Why I Can't Do A Selection By Using A LinkedServer?
Mar 21, 2007
I added a Linked Server, like this:
EXEC sp_addlinkedserver
@server = 'ServidorPrincipal',
@srvproduct = 'SQLEXPRESS',
@provider = 'SQLNCLI',
@datasrc = 'TIC-IISQLEXPRESS',
@catalog = 'BDPrincipal'
GO
But now I can't do a selection:
SELECT * FROM ServidorPrincipal.BDPrincipal.dbo.tblCADENA;
Because it sends this message:
Server: Msg 7356, Level 16, State 1, Line 1
OLE DB provider 'SQLNCLI' supplied inconsistent metadata for a column. Metadata information was changed at execution time.
OLE DB error trace [Non-interface error: Column 'ID_CADENA' (compile-time ordinal 1) of object '"BDPrincipal"."dbo"."tblCADENA"' was reported to have changed. The exact nature of the change is unknown].
The linked Server is called "ServidorPrincipal".
The database is: BDPrincipal.
And the table is dbo.tblCADENA.
"changed at execution time" ¿What does it mean?
What is happening here?
View 4 Replies
ADVERTISEMENT
Nov 6, 2000
Hi Everybody,
I have 2 servers one has SQL 7.0 running on NT4.0 and another has SQL 2000 running on W2K Server. I have established a linked server for SQL 2000 from SQL 7.0.
I don't have any problem of creating linked servers for sql 2000 from sql 7.0. I am also able to create linked server logins to access the sql2000 tables. Even I am able to see the tables on the Databases.
EXEC sp_addlinkedserver 'SQL2K', '','SQLOLEDB','GENOMESQL2000'
sp_addlinkedsrvlogin @rmtsrvname = 'sql2k' ,@useself = 'false' ,@locallogin = 'genomeACCT1',@rmtuser = 'test2k',@rmtpassword = 'test2k'
exec sp_tables_ex N'sql2k' (Upto this I don't have any problem)
When I tried to execute a particular table from the database, I am getting the following error.
Select * From sql2k.northwind.test2k.payroll
Error:
******
Server: Msg 7314, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' does not contain table '"master"."test2k"."ven"'.
Can anybody give suggestions to solve this problem.
tks in advance,
Vasu
View 1 Replies
View Related
Mar 21, 2007
Hi
Im sorry if im in the wrong section. My problem is a very common one and it has been hard for me to find the fix.
Ive gone thru Component Services, Firewall settings, Registry and Microsoft Sites, but to avail.
"The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]."
My Begin Tran doesnt start at all.
begin tran
use smartpos
go
set identity_insert smartpos.dbo.smp_product on
insert into smartpos.dbo.smp_product
(prodId
,[Description]
,barcode
,BuyPriceExclVat
,BuyPriceVatTYpeId
,point
,SupplierID
,Ref
,QtyType
,QtyFactor
,MinStock
,MaxStock
,Active
,ItemType
,ClientLastUpdate
)
select prodId
,[Description]
,barcode
,BuyPriceExclVat
,BuyPriceVatTYpeId
,point
,SupplierID
,Ref
,QtyType
,QtyFactor
,MinStock
,MaxStock
,Active
,ItemType
,LastUpdate
from server.smartpos.dbo.smp_product svr
where not exists (select prodid from smartpos.dbo.smp_product where prodid=svr.prodid)
set identity_insert smartpos.dbo.smp_product off
Can anyone help me please.
Thanks
View 2 Replies
View Related
May 31, 2007
Hi all,
I'm trying to change the datasource of a SQL Server LinkedServer using SMO
I've got the relevant linkedserver as an object, changed the DataSource property, and selected it again to confirm the change.
However, the change is lost as soon as the object is destroyed.
Looking at BoL I think I need to be using alter() method of the linkedserver class but I just get an error
Alter failed for LinkedServer '<servername>'.
any ideas how I should be using this class to do what I want?
I can post my script (PowerShell) if it would help.
Thanks, Robin.
View 2 Replies
View Related
Jun 23, 2008
I'm copying almost all contents of one table from one server/db to another. In relation to speed, what is the difference of using SSIS vs a linked server and sp? I'm going to do the benchmarks, but I'm curious about behind the scenes kinda stuff, theoretically which one if any should be faster and why?
View 5 Replies
View Related
Aug 29, 2007
Hello All,
I created two database instances in the same MS SQL SERVER 2005 named hafeez and local. I created a linked server from hafeez database to local named HTOL
I created a dummy table in local database named samplocal.
Now i am able to list the records using the linked server, for this i used the following query.
SELECT * FROM OPENQUERY(HTOL,'SELECT nameandval FROM SAMPLOCAL');
Now the problem is, i am not able to insert the rows into the samplocal table using linkedserver. I am using the following query to insert the rows and getting the following errro.
INSERT INTO OPENQUERY(HTOL,'SELECT nameandval FROM SAMPLOCAL') VALUES('tertertetttwertw');
Msg 7356, Level 16, State 1, Line 1
The OLE DB provider "SQLNCLI" for linked server "HTOL" supplied inconsistent metadata for a column. The column "nameandval" (compile-time ordinal 1) of object "SELECT nameandval FROM SAMPLOCAL" was reported to have a "Incomplete schema-error logic." of 0 at compile time and 0 at run time.
Is the above query correct? or shall i miss anything?
Please guide me.
Thanks in Advance
Hafeez Shaik.
View 3 Replies
View Related
Nov 23, 2005
I have a question when I work on LinkedserverThe Linkedserver name is [Hp-server],the Datebase name isNewexec,the Table name is Customers_CoypTestThe SQLScript is below:Update [Hp-server].Newexec.dbo.Customers_CoypTestset Unitname=b.Unitnamefrom [Hp-server].Newexec.dbo.Customers_CoypTest a joinNewexec.dbo.Customers_CoypTest bon a.Cid=b.Cid and b.Cid='Tony'The server returns ERROR like this:a) can not open this table '"Newexec"."dbo"."Customers_CoypTest"'(come from OLE DB provide server 'SQLOLEDB'). provide server do notsupport index scan on the data source.b) [OLE/DB provider returned message:Error occured whenmulti-operate.If possible, please check each OLE DB status value.Nowork had been completed.]c) OLE DB Error trace[OLE/DB Provider 'SQLOLEDB'IOpenRowset::OpenRowset returned 0x80040e21:[PROPID=DBPROP_COMMANDTIMEOUT VALUE=600 STATUS=DBPROPSTATUS_OK],[PROPID=Unknown PropertyID VALUE=True STATUS=DBPROPSTATUS_OK],[PROPID=DBPROP_IRowsetIndex VALUE=TrueSTATUS=DBPROPSTATUS_NOTSUPPORTED]].
View 5 Replies
View Related
Sep 14, 2006
Hi,
I am not expert on SQL server, i need to be able to access different server from withing sproc,
1. Is Linked Server is the best aproach.
2. If yes then how i set it up that it take all authenticated users of this server to remote, i tried with impersonate but it gives error that NT authority dont hae access etc etc (when i try run a sql that accesses remote server)
3. The reason i need to access remote server is ... one of the that table in my db (logTable) is getting to big it is 10 times the size of rest of the db altogether so i though i move it out not just from same db actully put it on a seprate server. so that all the tasks about main db would become easy etc.
any idea help
Sajjad
View 1 Replies
View Related
Jun 15, 2007
Hi,
We currently have an application that primarily sits on SQL server and needs to access some legacy data in a DB2 database. The solution we are using is to use a linked server between the two servers. The problem with this is that complex queries occasionally cause the driver to fetch a complete table and filter that table locally. I wondered whether service broker (which I have never used) could allow me to access the DB2 database using MQSeries and thus speed up the application as our ODBC calls have low priority on our mainframe.
Thanks and sorry if this sounds a stupid use of service broker.
View 1 Replies
View Related
Apr 27, 1999
When running a query with a table from another SQL7 Server that is linked, if only 1 table from each server is specified, the query runs fast and returns only the data rows needed from the linked server. When another table is added on to query (on the server running the query) the query processor tries to run a remote query and return over 400,000 rows over the network. Any suggestions?
View 1 Replies
View Related
Sep 23, 2004
After running the following OpenQuery...
UPDATE OPENQUERY(LINKEDSERVER, 'SELECT START_ORDER_NO FROM "OECTLFIL" WHERE "FILE_KEY" = 1')
SET START_ORDER_NO = 0
----The START_ORDER_NO field contains a 48
SET START_ORDER_NO = 1~9
----The START_ORDER_NO field contains 49~57 respectively.
SET START_ORDER_NO = 10
---The START_ORDER_NO field contains 12337
SET START_ORDER_NO = 11
---The START_ORDER_NO field contains 12593
SET START_ORDER_NO = 12
---The START_ORDER_NO field contains 12849
incrementing by 256 as I increase the value passed...
ASCII 48-57 are the characters 0-9. The string '10' consists of the two bytes with the values 49 (0x31) and 48 (0x30). It is being viewed in reverse byte order as the value 0x3031 which equals 12337 (48*256 + 49).
The LinkedServer is Pervasive SQL 2000i using 'OLE DB Provider for ODBC'
The START_ORDER_NO field is a Numeric(8,0)
I'm thinking some kind of Unicode, or translation or code page issue, but I haven't had any luck yet.
I'm not sure how difficult this is, I don't think I'm a neophyte but I'm feeling like one...
View 1 Replies
View Related
Oct 22, 2003
hello
in the database.....
table:1
DELIVERY_HEADER
INVOICE# PO#
1111 001,0002,0003
2222 005,0006,0007
in one invoice has many po# number i already get the po number individually using explode...
the ouput like this
001
002
003 and so on it is ok for that
but my problem is
i want to the po# should be selected i mean like a menu ..like the user select the which po# should be updated....
but i dont know how..
is there anyone can help me?
to elaborate more...
i can display the po# already without commas like in invoice# 1111
i can already display the po# number like this
001
002
003
after that i want it to be like a menu that user will only select the which po# should be updated..using arrow keys down and up....i mean just like selecting..
but i dont know how..
PLS HELP ME
thank
r3sann
View 1 Replies
View Related
Jan 17, 2006
Hi all, I am stuck on the case of many-to-many selection.
Now, I have 3 tables
Table: candidate_skills
candidate_id (PKey)
skill_id (PKey)
Table: skills
skill_id (PKey)
Table: job_skill_required
job_id(PKey)
skill_id(PKey)
Now, I want to select all cadidates who has the same skills of job_skill_required table.
I really don't know how to select it...
Please help, thank you.
View 5 Replies
View Related
Nov 16, 2007
SELECT Distinct a.group_code, a.group_name + '-'+ a.group_note As full_name ,
b.station_nbr, b.beg_eff_date, b.end_eff_date,
Round( e.C02_pct,3)As C02_pct, MAX( e.sample_date)As Highest_Sample_Date, d.station_name
from [HOU-TIES01].TIES_Gathering.dbo.group_detail a
Inner Join [HOU-TIES01].TIES_Gathering.dbo.station_group b on a.group_code = b.group_code
Inner Join [HOU-TIES01].TIES_Gathering.dbo.station_type c on b.station_nbr = c.station_nbr
Inner JOIN [HOU-TIES01].TIES_Gathering.dbo.station d ON c.station_nbr = d.station_nbr
Inner JOIN [HOU-TIES01].TIES_Gathering.dbo.gas_analysis e ON d.station_nbr = e.station_nbr
Where (b.station_nbr=e.station_nbr)and (b.group_code = a.group_code) and
(a.group_type = 'NPN')and( b.end_eff_date >=DATEADD(mm,DATEDIFF(mm,0,dateadd(mm,-0-datepart(day,0),getdate())),0))
and ( (c.type_code = 'WHM')or ( c.type_code = 'CRP'))and
(e.sample_date Between DATEADD(mm,DATEDIFF(mm,0,dateadd(mm,-0-datepart(day,0),getdate())),0)
and DATEADD(mm, DATEDIFF(mm,0,getdate()), 0))
and e.seq_nbr =
(select max(x.seq_nbr)
From [HOU-TIES01].TIES_Gathering.dbo.gas_analysis x
Where x.station_nbr = b.station_nbr
and x.sample_date= e.sample_date )
and e.C02_pct =
(Select max(x.C02_pct)
From [HOU-TIES01].TIES_Gathering.dbo.gas_analysis x
Where x.station_nbr = b.station_nbr
and x.sample_date= e.sample_date )
Group by a.group_code, a.group_name, a.group_note, b.station_nbr, b.beg_eff_date, b.end_eff_date, e.c02_pct, d.station_name
order by a.group_code
ok. Here is how the data looks.
Group
code station_nbr beg_eff_date end_eff_date C02 sample_date
0004 D01G000819 2007-09-01 3000-12-31 0.40 2007-10-02
0004 D01G000819 2007-09-01 3000-12-31 2.49 2007-10-09
What I am trying to do is to select the most current sample date. In this case "2007/10/09" when station_nbr and group_code are the same for both dates.
Thank You for all your help!!!!
From the Jr.in SQL
View 4 Replies
View Related
Nov 27, 2007
Hi Team:
This is a new query and I am facing a new problem. Here I am requesting all the records for a Contract Number 'GTH00001' for the specific date of 2/2/2007. I want the SUM(c.rcpt_nom_vol)AS Receipt and the b]SUM(c.rcpt_fuel)As Allocated_Fuel[/b]
But Instead I am getting 147 records for Contract Number'GTH00001'for the date of 2/2/2007.
Declare @Req_Contract_nbr char (8),
@Req_Day int,
@Req_month int,
@Req_year int
Set @Req_Contract_nbr = 'GTH00001'
Set @Req_Day = '2'
set @Req_month = '2'
Set @Req_year ='2007'
SELECT Distinct a.contract_nbr,
c.beg_eff_date, c.rcpt_dlvry_ind,
SUM(c.rcpt_nom_vol)AS Receipt, SUM(c.rcpt_fuel)As Allocated_Fuel
from dbo.contract a
Inner Join dbo.NOm b on a.contract_nbr = b.contract_nbr
Inner Join dbo.Nom_vol_detail c on c.Nom_id = b.Nom_id
where (a.contract_sub_type = 'INT') and (a.Contract_type_code ='GTH')
and (DATEADD(mm, DATEDIFF(mm,0,getdate()), 0) < a.current_expirtn_date)
and (c.rcpt_dlvry_ind ='R') and a.contract_nbr= @Req_Contract_nbr
and Day(c.Beg_eff_date) = @Req_Day
and (month(c.Beg_eff_date)= @Req_month )
Group by a.contract_nbr,c.beg_eff_date, c.rcpt_dlvry_ind, c.rcpt_nom_vol, c.rcpt_fuel
Data Example
Contract_nbr specific Date rcpt_nom_vol rcpt_fuel
GTH000012007-02-02 00:00:00.000R4.00.0
GTH000012007-02-02 00:00:00.000R8.00.0
GTH000012007-02-02 00:00:00.000R11.00.0
GTH000012007-02-02 00:00:00.000R12.01.0
GTH000012007-02-02 00:00:00.000R14.01.0
GTH000012007-02-02 00:00:00.000R15.01.0
GTH000012007-02-02 00:00:00.000R16.01.0
GTH000012007-02-02 00:00:00.000R16.02.0
GTH000012007-02-02 00:00:00.000R16.04.0
Thank you for all your help!!!!!!!!! I deeply appreciate all your help.
Osiris
The future depends of what we do in the present- Mahatma Gandhi
View 2 Replies
View Related
Mar 14, 2008
Hi
I have CheckBoxList to make my selection as follows:if (CheckBoxList2.SelectedValue == "")
{
strSelect = strSelect;
}else if (CheckBoxList2.SelectedValue == "1")if (strWhere == " where")
{strWhere = strWhere + " pic1 = 'true' ";
}
else
{strWhere = strWhere + " and pic1 = 'true' ";
}if (CheckBoxList2.SelectedValue == "2")if (strWhere == " where")
{strWhere = strWhere + " pic2 = 'true' ";
}
else
{strWhere = strWhere + " and pic2 = 'true' ";
}if (CheckBoxList2.SelectedValue == "3")if (strWhere == " where")
{strWhere = strWhere + " pic3 = 'true' ";
}
else
{strWhere = strWhere + " and pic3 = 'true' ";
}
which mean it will addor remove the fields depends upon the user selection, but it will only select one !!
Thanks in advance
View 3 Replies
View Related
May 30, 2008
Hi,
First off, let me state that i am new to ASP.net... and have had to hit the ground running... I have looked on the net but have not found a suitable explanation on how to do this.
Let me explain what i am trying to do: In my aspx page, i have 2 dropdown boxes where the user will select a skill catagory, and then a skill. Based on that selection, i would like to compute what the Service line will be. There is a primary and foreign key on CatID on the skills and SkillCat tables. This data would need to be inserted into the another table aswell, and this would need to go into a report later.
How do i go about doing this? Some examples would be greatly appreciated. And if you know of a good link, please post it for me.
Skills Table
CatID
SkillID
Skills
SL_ID
1
4
Skill 1
3
2
5
Skill 2
2
2
6
Skill 3
2
3
7
Skill 4
4
3
8
Skill 5
4
4
9
Skill 6
NULL
4
10
Skill 7
NULL
5
11
Skill 8
3
6
12
Skill 9
3
7
13
Skill 10
4
8
14
Skill 11
1
9
15
Skill 12
3
9
16
Skill 13
3
10
17
Skill 14
6
11
18
Skill 15
1
Skills Catagory
CATID
Org
Skillcat
1
Org1
Skill Category 1
2
Org2
Skill Category 2
3
Org3
Skill Category 3
4
Org4
Skill Category 4
5
Org5
Skill Category 5
6
Org6
Skill Category 6
7
Org7
Skill Category 7
8
Org8
Skill Category 8
9
Org9
Skill Category 9
Service Line Table
SL_ID
Service_line
1
Service Line 1
2
Service Line 2
3
Service Line 3
4
Service Line 4
5
Service Line 5
6
Service Line 6
7
Service Line 7
Thanks for all your help in advance.
Dash
View 1 Replies
View Related
Dec 26, 2005
Hi all techies
suppose a table contains these set of values
employeeId EffectiveDate
1 2004-12-01
2 2004-12-01
2 2005-11-15
3 2004-12-01
so
1. when i want to select data for the date ranges
(2005-12-01) to (2005-12-31), it should be
1 2004-12-01
2 2005-11-15
3 2004-12-01
2. when i want to select data for the date ranges
(2005-11-01) to (2005-11-30), it should be
1 2004-12-01
2 2004-12-01
2 2005-11-15
3 2004-12-01
3. when i want to select data for the date ranges
(2005-10-01) to (2005-10-31), it should be
1 2004-12-01
2 2004-12-01
3 2004-12-01What should I do
View 1 Replies
View Related
Dec 4, 2001
Hello Experts,
I would like to have a SQL Statement that to display all records in the same year, e.g., 2001. The date field is a mm/dd/yyyy, smalldatefield.
Could anyone advise the syntax ?
Thank you very much.
View 2 Replies
View Related
Feb 11, 2002
We are looking to purchase a new SQL2000 server.... Tada.... Right then, for around about the same money, we could have either 2 x PIII 1Ghz Xeon with 256Kb cache, or 2 x PIII 700Mhz Xeon with 1Mb cache.... Which choice is best for SQL Server 2000???
View 1 Replies
View Related
Feb 25, 2005
I hope I can explain this somewhat coherantly. Here goes..
I have a products database. I want to select product details for items having distinct style codes. IE if there are 20 products that different from one another in some way, and 3 different style numbers throughout them, I want to end up with 3 products selected. I don't care which ones, as long as i have a sample product for each style.
I've attemped to use GROUP BY to do this, but it's not giving me what I want. I managed to get right number of products, but the query seems to have mixed and matched the fields together in an undesireable way. I guess this kinda makes sense, since providing aggregate functions for each of the extra fields is necessary.
SO THE QUESTION IS: How do I select (number of distinct styles) products, and still keep the records in tact as they should be?
Here is a sample...
Code:
SELECT DISTINCT Min(team) as team, min(pict) as pict, min(colors) as colors, min(league) as league, min(product_description) as product_description, min(category) as category, min(subcategory) as subcategory, min(style) as style
FROM prods
WHERE (style='style1' or style='style2' or style='style3')
AND league='leaguex'
AND soldout=''
GROUP by style
ORDER by style
Thanks very much for any help!! I'm sure I'm going about this all wrong.
View 2 Replies
View Related
Oct 12, 2005
I want to select a date from a datetime type column.
When I use:
Select ExpireDate from myTable Where ExpireDate > 2005-10-12
...I don't get the correct dates
When I use:
Select ExpireDate from myTable Where ExpireDate > '2005-10-12'
...(with the apostrophe, it works correctly. Is there a way this will work correctly without the apostrophies?
View 1 Replies
View Related
Dec 15, 2005
Hi,
Can I assume that SQL Server 2000 will always give the result set of a simple query in the same order as the rows inserted into the table ?
Eg :
select *from test
// there is no order by statement Or TOP clause used. Just a simple select query.
Please advise,
Thanks,
MiraJ
View 5 Replies
View Related
Nov 8, 2006
this is a close question to the prior post but different
pn Amount date billingamt idc
-------------------- --------------------- ------------- ------------ -----------
a7447 .0000 2005-12-28 150.0 10
a7447 .0000 2006-01-09 150.0 11
a7447 .0000 2006-01-10 150.0 12
a7447 50.0000 2006-03-30 150.0 1
a7447 100.0000 2006-04-09 150.0 2
a7447 150.0000 2006-04-16 150.0 3
a7447 150.0000 2006-05-09 150.0 7
a7447 150.0000 2006-05-17 150.0 8
a7447 10.0000 2006-06-16 150.0 15
a7447 150.0000 2006-09-06 150.0 9
a7474 .0000 2006-04-06 185.0 4
a7474 .0000 2006-04-22 185.0 5
a7474 25.0000 2006-04-24 185.0 6
a7474 10.0000 2006-06-16 185.0 16
a7474 50.0000 2006-08-22 185.0 13
a7474 100.0000 2006-09-20 185.0 14
Ok now i need to do is i need to calculate a sum of amount field which equals or less then billingamt for each permit ordered by the date desc
meaning result items should be
a7447 150.0000 2006-09-06 150.0 9
a7474 25.0000 2006-04-24 185.0 6
a7474 10.0000 2006-06-16 185.0 16
a7474 50.0000 2006-08-22 185.0 13
a7474 100.0000 2006-09-20 185.0 14
I can deal with just a count too
as in resulting
a7447 1
a7474 4
I hope the question make sense
i couldnt find any way to do this with out of a cursor any ideas
Thanks
View 12 Replies
View Related
Aug 21, 2007
Hi everyone -
I have two tables, one table (A) that holds a field called location that
has the partial path information of the file
and the second table (B) holds the full path including the filename
I only want to display the records from the partial path (A)
table that do not reside in the second (B) table
Table A =
imagefilename, description, directory, companyname, location
"96.jpg","test","Prog2006_02","Marey, John","Prog2006_0296.jpg"
"274.JPG","disney","Prog2006_07","Amy Gross","Prog2006_07274.JPG"
"570.jpg","sdfsdf","Prog2007_06","Lof3,"Test3","Prog2007_06570.jpg"
"850.JPG","222","Prog2007_08","Malis, Mark","Prog2007_08850.JPG"
Table B =
imagefilename
"d:webdatawebuploadsqfimagesProg2006_0296.jp g"
"d:webdatawebuploadsqfimagesProg2006_03112.p df"
"d:webdatawebuploadsqfimagesProg2006_03127.j pg"
I was thinking about using a cross join with a like condition,
but it fails (go figure)
could someone offer a little help to the query that i need to
perform??
thanks
tony
View 6 Replies
View Related
Apr 14, 2008
This is my sql query
Select DOJ AS 'JoiningDate' from emp where DOJ like '%2008/09/04%'
there are 8 records on this time.But it displays no result .
The column is datetime datatype
year month date or we need to mention any thing other than this.
View 5 Replies
View Related
Jun 13, 2008
SELECT a.Network_ID, b.Last_Name + ', ' + b.Preferred_FirstName AS full_name, c.Security_Class_Description,
d.Security_Type_Description, a.Security_Value
FROM Company_Hierarchy_Security a
JOIN V_Entity_Employee_Active b on a.Network_ID= b.Network_ID
JOIN Company_Security_Class c on a.Security_Class_Code=c.Security_Class_Code
JOIN Company_Security_Type d on a.Security_Type = d.Security_Type
inner join (select e.Budget_Center_ID + ' - ' + e.Budget_Center_Description As Budget_Center_Description,
f.Company_Name, g.Enterprise_Description, h.Business_Segment_Description,
i.Team_Description
from Company_Hierarchy_Security a.
Inner JOIN Budget_Center e on a.Security_Value = e.Budget_Center_ID
Inner JOIN Company f on a.Security_Value = f.Company_ID
Inner JOIN Enterprise g ON a.Security_Value = Cast(g.Enterprise_Number As Varchar(5))
Inner JOIN Business_Segment h on a.Security_Value = h.Business_Segment_ID
Inner JOIN Team i on a.Security_Value = i.Team_ID
Ok. I have the Security Value located in Company_Hierarchy_Security table. All those values are divided into 5 other tables that I need to join together. I found all of them separate but I have not been able to figue it out how to put it together with the rest of the querie.
Thanks for the help!!!!!
View 3 Replies
View Related
Jun 16, 2008
Thank You visakh16 --- The following section of my querie works but doesn't give the exact information that I need. This is what is giving me:
NetworkId Full Name Sec Class Desc Sec Type Desc SecValue
tte Test Scenario Accounting Budget Center 142- ?
SELECT a.Network_ID, b.Last_Name + ', ' + b.Preferred_FirstName AS full_name, c.Security_Class_Description,
d.Security_Type_Description, a.Security_Value
FROM Company_Hierarchy_Security a
JOIN V_Entity_Employee_Active b on a.Network_ID= b.Network_ID
JOIN Company_Security_Class c on a.Security_Class_Code=c.Security_Class_Code
JOIN Company_Security_Type d on a.Security_Type = d.Security_Type
------------------
inner join (select e.Budget_Center_ID + ' - ' + e.Budget_Center_Description As Budget_Center_Description,
f.Company_Name, g.Enterprise_Description, h.Business_Segment_Description,
i.Team_Description
from Company_Hierarchy_Security a.
Inner JOIN Budget_Center e on a.Security_Value = e.Budget_Center_ID
Inner JOIN Company f on a.Security_Value = f.Company_ID
Inner JOIN Enterprise g ON a.Security_Value = Cast(g.Enterprise_Number As Varchar(5))
Inner JOIN Business_Segment h on a.Security_Value = h.Business_Segment_ID
Inner JOIN Team i on a.Security_Value = i.Team_ID
_____________________________________________________________________
What I need is the Description that are located in 4 other different tables that matches the Security Value from my first querie.
The result should look like this...
Network Id full Name Sec Class Desc Sec Type Desc Security Value
tst , Test Example , Accounting ,Budget Center , 142-Accountig dept
Thank you very much,
View 4 Replies
View Related
Jan 12, 2006
i need some help
i have a database which has single column containing 10,000 records.
i enter a number say 1000.
so it divides the 10,000 records into 10 different column containing
1000 record each.how do i do it?
View 2 Replies
View Related
Jan 27, 2006
Hi,
While playing with SQL Server 2000 I found you can specify the selection criteria in either the FROM clause or the WHERE clause:
e.g.
select *
from Table1 a inner join Table2 b ON a.key = b.key and a.field = 1
Is logically the same as:
select *
from Table1 a inner join Table2 b ON a.key = b.key
where a.a = 1
Any comments on which is best, and why?
Thanks,
Chris
View 3 Replies
View Related
Sep 21, 2006
Hi All
Being new to this forum and to SQL, I would to apologise upfront for my clumsy code and explanations as I try and get to grips with this subject.
I have created this query which does work:
SELECT T1.U_Serial,
case
when (U_RDate < GETDATE() AND U_ASDate Is NULL)
then 'NA'
when (U_RDate Is NULL)
then 'No Request'
when (U_ASDate Is Not NULL And U_AEDate Is NULL)
then 'NA'
when (U_ASDate Is Not NULL And U_AEDate Is Not NULL)
then 'A'
when (U_RDate > GETDATE() AND U_ASDate Is NULL)
then 'NA'
else 'DN'
end As Available,
case
when (U_RDate < GETDATE() AND U_ASDate Is NULL)
then 'Late'
when (U_RDate Is NULL)
then 'No Request'
when (U_ASDate Is Not NULL And U_AEDate Is NULL)
then 'Busy'
when (U_ASDate Is Not NULL And U_AEDate Is Not NULL)
then 'Done'
when (U_RDate > GETDATE() AND U_ASDate Is NULL)
then 'Waiting'
else 'DN'
end As Progress,
T1.U_Status,T1.U_JobTp, T1.U_JobNr,T1.Code, T0.U_CardNM, T0.U_ZpCd, GETDATE() as Today, T1.U_RDate, T1.U_ASDate, T1.U_AEDate, T1.U_ItemCd, T1.U_ItemDsc
FROM [dbo].[@IDH_JOBENTR] T0 , [dbo].[@IDH_JOBSHD] T1
WHERE T0.Code = T1.U_JobNr AND T1.U_Serial not like ''
ORDER BY T1.U_Serial, T1.U_AEDate DESC, T1.U_JobNr DESC ,T1.Code DESC,Today, T1.U_RDate, Available, Progress, T1.U_Status,T1.U_JobTp,T0.U_CardNM, T0.U_ZpCd, T1.U_ASDate, T1.U_ItemCd, T1.U_ItemDsc
The tables I’m using are IDH_JOBENTR which is the header records for my jobs and IDH_JOBSHD, which holds the row details for the jobs.
I’m trying to extract from the IDH_JOBSHD table the last (row) detail record for the (header) job.
The way the query works now, the first row for each unique serial number is the record I need, but this is all the info I would like to display I don’t need the other lines, and I don't know how to strip out the rest of the data
I hope this make sense.
Kind regards
Hayden
View 7 Replies
View Related
Nov 24, 2006
i am having problems selecting by date. I have made sure that the datetime field only contains dates with the time set to 00:00:00
In this instance both it should return one record dated 24/11/2006 00:00:00 but it returns a record with the date 25/11/2006 00:00:00 can someone expain why thi is.
Thanxs
WHERE(Tbl_01020_Tour_Types.TourTypeId = @TourTypeId) AND
(Tbl_01030_Tour_Schedule.Sch_TourStartDate <= CONVERT(DATETIME, CONVERT(INT,GETDATE()))) AND
(Tbl_01030_Tour_Schedule.Sch_TourEndDate >= CONVERT(DATETIME, CONVERT(INT, GETDATE())))
View 20 Replies
View Related
Jun 10, 2007
I have this query:
Select
field1, field2
from table1
left
table2 where chdate = AAAAMMGG (a variable I type
whenever I run the query).
Now I want to change the command in red as follows:
where chdate = AAAAMMGG or (if AAAAMMGG is null) the last date
before AAAAMMGG that is not null.
Is there a command called 'MAX' or something like that?
Thank you.
Anna - Verona (Italy)
Thank you.
Anna - Verona (Italy)
View 4 Replies
View Related
