Why Did Not The Replication Work ?
Mar 24, 1999
I have a database, whose size is 1600MG. That database needs to be copied to the other server. But, the server does not have enough space (1600MB) for the database since the other databases also share the space. Therefore, I transfered the database to a database in that server whose size was set up 700MB the server. The table schema and data were transered successfully. But, when I tried to replicate the tranfered data to another database. The transfered database did not show all of the tables which were shown when I had queried them against that transfered database.
My question is that why it did not show alll of the tables for me to pick up for replication. Does that have something to do with the transfered database? In other word, if I set up the same size of database for the transfered database, it would have worked. Right?
View 2 Replies
ADVERTISEMENT
Sep 4, 2007
I'm pretty new to the whole replication method. I've been making c++ programs to replicate the databases using manual odbc classes. I'm ready to try something new if it would work for me.
I have multiple databases. Basically I have a bunch of computers, each with a SQL server. These databases are the "publishers" due to the fact they are the databases that receiving new data. All of the publishers then upload their new information to the main SQL server. This seems not an issue but the trick is when the publisher uploads the information to the new SQL server, it then deletes the uploaded information from itself. This is basically the same model for everything I do. I was hoping someone might be able to tell me how to do this with replication/triggers and what versions of SQL Server 2005 that I would need to put on each of the publishers and subscriber (main).
Thank you,
Jeremy
View 4 Replies
View Related
Mar 5, 2002
I set up the transationsal replication on SQL7.0. It did not work. Here are the messages
1 on Snapshot Agent: The process could not create file Server_namec$MSSQL7REPLdATAFTPServer_namefile_nam e. Error: Access is denied
2. On Log Reader Agent: bi replication transaction are available
3. Disribution Agent: The initial snapshot for publication "DB_Name" is not yet available.
Thank you for your help
View 2 Replies
View Related
Dec 23, 2006
hi guys :( ive searched on all the topics here about replication. but now i am wondering what windows xp settings do i have to edit? i read something about dcom settings and changing permissions. what is the RIGHT way to share a file or whatever because the schema cannot be accessed for some reason. i need a whole list of things to do because things are not working out after i read the tutorials on other sites. please someone help me.
basically i need to have two servers that need to be replicating each other. i realized that the instances have to be named so i am just totally confused. ill even let anyone connect remotely to help me out if they want. or explaining will do fine. please! thanks guys!
happy holidays!
View 3 Replies
View Related
Jun 22, 1999
Hi there, the subject says it all.
I have two databases on one server. I want to replicate 1 table from one Dbase to the other. Can it be done? Am running SQL 6.5 on NT 4
Gordon
View 2 Replies
View Related
Jul 15, 2004
I want to get notice by netsend, email or any other methods
when replication doesn't work or malfunction.
Does anyone know how to do this or any other solution you use for this kind of issue?
Thank you..
View 9 Replies
View Related
Feb 6, 2004
I have maually deleted the Database.LDF file by stopping the SQL Server. When i start the SQL Server, merge replication which was configured for the database does not work. How do i fix this problem.
Thanks in advance.
Regards,
Venu.
View 1 Replies
View Related
May 15, 2006
Hi
I'm developing a scientific appliation - to forecast the spread of disease. The algorithm has been designed such that different subpopulations reside on separate computers.
The model uses the same set of data repeatedly, and only returns a small signature that reflects the appropriateness of a particular set of parameters.
The model does however change, and I'm looking for a way to roll out this model (which only contains T-SQL, CLR assemblies and service broker code).
I have considered setting up a database on each computer which has the 'data' files which are static, and a separate database which contains the algorithm which can be amended.
Could one then detach the algorithm database making the new version that can then be rolled out (by attaching it to each computer used)?
Is this the best practice? Does anyone have a suggestion as to how to do this?
Go well
Greg
View 1 Replies
View Related
Sep 4, 2006
Hello!
I have a problem with creating Merge replication between two instances of MSDE 2000. In the article http://support.microsoft.com/kb/324992/, published by Microsoft, described, that it is possible.
I am creating Merge Publication at MSDE 2000, with Distributor and Publisher configured at same machine, with options "Allow Pull Subscriptions" and "Allow Anonymous Subscriptions". There is no problem with creating of Publication. Even snapshot generation finishes successfully. Also I create a login with SQL Server Authentication and "System Administrators" database role at the publisher in order to connect to it from Subscriber.
The problem occurs, when creating anonymous pull subscription to this publication at another instance of MSDE. During initial synchronization an error occurs:
The process could not connect to Distributor '<publisher_server_name>'. Login failed for user '<login_created_at_publisher>'. Reason: Not associated with a trusted SQL Server connection. The step failed.
Although I didn't use Windows Authentication at all, so Subscriber doesn't need to connect to Distributor using trusted SQL Server connection.
What is a problem and how can I workaround?
Note: The same works correctly, if MS SQL Server used as a Publisher instead of MSDE.
Please, help!
I can provide publication and subscription creation scripts, if required.
View 1 Replies
View Related
Sep 20, 2007
Hi,
we have developped an application on pdaphone. we try to use merge replication between our sql server 2000 sp4 and sql Ce 3.0 via GPRS . Sometime that works very fine . Sometime it's a nightmare !!! nothing work . we have multiple error....
can someone tell me, what are the rules to make it work ?
can someone tell me, if it really works fine ?
thanks
View 1 Replies
View Related
Aug 4, 2015
I have been evaluating merge replication, 'push' subscription on SQL Server 2014. If the default resolver is used (I refer to @article_resolver parameter of sp_addmergearticle), all seems to work as expected. However if I use "Microsoft SQL Server Subscriber Always Wins Conflict Resolver" (or any other MS standard resolver for that matter), if the Subscriber is on a different machine, the merge agent invariably gives the following error: "The process could not initialize <resolver_name>. Verify that the component is registered correctly."
This does not happen if the Subscriber is on the same machine as the Publisher and Distributor.
The problem seemed to exist in SQL Server 2008 according to some posts but it has been apparently fixed since then. I've tried the following:
- @partition_options = 0, as was suggested somewhere.
- Copied ssrpub.dll (the resolver dll) to the Subscriber machine (should not really matter as this is 'push' subscription?)
- Registered ssrpub.dll with regsvr32 on the Publisher/Distributor machine.
I've also run sp_enumcustomresolvers on the Publisher machine, and it happily showed all standard resolver, including the "Microsoft SQL Server Subscriber Always Wins Conflict Resolver".
Another thought is, I'm using SQL Server Express as the Subscriber (on the remote machine). Perhaps it does not support custom resolvers? (I'm using the full SQL Server in the 'local subscriber' variant, which does work OK as I mentioned before).
Note also that if I create a new publication via SSMS, the Resolver tab of the Article Properties dialog is empty, i.e. it does not list any resolver. The same tab contains the full list of resolvers though, if opened for an existing publication.
View 2 Replies
View Related
Feb 28, 2006
I have a mobile device application using mobile sql 2005 replicating with sql 2000 in a x86 environment. This works fine!
I'm having issues getting this to work under Windows Server 2003 X64.
I've got all the components installed under the X64 environment including CLR 2.0 X64 and the mobile sql tools. the but when I run the Configure Web Synchronization Wizard I get the following error. SQL Server 2005 Mobile Edition Server Tools were not found on the IIS server. Run the SQL Server 2005 Mobile Edition Server Tools installer....
My question is: Were do I get the X64 version of these tools?
sqlce30setupen.msi
sql2Ken@P4.msi
The SQL environment is X86 as follows: SQL2000 SP4
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Any help would be much appreciated!
View 6 Replies
View Related
Jun 15, 2007
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies
View Related
Sep 13, 2007
Hi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
View 2 Replies
View Related
Jan 17, 2002
Hi,
In my production box is running on SQL7.0 with Merge replication and i want add one more table and i want add one more column existing replication table. Any body guide me how to add .This is very urgent
Regards
Don
View 1 Replies
View Related
Aug 22, 2007
Hello,
I have this problem on a Production database.
DBCC OPENTRAN shows "REPLICATION" on a server that is not configured for replication. The transaction log is almost as large as the database (40GB) with a Simple recovery model. I would like to find out how the log can be truncated in such a situation.
Thank you.
View 4 Replies
View Related
Mar 6, 2007
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies
View Related
May 26, 2015
What is the main difference between snapshot and transactional and merge replication?
View 5 Replies
View Related
Jul 28, 2006
Hi,
I have a VB.net app that access a SQL Express database. I have transactional repliaction set up on a SQL 2000 database (the publisher) and a pull subscription from the VB.net app. I use RMO in the VB app to connect to the publisher. My problem is I am getting some strange behaviour as follows
- if I run the app and invoke the pull subscription it works fine. If I then close my app and go back in, I can access my data without any problem
- If I run the app and try to access data in my SQL Express database it works fine. I can then close the app, reopen it and run the pull subscription it works fine
however.......
- if I run the app, invoke the pull subscription (which runs fine), and then try to access data in my local SQL Express database without firstly closing and reopening the app, I get a login error
- if I run the app, try to access data in my local SQL Express database (which works fine), and then try to run the pull subscription I get a "the process cannot acces the file as it is being used by another process" error. In this case I need to restart the SQL Express service to be able to run replication again.
I get exactly the same behaviour when I use the Windows Sync tool (with my app open at the same time) instead of my RMO code to replicate the data.
I am using standard ADO.Net 2 code to access my SQL Express data in the app and closing all connections etc
Any advice appreciated !
Thanks
Ronan
View 2 Replies
View Related
Jun 28, 2007
Hi all,
I have recently setup a transactional replication in MS SQL 2000. After setting up the replication the clients TempDB grew by almost 60GB. Now the client is Blaming me for the TempDB GROWTH and saying that its because of the replication being setup i tried to convince them but they are not satisfied yet. Can anybody please tell me does replication cause the tempdb to grow. If yes then how. can u suggest any good link for getting to know the internal working of SQL Server replication????
Thanks in advance
Jacx
View 3 Replies
View Related
Aug 30, 2007
Hi all,
I know that adding a column using ALTER TABLE to add a column automatically allows SQLSERVER 2005 to replicate the schema changes to the subscribers, however, I would like to add a new column to an existing article that is being used for merge replication, however, I don't want this column to be replicated. Re-initialising the subscriptions is not a option. Help would be appreciated.
I am using SQLSERVER 2005 (SP1).
View 3 Replies
View Related
Sep 2, 2015
I have been researching on the proper steps or sequence to follow to completely remove SQL Server 2012 Transactional Replication. I have read articles about using SSMS as well as using replication stored procedures and some procedures use SQLCMD or just regular TSQL executed in SSMS. I have also read articles where people said all you really need is connect to the Publisher instance, find the publication you want to remove and choose "Delete" and everything will be taken care of behind the scene. I have three SQL servers that participate in transactional replication. SQL-P (publisher),
SQL-D (distributor) and SQL-S (subscriber). Do I need to connect to the distributor instance and the subscriber instance when removing transactional replication or is it just really connecting to the publisher and click delete on the publication? I want everything gone including any metadata, systems tables, distributions db and any other replication objects created during the initial configuration.
View 6 Replies
View Related
Apr 17, 2007
Hello everyone,I am involved in a scenario where there is a huge (SQL Server 2005)production database containing tables that are updated multiple timesper second. End-user reports need to be generated against the data inthis database, and so the powers-that-be came to the conclusion that areporting database is necessary in order to offload report processingfrom production; of course, this means that data will have to bereplicated to the reporting database. However, we do not need all ofthe data in the production database, and perhaps a filtering criteriacan be established where only certain rows are replicated over to thereporting database as they're inserted (and possibly updated/deleted).The current though process is that the programmers designing thequeries/reports will know exactly what data they need from productionand be able to modify the replication criteria as needed. For example,programmer A might write a report where the data he needs can beexpressed in a simple replication criteria for table T where column X= "WOOD" and column Y = "MAHOGANY". Programmer B might come along amonth later and write a report whose relies on the same table T wherecolumn X = "METAL" and column Z in (12, 24, 36). Programmer B willhave to modify Programmer A's replication criteria in such a way as toaccomodate both reports, in this case something like "Copy rows fromtable T where (col X = "WOOD" and col Y = "MAHOGANY") or (col X ="METAL" and col Z in (12, 24, 36))". The example I gave is reallytrivial of course but is sufficient to give you an idea of what thecurrent thought-process is.I assume that this is a requirement that many of you may haveencountered in the past and I am wondering what solutions you wereable to come up with. Personally, I believe that the above method isprone to error (in this case the use of triggers to specifyreplication criteria) and I'd much rather use replication services tocopy tables in their entirety. However, this does not seem to be anoption in my case due to the sheer size of certain tables. Is thereanything out there that performs replication based on complexprogrammer defined criteria? Are triggers a viable alternative? Anyalternative out-of-the-box solutions?Any feedback would be appreciated.Regards!Anthony
View 11 Replies
View Related
Oct 9, 2007
I am working on bringing our disaster recovery site to be a live site. Currently we replicate to one of out servers (server B) with merge replication (from server A). Server A also does one way transactional replication form some table to several other servers including servers at the DR site.
This setup is not going to be fast enough for what we need so I am wondering if a table is receiving merge replication will the merge updates also replicate down the transaction path??
Example...
Server B update a row and merges to Server A. With this update them replicate (via transactional) to Server C??
thanks...
View 5 Replies
View Related
Nov 9, 2006
I have a wired situation..!I set up transactional replication on one of my development server (SQL2000 Dev Edition with sp4).It is running fine without any issues and all of a sudden, i noticed inmy repication monitor tab under Publisher where I usually see thepublication is empty now.I do see the snapshot agent, log reader and distribution agent under myagents inside the replication Monitor. But its usefull to see all 3agents in one window under publisher before. What happend? Is there anyway to get that inside that monitor? Has someone encountered thissitation before? Please advise....After that I tried to create a new set of replication on differentdatabase on the same server and i dont see those either underReplication Monitor - Publishers....All it says is (No Items)....I would appreciate any help to correct this issue... Thanks in advance..
View 2 Replies
View Related
Jan 30, 2007
I have setup transactional replication everything on one box. later(two or three weeks later), Replication monitor is show red X Under my publishers (publications is disconnected). this is SQL2005.
Everyone known how to fix this problem?
Thanks,
Frank
View 1 Replies
View Related
Feb 27, 2007
My error is that 'Name tr is not declared' tr.Rollback() I tried moving the 'Dim tr As SqlTransaction' outside the try but then I get 'Variable tr is used before it si assinged a value'.
What is the correct way? Try conn.Open() Dim tr As SqlTransaction tr = conn.BeginTransaction() cmdInsert1.Transaction = tr cmdInsert1.ExecuteNonQuery() cmdInsert2.Transaction = tr cmdInsert2.ExecuteNonQuery() cmdInsert3.Transaction = tr cmdInsert3.ExecuteNonQuery() tr.Commit() Catch objException As SqlException tr.Rollback() Dim objError As SqlError For Each objError In objException.Errors Response.Write(objError.Message) Next Finally conn.Close() End Try
View 5 Replies
View Related
Apr 19, 2007
I have the below procedure that will not work- I must be losing my mind, this is not that difficult - mental roadblock for me.
Using SQL Server 2000 to create SP being called by ASP.Net with C# code behind
stored procedure only returns if input exactly matches L_Name
PROCEDURE newdawn.LinkNameLIKESearch @L_Name nvarchar(100)AS SELECT [L_Name], [L_ID], [C_ID], [L_Enabled], [L_Rank], [L_URL] FROM tblContractorLinkInfo WHERE L_Name LIKE @L_Name RETURN
I tried: WHERE L_Name LIKE ' % L_Name % ' no luck. What am I missing?
Thank you
View 2 Replies
View Related
May 24, 2007
SP below is not work.It gives null for @kaysay
I used parametric table name. Is this the problem?
My aim to calculate record count of a table
Thanks.
CREATE PROCEDURE Tablodaki_Kayit_Sayisi(@TABLO varchar(30))AS
Declare @kaysay bigintDeclare @SQLString nvarchar(100)Declare @Param nvarchar(100)
Set @SQLString = N'Select @kaysayOUT = count(BELGE) From ' + @TABLOSet @Param = N'@kaysayOUT bigint'
Execute sp_executesql@SQLString,@Param,@kaysayOUT = @kaysay
Select @kaysay
Return
GO
View 3 Replies
View Related
Sep 3, 2007
SELECT H.id, H.CategoryID ,H.Image ,H.StoryId ,H.Publish, H.PublishDate, H.Date ,H.Deleted ,SL.ListTitle,C.CategoryTitle
FROM HomePageImage H
JOIN shortlist SL on H.StoryId = SL.id
(INNER JOIN category C on H.CategoryId = C.CategoryId)
order by date DESC
View 4 Replies
View Related
Apr 12, 2004
Hello,
I am trying to query with my stored procedure. I am getting comma separated list as input parameter (which is VARCHAR) .
The table column, which I have to compare with input parameter value , is in INTEGER datatype.
So when , I compare Like as follows:-
" AND TABLE1.EMPID IN (@INPUTPARAMETERLIST)"
I am getting error. "Syntax error converting the varchar value '34,343' to a column of data type int."
Could anybody help me , to solve this ?
Thanks !
Nicol
View 1 Replies
View Related
Aug 31, 2004
I have a textbox and a checkbox on a form and I'd like to add both values to a db. The textbox value gets inserted fine but I'm having trouble with the checkbox. Any ideas would be greatly appreciated.
Thanks
Form1 is the column in my db.
SqlCommand myCmd = new SqlCommand();
myCmd.Parameters.Add("@ClientCode",SqlDbType.VarChar).Value = TextBox2.Text;
myCmd.CommandText = "UPDATE table SET Form1 = 'Yes' WHERE ClientCode = @ClientCode";
sqlConnection1.Open();
myCmd.Connection = sqlConnection1;
if( CheckBox1.Checked == true)
{
myCmd.ExecuteNonQuery();
}
sqlConnection1.Close();
View 3 Replies
View Related
Aug 29, 2001
Hi,
Beside working right from the server how else someone can perform the SQL admistration job, I guess my question is how do most SQL DBA perform their administration without going to the server directly. Anyone --- can help please??
Thanks in advance.
View 2 Replies
View Related
