up the new name after it is restarted. This apparently is not true...
Thanks
Dave S
View 2 Replies
ADVERTISEMENT
May 28, 2007
hi guys , does anyone of you have a good solution on the Error 1413: Communications to the remote server instance failed before database mirroring was fully started issue?
Best Regards,
Hans
View 1 Replies
View Related
May 24, 2006
I attempted to setup database mirroring using a High Availability scenario but when I installed SQL is chose to use local system accounts for all the services. Consequently, I stubled upon a microsoft article explaining how to setup mirroring using local system accounts and certificate authentication but I am stil not able to get it to work. When I try ti initiate the mirror from the mirror server I receive an error stating "Neither the partner nor the witness server instance for database "EDENLive" is available. Reissue the command when at least one of the instances becomes available." I have checked all the endpoints and everything seems to be in order. I even checked to make sure that each server was listening on the appropriate ports and I AM able to telnet to the ports. Please help!
View 1 Replies
View Related
Sep 15, 2015
I need to set up asyncronous data replication across two clustered instances of SQL 2012 across 2 Datacenters. Both the datacenters have a common domain however the vlans are different. There are only 3 small databases on the primary instance.
any issue in setting up mirroring in this case as vlans are different.
Operating system is Windows 2012.
View 2 Replies
View Related
Apr 25, 2007
I receive the following error when I try to save a subscription after configuring it. I appreciate any insight that anyone has.
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
The EXECUTE permission was denied on the object 'sp_add_category', database 'msdb', schema 'dbo'.
View 9 Replies
View Related
May 25, 2006
The best I can get out of my detail log is this which is no help. How do I find out what really happened. My windows app log is no help either
Date 5/24/2006 9:51:41 PM
Log Job History (DTS_xx)
Step ID 1
Server xx
Job Name DTS_xx
Step Name DTS_xx
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: xxadministrator. The package execution failed. The step failed.
View 3 Replies
View Related
Aug 9, 2006
Hello,
Is there a way to get detailed error information in an e-mail?
Thanks,
Michael
View 2 Replies
View Related
Jan 15, 2008
Hello,
How can I find the cause on the error that marked one conversation with status 'ER' in sys.conversation_endpoints?
Thanks in advance.
View 1 Replies
View Related
Jun 21, 2007
In my environment Mirroring is set up and the Principal/Primary and secondary are set up as well. I am having trouble added my mirror as a logshipping primary.
BOL says to create the Mirror/Primary I need to use the Transact-SQL commands. But sp_add_log_shipping_primary_database checks to make sure the status of the database is "Online". So when I run sp_add_log_shipping_primary_database to add the mirror db as a Primary I get the following error:
Msg 32008, Level 16, State 1, Procedure sp_add_log_shipping_primary_database, Line 58
Database TestMirror is not ONLINE. Cannot proceed with log shipping primary processing.
Am I doing something wrong? I am following the BOL page http://msdn2.microsoft.com/en-us/library/ms187016.aspx .
View 5 Replies
View Related
Dec 31, 2007
Hi all,
I have configured some Mirroring alerts based on Micosoft's documents. Mirroring.
If you can help me in setting some of the "Thresholds" for the Mirroiring alerts. That will be helpful, because i didnt see anywhere about the actual threshold limits setting for alerts ( In Production). Any approx. also OK.
At Principal:
(a) Unsent Log = ------ KB
(b) Oldest Unsent Transaction = ---- Minutes
At Mirror:
(c) Unrestored Log = ---- KB.
(d) Mirror Commit Overhead = --- MilliSeconds
Thanks again.
View 3 Replies
View Related
Feb 19, 2007
Hello,
I have installed sql server 2005 along with reporting services... though i am able to design report using business intelligence studio... i am unable to access the report server.... while trying to start the reporting services configuration manager it says no report server found on the specified machine...Invalid Namespace... the installation is local ...
Due to this problem inspite of designing the entire report i am unable to deploy it on the web..since it is asking for a report server...
Can somebody please help me on this...
Thanks in advance...
Nirupa
View 8 Replies
View Related
Oct 20, 2011
I have setup database mirroring with witness server. To prevent unnecessary failover because of network slow or other issue, I changed the timeout setting as
ALTER DATABASE <Database Name>
SET PARTNER TIMEOUT 120
Which I understand if connection is broken between principal and mirror, principal database will wait for 120 second and after that only automatic failover will happen.
If this is true, it does not happen in my case. Failover happens before120 second.
View 5 Replies
View Related
Nov 18, 2008
I wrong a custom code in my report - Public shared Function Myfunc and in the header textbox - I tried to reference this code = Code.Myfunc.... the Myfunc gives an error Unrecognized identifier.The code is written in the report properties = Code Tab.
View 4 Replies
View Related
Jul 26, 2006
I'm trying to set the value of the SelectedDatabases collection property of an Update Statistics Task using an expression for the task, basing it on a user variable. Ultimately, I'll set that variable's value from a configuration file at run time and thereby specify the database whose statistics I want to update.
When I set this up in the designer, I get an error at the time I try to save the package:
TITLE: Microsoft Visual Studio
------------------------------
Nonfatal errors occurred while saving the package:
Error at Update Statistics Task: The result of the expression "@[User::SelectedDatabase]" on property "SelectedDatabases" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
Error at Update Statistics Task: The result of the expression "@[User::SelectedDatabase]" on property "SelectedDatabases" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
------------------------------
BUTTONS:
OK
------------------------------
I used the expression editor's expression builder to select the user variable, so I assume the syntax is correct. However, I'm suspecting that there's some additional syntax required to store that value in the collection's array. I cannot find any references to any special formats and am wondering if anyone know's how to do this correctly. On the other hand, maybe it is telling me setting this property from an expression is not even allowed. If it's not allowed, why is it in the list of properties to set? In any case, none of this is clear.
Any ideas or suggestions are appreciated. Thanks,
Joe
View 8 Replies
View Related
Mar 21, 2007
During an install of SQL Server 2005 Express setting the sa password does not work consistently. The install is being run as administrator and I am using an .ini file to pass the settings,
SECURITYMODE=SQL
ADDLOCAL=ALL
SQLBROWSERAUTOSTART=1
SQLAUTOSTART=1
INSTANCENAME=DBSERVER
SAPWD=Westtech#1
and while most times it works correctly, occasionally, maybe 4 out of 10 times it fails to set the password and I have been unable to find any warnings or errors in the logs it generates.
We are coming up on release and this is causing us some real problems. Does anyone have any ideas, something I could look at?
Thank you,
Kathy Mook
Westbrook Technologies, Inc.
View 6 Replies
View Related
Feb 17, 2000
Hi, There
I have a BIG question.. Question is "How can I find out that SQL server7.0 has a Case Sensitive setting?" Where can I find this setting?
Thanks inadvance
Jay
View 2 Replies
View Related
Jul 1, 2015
give me query or script to find autogrowth setting of all databases in instance
View 5 Replies
View Related
Oct 31, 2007
Hello,
I have a package that copies data FROM an MS Access database table to a SQL Server 2005 table. 'Run64BitRunTime' has been set to 'False'. The package has been saved to SQL Server. I have a Job that runs the package using an operating system command. The following is the command syntax:
€œC:Program Files (x86)Microsoft SQL Server90DTSBinndtexec.exe€? /SQL "RebatesRebates_TotalSecurity" /SERVER bwdbfin1 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
I created the package on a machine other than bwdbfin1. I can run the package from Visual Studio. I can run the package from Integration Services. I have sysAdmin rights on bwdbfin1. I've tried running the job using two different proxy accounts and the sql agent account. I have the location of the Access database. No matter what I do, the Job fails with the following error:
The process could not be created for step 1 of job 0xD947EF76ACD96340B12279FEDDC580CE (reason: The system cannot find the file specified). The step failed.
I have an identical package that copies data TO an Access database. The database addressed in that package and this package are in the same location. The 'CreatorName' of both packages is the same. I have logging enabled for every category, but nothing is written to the sysdtslog90 table when the Job runs. I set up error output in the DataFlow task, and have also tried to 'ignore' errors. I have searched the forum, done a web search, and I can't find a reason for the failure.
Is dtexec the file that is not found? If that were the case, then why can a Job run my other package?
Any ideas?
Thank you for your help!
cdun2
View 4 Replies
View Related
May 18, 2006
Can anyone offer any help with this?
Error maesage:
Status:
Failure sending mail: The Report Server has encountered a configuration error; more details in the log files
Windows 200 Server: SP4
RS 2000: SP2
SQL Server 2000, on the same server as RS.
We
get this error whenever we try to run a report with the report
attached. However, the email sends fine if the report is not attached.
Reports can also be exported into different formats without problem when viewing the report through report manager.
View 6 Replies
View Related
Nov 21, 2015
I've got SQL Server 2014 Developer installed, and working.  After rebooting, the event log looks like it's working fine.  However, ever since I uninstalled Visual Studio 2013 Premier and installed Visual Studio 2015 Professional, both with SQL Server Data Tools, whenever I try to start SQL Server 2014 Management Studio, I get "Cannot find one or more components. Please reinstall the application."Is there any way I can avoid uninstalling SQL Server?
I managed to solve this, based on a recommendation (at URL...).  I ran SQL Server's setup.exe, and chose Repair, and now it appears that all is well.
View 2 Replies
View Related
Aug 16, 2006
Hi,
I am trying to mirror the databse with a witness server.
I have sql server 2005 with SP1 or both my mirror and principle and sql express on my witness.
The problem is when I click start mirroring, I get the following error
The server network address"TCP://serveraddress:7026" can not be reached or does not exist. Check the network address name and that the ports for the local and remote epoints are operational.
(Microsoft SQL server, error:1418)
I have pinged the address it works fine . The telnet comes up with a blank screen.
When I look at the the server log file viewer, I get the following message
An error occured while receiving data: 10054 (An existing connection was forcibly closed by the remote host)
for 'TCP://serveraddress:7026'.
Please help me soon
View 6 Replies
View Related
Mar 24, 2008
Hi, I am using SQL 2005 and I have just installed Report services.
I set this up once before and when I finished I could navigate to a URL that took me to a screen
that showed the different Folders where I had stored different types of reports. From this screen I could also
manage the access of users to which reports they could access. Almost like a report management interface I guess you could say.
Now, with this install, when I navigate to http://localhost/reportserver I only get a screen as follows.
localhost/ReportServer - /
Sunday, March 23, 2008 5:23 AM <dir> Data Sources
Sunday, March 23, 2008 5:23 AM <dir> Report Project1
Microsoft SQL Server Reporting Services Version 9.00.1399.00
Can anyone help me with this ?
thanks
tattoo
View 5 Replies
View Related
Oct 23, 2001
I would like to determine the configuration for a given database in Microsoft SQL Server 7.0/2000.
If you examine the properties of databases using SQL Server Enterprise Manager, you can see that certain options exist for a database.
For example:
- ANSI NULL Default
- Recursive triggers
- Auto Update statistics
- Torn page detection
- Auto close
- Auto shrink
- Auto create statistics
- Use quoted identifiers
Can this information be obtain via a stored procedure?
What about information regarding the SQL server configuration itself?
If I use SQL Server Enterprise Manager, I can get properties for the
server.
For example:
- "Dynamcially configure SQL server memory" vs "Use a fixed memory size"
Is this information available?
Thanks!
View 1 Replies
View Related
Apr 5, 2004
We just started using SQL Server. I'm new on the SQL side of things. We have SQL setup in a test environment with users connecting and performing job related functions. An in house programmer has developed software for our users which connects to the SQL Server
I'm looking for information pertaining to events that have teken place within SQL. Does SQL give you details on updates and changes made to specific tables. I'm looking for some way of looking up item numbers and the user that entered the data. We have noticed that some of the users may be entering in wrong data within certain tables. And would like to educate them on what they are doing wrong.
I need to know what certain users are logging and entering into our SQL Server.
What are the most detailed logs that SQL Server provides that has information on what the users are doing has far an entering in data.
View 3 Replies
View Related
Mar 17, 2008
How do I get more details on maintenance plan tasks? I have "log extended information" checked but it doesn't add much detail.
For example, I would like to see all objects listed on the update statistics job like this:
Object 'cpf' was successfully marked for recompilation
View 1 Replies
View Related
Apr 19, 2007
Hi there,
I was wondering if there is a detailed view control (that can be linked to grid view control) in ordinary C# applications as we have in ASP.NET applications? Please if anyone has information regarding that let me know.
Regards
View 1 Replies
View Related
Apr 13, 2007
Hello,
Is it possible to establish a set of default report and report body properties, perhaps in an ini file of some sort so that upon creating a new project and adding a new report item the developer does not have to go through the process of setting up all the interactive sizes, margins, paper sizes, etc each and every time? We have an established header that we incorporate on all reports and while in transition to the new Reporting Services it was my hope of finding something will create the first set of default conditions to help us automate the process just a bit.
Thank you.
View 2 Replies
View Related
Jan 26, 2007
Hi all,
Does sombody have experience on dynamically set or change the default value of a report parameter?
Assuming: report parameters p1, p2, p3, p4 have been set up(and have their default value 'all') with the creation of the report1; report browseing is through reportviewer that embedded in the web application; datasource is datacube
What I want to do: based on the login user of the my web application, set default value of p1 as the user's username.
What I did is:
Microsoft.Reporting.WebForms.ReportParameter reportParam = new Microsoft.Reporting.WebForms.ReportParameter("P1","Mary");
ReportViewer1.ServerReport.SetParameters(new Microsoft.Reporting.WebForms.ReportParameter []{ reportParam });
what I got when reveiw the report:
P1 has no default value, and p2, p3, p4 greyed and could not choose value from them.
Any idea and suggestion will be pre-appreciated!
Jone
View 1 Replies
View Related
Aug 12, 2007
Hi,
I have a date field in my report which takes the current date as the value. My default regional settings is en-US. If I change my regional settings to Germany, on executing the report, I get rsReportParameterTypeMismatch for the Date parameter.
Any help in this regard is welcome.
Thanks.
View 2 Replies
View Related
Jan 9, 2008
Has anyone seen the error:
[rsInvalidColor] The value of the BackgroundColor property for the textbox €˜textbox14€™ is €œTransparent€?, which is not a valid BackgroundColor.
This is appearing when I set the BackgroundColor property in a SSRS report using an expression. What I'm trying to do is have the colour of the text and background returned by the stored procedure that returns the data for use in Matrix and Table. But the problem seems to relate to all controls in SSRS 2005.
Steps to reproduce are create a new report, add a TextBox.
Go to properties of the textbox and select the Backgroundcolor and select Expression...
Then add the expression:
="Transparent"
Transparent doesn't seem to be a constant, but does appear to be a value you are allowed to selected (and is the default) from the drop down in the background colour.
The work-around is to use White, which works if you don't use a background image or change the background colour of the page.
However if you do us the "Transaparent" colour, then it does return the correct effect, but generates an error in the Output window within the development environment. I'm just ignoring the error for the time being. but has anyone else seen this error.
Andy
View 7 Replies
View Related
May 16, 2006
Hi,
I want to set the language property of a report programatically. I get the language locale at runtime and once I get it, I need to go to all the reports which are published or still are on the local system (in rdl format) and set the language property on each of the reports.
Thanks,
View 6 Replies
View Related
Apr 10, 2007
Hi,
I'm a newbe in SQL Server and I have to build "Detailed Technical Design" Document regarding the SQL Server . If anybody knows something or has an example / structure about this document please send me a replay.....
Thank you in advance
View 1 Replies
View Related
Jul 25, 2007
Hello,
if a customer DOB is 1933-06-30 and a date of service is on 2007-06-21
that makes them 73 and not 74. How do I calculate an accurate years of age?
Thanks in advance.
View 7 Replies
View Related
