Why Recordsets
Aug 8, 2005why should one use Recordsets and not SQL itself in database work. Isn't the latter muvch faster, more portable, and needs to be learnt only once?
View 1 Replies
ADVERTISEMENT
How To Concatenate Recordsets
Aug 31, 2007is it possible to concatenate 2 recordsets ? i have 2 select, and i need then to be displayed one after other.using union all the results are gathered, ordered like only one select.thanks for all
View 5 Replies View RelatedMultiple Recordsets
Mar 16, 2001Is it possible to return multiple recordsets from SQL to ASP in a single query?
TIA
Pilot
Returning One Of Three Recordsets
Jun 21, 2007Hi all,
I've written a query which needs to return different records depending on its argument.
I've used an IF statment to test which of the three SELECT statments should be returned. However, when I try to access the data from VBA in Access I find that the recordset is empty, whereas the query returns thr correct data if I run it in the SQL environment. WHy is this? More importantly, how do I make it return records?
Code:
ALTER PROC [dbo].[spFilteredContractListByUser]
@UserID varchar(7) --The user's 'T' number
AS
PRINT 'User ID is' + @UserID
--Get this user's filter type from tbl
DECLARE @FilterType int
SELECT @FilterType = FilterID
FROM tblFindContractUserFilter
WHERE UserID = @UserID
-- Standard filter
-- Returning all queries matching the username
IF @FilterType = 1
BEGIN
SELECT DISTINCT [Acc No], Business, Type, [Log Date], [Logged By], [Ack. Date], [Ack. By], [Late?]
FROM qryQueriesWorkList
WHERE (suser_sname = @UserID)
END
ELSE IF @FilterType = 2
-- Return only queries acknowledged by @UserID
BEGIN
SELECT DISTINCT q.[Acc No], q.Business, q.Type, q.[Log Date], q.[Logged By], q.[Ack. Date], q.[Ack. By], q.[Late?]
FROM qryQueriesWorkList q
WHERE (q.[Ack. By] = dbo.getEmployeeName(@UserID))
END
ELSE IF @FilterType = 3
-- Return all the queries which have not been acknowledged
BEGIN
SELECT DISTINCT q.[Acc No], q.Business, q.Type, q.[Log Date], q.[Logged By], q.[Ack. Date], q.[Ack. By], q.[Late?]
FROM qryQueriesWorkList q
WHERE (q.[Ack. By] IS NULL)
END
The VBA code is:
Code:
rst.Open ("EXEC spFilteredContractListByUser '" & Me.cmbUserFilter.Value & "'")
Me.cmbUserFilter.Value contains the argument.
Thanks all
Dave
Nested Recordsets
Nov 19, 2004I need to decrease the amount of time it takes to return a set of data of the following format:
State[Provided vai user intput]->All Counties in State->All Cities in County->All Zones in City[usually < 50 or 75 per city]
current behavior:
1. currently user selects state all counties are returned from db
2. foreach county cities are returned
3. foreach city streets are returned
4. objects hydrated with data & display drawn
As you can see this gets expensive. I know there has to be a better way to do this. Any suggestions? We use sql server/c#.net.
How To Concatenate 2 Recordsets
Aug 31, 2007is it possible to concatenate 2 recordsets ?
i have 2 selects and i want to display all results from the first
select and then the results from the second select query
with paging.
if i use union, all the results will be mixed.
thanks for the help!
Passing Recordsets
Sep 26, 2007Greetings,
I'm having SSIS block right now and thought I'd see if anyone had a simple solution to this.
What I have is SSN data coming in from several different tables, which needs to be inserted into a SurrogateSSN table which just uses an Identity field for the surrogate.
I normally build a seperate package for each detination table, so in each package that has SSN data in the source, I need to insert into the SurrogateSSN table (then I can use the surrogate values later in my package).
What I'm looking for is a simple solution if possible (preferrable using existing non-script tasks, or very short script), where I can pass in the SSN. Is there way to create a package that will accept a recordset (of SSN's) for this insert, that I can call from several different packages, and pass in the recordset of SSN's?
Thanks for your ideas
How Can I Use The Last Recordset In A SP That Return 3 Recordsets ?
Mar 9, 2005Hello,
I have a SP1 that is calling another SP2,
SP2 is using select and returning records
So in SP1 I get 3 different record sets
(as I can see it on Query Analyzer - one after the other)
When I'm trying using the ASP page I get this error:
"Item cannot be found in the collection corresponding to the requested name or ordinal."
How can I access the last recordset ?
Browser Updateable Recordsets ?
Mar 26, 2000I think it whould be simpler to explain what I am trying to accomplish.
I wish to pull a query to return multiple records from a SQL 7.0 database.
The query is a customers standing order.
I wish to make edits to multiple records then return those records for update.
The HTML pages that I have seen all seem to display tables on a singular record format.
Is it possible to display records in a 'Table' format and allow it to be updated.
Can any one answer this or direct me to a site with the relevent info.
Thanks Stuart
Indtec@eircom.net
How To Output Multiple Recordsets On One Row Using SQL?
Nov 8, 2001Hello Folks,
Using just SQL (within SQL Server 2000), I'm looking to output 2 (or more) recordsets from a one-to-many join between table all on one row. Help! Can someone please show me how to do this if it can be done.
Below is an example of the situation.
Thanks a lot folks, - Jerry
************* Tables *******************
** ITEMS **
ItemID
=======
10
11
12
** ITEMSTOPARTS **
ItemID ---- PartID ---- Funktion
=================================
10 -------- 100 ------- headlight
10 -------- 120 ------- taillight
** PARTS **
PARTID ---- Manf ---- ProductName
=================================
100 ------- M1 ------ Halogens
120 ------- M2 ------ Red Lights
************* Queries *******************
-- QUERY 1 --
==============
(dashes preserve indentation)
SELECT
- i.itemID AS ItemID,
- p1.partID AS HLPartID,
- p1.manf AS HLManf,
- p1.name AS HLName,
- p2.partID AS TLPartID,
- p2.manf AS TLManf,
- p2.name AS TLName
FROM - ZItems i
- - - - INNER JOIN ZItemsToParts ip
- - - - - - ON i.itemID = ip.itemID AND
- - - - - - (ip.funktion = 'headlight' OR
- - - - - - ip.funktion = 'taillight') AND
- - - - - - i.itemID = 10
- - - - LEFT OUTER JOIN ZParts p1
- - - - - - ON ip.partID = p1.partID AND
- - - - - - ip.funktion = 'headlight'
- - - - LEFT OUTER JOIN ZParts p2
- - - - - - ON ip.partID = p2.partID AND
- - - - - - ip.funktion = 'taillight'
************* Output *******************
Using "Query 1" I get this:
(Note: HL = Headlight; TL = Taillight)
ItemID - HLPartID - HLManf - HLName --- TLPartID - TL Manf - TL Name
================================================== ==============
10 ----- 100 ------ M1 ----- Halogens - NULL ----- NULL ---- NULL
10 ----- NULL ----- NULL --- NULL ----- 120 ------ M2 ------ Red Lights
I wish to output the proceeding two record set in one row
Any ideas how this can be done with SQL Server 2000
(with JOINS in the FROM clause)?
- DESIRED OUTPUT:
ItemID - HLPartID - HLManf - HLName --- TLPartID - TL Manf - TL Name
================================================== =============
10 ----- 100 ------ M1 ----- Halogens - 120 ------ M2 ------ Red Lights
-= End-O-Message =-
Paging Large Recordsets
Oct 21, 2007Here's a question you'll never quit hearing: is there a convenient way to page through large recordsets in SQL Server 2000?
I'm writing some software which, for all intents and purposes, works like a messageboard: users can create threads, leave replies, and so on.
I have about a half million records in a few of my tables, and some of my queries return 1000s of results. I'd prefer not to return 1000s of records all at once, so I don't want to page my records in code; I'd rather page them in SQL Server. Naturally, I want to page replies. However, I don't know of a convenient way to page records in SQL Server 2000.
Opening Mulitple Recordsets
Jul 20, 2005I have a single .asp page that opens a connection and then sequentiallyopens and closes 14 recordsets from stored procedures to obtain variousproduct information before closing the connection.Is it common practice to do something like this? Or is opening 14recordsets going to become a real problem when the page goes live and startsgetting high web traffic?Thank you in advance for any information you might provide.Dave
View 2 Replies View RelatedAsp / Sql Server Dates In Recordsets
Jul 20, 2005Hey,I've got an Classic ASP app pulling some records out of a DB, whichworked fine when it was Access. When we upped to SQL Server, all of asudden, when the Recordsets came back, all the dates were empty, eventhough the data was showing up in the DB.About a year ago (only code asp apps once and a while), I rememberseeing this and finding something that just had something to do with theorder in which something was being referenced, but I just can't for thelife of me remember what it was.The Dates are set as datetime, length of 8.Anyone know why this happens and a solution?many thanks,rob
View 1 Replies View RelatedClosed Recordsets From Stored Procedures
Jun 18, 2001Hello all,
I'm writing some stored procedures that first do an Insert or an Update, and then also do a Select to return a Recordset back to an ADO client. However an Insert or Update causes a closed recordset to be produced in ADO. I can skip over the closed recordset with the NextRecordset method.
So the question is, is there any way of stopping the closed recordset being returned? I don't want to have to call the NextRecordset method from ADO as this would mean that the client would need to know about the implementation of the stored procedure.
Has anyone got any ideas on how to get round this?
Thanks
Dave Sykes
@@IDENTITY Problem With Multiple Recordsets
Apr 24, 2008Can anyone help with this problem.
I am doing some mods to an existing db web app in asp. I am providing a facility to copy a subset of related records in a few tables. I am using one recordset to read in the selected records and then copying the data into another recordset creating a new record in the same table. I have to then pick up the @@IDENTITY of the new record so that I can update linked records in other tables.
The @@IDENTITY value returned is null unless I close the selection recordset.
I have created a simplified version of the code to demonstrate this.
The underlying table is called 'test' and it has 2 fields, 'test_id', integer, identity and 'test_desc' varchar(50)
ASP Code
<%
dim objConn, objRS1, objRS2, objRS3
sub OpenDatabase()
'open database object here instead of in page
Set objConn = Server.CreateObject("ADODB.Connection")
'Connect object to database through global.asa application variable
objConn.Open = Application("test_ConnectionString")
'Create recordset object to use
Set objRS1 = Server.CreateObject("ADODB.Recordset")
Set objRS2 = Server.CreateObject("ADODB.Recordset")
end sub
sub CloseDatabase
Set objRS1 = Nothing
Set objRS2 = Nothing
objConn.Close
Set objConn = Nothing
end sub
function UnNull(numval)
if isnull(numval) then
UnNull="NULL"
else
UnNull=cstr(numval)
end if
end function
OpenDatabase
strSQLQuery = "select * from test where test_id in (1,2) order by test_id"
objRS1.Open strSQLQuery, objConn, 1, 3
do while not objRS1.eof
objRS2.Open "test", objConn, 1, 3
objRS2.AddNew
old_test_id = objRS1("test_id")
objRS2("test_desc") = objRS1("test_desc")
objRS2.Update
objRS2.Close
' *1 objRS1.Close
strSQLQuery = "select @@IDENTITY as new_id"
objRS2.Open strSQLQuery, objConn
new_test_id=objRS2("new_id")
objRS2.close
response.write("Old ID = " & UnNull(old_test_id) & ", New ID = " & UnNull(new_test_id))
response.write("<p>")
' *2 response.end
objRS1.movenext
loop
objRS1.close
CloseDatabase
%>
Output
Old ID = 1, New ID = NULL
Old ID = 2, New ID = NULL
If I unrem the lines *1 and *2 then the output is
Old ID = 1, New ID = 11
I realise that there are other ways of doing this but this is only a simplified example whereas the actual application is far more complicated.
Thanks is advance
Kennedy
Delete Recordsets With Same Date And Line
Jul 23, 2005Hi All!I need help with a Statement!I am working with an Access2000 DB.I have the following Problem.ChNrLinieDatum Code 39 Stückzahl BHL1 BHL2 BMRH582-064L2.1008.03.2005 02:30:00FCAA14821701582-064L2.1008.03.2005 02:30:00FCAA14871701582-114L2.1208.03.2005 01:00:00FAC827501240582-114L2.1208.03.2005 01:00:00FAC827441240582-114L2.1208.03.2005 01:00:00FAC827501240582-094L2.707.03.2005 19:45:00FAE74323481582-094L2.707.03.2005 19:45:00FAE74489481582-094L2.707.03.2005 19:45:00FAE74489481581-294L2.807.03.2005 18:20:00FA8V2658221581-294L2.807.03.2005 18:20:00FA8V2652221581-294L2.807.03.2005 18:20:00FA8V2658221582-114L2.1207.03.2005 17:45:00FAAR20721236As you can see I have a few recordsets that are double. The Thing is, thereis an ID that makes them different.I need a Statement that deletes the surplus records where 'Datum' and'Linie' are identical to another record. 1 record has to remain of course.I thought of something like this.DELETE FROM tbAuswertWHERE EXISTS(SELECT *FROM tbAuswertWHERE (Linie AND Datum)IN (SELECT Linie AND Datum AS SuchkritFROM tbAuswertGROUP BY SuchkritHAVING ((Count(Suchkrit)>1)))But I get an error:You wanted to execute a Query that did not have the following expression'Not Linie = 0 And Not Datum = 0' in its AggregatefunctionPerhaps you ccan help me.ThanksJulia--Message posted via http://www.sqlmonster.com
View 3 Replies View RelatedEmpty Recordsets And Artificial Records
Jul 5, 2006I'm currently running the following statement that is used in a CrystalReport. Basically, a record is returned when the T_PAYMENT.amounthas a record in the database based on the value of the T_MULTILIST.codefield. Currently, if there is no record returned, there is no listingin the report for the given T_MULTILIST.code.The user now wants a record to be displayed on the report when there isno record in the database - she wants it to display a value of '$0'for the given T_MULTILIST.code record. I tried to explain the fact thatis not possible the way things stand at the moment. Basically I needsome typeof case statement that says 'if there is no record returned, create asingle record and set T_PAYMENT.amount = 0' AFTER each query has beenexecuted.Anyone have any idea how to accomplish this?SELECT DISTINCT'English Language Arts, Grade 1' as Rec_Type, 'English Language Arts(Consumable)' as Super_Type, '' as Other_Type, 'Continuing Contracts'as Proc_Type,T_MULTILIST_GRADE.grade, T_MULTILIST.description, T_MULTILIST.code,T_PAYMENT.amountFROM (T_MULTILIST T_MULTILIST INNER JOIN (T_PAYMENT T_PAYMENTINNER JOIN T_SHIPPING_DETAILT_SHIPPING_DETAIL ONT_PAYMENT.transaction_id=T_SHIPPING_DETAIL.transac tion_id)ON T_MULTILIST.code=T_SHIPPING_DETAIL.multilist_code) INNER JOINT_MULTILIST_GRADE T_MULTILIST_GRADE ONT_MULTILIST.code=T_MULTILIST_GRADE.multilist_code, T_ORDER, T_REQUISITION, T_REQUISITION_DETAILWHERET_ORDER.id = T_SHIPPING_DETAIL.order_id ANDT_REQUISITION.id = T_ORDER.requisition_id ANDT_REQUISITION_DETAIL.requisition_id = T_REQUISITION.id ANDT_REQUISITION_DETAIL.latest_record_flag = 1 ANDT_REQUISITION.latest_record_flag = 1 ANDT_ORDER.latest_record_flag = 1AND (T_MULTILIST.code='1040')AND (T_MULTILIST.expiration_year >= '2006' )AND (T_REQUISITION.requested_shipment_date >= '2006' + '0601'AND T_REQUISITION.requested_shipment_date < dateadd(YY, 1,'2006' + '0601' ) )UNIONSELECT DISTINCT'English Language Arts, Kindergarten' as Rec_Type, 'EnglishLanguage Arts (Consumable)' as Super_Type,'' as Other_Type, 'Continuing Contracts' as Proc_Type,T_MULTILIST_GRADE.grade, T_MULTILIST.description,T_MULTILIST.code, T_PAYMENT.amountFROM (T_MULTILIST T_MULTILIST INNER JOIN (T_PAYMENT T_PAYMENTINNER JOIN T_SHIPPING_DETAIL T_SHIPPING_DETAILON T_PAYMENT.transaction_id=T_SHIPPING_DETAIL.transac tion_id)ON T_MULTILIST.code=T_SHIPPING_DETAIL.multilist_code) INNER JOINT_MULTILIST_GRADE T_MULTILIST_GRADE ONT_MULTILIST.code=T_MULTILIST_GRADE.multilist_code, T_ORDER, T_REQUISITION, T_REQUISITION_DETAILWHERET_ORDER.id = T_SHIPPING_DETAIL.order_id ANDT_REQUISITION.id = T_ORDER.requisition_id ANDT_REQUISITION_DETAIL.requisition_id = T_REQUISITION.id ANDT_REQUISITION_DETAIL.latest_record_flag = 1 ANDT_REQUISITION.latest_record_flag = 1 ANDT_ORDER.latest_record_flag = 1AND (T_MULTILIST.code='0040')and (T_MULTILIST.expiration_year >= '2006' )AND (T_REQUISITION.requested_shipment_date >= '2006' + '0601'AND T_REQUISITION.requested_shipment_date < dateadd(YY, 1,'2006' + '0601' ) )Up to 40 more UNION statements follow the above 2.
View 3 Replies View RelatedRotating Information From Recordsets To Columns.
Jul 20, 2005Hello,This problem perplexes me and I hope that someone has done somethingefficient.Take for example the data in the MASTER..SYSPERFINFO:SELECTCAST(RTRIM(INSTANCE_NAME) AS VARCHAR(15)),CAST(RTRIM(COUNTER_NAME) AS VARCHAR(31)),CAST(RTRIM(CNTR_VALUE) AS VARCHAR(10))FROM MASTER..SYSPERFINFOWHERE INSTANCE_NAME = N'TEMPDB'tempdb Data File(s) Size (KB) 51200tempdb Log File(s) Size (KB) 1272tempdb Log File(s) Used Size (KB) 738tempdb Percent Log Used 58tempdb Active Transactions 0tempdb Transactions/sec 186281tempdb Repl. Pending Xacts 0tempdb Repl. Trans. Rate 0tempdb Log Cache Reads/sec 0tempdb Log Cache Hit Ratio 0tempdb Log Cache Hit Ratio Base 0tempdb Bulk Copy Rows/sec 0tempdb Bulk Copy Throughput/sec 0tempdb Backup/Restore Throughput/sec 0tempdb DBCC Logical Scan Bytes/sec 0tempdb Shrink Data Movement Bytes/sec 0tempdb Log Flushes/sec 1578tempdb Log Bytes Flushed/sec 67882496tempdb Log Flush Waits/sec 226tempdb Log Flush Wait Time 47tempdb Log Truncations 248tempdb Log Growths 3tempdb Log Shrinks 0<I did the CAST and LTRIM so that it looks better when displayed in abrowser>I would like to keep statistics in a table with the following columns:INSTANCE_NAME,DATA_FILE_SIZE,LOG_FILE_FIZE,ACTIVE_TRANS,TRANS_PER_SECSo, instead of having a table with three columns and 23 rows(only 4 ofwhich I want), I would have a single row with 4 columns(plus theInstance_Name).Visualy, I want to call this a 90 degree rotation. Here's what theselect statement would then look like:SELECT *FROM SYSPERFINFO_ARCHIVEWHERE INSTANCE_NAME = N'TEMPDB'Here's the result set:tempdb 51200 1272 0 185198Is it possible to 'rotate' a recordset into columns?How would it be done?Gracias.
View 2 Replies View RelatedUnable To Merge Two Stand-alone Recordsets
Jul 4, 2007
I have two stand-alone recordsets. They have the exactly the same fields definitions. They come from different ADODB connections (Microsoft Jet). And I cannot merge them into one recordset.
I was trying to merge the second recordset into the first, but instead of adding the records, the first recordset becomes populated with infinite copies of the first record of the second recordset. This seems to me a VB6 bug.
Any help on how to go around this problem will be really appreciated. Thanks a lot. Frank
This is the code:
(Please note, the INVENTORY table contains different data but has the same structure in both databases.)
Code Snippet
Dim S1ADO As New ADODB.Connection
Dim S2ADO As New ADODB.Connection
S1ADO.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=Z: [...]"
S2ADO.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=Y: [...]"
RS1.Open INVENTORY, S1ADO, adOpenDynamic, adLockOptimistic
RS2.Open INVENTORY, S2ADO, adOpenDynamic, adLockOptimistic
RS2.MoveFirst
While Not RS2.EOF
RS1.AddNew
For A=0 to RS1.Fields(A).Count - 1
RS1.Fields(A).Value = RS2.Fields(A).Value
Next
RS1.Update
RS2.MoveNext
Wend
After Moving To SQL2005, Disconnected Recordsets Are Ready-only
Feb 16, 2006We're using ADO disconnected recordsets. On SQL 2000, we could update these on the client (without propagating the changes to the server) even if the underlying view or table was non-updatable.
When running our apps against SQL 2005 (using the same client-side environment), we can no longer change any attributes of those disconnected recordsets, that connect to a non-updatable database object (the rest of the app runs fine, we can update all updatable database objects through disconnected recordsets) . Does SQL 2005 respond to such calls differently from SQL 2000, so that ADO recordsets are built in a new way (which makes them read-only in our setting)?
Thanks for any suggestions.
Rene
Report From Prcedure That Return Multiple Recordsets
Feb 11, 2007Hi there,
I am creating a report from a stored procedure that returns
multiples record sets. For an example, my stored procedure is as follows
CREATE PROCEDURE MYPROCEDURE
AS
BEGIN
SELECT * FROM TABLE1
SELECT * FROM TABLE2
SELECT * FROM TABLE3
END
Now lets say I want to create a report that will display the
result of the query no 2 (which is SELECT * FROM TABLE2 in this example). How
can I do this? Is there any way to bind the second record set to the report
dataset with out changing the stored procedure?
I will appreciate any kind of suggestions on this
Thanks
Moim
SQL7 + Stored Proc's = Files [Persistant Recordsets]
Oct 10, 2000Hi,
I was wondering, is there any way to have a stored procedure write to a file its resultant recordset?
i.e. I have this SP which fires a query, this in turn returns a single row recordset that I need to have written to a file. I realise this could easily be facilitated using an ADO client, however, can it be done by the backend i.e. the SQL7 & SP itself, directly?
I hope you can help me here! thanks for your time!
Cheers
Gaurav
Inserting Few Recordsets Into Temp Table Containing NULL Values
Jul 20, 2005HiI need some help on achieving the following:I wrote a querie which collects Data out of three Tables, the Resultlooks like this:SET NOCOUNT ONDECLARE @ROWINTDECLARE @CURPTNO CURSORSET @CURPTNO = CURSORFORSELECT * FROM TEMPOPEN @CURPTNOFETCH NEXT FROM @CURPTNOINTO @ROWWHILE (@@FETCH_STATUS = 0)BEGINSELECT ONE.CYNO, ONE.ROLE, ONE.ROL_BEZ, ONE.PTNO, ONE.NOCY, TWO.TEXTAS NOCY_TEXTFROM(SELECT CY.CYNO,RE.CYNO AS RECYNO, RTRIM(RE.ROLE) AS ROLE, RTRIM(V_ROLE.TEXT) ASROL_BEZ,RE.PTNO AS PTNO, RTRIM(RE.NAME) AS SACHBEARBEITER, RE.NOCYFROM CYRIGHT OUTER JOINRE ON RE.CYNO = CY.CYNOINNER JOINV_ROLE ON RE.ROLE = V_ROLE.CODEWHERE (RE.PTNO IN(SELECT PT.PTNOFROM PTWHERE PT.PTNO IN(@ROW)AND V_ROLE.LANGUAGE = PT.CLANG))) AS ONELEFT JOIN(SELECT V_NOCY.CODE, V_NOCY.TEXTFROM V_NOCYINNER JOINPT ON PT.CLANG = V_NOCY.LANGUAGEAND PT.PTNO IN (SELECT PT.PTNOFROM PTWHERE PT.PTNO IN(@ROW))) AS TWOON ONE.NOCY = TWO.CODEFETCH NEXT FROM @CURPTNOINTO @ROWENDCLOSE @CURPTNODEALLOCATE @CURPTNOThe Result looks like this:RS1:6313,1300,Architekt,99737505,NULL,NULL2392762,100,Bauherr,99737505,NULL,NULLRS2:2693265,100,Bauherr,99756900,NULL,NULLNULL,1,Planer,99756900,2,Bauherr macht Pläne selberRS3:2691919,100,Bauherr,99755058,NULL,NULL2691962,6000,Kontakt,99755058,NULL,NULLMy Problem is, that I need to have all the Resultsets in one Table atthe end.So my further undertaking was to create a Temp Table with theexpectation to receive all the resultsets in one Step.The TSQL for this looks like that:SET NOCOUNT ONCREATE TABLE #CYRE_TEMP(CYNOINT NULL,ROLEINT NULL,ROL_BEZVARCHAR (60) NULL,PTNOINT NULL ,NOCYINT NULL,TEXTVARCHAR (60) NULL)GODECLARE @CYNOINT,@ROLEINT,@ROL_BEZVARCHAR (60),@PTNOINT,@NOCYINT,@TEXTVARCHAR (60),@ROWINT,@CURPTNOCURSORSET @CURPTNO = CURSOR FORSELECT PTNO FROM TEMPOPEN @CURPTNOFETCH NEXT FROM @CURPTNOINTO @ROWWHILE (@@FETCH_STATUS = 0)BEGININSERT INTO #CYRE_TEMP (CYNO, ROLE, ROL_BEZ, PTNO, NOCY, TEXT)VALUES(@CYNO,@ROLE ,@ROL_BEZ ,@PTNO ,@NOCY ,@TEXT)SELECT @CYNO = ONE.CYNO,@ROLE = ONE.ROLE,@ROL_BEZ = ONE.ROL_BEZ,@PTNO = ONE.PTNO,@NOCY = ONE.NOCY,@TEXT = TWO.TEXTFROM(SELECT CY.CYNO, RTRIM(RE.ROLE) AS ROLE, RTRIM(V_ROLE.TEXT) ASROL_BEZ,RE.PTNO AS PTNO, RTRIM(RE.NAME) AS SACHBEARBEITER, RE.NOCYFROM CYRIGHT OUTER JOINRE ON RE.CYNO = CY.CYNOINNER JOINV_ROLE ON RE.ROLE = V_ROLE.CODEWHERE (RE.PTNO IN(SELECT PT.PTNOFROM PTWHERE PT.PTNO =@ROWAND V_ROLE.LANGUAGE = PT.CLANG))) AS ONELEFT JOIN(SELECT V_NOCY.CODE, V_NOCY.TEXTFROM V_NOCYINNER JOINPT ON PT.CLANG = V_NOCY.LANGUAGEAND PT.PTNO IN (SELECT PT.PTNOFROM PTWHERE PT.PTNO =@ROW)) AS TWOON ONE.NOCY = TWO.CODEFETCH NEXT FROM @CURPTNOINTO @ROWENDCLOSE @CURPTNODEALLOCATE @CURPTNOSELECT * FROM #CYRE_TEMPDROP TABLE #CYRE_TEMPGOAnd the Output looks like this now:Q1:NULL,NULL,NULL,NULL,NULL,NULL2392762,100,Bauherr,99737505,NULL,NULLNULL,1,Planer,99756900,2,Bauherr macht Pläne selberCan someone help me getting all the 6 Rows into one Table as Output?I appreciate any available Help on this..Ssscha
View 1 Replies View RelatedOutput Parameters Versus Recordsets In Stored Procedures
Jul 20, 2005I've read that stored procedures should use output parameters instead ofrecordsets where possible for best efficiency. Unfortunately I need toquantify this with some hard data and I'm not sure which counters touse. Should I be looking at the SQL Server memory counters or somethingelse.*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedAccess 2003 / SQLSEE 2005 - Using Forms To Filter Recordsets
Aug 7, 2006I upsized an Access 2003 database to SQL Server Express Edition 2005, and have converted all tables, queries, reports and macros successfully so far. The snag I'm running into involves using macros embedded in buttons on certain forms using Access as the frontend.
With these forms, the idea is to navigate to a certain record, and hit a button to bring up a print preview view of a report. Based on the record you're looking at in the form, it should check against the data in the table to which it refers, and pull up a single record in the report.
In access as a standalone, using the OpenReport command, the code was as follows:
[MRB Report Data]![MRB Report Number]=[Forms]![MRB Data Input]![MRB Report Number]
MRB Report Data is the table containing data, and MRB Report Number is the primary key (autonumber). MRB Data Input is the form in question, and the second MRB Report Number is the control field that references back to the MRB Data Input table.
When I try to run this using Access as a frontend, an error occurs at the first '!' - is there a different syntax I need to specify to reference a form in this case?
Thanx in advance.
Current Provider Does Not Support Returning Multiple Recordsets From A Single Execution
Jun 14, 2007Hi all -
I know this is prolly an old one but I would certainly appreciate some assistance =)
environment:
SERVER (IIS6, .NET2.0, SQL2005)
CLIENT (WIN2000,IE6,VBScript)
I have an aspx that is invoking ado on the clientside. I read somewhere that javascript does not support connecting to SQL clientside. I may be wrong. In any case I am using VBScript on the client.
I am using something like this to invoke the script
Code Snippet
<a href="#" onclick="doReport()">Click Here</< FONT>a>
doReport() looks something like this ...
Code Snippet
' ========================================================
sub doReport()
Dim stSQL, rs, oWord, oDoc, oRng
Dim stCurrentSection, stTemplatePath, dtNow, dtSOR, dtLastDataPoint
Dim iLastDataPoint
set oWord = CreateObject("Word.Application")
stTemplatePath = "http://crivm-ccdev/ccprocharts/supportfiles/CCWordReport.doc"
set oDoc = oWord.Documents.Open(stTemplatePath)
oWord.visible = true
stCurrentSection = "a"
loadDebug
'loadLive
openConnection()
' == THIS DB CALL GETS 2 RESULT SETS
'set rs = getrsCustomerInfoReport(mstUnits, left(mstCycles,3), mstAppName)
set rs = getReadOnlyRS("sCC_GetCustInfo_Report '" & mstUnits & "','" & left(mstCycles,3) & "','" & mstAppName & "'")
' == POPULATE VARS FROM 1st RESULT SET
dtLastDataPoint = rs(0)
iLastDataPoint = rs(1)
set rs = rs.NextRecordset ' <== THIS IS WHERE IS ERROR IS
msgbox rs(0)
end sub
here is my openconnection sub ... oConn is global
Code Snippet
<script type="text/vbscript" language="vbscript">
'== Cursor Location
CONST adUseClient = 3
CONST adUseServer = 2
' == Cursor Type
CONST adOpenStatic = 3
CONST adOpenForwardOnly = 0
CONST adOpenDynamic = 2
' == Lock Type
CONST adLockReadOnly = 1
CONST adLockOptimistic = 3
CONST adLockPessimistic = 2
' ========================================================
sub openConnection()
Dim stConn
set oConn = CreateObject("ADODB.Connection")
'stConn = "DRIVER={sql server};Server=crivm-ccdevsql2005;Database=catcheck;Integrated Security=SSPI"
stConn = "Provider=SQLOLEDB;Server=crivm-ccdevsql2005;Database=catcheck;Integrated Security=SSPI"
'msgbox oConn.state & vbcrlf & stConn1
oConn.open(stConn)
'msgbox oConn.state
ApplySecurity
end sub
' ============================================================
Sub ApplySecurity
'gbhasDBAccess is a global variable on both client and server sides.
'Server side is set in seccheck.asp, which should be at the top of every page
'Client side is set in ApplySecurity() of ConnectServer.asp
Dim appRole
appRole = "appWriters,(tsvc123)"
oConn.Execute "sp_setapprole '" & split(appRole,",")(0) & "','" & split(appRole,",")(1) & "'"
End Sub
</< FONT></script>
Before we moved to SQL2005 I always used this
Code Snippet
' ========================================================
Function getReadOnlyMultRS(strSQL)
set rs = CreateObject("ADODB.Recordset")
rs.CursorLocation = adUseClient
rs.Open strSQL, oConn, adOpenForwardOnly, adLockReadOnly
'Disconnect the Recordset
Set rs.ActiveConnection = Nothing
'Return the Recordset
Set getReadOnlyMultRS = rs
End Function
and this always allowed me to use set rs = rs.nextresultset
but now that we switched to SQL2005 it does not seem to work. I have verified in sql studio that this sp does indeed return 2 resultsets
ADO Error 3251: Current Provider Does Not Support Returning Multiple Recordsets From A Single Execution?
Jul 20, 2005I posted this in the MS Access group, but no luck.------------------------------------------I've got another stored procedure in the same app that returns multiplerecordsets and the code works.But now I've written another SP and the code traps out with the 3251 message.The SP is writing two recordsets.When I run the SP in Query Analyzer, both recordsets appear.But when I step through the code, when the first RS should be there, it's"Closed" and nothing I've tried will make it open.Provider=SQLOLEDB.1 (which works on the other screen...)Seems like I've been here before, but I can't remember what the problem was.--PeteCresswell
View 7 Replies View RelatedNamed SQL 2005 Instance Multiple Active Recordsets-C# Stored Procedure-Connection String
May 7, 2008I am working on a C# stored procedure for SQL 2005, and i've uncovered a couple questions.
First a description of the procedure:
I have a series of equations taking place to calculate a score based on activities in which the user participated in, that will give them an over all grade or rating. The calculations currently take place in the database, and I am moving this from T-SQL to C# CRL.
1. In order to connect the stored procedure to the database I use a SqlConnection and a SqlCommand to execute either dynamic sql or a stored procedure to return data to a data reader. Is there an easier way to connect to the database? In SSMS if i open up the query it knows what database i am connected to. Do I have to make a sql connection in C# stored Procedures?
2. I have multiple functions within the main C# Stored Procedure that I'm working on. This ends up requiring Multiple Active Recordsets. I must set this withing the connection string. Seeing as I'm using a named instance of SQL 2005, I now must put the userid, password, and server name into the code. Is there a more secure way to connect to SQL Server in a C# Stored procedure that allows MARS?
3. I encryped the connection string, and put it into the assembly, I wrote a decryption class, and in the procedure itself everytime I need to refrence the connection string, I call it, decrypt it, and pass it along. But my code to decrypt the connection string is in the compiled DLL, if the server was ever compromised the encrypted connection string and the key to decrypt it are sitting in the DLL. Is there a config file that I can use for C# Stored Procedures?
4. If I have to keep the connection string in the file, then I need to change that per environment. Example I have 3 test environments before production. So I would need to change the connection string for each file. That may be fine for one procedure, but what if I have 20, that will quickly get of hand?
5. Along the security lines, can the assembly for a C# Stored Procedure be called from outside the assembly? From a command prompt, or by a maliceous program? Or could it be called directly by a .NET application instead of going through a T-SQL Stored Procedure that is using
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [PROJECTNAME].[CLASSNAME].[METHODNAME]
Thanks