Hi --- I would like a few users to be query tables, run (create ?) stored procedures, etc. on a SQL 2005 Workgroup database (the sql server is on a dedicated server)...
Will the Toolkit version (or any other version) support this?
Thanks!
Hello Everyone,
I just got a Virtual Dedicated Server and installed SQL Server Express 2005 on it and while I was installing choose Mix Mode authentication and setup a sa password.....
I want to connect to that database remotely from my machine using VS 2005 or Management Studio....both are encountering the same problems.....
On the Virtual Dedicated machine if I install management studio I run has no problem....it asks me for the server name : somethingSQLEXPRESS then username and password and works fine...
The same thing I try to do remotely is not happy with ....I tried to give the IP address of the server same thing no luck.....
Can somebody tell me what I'm doing wrong and where....
Thanks,
Harsimrat
Can I connect to remote SQL 2005 server through SQL Server Management Studio Express? I always get a error code 18456 when I try to connect to SQL 2005 server through SQL Server Management Studio Express. I'm sure I enter correct username and password!
View 3 Replies View RelatedHi,I've an account with a hosting service provider online for SQL Server database. I've downloaded SQL Server 2005 Express from ASP.Net. How can I use it to connect to my SQL Server Database which is sitting on remote server? The hosting provider gave me following things to connect to the remote database.Server NameDatabase NameUser NamePasswordRegards,A.K.R
View 2 Replies View Related
I am trying to get SQL Express 2005 installed, I have tried this on two PC's within the Domain. Both get the same error. I am the Admin, MCSE since 1999, but I DO NOT know much about SQL. Have search Google for two days, renamed DLL's, installed localy, copied off the CD, update .net, windows updates.... The PC will load SQL 2005 (full version) and 2000, but the app doesnt seem to want anything but the Express version... any ideas would help...
btd43@hotmail.com westcoastpc@gmail.com
Product: Microsoft SQL Server 2005 Express Edition -- Error 1937. An error occurred during the installation of assembly 'Microsoft.SqlServer.Rmo,Version="9.0.242.0",Culture="neutral",processorArchitecture="MSIL",PublicKeyToken="89845dcd8080cc91",FileVersion="9.0.2047.0"'. The signature or catalog could not be verified or is not valid. HRESULT: 0x80131045. assembly interface: IAssemblyCacheItem, function: Commit, component: {D1B86CEE-1C5E-4960-B99F-7142D1582B1B}
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
View 1 Replies View RelatedI have an application developed by VB.NET 2005, and I need to install the Data base on a server to allow the clients access the data base from thier own computers, i need to allow all the functions on that data base (Insert, Update, and Delete).
I tried to do it by installing the SQL Server on a computer named (PC1) and the application on a computer named (PC2), and they are connected to the same subnet, I need to know what are the properties that I should do on the SQL Server in order to be visible through PC1 to make the connection string? And does the authintication mode affect the process?? whether it is Windows authintication or SQL Server Authintication??
Note: I am using SQL Server 2005 Developer Edition.
Thanking you in advance..
Mak
I'm having a problem connecting with a Java application but I CAN connect using my .Net application - the user name and password are the same for both (using the same database on SQL Server Express 2005).
The error I get is: "com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "CORNERS" requested by the login. The login failed." An interesing note - I get the same message if the database is not running.
SQL Server Express 2005 is installed in mixed mode.
Here is my connection string in the .Net appplication: <add key="connectString" value="Server=(local);UID=sa;PWD=myPasswd;Database=CORNERS" />.
These are my values in my Java app web.xml -
<init-param>
<param-name>DBDriver</param-name>
<param-value>com.microsoft.sqlserver.jdbc.SQLServerDriver</param-value>
</init-param>
<init-param>
<param-name>DBURL</param-name> <param-value>jdbc:sqlserver://localhostsqlexpress:1055;databaseName=CORNERS</param-value>
</init-param>
<init-param>
<param-name>DBUser</param-name>
<param-value>sa</param-value>
</init-param>
<init-param>
<param-name>DBPwd</param-name>
<param-value>myPasswd</param-value>
</init-param>.
And yes, the port is 1055 - I checked to find it.
I am using Microsoft SQL Server 2005 JDBC Driver 1.0 (sqljdbc_1.0.809.102).
Does anyone have any idea what is wrong so that the login fails in the Java application but works in the .Net application?
Hello
I use SQL 2005 - SQL Server Management Studio to connect to my hosting SQL Server to manage my database , its about 1 month which I have installed Vista and SQL 2005 its working fine in local , but today I just wanted to connect to my remote server and I got this error :
Cannot connect to <My server IP Address>
I thought its a server problem , but its not. I tested it by connecting using same SQL 2005 on a windows xp system , the problem is only in vista,
by the way its SQL 2005 SP2
what can I do to solve this prob
I have created a ASP.NET application on a development server that accesses a SQL Server 2005 database on the same server. This application runs flawless. However when I try to connect the same application to an identical database on a remote SQL Server database I get the following error " Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection." I actually backed up the database on the development server, and then restored the same database on the remote server. I can see the original ASPNET user account in the security tab of the restored database. However I cannot connect. The remote server has ASP.NET 2.0 installed. I have created a security database on the remote server (aspnetdb) and added the same login credentials as on the development server. I have changed the database connection strings in the web.config file to point to a: to the remote database only, and b: to both the remote database and the remote security database (aspnetdb).
I am at a loss, can anyone help.
i'm using sql server 2005 developer edition. In sql server 2000, when i connect to my remote database, i just need to provide my IP address, server name with password in Query Analyzer. However, i do not know how to connect to remote database in SQL Server 2005. I did allow local and remote connection using Surface Area Configuration. However, after setting this, i do not know where to input the IP add, server name and pwd as well...>_<.
Who can help me?? Thanks for ur expertise.
Hi all,
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
Thanks in advance,
Scott Chang
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang
Hi,
View 18 Replies View RelatedHi,
I want to make a component library in Visual Basic.NET and connect to a remote Sql Server. When I create a new DataSet with the wizard, I can only connect to a .mdf file, but not to a Sql Server. With Visual Web Developer I can connect to a Sql server. What is the difference between these enviroments ? How can I do the same with Visual Basic.NET ?
Thanks in advance.
Everything was working fine. I have been able to connect using windows authentication. Then, I went into the ODBC manager to add a data source and it failed to connect so I went back into the Server management studio to modify users. After doing this I now get an error when I try to conenct the management studio to the SQL server.
I wasn't modifying the login for my windows account that I normally use, I was modifying a different one, however I now get the message "An error has occured while establishing a connection to the SQL server. This kind of problem can ocure because the default behavior of the server does not support all connection methods" blah blah.
Does anyone know how I can attach to the server? Or, do I need to somehow remove the server and create a new one? How would I do that?
Thanks in advance for any input.
I've seen the following error posted when people try to connect to their server via their applications but didn't see anyone having problems when trying to connect with SQL Server Management Studio Express. Am I missing something here? This is the error:<<An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)>>The server is not remote so I don't see why I need to enable remote connection. I am also using the default connection settings.
View 3 Replies View RelatedOn my home machine without permanent network connections enabled, I cannot get the Management Studio connect to the database server. Always get this error:
Cannot connect ot MPLIAMSQLEXPRESS
Additional Information:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, erro: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I have used the SQL Surface Area Configuration Tool to reset the defaults to allow remote connections, stopped and restarted the server, but still get the same message.
Please help.
I'm green on this networking stuff so any help is greatly appreciated.
I have setup my home computer as a server and assigned a static IP to it. I installed SQL Server 2005 Developer and allowed remote connections to it through the Surface Area Config tool, added port 1433 TCP and 1434 UDP to firewall's exception list, and started the SQL Server Browser service.
Now I can't seem to remote connect to this SQL Server from my office network. Is there something I'm doing wrong here?
Thanks!!
Hey all! I am new in this form and also new with the SQL serve. I have installed that free express edition of SQL server 2005 and when i am trying to connect to server from my C#.net application i am not able to do it and when i am trying to degug it gives me the error that is the user is not SQL thrusted user. I am able to connect directly thru SQL server using this userid and password but not thru VWD 2005 Express application.
I have read online that so many people are having that problem. so is it the problem of swl server Express edition or do i have to make some setting to connect to the application.
Please please please please someone guide me . I am stuck here in the beginning only. I would really appreciate it.
the code that i wrote is here:----
using System.Data.SqlClient;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
}
}
protected void Submit_Click(object sender, EventArgs e)
{
String querry;
SqlDataReader dbread;
try
{
SqlConnection conn = new SqlConnection(ConfigurationSettings.AppSettings["Conn1"]);
SqlCommand comm = new SqlCommand();
conn.Open();
querry = " Select password from login where userId='" + TxtUser.Text + "'";
comm.CommandText = querry;
comm.Connection = conn;
dbread = comm.ExecuteReader();
dbread = null;
if (dbread.HasRows)
{
while (dbread.Read())
{
if (dbread["password"].ToString() == Txtpwd.Text)
{
Response.Redirect("home.aspx");
}
}
Response.Write("Your Password Doesn't Match");
}
else
{
Response.Write("Your User Name Is Wrong");
}
conn.Close();
}
catch (Exception ex)
{
Response.Write(" This is an Error - " + ex.Message );
Response.End();
}
Thanks,
Komal
Hello
I am able to connect to the server and most of the time I can't connect.
It is important to be able to connect so I can manage my mdf - database.
To test ... I disable the firework but I still can't connect 90% of the time.
Thank you in advance.
~ Peaches ~
Hi,
I have VS Pro 2005 and SQL Server Express 2005 installed on an XP Pro machine. When using VS 2005, in the 'Server Explorer' window I can see and attach to two SQL Server databases that I have set-up. But if I attempt to access the same databases from withn the 'Solution Explorer' window I get the following dialog box message,
"
Required Component Missing (Dialog box heading)
Connections to SQL Server Files (*.mdf) require SQL Server Express to function properly. Please verify the installation of the component or download from the URL: http://go.microsoft.com/fwlink/?LinkId=49251
"
I have uninstalled and then reinstalled both VS 2005 and SQL Server Express twice but it has helped.
I don't understand why I'm getting this error because all of the server configuration tools and connection utilities seem to work fine but VS say's that SQL Server Express is not installed.
Thanks,
CLN
P.S.
I had another application that required MSDE 2000A to be installed. When I removed the other application I also removed MSDE 2000A and that's when the problem began.
Hi. Im trying to get a asp.net web aplication to write data to an sql express server located on another server. However when i try to connect with VS 2008 it says: "Named pipes provider, error 40: - Could not open a connection to SQL server".
What do i need to do to get this to work. Do i have to set something in the sql server, and i assume i have to open some ports in my firewall aswell?
Any help sugestions would be aprichiated
I am currently using a Microsoft Access (MDB) for my application. But I am looking at allowing other users on the network access the same database -- I know a Microsoft Access database is not the best solutuon for this enviroment.
I'd like to use SQL Server 2005 Express in this case. I am very fimilular with SQL Server 2000 Std/Ent editions. My question is, can I use the free SQL Server 2005 Express edition and allow remote users to connect to that database? Or is it supposed to only be used as a local database accessed by only the machine it's installed on?
Thanks,
Jason
Hi,
I think this is a taff problem for me when I connect to remote sql express from .net application
I use Connection String:
Data Source=MYREMOTESVRSQLEXPRESS;Initial Catalog=microDB;Integrated Security=SSPI;Persist Security Info=True;User ID=micro;Password=micro
OR
Data Source=MYREMOTESVRSQLEXPRESS;Initial Catalog=microdb;Integrated Security=True;Persist Security Info=True;User ID=micro;Password=micro
And found EROR message when running aplication from client comp/application
"... Login failed foruser MYCOMPGuest... "
How to setup a user in the sql expss server to support Client/Server Application?
Anyone can help me?
regards.
md5
I've used Sql Server 2000 and Visual Studio 2003 for a few years. I've started a new position and they have access to Sql Server 2005 Standard and Visual Basic 2005 Express which I'd like to use for a new project. So I installed Sql Server 2005 and then VB 2005 Express on my workstation. I didn't choose the Sql Server option for VB Express because I already had Sql Server 2005 Standard installed with a simple database created. I created a simple vb project that justs connects to the database but I get the following error.
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0000, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I looked at permissions in the database and it looks ok. I'm the db owner and I'm using Windows Auth. My connection string is
"Data Source=MySystem;initial catalog=AdventureWorks;integrated security=true;"
I thought I'd look at the starter kit to get some ideas about what the problem is, but when I started the movie starter kit project, it was upset that I didn't have Sql Server 2005 EXPRESS installed. Yea, but I do have Sql Server 2005 Standard installed.
Any help will be greatly appreciated. Thanks.
In SQL Server Configuration Manager I apparently have a server namedSQL Server(SQL Express) running - however, in VS 2005 when I try to'add connection' (right click in server explorer) I cant see it- Iwould like to see it so I can create a new SQL server database.Any help much appreciated- trying to learn web programming usingvb.net, asp, html, vbscript and SQL server.D
View 2 Replies View RelatedPLEASE HELP ME
I ran the upsize wizard on one of my databases to SQL Server 2005 Express. I can connect to it just fine. I have 3 test users and they cannot. They get the following:
Connection failed:
SQL State: '01000'
SQL Server Error: 11004
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen (Connt()).
Connection failed:
SQL State: '08001'
SQL Server Error: 6
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specified SQL server not found.
I tried adding the SQL Server to 1 users System DSN, but I got this message:
Connection failed:
SQL State: '01000'
SQL Server Error: 53
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connt()).
Connection failed:
SQL State: '08001'
SQL Server Error: 17
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
What am I doing wrong???
I've developed an asp.net 2.0 web app with vs 2005 and am using a SQL Server 2005 Express database. The app works fine locally, but after uploading to the remote web server the following error occures:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
How do I go about granting remote connections to SQL Server Express?
Does the web server have to have SQL Server Express installed in order to run apps that utilize SQL Server 2005 Express databases?
Do I grant access locally on my machine or do I have to be on the web server to grant remote connections?
I've been using .net 1.1 with access databases for the past couple of years, so this is all new to me.
Thanks.
I'm using SQL Server 2005 Express, Windows XP SP2. I connect using Windows authentication.
The data source that I'm trying to hit is on a remote server. It's an OpenLink ODBC Data source, and the server is in another location. SQL Server 2005 Express and the ODBC connection are both installed/configured locally on my machine.
I can connect to the remote server. The DSN exists as a System DSN.
The DSN has its own proprietary configuration utility, which I can configure so that the server name is XPLILLEYGSQLEXPRESS. The configuration utility doesn't care; I connect successfully one way or the other.
When I open Management Studio Express, I can see my database (CMS) listed under the "Databases" folder, but there's no tables in there, other than the system tables.
So my question is, what am I missing?
Thanks
Geoff Lilley
Hello. I have SQLEXPRESS 2005 installed on my laptop running Windows XP Home Edition with SP2. I have an application that can connect to the local instance with no problem. The other day, I tried to configure SQLEXPRESS 2005 for a remote connection from my desktop. To date, I have been unable to figure out how to do this.
I have followed the instructions posted at various locations on the internet, but to no avail. While I can configure SQLEXPRESS 2005 to allow TCP/IP connections, I have been unable to restart the server.
Here is the pertinent snippet from the error log:
<time> Server A self-generated certificate was successfully loaded for encryption.
<time> Server Error: 26024, Severity: 16, State: 1.
2006-08-14 21:02:27.18 Server Server failed to listen on 'any' <ipv4> 0. Error: 0x277a. To proceed, notify your system administrator.
<time> Server Error: 17182, Severity: 16, State: 1.
<time> Server TDSSNIClient initialization failed with error 0x277a, status code 0xa.
<time> Server Error: 17182, Severity: 16, State: 1.
<time> Server TDSSNIClient initialization failed with error 0x277a, status code 0x1.
<time> Server Error: 17826, Severity: 18, State: 3.
<time> Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
<time> Server Error: 17120, Severity: 16, State: 1.
<time> Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I have a feeling this problem is due to the way my system is configured, not necessarily how my SQLEXPRESS 2005 is configured. My laptop and desktop are connected via a wireless router, and both machines are running Norton Anti-Virus 2006. I've added sqlserver.exe and sqlbrowser.exe to the exceptions list for the Worm protection on the laptop, i.e., the server machine. There's not a setting at the router that would prevent the server from re-starting, is there?
Any help is GREATLY appreciated!
Matt
Hi,
Does anyone know if it's at all possible to install SQL Server Express 2005 over a Remote Desktop on a Windows XP machine.
I know there are problems running SQL over Remote Desktop, in that it won't start up a User Instance, but I wasn't sure if we can install over Remote Desktop.
If it's not possible, can anyone point me to an official document stating this fact?
Thanks
Sam
All,
I'm a newbie here so forgive me if I have missed something completely obvious.
I have bought a shopping cart script of a well known company (Evolve Merchant 5) and I wish to set it up locally on my development server, I created a virtual directory, set the web application up and get the asp pages to display perfectly. However, in the configuration file (global.asa & web.config) for the application it reguests information to be provided: <add key="DBName" value="Database name" />
<add key="DBServer" value="IP address of server" />
<add key="DBUserName" value="User name" />
<add key="DBPassword" value="password" />
<add key="AltPassword" value="password" />
What I can't determine is what the SQL Server 2005's IP address is? the pages of this application show when I type http://localhost/catalogue into IE, so I presumed the server address would be the IP of localhost, when typed ping localhost into command promt it gives me 127.0.0.1, but when I enter this into the config file and try to load the application it just hangs and then eventually says:
"Microsoft OLE DB Provider for ODBC Drivers (0x80004005)[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied./catalogue/global.asa, line 54"
I have created a new database in SQL Express called: merchant509 and restored the tables to it as the manufactures help files state, I created a new login called shop which uses SQl authentication, so as I can provide a password. So the settings should look like this:
<add key="DBName" value="Database name" />
<add key="DBServer" value="127.0.0.1" />
<add key="DBUserName" value="shop" />
<add key="DBPassword" value="1684" />
<add key="AltPassword" value="1684" />
But it doesn't work, does anyone know what i have done wrong?? the SQL server is runnign on the same computer as I am trying to access it from, it is set to accept all forms of comunication i.e. TCP/IP etc.. in the server configuration manager the IP address part of TCP/IP in protocols shows IP1 as 192.168.2.2 active yes enabled yes, and IP2 as 127.0.0.1 active yes and enables yes, I have tried the 192.168.2.2 and this gives the same errors, this is my registed IP on my home network.
I'm now stumped, I haven't a clue what else I can try, I would be very greatfull if anyone has any ideas.
Regards,
Daniel Coates