Hi all,
I have several DTSX packages which send out report files by mail. For security purposes, the SMTP server can only be reached from specified IP addresses, from specified processes, with specified sender address. I know all this information, except the process name that sends out the emails in a DTSX package. So my question is, what process can be identified as the one that sends out the email?
Thx!!!
Can anyone assist me?
I am trying to create a trigger within our local database that will allow me submit an email to a local exchange server. Its an internal email that our company has created for responses by candidates when the original stored procedure meets a condition of TRUE.
Is SQL 7.0 capable of sending emails to a specified address through a Trigger? I was told it could but have yet to come across any documentation backing this up.
Would anyone know the generic syntax I can use to create such a trigger?
Any suggestions would be appreciated.
Thanks in advance,
Claude Johnson
cjohnson@staffmentor.net
Hi,
I've setup the option to mail the error to a person. When the option is on I get the error message by mail but the package does not finish (eg. the failing task does not become red and the output windows never says anything about the error) - if I set the option to off the task fails as expected.
Is there something I havn't set up correctly?
Regards
Simon
create proc emailnew
as
declare @From varchar(8000)
declare @Subject varchar(8000)
declare @Body varchar(4000)
declare @smtp varchar(8000)
declare @counter int, @tbl varchar(8000)
Declare @MailID int
Declare @hr int
Declare @To varchar(8000)
Declare @tblquery varchar(8000)
declare @id int, @deptemail varchar(8000), @tmpmth varchar(8000), @usedb varchar(8000)
set @from = 'name@mail.com'
set @subject = 'testheader'
set @body = 'testing successful'
set @smtp = 'smtp.com'
--=========================================================================
--============================ get database name =======================
IF (LEN(MONTH(GETDATE())) = 1)
BEGIN
Set @TmpMth = '0' + CAST(MONTH(GETDATE()) AS varchar(2)) --01
END
ELSE
BEGIN
Set @TmpMth = CAST(MONTH(GETDATE()) AS varchar(2)) --12
END
SET @UseDB = 'DATA' + CAST(YEAR(GETDATE()) AS varchar(4)) + @TmpMth --aia_DATA200712
--===================================================================
--============================ get table number =======================
set @counter = 1
while @counter >= 59
begin
IF (LEN(@counter) = 1)
BEGIN
Set @Tbl = '0' + @counter --01
END
ELSE
BEGIN
Set @Tbl = @counter --12
END
--=========================check if table being created exists
IF EXISTS (SELECT 1
FROM information_schema.schemata
WHERE catalog_name = 'temptable')
GOTO table_1
--=================================== get all email accounts =====================
set @tblquery = '
select ID, Email
INTO temptable
FROM
(
select distinct d.id, d.email from tt32_aia.dbo.department d right outer join tt32_aia.dbo.extension e ON (e.parentid = d.id) right outer join
' + @usedb + '.dbo.other' + @tbl + ' data ON (e.extn = data.extn) where callclass = '''' or callclass is null
UNION ALL select distinct d.id, d.email from tt32_aia.dbo.department d right outer join tt32_aia.dbo.extension e ON (e.parentid = d.id) right outer join
' + @usedb + '.dbo.inward' + @tbl + ' data ON (e.extn = data.extn) where callclass = '''' or callclass is null
UNION ALL select distinct d.id, d.email from tt32_aia.dbo.department d right outer join tt32_aia.dbo.extension e ON (e.parentid = d.id) right outer join
' + @usedb + '.dbo.local' + @tbl + ' data ON (e.extn = data.extn) where callclass = '''' or callclass is null
UNION ALL select distinct d.id, d.email from tt32_aia.dbo.department d right outer join tt32_aia.dbo.extension e ON (e.parentid = d.id) right outer join
' + @usedb + '.dbo.other' + @tbl + ' data ON (e.extn = data.extn) where callclass = '''' or callclass is null
)data
DECLARE deptemail_cursor CURSOR FOR select id, email
from temptable where id is not null
'
--=============================================================================
--====just above you can see the cursor.. below is sending the emails
--======================================================================
exec(@tblquery)
OPEN deptemail_cursor
FETCH NEXT FROM deptemail_cursor INTO @id, @deptemail
WHILE @@FETCH_STATUS = 0
BEGIN
--If LEN(@deptemail) > 0
--BEGIN
set @to = @deptemail
EXEC @hr = sp_OACreate 'CDo.message', @MailID OUT --CDo.message |CDONTS.NewMail <-- different mail server
EXEC @hr = sp_OASetProperty @MailID ,
'Configuration.fields("http://schemas.microsoft.com/cdo/configuration/sendusing").Value','2'
EXEC @hr = sp_OASetProperty @MailID ,
'Configuration.fields("http://schemas.microsoft.com/cdo/configuration/smtpserver").Value', @smtp
EXEC @hr = sp_OASetProperty @MailID , 'From', @From
EXEC @hr = sp_OASetProperty @MailID , 'HTMLBody', @Body
EXEC @hr = sp_OASetProperty @MailID , 'Subject', @Subject
EXEC @hr = sp_OASetProperty @MailID , 'To', @to
EXEC @hr = sp_OAMethod @MailID , 'Send', NULL
EXEC @hr = sp_OADestroy @MailID
--END
FETCH NEXT FROM deptemail_cursor INTO @id, @deptemail
END
CLOSE deptemail_cursor
DEALLOCATE deptemail_cursor
Table_1:
drop table temptable
return
set @counter = @counter + 1
end
this is suppose to send email automatically to every email account that it will get from all the tables (around 250 tables).
the problem is its not sending, but if i try to take my code outside of the "SET @COUNTER = @COUNTER + 1 END" and close the if statement above, i can produce the correct result.. i'm thinking maybe its the positioning? but, there could be some overhauling needed to do with this.. sorry for posting the sp. sorry for the trouble.. please help me
I receive the following error when trying to invoke xp_sendmail 'xp_sendmail: failed with mail error 0x80070005'. However, for alert notifications the email works fine. SQL is using an alias account to send mail. This account doesn't have any funny characters. Any ideas why the alert system works but xp_sendmail does not? The invokation of xp_sendmail is being done by SA.
Thanks.
ok, so sp_processmail is deprecated and should no longer be used in SS2005.
how do you process and execute a SS2005 query using an incoming email??
can it even be done in SS2005??
thanks for any ideas,
chester
How do you set up the service broker to process an email message, and how do you format that message and send it to the que.
Can the service broker alos process an html form from a que.
Thanks
Exec Prcoess task with source : ftp
destination :ftpunzip
work directory ftpunzip
executable : c:Program FilesWinZip
i am using expressing.
It is doing the unzip but getting this error
package process on server server1 has failed within the Task 'Unzip Files' with the following errors:
>
> File/Process "WZUNZIP.EXE" does not exist in directory "c:Program FilesWinZip".
This is the error message i am getting it
I began installing SQL Server 7.0 the other day on a standard NT Server. When I got to the installation options, Enterprise Edition was the only server option. It wouldn't install on standard NT. Nothing on the box, in the box, or printed on the cd indicated that it was the Enterprise Version. The error message says something about not being able to install on this server from this CD.
We called MS and they did admit to sending an unknown number of CD's out with the wrong setup. I just thought I would pass that on to those of you who might be questioning your own sanity.
Good luck getting the replacement copy. They are telling us that it will be 4+ weeks before they overnight our copy to us. I won't even try to figure out why it would take that long to get a copy. Let us all know if any of you have run into this. I would like to see how common this is.
We have SQL server 2005 Reporting Services SP1. In Report Manager I have a shared subscription that runs every hour between 8am and 6pm (I created the shared subscription in Report Manager, then modified it in Sql Server Management Studio to run the hours I wanted). I have a second shared schedule that runs Tuesday and Friday at 7am. For 2 separate report subscriptions - one uses the hourly schedule and the other uses the 2-day schedule, the first time they run during the day it sends 2 email - after that it sends only 1 email, as it should. I created a subscription to email a report when the report content is refreshed from a report snapshot. In Properties...Execution, I selected to render this report from a report execution snapshot, and selected my shared schedule. For the History property I have selected Allow report history to be created manually and Store all report execution snapshots in history; I am not using a schedule to add snapshots to report history in the History property.
When I look at the job in Sql Server Management Studio, it has only ran once each hour. When I look at the snapshot history, there is only one record for each hour. Why is the first scheduled instance sent twice instead of once?
I have a package which truncates files, fills them with data andshould send a mail with the files as attachment when it finishesrunning. In between, when the task is still running mail is sent withempty files. When I take a look at the directory (at the end of thetask), where the files are created I find out that the files are notempty.(e.g. in task: doA->doB->doC->SendMail. But instead of waiting tilldoB->doC finishes, it does the following: doA->SendMail ... may bebecause doB takes long.)Can I indicate anywhere that it should delay the mail until at the endof the task?Thanks in advance.Harp
View 1 Replies View Related
Hi all,
I am having a few problems with Database Mail and wondered if anyone could assist. It sends test mails fine, but when I run the following script:
(I've changed my email address in this post to test@test.com they are accurate in the scripts.)
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Test Mail',
@recipients = 'test@test.com',
@body = 'Sent by sp_send_dbmail',
@Subject = 'SQL Server Email Test Email';
It gives the following errors.
(from the above script)
mailitem_id = 16
profile_id = 2
recipients = test@test.com
copy_recipients = NULL
blind_copy_recipients = NULL
subject = SQL Server Email Test Email
body = Sent by sp_send_dbmail
body_format = TEXT
importance = NORMAL
sensitivity = NORMAL
file_attachments = NULL
attachment_encoding = MIME
query = NULL
execute_query_database = NULL
attach_query_result_as_file = 0
query_result_header = 1
query_result_width = 256
query_result_separator =
exclude_query_output = 0
append_query_error = 0
send_request_date = 2008-04-15 10:50:03.827
send_request_user = COMPANYTest.Test
sent_account_id = NULL
sent_status = failed
sent_date = 2008-04-15 10:50:04.000
last_mod_date = 2008-04-15 10:50:04.513
last_mod_user = sa
(from the test mail)
mailitem_id = 11
profile_id = 2
recipients = test@test.com
copy_recipients = NULL
blind_copy_recipients = NULL
subject = Database Mail Test
body = This is a test e-mail sent from Database Mail on UKDEVSQL1
body_format = TEXT
importance = NORMAL
sensitivity = NORMAL
file_attachments = NULL
attachment_encoding = MIME
query = NULL
execute_query_database = NULL
attach_query_result_as_file = 0
query_result_header = 1
query_result_width = 256
query_result_separator =
exclude_query_output = 0
append_query_error = 0
send_request_date = 2008-04-15 09:51:46.530
send_request_user = COMPANYTest.Test
sent_account_id = 4
sent_status = sent
sent_date = 2008-04-15 09:51:46.000
last_mod_date = 2008-04-15 09:51:46.610
last_mod_user = sa
sysmail_event_log gives this error for mail item 16 (the scripted email):
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 4 (2008-04-15T10:11:41). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Requested action not taken: message refused). )
I have a report that gets sends out through a subscription and sometimes the report has multiple pages and all those pages appear within one email.Is it possible to set the subscription in such a way that an email is sent per page when the subscription executes.
View 2 Replies View RelatedUnder IIS SMTP I can set bounced email redirect etc. how to do that with dbmail, the idea is I can get the list of bounced emails somewhere so I can create a report.
Any idea?
thanks
need help
split list of email add comma for evry email
i have tabe "tblLogin" and in this table i have field emall
like this
emall
-----------------------------------------
aaa@hhhh.mm
nnn@hhhh.mm
mmm@hhhh.mm
need to do ilke this
Code Snippet
@list_email = (SELECT emall FROM tblLogin)
--------------------------i get this
-----------------------@list_email=aaa@hhhh.mm ; nnn@hhhh.mm ; mmm@hhhh.mm
@recipients = @list_email
Code Snippet
IF EXISTS( SELECT * FROM [db_all].[dbo].[taliB] )
BEGIN
DECLARE @xml NVARCHAR(MAX)DECLARE @body NVARCHAR(MAX)
SET @xml =CAST(( SELECT
FirstName AS 'td','',
LastName AS 'td','' ,
Date_born AS 'td','' ,
Age AS 'td','' ,
BirthdayToday AS 'td','' ,
BirthdayThisWeek AS 'td'
FROM [Bakra_all].[dbo].[taliB] ORDER BY LastName FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))
SET @body ='<html><H1 align=center>aaaaaaaaaaaaaaaaaaaaaa</H1><body ><table border = 1 align=center dir=rtl>
<tr>
<td>name</td>
<td>fname</td>
<td>date</td>
<td>age</td>
<td>aaaaaaaaa</td>
<td>bbbbbbbbbbbbbbb</td>
</tr>'
SET @body = @body + @xml +'</table></body></html>'
EXEC msdb.dbo.sp_send_dbmail
@recipients =N'rrr@iec.co.il',
@copy_recipients='rrrrr@iec.co.il',
@body = @body,
@body_format ='HTML',
@subject ='ggggggggggggggggggggg',
@profile_name ='ilan'
END
ELSE
print 'no email today'
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and
every time the process id is different. Here it is 3880.
Darek
Hello ALL
what I want to achieve is to load a text file that has email addreses from disk and using the email addresses in the text file look it up against the email addresses in the database table then once matched delete all the users in the table whose email address were in the text file.
I also want to update some users using a different text file.
Please help me with the best way to do this
Thanks in advance
select * from sysprocesses
How can I determine whether a process a system or user?
Hello,
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process:
Spid 55 55
ecid 5 5
Ecid 0 0
ObjId 0 1784601646
IndId 0 0
Type DB PAG
Resource 1:1976242
Mode S IS
Status TransID GRANT GRANT
TransID 0 16980
TransUOW 00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH
CMD AWAITING COMMAND
Physycal id 1059
Login time 2007-07-05 04:29:53.873
nat address DFF06EBF974D
Wait type 0x0046
HostName .
BlkBy .
DBName grpprddb
CPUTime 54331
DiskIO 1059
ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request:
select * from SYSOBJECTS
where id=1784601646
But I have had no returns.
Regards,
Renaud
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
Hi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. &And this error if open the report using the report manager:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. ยง Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed
View 5 Replies View Related