Why Do I Get The Following SMTP Email Error In A SSIS Package
Mar 2, 2007
I am running a SSIS package under a trusted account and I am running into a problem when I am executing a email task. The error is an operation timeout which was reported in the log. I am using windows authentication on the connection manager. Other email task configured the exact same way run correctly in the same run. Also when I execute task from BIDS the email is sent. Is there a bug in SSIS which would cause this behavior or some kind of exchange server configuration issue? Any help would be appreciated. Thanks, Greg
Under IIS SMTP I can set bounced email redirect etc. how to do that with dbmail, the idea is I can get the list of bounced emails somewhere so I can create a report.
I want to setup a SMTP using gmail. How to configure it, it says,
In your email client software, under Outgoing mail, set the SMTP server to smtp.gmail.com. Set the your username is yourgooglemailname@gmail.com and make sure "Use username and password" is checked. Also check off "TLS" under "Use secure connection." I tried to do this in code:
Dim htmlMessage As MailMessage
Dim mySmtpClient As SmtpClient
htmlMessage = New MailMessage(From, SendTo, Subject, Body)
htmlMessage.IsBodyHtml = IsBodyHTML
mySmtpClient = New SmtpClient(Server)
Dim myCred As New System.Net.NetworkCredential("myemail@gmail.com", "mypassword") 'CredentialCache
Help with query: I currently cannot be alerted by SQL Mail so I would like to take the script that was generated by SQL server and using the store procedure sp_sqlsmtpmail to generate a email using smtp server to alert me. The store procedure does work. I would like to know if this is possible.
Thanks
Lystra
-- Script generated on 1/21/2005 10:04 AM -- By: MAMSIsa -- Server: (local)
IF (EXISTS (SELECT name FROM msdb.dbo.sysalerts WHERE name = N'Demo: Full tempdb')) ---- Delete the alert with the same name. EXECUTE msdb.dbo.sp_delete_alert @name = N'Demo: Full tempdb' BEGIN EXECUTE msdb.dbo.sp_add_alert @name = N'Demo: Full tempdb', @message_id = 9002, @severity = 0, @enabled = 1, @delay_between_responses = 10, @include_event_description_in = 5, @database_name = N'tempdb', @category_name = N'[Uncategorized]'
Then
Exec sp_sqlsmtpmail @vcTo = 'lwilliams@Huc.com', @vcBody ='Check out problem Immediataly.', @vcSubject ='DOCSITE01FDK - Full Tempdb Log'
I have done some fairly basic things with SSIS before, but I have now got a requirement where I need to send an email to a particular email address if a table (NewSubjects) has any data in it, can anyone give me any pointers on how I can achieve this with SSIS.
Hi, My name is Vinh, I am a new bee in SQL Server 2005. I am using template script (see below) from SQL Server to create account but when I am right click in database mail for testing email and I got the message, could not connect to mail server.
Below I am trying to use smtp to connect but I know in my company we are using Exchange Mail Server. will that make a lot different?
Please help me,
Thank you very much,
sp_configure 'database mail xps', 1 GO reconfigure GO
------------------------------------------------------------- -- Database Mail Simple Configuration Template. -- -- This template creates a Database Mail profile, an SMTP account and -- associates the account to the profile. -- The template does not grant access to the new profile for -- any database principals. Use msdb.dbo.sysmail_add_principalprofile -- to grant access to the new profile for users who are not -- members of sysadmin. -------------------------------------------------------------
-- Profile name. Replace with the name for your profile SET @profile_name = 'TestProfile';
-- Account information. Replace with the information for your account.
SET @account_name = 'vdang'; SET @SMTP_servername = 'smtp.cgdnow.com'; SET @email_address = 'vdang@cdgnow.com'; SET @display_name = 'Vinh, Dang';
-- Verify the specified account and profile do not already exist. IF EXISTS (SELECT * FROM msdb.dbo.sysmail_profile WHERE name = @profile_name) BEGIN RAISERROR('The specified Database Mail profile (<profile_name,sysname,SampleProfile>) already exists.', 16, 1); GOTO done; END;
IF EXISTS (SELECT * FROM msdb.dbo.sysmail_account WHERE name = @account_name ) BEGIN RAISERROR('The specified Database Mail account (<account_name,sysname,SampleAccount>) already exists.', 16, 1) ; GOTO done; END;
-- Start a transaction before adding the account and the profile BEGIN TRANSACTION ;
IF @rv<>0 BEGIN RAISERROR('Failed to create the specified Database Mail account (<account_name,sysname,SampleAccount>).', 16, 1) ; GOTO done; END
-- Add the profile EXECUTE @rv=msdb.dbo.sysmail_add_profile_sp @profile_name = @profile_name ;
IF @rv<>0 BEGIN RAISERROR('Failed to create the specified Database Mail profile (<profile_name,sysname,SampleProfile>).', 16, 1); ROLLBACK TRANSACTION; GOTO done; END;
-- Associate the account with the profile. EXECUTE @rv=msdb.dbo.sysmail_add_profileaccount_sp @profile_name = @profile_name, @account_name = @account_name, @sequence_number = 1 ;
IF @rv<>0 BEGIN RAISERROR('Failed to associate the speficied profile with the specified account (<account_name,sysname,SampleAccount>).', 16, 1) ; ROLLBACK TRANSACTION; GOTO done; END;
Hi, I have RS 2000 running on windows 2003 server. I want user to subscribe to reports and receive reports via email. Initially SMTP was not installed for IIS 6.0, so I installed it and the right way (I had done it on different machine before and was succefull in that) but on this particular machines ...I don't see "Default SMTP Virtual Server" node when I open IIS manager. This is the third day I am working on this issue ..please help me out guys, prashant
I have an SSIS package set up to run various SQL scripts and to notify me if any of the SQL scripts fail. This is working fine, but when I get the email it only says that the script has failed. Is there any way to actually show the SQL result with the error in it? This would save me from having to go and manually run the script again to see the error message.
Hello dear i am using windows 2003 server where i have installed smtp server now i want to configure with remote stmp so i can send an email to any domain.
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute: Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error: Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
I'm trying to make my SEND MAIL TASK in SSIS dynamic, by retrieving SMTP Server name (amongst other email message information) from a table.
I've got an SP that is getting the information into package variable's, and when I don't try and have a dynamic server name (i.e. I use a specified SMTP server in my SMPT Server connection), then the email get sent off.
I'm trying to use an expression to build alter the send mail to use the server name I have in a user variable.
I've tried using the expression for the property: SmtpConnection set to: RTRIM( @[User::MailServer])
I also tried without the RTRIM - I only added it because the error messages seem to include a full 'string' length, and there doesn't seem to be a 'varchar' data type for SSIS variables.
so: a> Is SMTPConnection the property I need to be setting? None of the others seem correct b> If SMTPConnection IS the property I need, does the value give the SMTP Server Name, or just the Name of the connection from the Connection Manager's?
Thanks
Part-Answer to: b> The SMPTConnection property sets the name of the CONNECTION to be used. That Connection needs to set the name of the server. So n ow, the question becomes, how do I configure that from SQL (I know how to use package configurations from XML files).
my package requires a send mail task and i must use a secure non-windows smtp server. can someone please tell me how to configure the smtp connection manager so i can do this? thanks.
Has anybody seen this error. the SMTP somehow seems to work, but the SQL server is not able to send out notifications for jobs.
Message The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-12-10T08:41:06). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it). )
I have searched a whole lot of web and nothing nothing nothing. Any help is welcome Regards Paresh Motiwala
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
I am trying to run an update statement. Both these tbls were migrated from 2000 to 2005.. However the upgrade returnes the foll err. Cannot resolve the collation conflict between "SQL_Latin1_General_Pref_CP437_CI_AS" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
Update statement is as follows:
Update a Set FIELDNAME='C' From table1 a where ACCT in (select loannum from table2 b where a.ACCT=b.ACCT) and ACCT is not null
Hi... hopefully someone can help me out with resolving this error.
We have a set of DTS tasks that have been migrated in SSIS tasks on an existing SQL 2005 server, all is fine there and the tasks run ok.
We now want to deploy a copy of the same tasks to another SQL 2005 server at another organisation, so obviously we'll need to change things like server names and file paths. The tasks update different tables in a SQL database on the same server taking information from flat files. The SSIS dtsx files contain embedded DTS tasks. I've been able to view these successfully using the tools in Visual Studio 2005.
I have created a deployment utility for the SSIS files and installed them on the new server.
When I try and run the first SSIS task on the new server it fails validation with the error "Package name is not specified". Having looked at the task in Visual Studio everything looks ok.
Does anyone know whats going on here and how to resolve it?
we have developed SSIS package in machine1 .when we copy the SSIS solution from Machine1 to Machine2 .when we open the SSIS solution in machine2 we are getting the following errors what could be the reason .help us pls.
1. Error loading Package_test.dtsx: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. d:jeganssis prjsfuzzyfuzzyPackage_test.dtsx 2.Validation error. Data Flow Task: Fuzzy Grouping [3131]: The AcquireConnection method call to the connection manager "AIGSSPORTAL.Apex1.g360user" failed with error code 0xC0202009. Package_test.dtsx
[OLE DB Destination [1146]] Error: An OLE DB error has occurred. Error code: 0x80040E23. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E23 Description: "Cursor operation conflict". [DTS.Pipeline] Error: The ProcessInput method on component "OLE DB Destination" (1146) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
have any of u encountered this error?
package is working good on source side but destination is indicated in red with the above error,it was working good yesterday,not sure what happened today all of a sudden.
Hi all,At this moment I'm trying to get database mail working. According tosome people it should be easy. Well...that is not the case for me.I'm having the following error:The mail could not be sent to the recipients because of the mail serverfailure. (Sending Mail using Account 2 (2006-11-24T08:48:15). ExceptionMessage: Cannot send mails to mail server. (Command not implemented.The server response was: Command not Supported).)SQL Server 2005 is installed on a separate server and the SMTP Serveris Lotus Notes. connecting with port 25.Start and stopping the SQL Server and SQL Server agent i tried already.i tried sysmail_stop_sp and sysmail_start_sp.Sometimes when starting or stopping the Mail with the followingcommands :exec sysmail_stop_spGOexec sysmail_start_spGOI will get the following error:Msg 233, Level 20, State 0, Line 0A transport-level error has occurred when sending the request to theserver. (provider: Shared Memory Provider, error: 0 - No process is onthe other end of the pipe.)So any help would be appreciated.Hennie
I am using the SMTP Task to send an email to about 200 individuals with their own specific attachment. If it cannot find the attachment the SMTP Task fails.
Is there a way to log the failure and have it keep going? That way it will still process everyone, but I would get a list of those who didn't receive the email because there was a problem.
I looked at Jamie Thompson's blog and he had a great script to send out emails. But if I use that, I haven't yet figured out how to pass the filename variable to it and attach the file. Even if I use that script, how do I deal with the errors?
Hi i get a error when i run my SSIS package. Here is the message
Error: 0xC02020A1 at import file, Flat File Source [1]: Data conversion failed. The data conversion for column "su_supplier_code" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.". Error: 0xC020902A at import file, Flat File Source [1]: The "output column "su_supplier_code" (61)" failed because truncation occurred, and the truncation row disposition on "output column "su_supplier_code" (61)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
The funny thing about this is when i run the job a 2nd time it works fine.
Has any one any idea about this error or why the job would work fine the 2nd ?
I can't import a package from the SSIS to the file system of my SQL Server Management Studio. Every time i've tried the following message appears. What should i do to correct this problem? Any ideas?
===================================
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------ Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToDtsServer(Package pPackage, IDTSEvents pEvents, String sPackagePath, String sServerName) at Microsoft.SqlServer.Dts.ObjectExplorerUI.ImportPackageAsAction.ImportPackage(ImportPackageAsForm dlg)
1. I am trying to load data from AS400 DB2 to SQL Database using integration services.
2. I am using microsoft ole DB for Db2 driver to pull data from AS400 and using native SQL driver to load data into MS SQL 2005.
AS400 View to pull this data is---
SELECT UPPER(CHAR(SVSGVL)) AS AccountID, UPPER(CHAR(SVLDES)) AS AccountDesc, INT(SVSGTP) AS AccountTypeID, INT(SVTR) AS TranslationMethodID, INT(SVDEF) AS AccountValue, INT(SVRM) AS RemeasurementID FROM V820PRMF.GSVL01 WHERE (UPPER(SVSGMN) = 'ACCT') ORDER BY AccountID
AccountID String[DT_STR] Lenhth-16
AccountDesc String[DT_STR] Length -30
All other column is int.
MS SQL 2005 is were data to be loaded. Table Info.
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Integration Package
[Destination - Account [34]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".
[Destination - Account [34]] Error: There was an error with input column "ACCOUNTID" (284) on input "Destination Input" (47). The column status returned was: "The value violated the integrity constraints for the column.".
[Destination - Account [34]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (47)" failed because error code 0xC020907D occurred, and the error row disposition on "input "Destination Input" (47)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Account" (34) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Hello Everyone, When i try to scedule a job on SQL Server Management Studio it gives the Following Error:
Unable to cast object of type 'Microsoft.SqlServer.Management.Smo.SimpleObjectKey' to type 'Microsoft.SqlServer.Management.Smo.Agent.JobObjectkey'.(Micorsoft.SqlServer.Smo)
Can anyone tell me why ?
MS SQL Server Details:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
I am running into an error when running a package using a scheduled job under SQL Server Agent account. I am getting following error:
Date 6/12/2007 4:19:15 PM Log Job History (VistaODSFeed)
Step ID 0 Server 006-DEVSQL2005 Job Name VistaODSFeed Step Name (Job outcome) Duration 00:00:00 Sql Severity 0 Sql Message ID 0 Operator Emailed Operator Net sent Operator Paged Retries Attempted 0
Message The job failed. Unable to determine if the owner (ACIsnasir) of job VistaODSFeed has server access (reason: Could not obtain information about Windows NT group/user 'ACIsnasir', error code 0x6ba. [SQLSTATE 42000] (Error 15404)).
ACIsnasir is not the account under which SQL Server Agent service runs. However ACIsnasir has sa priveleges. not sure why am I getting ACIsnasir in the error and not the account under which sql server agent runs.
While executing the SSIS package from visial studio it is running. If we execute from Integration services - - -> stored packages - - - -> msdb - - - -package name, the package gets executed.
But when scheduled through jobs it gives the following error in history
"Execution as user. <user name > The command line parameters are invalid. the step failed"