Why DTS Package Worked From DTS Designer But Failed On Scheduled Job?
Aug 11, 2006
I created a DTS Package. It worked fine if I
execute the DTS from DTS designer. It failed after I right clicked to Schedule Package, and than right clicked on the job to Start Job from Management - SQL Server Agnet - Jobs. When I clicked View Job History, the error was "The job failed. The last step to run was step 1 (DTSPackageName).
Why did it fail from scheduled DTS?
Thanks.
DanYeung
View 1 Replies
ADVERTISEMENT
Jul 6, 2006
i had scheduled to run a package it failed but a part of the package still shows up on the integration system running packages. i tried to stop it or delete it nothing works. when i try toi run the package even in visual studio that part of the package fails.
how do i remove the running package???
Thanks
jas
View 3 Replies
View Related
Jun 22, 2014
I create a package that has a foreach loop container, inside the FE container the is a dataflow, script task and a file system task, on the outside of the FE loop I have a SQL execute SQL task. I had it working then it just stopped. Been looking to see why but can't see why, is there something I missed. I changed the onError script task event handler, to propagate = false, because the last file in the source directory is being written to until 11:59 pm and is locked, and I get error file is being used by another process. I am at a loss as to why it would just stop working.
View 4 Replies
View Related
Jun 14, 2006
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
View 5 Replies
View Related
Mar 31, 2008
Select into query that ran for several hours failed and table got truncated ... what might be the reasons? In the db I have two datafiles... with unrestricted growth and the space allocalted are
13834 MB and 12576 MB. What can be the problem?
one of the sql server logs were:
Autogrow of file 'filename2' in database 'dbname' cancelled or timed out after 4094 ms. Use ALTER DATABASE to set a smaller FILEGROWTH or to set a new size.
View 3 Replies
View Related
Jul 21, 2002
Hi all,
I am using SQL Server 7.0 SP3. There is a scheduled job running daily. It was running fine but one day it didnt run and started running fine from next day. There was no error logs in NT log & SQL Server Error log. The reason why the scheduled job was not triggered is unknown. Anybody come across like this before? Can anyone tell me the reason why job didnt run.
Note: SQL Server Agent was running on that day too. So what could be the reason the job failed ?
regards,
Nana
View 2 Replies
View Related
Nov 21, 2006
We run 4 nightly scheduled jobs on our sql 2005. All use the same domain account and were running fine until a few days. Then the SSIS job started failing when run via the scheduler. (It does run when I execute it manually). The sql 2005 History simply says the package failed and was "Executed as <Domain-User>", the same user that successfully ran the other 3 scheduled jobs.
SQLAgent.out shows SQLServer Error:: 2812 Could not find stored procedure: msdb.dbo.xp_sqlagent_notify.
Relevant?
Any ideas wherewhat to look for next?
TIA,
Barkingdog
View 1 Replies
View Related
Aug 16, 2006
Hi Greeting,
Sql sever7
OS winNT
We have scheduled transaction log backup for user database to run every one hour. Now the transaction has failed. it gives out put
[12] Database oas: Delete Old Backup Files...
Unable to delete file E:mssql7 logsoasoas_tlog_200608111300.TRN. 0 file(s) deleted.
When we try to delete the file manully, we get alert message "can not delelte the file as it is in use."
Please suggest how to solve this.
Awating for reply
Thanks in Advance
Adil
View 1 Replies
View Related
Apr 11, 2008
Hi,
I have installed backward compatimility package and dts designer components on my computer wich run sql server 2005.
When i try to open a DTS package in management studio, It tries to install sql server 2000 and ask for sql2000.msi.
Does any one know how to fix this so i can edit dts packages in management studio 2005?
/Fredrik
View 1 Replies
View Related
Apr 6, 2007
after installing the Microsoft SQL Server 2000 DTS Designer Com feature pack and then restarting my management studio, I still cannot see or edit my dts packages. I also tried editing them in the integration services consule but no luck there. I see them under the msdb and have no option to edit them.
Has anyone got this utility to work?
Thanks,
David
View 4 Replies
View Related
Feb 29, 2008
We just did an in-place upgrade from sql2000EE to sql2005EE and I installed the SQL Server 2000 DTS Designer componets but I don't see the option to schedule a package.
Thanks for you input.
View 1 Replies
View Related
Sep 28, 2000
Hi All,
I have created a DTS package on a developement server that connects to our Exchange server and downloads customer service e-mail and inserts them into a table. This is done using a VB script.
When I right click on the job and execute it, it runs fine and we can see the mails after they show up in the table.
However, when I schedule the job to run at 15 minute intervals it fails with a vb runtime error. When I copy the job to my personal machine and schedule it, it runs just fine and again we see the mails in the table.
The server has the latest version of the scrrun.dll as well as IE 5.0.
I have messed around with this for 3 days now and have gotten MSFT involved as well.
Anyone seen this before? Any ideas or help will be greatly appreciated.
Brad Keck
View 1 Replies
View Related
Jan 16, 2008
Hello Everyone,
When I run DTS from SQL Enterprise Manager its running fine.But When I Scheduled it then it takes lot more time.
What is the differenace between when we run it from Enterprise manager and run it from Schedule?
Why Scheduled DTS running very slow? Is there any solution of it?
If anyone know Please replt as soon as possible.
Thanks,
Bhavik Shah
View 5 Replies
View Related
Mar 28, 2007
I am not sure where to ask this question. So I figured here may be ok
I have several DTS 2000 packages and I have SQL 2005 installed on my local machine. However the rest of the company is still using SQL 2000 (for now). So I do not want to convert them to ssis yet. One of the things we just did to the packages is make all flat files use \localhost and any servers point to (local). Now in ssis this works fine but using the DTS 2000 package designer it does not like either of these at all. The reason we wanted to do this is so when we switch out servers there is no changes to our DTS packages.
View 2 Replies
View Related
Feb 21, 2007
Hello,
This morning I got an odd problem, I just added a new package to my dtproj and I cannot add a variable. Am I missing anything. ?
here is the image
View 6 Replies
View Related
Jan 9, 2007
Hi,
When I installed SP1 on my SQL Server 2005, the performance of the package designer dropped enormously. I have to wait like 30 seconds after I drag-and-drop a datasource from the toolbox to the design area. Also it takes a very long time to run the very simple package. Not to mention opening some complicated package that was done before applying SP1. The package scheduled in SQL Agent went from 3-4min to 5-6min.
Can anyone address this issue? Maybe there's something I did wrong?
While installing SP1 I ecountered strange behaviour (some messages about file locking, rebooting and stuff), but in the end it said that it was successful
Best Regards
Wojtek
View 8 Replies
View Related
Jul 20, 2005
After setting up the linked server connection at the standby server, Itried to xcopy a file through the sql server 2000 schedule task to thestandby server's shared directory. But it keeps giving me the errormessage with'Invalid Drive Specification'.My whole process includes1) set up linked server connection on the standby server2) set up job to xcopy file as operating system commend in sql serverfrom the production box(xcopy c:directoryfile.bak\standby_servere$directory /c)3) test, but not successful - I am already running the whole scheduletask as a Windows user with Admin authority.)What did I do wrong or did I miss something?Thanks in advance
View 6 Replies
View Related
Apr 21, 2008
Dear all,
I've built SSIS package and made a job to execute it automatically but it always returns an error. The job returns OK but when we looked at the Log File viewer, it conatins this error log :
Key not valid for use in specified state
Failed to decrypt protected XML node "DTS Password" with error
What's wrong with the package ?
Thanks in advance.
Best regards,
Hery
View 22 Replies
View Related
Sep 15, 1999
I have created a package that takes a Visual FoxPro .dbf and imports into SQL7. If I run the job, it works fine. If I schedule the job it fails stating that I can't find the .dbf, the same one that it just found when run manually. What gives?
View 1 Replies
View Related
May 11, 2006
My database resides on my ISP SQL server, in Colorado. My new data can be found as a TXT file on the C: drive of the shipping PC in my Florida office.
I created a DTS package to import the data from the TXT file to a table in my database. The package works fine, until I schedule it to run.
The package uses the UNC address to find the TXT file. As a result, I can go to any PC in my office and execute the package.
But, when I schedule it to run unattended, it fails.
Can anyone give me any advice?
View 1 Replies
View Related
Jun 22, 2004
Hi,
I have a DTS package which when I execute it manually, it executes perfectly. I need to schedule it and therefore had to use the scheduler which would creata a job for the package. The problem is that job. It does not execute; it fails every time. The error message is: Sql server does not exist or access is denied.
I have tried to trouble-shoot by setting up an alias for the server in the client network utility for sql server. I also create a new dsn with the new alias. It still failed with the same error message. I edited the properties of the dts package to connect to the server's ip instead of it's alias or logical name. Still fails.
Any ideas anyone?
Maria
View 1 Replies
View Related
Jul 21, 2007
The package has 15 DTS 2000 tasks that execute sequentially, depending on 15 successes. The 15th task then invokes 11 more DTS 2000 tasks simultaneously which each invoke a mail task on their success. The package is saved as part of a valid project. The entire package is successful executing within Visual Studio -- 37 green boxes. I move the package as file system .dtsx to my database as a stored package within MSDB and then schedule it as a job via SQL Agent invoking the MSDB stored package.
The package has a log file referenced in the scheduled job for errors and diagnostics while each of the 26 Transforms Data Tasks within the DTS 2000 packages writes to a fully qualified exception file on my server. The log and exception files have valid data when the package runs in Visual Studio but the exception files are untouched when the job fails and the log only references one of the 11 dependent steps with a job failed message. SQL tables are updated and files created from the Visual Studio execution but nothing is created when the job fails.
I am assuming there is a disconnect with the way I am moving the package to the scheduled job but I don't know what the problem is. Can anyone help?
Den
View 2 Replies
View Related
Jul 20, 2005
Hi,A DTS package which is running fine when execute ,always fails asscheduled job.I read from the previous posts about MS KB article 269074, securityand MDAC, but I don't understand and don't know how to solve it.Please help.My scenerio:SERVER : MS Windows 2000 server is in a PRODUCT DOMAINMS SQL SERVER 7.0 SP2- Agent started up by SYSTEM ACCOUNT andConnection as NT AuthenticationWORKSTATION (Enterprise Manager as Tool to connect MS SQL SERVER andwrite and schedule DTS Package): MS Windows XP connect as NT Authenticationbut in WORKGROUP DOMAINBest RegardsNipon Wongtrakul
View 1 Replies
View Related
Nov 20, 2006
I have a large number of SSIS packages, which I have developed over the last few months.
Having written and tested them locally, running in VS05 etc - I have moved them to a server, stored in the MSDB database.
I am having real troubles with packages that move tables from one database to another.
I am working on a migration project, so I have several packages that move tables from the source database, into my staging database.
One package which will not run at all, basically just moves 15 tables from database A on my server to database B.
The package is essentially a few SQL tasks to create tables, then a data flow.
The data flow contains the table movements as an OLE DB source to an OLE DB destination. No intermediate processing.
In an attempt to get some meaningful logs of the reasons for failre I ran the package from the commandline with the output piped to a text file. That text file contained the following error:
Error: 2006-11-20 11:48:47.78
Code: 0xC0202009
Source: Data Flow Task Source - tblParking [1641]
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: No process is on the other end of the pipe.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: No process is on the other end of the pipe.
".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Shared Memory Provider: No process is on the other end of the pipe.
".
End Error
Error: 2006-11-20 11:48:47.78
Code: 0xC0047038
Source: Data Flow Task DTS.Pipeline
Description: The PrimeOutput method on component "Source - tblParking" (1641) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
End Error
Error: 2006-11-20 11:48:47.84
Code: 0xC0047021
Source: Data Flow Task DTS.Pipeline
Description: Thread "SourceThread1" has exited with error code 0xC0047038.
End Error
I've googled for most of the error messages there, and tried applying some of the things I found.
I've set the commit size on the OLE DB destination to 10k rows.
I've set the number of engine threads to 2.
The SQL Agent service is started by a domain user that has sufficient server and database roles to do what it needs - other packages run fine.
I'm really stumped here now - this package will run perfectly in visual studio, but fails when ran
as a scheduled task, and I'd really appreciate any advice or pointers
View 6 Replies
View Related
Apr 1, 2008
Hello,
I'm having problems scheduling a package and using the "Set Values" option. I'm setting a variable value to a connection string for a Connection Manager (I couldn't set it to keep the password using the "Data Sources" tab), however, this raises an error on SQL Server Agent:
Executed as user: SEQM001SYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Argument ""Package.Variables[LogDBConnString].Value;Data Source=123.456.789.000;Initial Catalog=myDB;Provider=SQLNCLI.1;Uid=myUser;Pwd=myPassword;Auto Translate=False;"" for option "set" is not valid. The command line parameters are invalid. The step failed.
However, if I copy the command line generated and run it using dtexec, it all goes perfectly fine. Any clue to what's wrong?
Thanks in advance
View 3 Replies
View Related
Jan 9, 2007
Hello,
I have put together a simple SSIS package that runs fine both via BIDS and via Mgt Studio.
The problem I have is that I can't get a scheduled job to run it. My scheduled job has only 1 step - and that step runs the package.When I right click in Mgt Studio (SQL Agent) and choose "Start Job" I get this error :
------------------------------------------------------------------------------------------
Executed as user: NMR044BRASQL886SYSTEM. ....3033.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 14:10:56 Error: 2007-01-09 14:10:56.50 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Property" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2007-01-09 14:10:57.04 Code: 0xC0202009 Source: B2B_Sales_Territory_Send_Back Connection manager "b2b_datamart" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'NT AUTHORITYANONYMOUS LOGON'.". End Error Error: 2007-01-09 14:10:57.04 Code: 0xC020801C... The package execution fa... The step failed.
------------------------------------------------------------------------------------------
Can anyone help please?
I'm new to SSIS so clear+simple answers appreciated.
Thanks in advance
Mgale1
View 10 Replies
View Related
May 4, 2006
I have created a DTS package to read data from a SQL Server table and copy it to an Excel file on one sheet. I have tested the DTS package manually and it runs. I scheduled the package but it keeps failing giving the following error message. The path to the Excel file is valid and the SQL server is connected to the server where the Excel file resides.
... DTSRun: Executing... DTSRun OnStart: Copy Data from vw_Symbols to vw_Symbols$ Step DTSRun OnError: Copy Data from vw_Symbols to vw_Symbols$ Step, Error = -2147467259 (80004005) Error string: 'S:Mission Critical EnterprisesCurrent ProjectsJPMC Aperture Rollout 05-100-1-0001Symbol RequestsJPMC - Symbols Added.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. Error source: Microsoft JET Database Engine Help file: Help context: 5003044 Error Detail Records: Error: -2147467259 (80004005); Provider Error: -534774783 (E01FFC01) Error string: 'S:Mission Critical EnterprisesCurrent ProjectsJPMC Aperture Rollout 05-100-1-0001Symbol RequestsJPMC - Symbols Added.xls' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. Error sour... Process Exit Code 1. The step failed.
View 6 Replies
View Related
Aug 15, 2002
I have an ActiveX task containing vbscript that when placed in a DTS package, will set all Connection and DataTransformation (DataPump) information correctly. Additionally, the package appears to work perfectly afterwards.
The Question:
Why when I go into the DTS Designer and open a transformation (Black Arrow) between connections - that I get the "Verifying Transformations" dialog with the three radio button options of "Remove Invalid transforamtions", "Change Source/Destination", and "Remove all transformations and redo auto-mapping"?
It appears that the SourceObjectName and SourceSQLStatements are getting correctly updated as well as the DestinationObjectName, etc.
Is there a property that is supposed to be set when I modify the source and destination properties in my code to prevent this dialog?
Thanks a bunch in advance for any assistance
View 1 Replies
View Related
Dec 12, 2006
After fine-tuning my package logging, I built a query against SYSDTSLOG9 that uses the combination of the OnPreExecute events and any subsequent event for each task to build a nice view of a package in progress, including the duration of each event. (Running tasks would have a row with a NULL EndTime.)
When running the package within the Designer, everything works as expected. Events are logged at the task level and everything bubbles-up to the package level.
However, when I run the package from SQL Agent (using the SSIS job step), none of my OnPreExecute or sub-component events are written. That is, I only get package-level OnInformation, OnPostExecute and OnError events.
This means when the job/package is executing, I can't directly see which steps are currently in progress nor can I get a duration for each step once it's completed. This will be very disconcerting for my teammates who will have to help support this at some point.
Any idea how or why there would be a change in behavior between these two execution methods?
Thanks in advance for any help. Until then, banging my head against the wall...
Tim
View 8 Replies
View Related
Aug 10, 2007
Our Visual Studio installation suddenly starting producing the error below upon trying to open any .dtsx package; although by "suddenly" I'm sure it was due to some Windows update or other program install, update, or uninstall. I've spent two days uninstalling, reinstalling, and repairing everything that is seemingly related to VS, but no luck. I've searched the forums and could not find this specific error mentioned, although I have tried some of the suggestions to fix possibly related 'class not registered' errors, but again no luck.
===================================
There was an error displaying the layout. (Microsoft Visual Studio)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=DDSErrorDeserializeDiagram&LinkId=20476
===================================
Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)) (msddsp)
------------------------------
Program Location:
at MSDDS.IDdsDiagram.CreateShape(String ProgID, Boolean Visible, Int32 X, Int32 Y)
at Microsoft.DataWarehouse.Controls.Interop.AxMSDDS.CreateShape(String progID, Boolean visible, Int32 x, Int32 y)
at Microsoft.DataWarehouse.Design.ComponentDiagram.OnCreateShape(Object logicalObject, Int32 x, Int32 y, Boolean visible)
at Microsoft.DataTransformationServices.Design.DtsComponentDiagram.OnCreateShape(Object component, Int32 x, Int32 y, Boolean visible)
at Microsoft.DataWarehouse.Design.ComponentDiagram.CreateShape(Object logicalObject, Int32 x, Int32 y)
at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.CreateExecutableShape(DtsContainer dtsContainer, Int32 x, Int32 y, Int32 width, Int32 height)
at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.RefreshSequenceExecutables(IDTSSequence sequence)
at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.AfterDeserialize()
Any help would be greatly appreciated.
TIA,
Scott
View 7 Replies
View Related
Jul 5, 2006
Has anybody seen this issue already?
If you try to "enable memory restriction" from the Lookup component GUI you need to input both 32 and 64 bit size of maximum memory. However when clicking "OK" on the editor you get a message like :
TITLE: Microsoft Visual Studio
------------------------------
Error at Update Execution Logs [Lookup folder path 1 [4429]]: Failed to set property "MaxMemoryUsage64" on "component "Lookup folder path 1" (4429)".
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0204006 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
You can only set the properties directly for mthe Properties window (F4).
I think this is a post SP1 bug in Visual studio designer...
View 5 Replies
View Related
May 11, 2000
I have a Local DTS Package that I created that runs fine. I have scheduled it to run daily but it errors out when run it from the agent. This is an excerpt of the error from the Job history.
Delete from Table [Intranet].[dbo].[Employees] Step, Error = -2147217887 (80040E21)
This Local DTS Package, deletes the records in the file and reimports the data from an AS400 file that is recreated for me daily.
The only thing that has occured to me so far is that perhaps the SQL Agent Service Account needs permission to delete the records. (I'm using NT Security).
Am I on the right track or do you think it's something else?
View 1 Replies
View Related
May 27, 2004
I have created a package that do a file search on an AS400 box using activex scriptand UNC path to do the file search. When I run it locally, it's fine. When I run it on the server, it fails. The login setup for the sql server agent service and the job is the same and they both have admin rights.
In addition, I also have another package pointing to the same path, but the job is to create a text file to the UNC path. It works even when I schedule it.
May someone please help me to solve this problem ?
Thanks!
View 2 Replies
View Related