Why Would System Admin Privileges Be Required To Connect To A Default Instance?
Apr 25, 2007
I have a server with 3 SQL Server named instances on it - servername, servername/TST and servername/GOLDSTD. I have several databases on the default instance (servername) but users cannot access the databases unless they are given system admin privileges to their login. This occurs using both SQL Server Logins and Windows authentication logins. If I move the database to a different named instance (servername/TST), the problem no longer exists and users can connect with dbo privileges. Any suggestions or is this typical for default instances? Thanks in advance for any help
View 8 Replies
ADVERTISEMENT
Jul 22, 2015
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
View 5 Replies
View Related
Aug 26, 2014
Plan to setup AG on in both default and named instance of two nodes. Can we do it ?
View 9 Replies
View Related
Aug 21, 2007
I ran the command line tool C:WINDOWSMicrosoft.NETFrameworkv2.0.50727aspnet_regsql.exe. Then I ran the web config tool and tried to test the default provider and it keeps saying it couldn't connect to the database. The database exists in sqlExpress instance. Any ideas?
View 18 Replies
View Related
Feb 5, 2007
When I try to connect to a default Express instance in Management Studio at the machine (Windows XP SP2) where the instance is installed, I'm getting the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server)
What does provider: SQL Network Interfaces mean? Does it mean the Shared Memory, Named Pipes and TCP/IP?
Additional information:
1. The following Network Protocols are enabled: Shared Memory, Named Pipes, TCP/IP thru Configuration Manager
2. SQL Server Express default instance is running using NT
AUTHORITYNetworkService.
3. SQL Server Browser service is not running. I believe this is not needed unless I want to connect to the instance from another machine.
4. Has tried to disable Windows Firewall but I believe it should not be matter in this particular case since this is within the same machine.
5. Can connect to the instance in ODBC Administrator using System DSN thru Named Pipes or TCP/IP.
Can such error caused by not having sufficient memory so the system is running kind of slow?
View 2 Replies
View Related
Mar 25, 2015
How can you install the System Databases to a drive other than the default?
I want the Data Files to be installed on D:MSSQLData and the log files to be stored on D:MSSQLLog.
For better, quicker answers on T-SQL questions, click on the following...
[URL]
For better answers on performance questions, click on the following...
[URL]
View 9 Replies
View Related
May 21, 2015
I create default instance on SQL Server 2012 Standard.
When I set it up, I changed instance id from 'mssqlserver', which is a default value, to 'new_instance_id'.
For some reason I want to connect to the instance with computername new_instance_id
Can I do it?
View 1 Replies
View Related
Jun 8, 2007
Dim strCON As String = _
"workstation id=DJI-MAIN;packet size=4096;user id=sa;integrated security=SSPI;data source=DJI-MAIN;persist security info=False;initial catalog=RacingSystem"
Dim cnn1 As New SqlConnection(strCON)
cnn1.Open()
This is the code I have been using to connect to my default instance for 18 months. A recent upgrade to Windows Live onecare now prevents me connecting to the server from the same machine. The following error message is generated:-
Unhandled Exception: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.
at System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
at System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
at System.Data.SqlClient.SqlConnection.Open()
at TrainerReport001.Form1.Form1_Load(Object sender, EventArgs e) in F:#ProjectsStatsOwnerReport001Form1.vb:line 84
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)The program '[3336] TrainerReport001.exe' has exited with code 0 (0x0).
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
at System.Windows.Forms.Control.SetVisibleCore(Boolean value)
at System.Windows.Forms.Form.SetVisibleCore(Boolean value)
at System.Windows.Forms.Control.set_Visible(Boolean value)
at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at TrainerReport001.Form1.Main() in F:#ProjectsStatsOwnerReport001Form1.vb:line 2
If I turn off the onecare firewall I can connect as normal, but this is not a desired option. I have tried enabling port 1433 on the firewall, this does not work either. Any help greatly appreciated, onecare support seems reluctant to help.
TIA
View 4 Replies
View Related
Sep 17, 2007
My VB.net application manipulates data in a local SQL Express database. When the app is installed, the database does not exist, but it cannot be created at run-time by anyone other than a user with administrator privileges. In addition, the application shares the data stored in SQL with a critical 3rd party component that can only reach the database via named DSN (also not existing prior to installation).
I see my primary SQL security options as being:
(1) Use SQL or Mixed Mode authentication with an admin-level username/password combination, or
(2) Create a db user/group with admin-level privileges and grant membership to all NT authenticated users
Secondary problem: Creating the DSN.
Does it make sense to create a Custom Action (.dll) that is called at the end of the installation process in order to create the database, the user security context and the named DSN?
Am I overlooking some built-in functionality provided by Visual Studio 2005 that will accompish some or all of this for me? I am aware that customizing the 'silent' installation of SQL Express to use a different authentication mode requires manifest tweaking -- I just don't know anything about setting up the appropriate security for this situation. Would you put the db and role creation stuff in a SQL script and execute it post-install?
Thanks in advance for any insight you can provide.
-T
View 1 Replies
View Related
Jul 20, 2004
Hi,
Can any of you tell me how to create a login in SQL Server 6.5 with System Administrator privileges, like we can do with SQL 7 or SQL 2000 ? I don't want to use the sa login.
Thanks
View 1 Replies
View Related
Feb 19, 2007
Hi, I have a task in hand to migrate (upgrade) from SQL2K named instance to SQL2K5 default instance. There are many intranet applications touching current SQL2K. I would like to perform this upgrade such that I don't have to touch any application code - meaning I don't have to change the connectionstring to point to new Default instance. How can I achieve this?
So, in otherwords, here is what I want to achieve:
Current Server: SQL2K: SERVER_AINSTANCE_A (named instance)
Upgraded Server: SQL2K5: SERVERB (default instance)
If I have both default, I could achive this by setting up DNS alias after migration done so that any call for SERVER_A would point to SERVER_B. But in my case, I don't have SERVER_A, I have named instance. Is there any solution?
Regards,
Vipul
View 1 Replies
View Related
Oct 10, 2001
I am trying to set up a Named Instance of SQL 2000 on the same machine that has a default instance of SQL 7.0. The setup always completes and I am able to register the Named Instance of the SQL Server with which it was installed on. However, when I try to connect the users to the database, with both windows and SQL authentication, I receive a SQL server not found error. I have tried an alias setup as well as physically specifying the port number in settup up an ODBC connection.
Has anyone ran into similar problems?
Also, has anyone been able to successfully complete the process as mentioned above?
View 1 Replies
View Related
Mar 2, 2007
I have a server with sql server 2005 installed as the default instance -- I have a piece of software that needs SQL2000 to be the default instance. Is there a way other than install new sql2005 named instance and move databases to rename my SQL2005 instance from <machinename> to <machinename>sql05 for example?
Bryan
View 2 Replies
View Related
Aug 24, 2006
I have SQL Server 2000 Standard Edition (sp3a) running on a windows 2003 (sp4) Server.
It is a Production Server with 3 NAMED Instances and NO Default Instance.
Does anyone know if I can rerun the SQL Server Install and add a DEFAULT Instance to this box without disrupting the other Named Instances???
View 5 Replies
View Related
Oct 30, 2007
I installed SQL Server 2005 recently on a cluster. I didn't go for the default instance and instead I named the instance option. Now I would like to migrate everything from the named instance to the default instance, which I haven't yet installed.
Is this an easy process? What about the logins and the maintenance plans and jobs? Is there anything else I need to be aware of?
View 1 Replies
View Related
Apr 13, 2007
Hi
I've never had to do this, but when I downloaded the Web Workflow Approvals Starter Kit, it requested that I install the database into a User Instance of .SQLEXPRESS.
Now the problem is, I've installed it onto a default instance, so I was wondering whether you can create a named instance on top of a default instance... and if so, how would you do that?
Cheers
Chris
View 3 Replies
View Related
Mar 20, 2014
I have a 3 node cluster on which I have installed SSAS as it's own insntance. I have created this as a named instance and can connect to it by serverinstance if I'm on the server itself. However from my desktop I get the error saying instance was not found on server name.
I have defined an alternate port and setup firewall rules and can connect via server:port but not serverinstance. Prior to making this change SSAS was running on default port of 2383 and I could connect just by servername.
I have read many articles for previous versions saying that clustered SSAS will always use 2383 and that you must connect just using servername. However and this is were it gets strange. I have a 2 node UAT cluster with SSAS setup exactly the same way I've described above and I can connect from my desktop as serverinstance.
Should I be able to connect as serverinstances for a named clustered instance in 2012 ?
View 4 Replies
View Related
Aug 7, 2015
I've SQL instance used for Telecom Software, that SQL instance kept to run automatically consume 2 GB RAM and slow my machine..How could I configure it to lunch only when I open my Telecom Software and to close when I exit it.
View 9 Replies
View Related
May 7, 2007
Hi all,
what are the minimum required permissions for being allowed to deploy a report? When I try to deploy a report in BIDS I get the error message that my user has not sufficient rights for doing so.
Some key data for my configuration:
Windows Server 2003 Standard Edition with Service Pack 1
SQL Server 2005 Standard Edition with Service Pack 1
I'm not a local administrator, but I have administration rights for SQL Server and Analysis Services
I'm in the Reporting Services' system administrator and system user groups
I can access http://localhost/Reports, but not http://localhost/ReportServer
I have access to the directory (incl. subdirectories) MSSQL.2, but not to MSSQL.1MSSQL and MSSQL3Reporting Services
I can't run the Reporting Services Configuration Tool (see http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1565766&SiteID=1)
I can't connect to Reporting Services in SQL Server Management Studio
My question is (as I have already mentioned in the beginning): what are the minimum rights the IT administrator has to assign to my user so that I'll be able to deploy reports? Giving me local administrator rights is not possible.
Thanx in advance and kind regards,
Gerald
Update:
In the meantime I have found out, that I'm most probably not a member of the Publisher role. But although I am in the System Administrator role I cannot assign myself to this role. When going to http://localhost/Reports the required links are just not visible. Is this because I'm not a member of the groups SQLServer2005ReportServerUser$... and SQLServer2005ReportingServicesWebServerUser$... ?
View 4 Replies
View Related
Nov 15, 2007
The box I am trying to connect to is running two instances of SQL Server.
There is a SQL Server 2005 instance which is the default. There is a SQL Server 2000 instance which is named 'SQLSERVER'.
I can connect to the SQL Server 2000 instance no problem:<add key="ConnectionString" value="server=MYPCSQLSERVER;database=mydatabase;user id=****;password=****" />
However, I am having trouble connecting to the Default SQL Server 2005 instance. I have tried:
<add key="ConnectionString" value="server=MYPC;database=mydatabase;user id=****;password=****" />
but it doesn't work. I have tried explicitly setting SQL Server 2005 to use port 1434 (as SQL Server 2000 is running on port 1433), and then used:
<add key="ConnectionString" value="server=MYPC,1434;database=mydatabase;user id=****;password=****" />
but this doesn't work either.
Am I mssing something here? Any help much appreciated
Thanks...
View 2 Replies
View Related
Jan 17, 2007
If you were asked to install SQL 2005 on a machine, would u install a default instance or a named one? And why would u choose one over the other?? Also, r there any issues with using a default instance?
Thank you for all your help.
View 6 Replies
View Related
Oct 17, 2014
I designed the AlwaysOn wrong, but every time we fail over from primary server to another server, my applications cannot connect because the sql logins cannot connect to their default databases. Once I run the command to link the login with the user in the default database then the users are able to connect. Did I do something wrong when designing AlwaysOn?
View 9 Replies
View Related
Sep 17, 2007
Hi everyone
I have a really odd problem that has manifested its self. I have a Windows Mobile 6 device that I debugging my application on, the application uses a local Sql Compact sdf file, if I just run the app, when it comes to executing some ado.net against the database I get the following error:-
QP is missing and it is required to evaluate default expressions. Ensure that sqlceqp30.dll is in the same directory as the storage engine (sqlcese30.dll)
If however I open the the database using query analyzer first on the device then everything is ok until I next soft reset the device
Has anyone else come across this?
Thanks in advance
Dan
View 8 Replies
View Related
Jan 23, 2015
I'm using SQL accounting software now and i have a problem with my designer report. When i using designer report to design my customer statement of account, after i save the new design, i haven't rename it for the new statement report so the name there empty and i exit the designer report. So when i re-open the designer report, suddenly pop out "field value required". What should i do...? How can i re-open the designer report again?
View 1 Replies
View Related
Oct 29, 2015
I have a Windows NT group that is used to delegate certain database responsibilities to other members of staff and I am trying to grant permissions for the members of the group to be be able to establish database mirroring sessions, as in run the following:
ALTER DATABASE <database>
SET PARTNER = 'tcp://principal_server.domain.com:port';
Although the group has db_owner role membership to the user database which grants the ALTER permission on the database, the following is being generated in the error log when they get to this step on the intended Mirror instance after restoring the database correctly in preperation:
SqlDumpExceptionHandler: Process 59 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
* *******************************************************************************
*
* BEGIN STACK DUMP:
* 10/29/15 11:16:15 spid 59
*
*
* Exception Address = 00007FF9A6AF838C Module(sqlmin+000000000003838C)
* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
* Access Violation occurred reading address 00000000000000D8
* Input Buffer 210 bytes -
* alter database <redacted> set partner = '<redacted>';
As you can see, the statement is denied to the user. There are no issues with the database as I am able to run the same query successfully using my own sysadmin account after the failed attempt. What other minimum permissions the group might need to successfully enable them to setup a mirroring session?
View 9 Replies
View Related
Mar 7, 2006
It is possible for a task to be executed multiple times in parallel. e.g. If a package is executed more than once using "Execute Package Task".
I understand that in the future the ForEach container will have the ability to execute all its iterations in parallel as well.
This is a problem. In the eventhandlers we know the SourceID of the container raising the event so we can tie together events raised by the same container but this simply isn't possible if the events are running in parallel.
An example of where we would want to do this is drop a record into a table when a container fires OnPreExecute and then update that record with the container duration time upon OnPostExecute. This does NOT work when tasks run in parallel.
The solution to this is very simple. As well as capturing System:ourceID, capture a new value, System::ExecutionID as well.
In the meantime, can anyone think of another way around this?
cheers
-Jamie
P.S.
I have raised this bug here: http://lab.msdn.microsoft.com/ProductFeedback/viewFeedback.aspx?feedbackId=FDBK46904 and have asked for the provision of System::ExecutionID. If you think its a good idea then plese go ahead and vote for it.
[Microsoft follow-up]
This is still a valid request. Does it need opening on Connect?
-Jamie
View 3 Replies
View Related
Apr 17, 2008
I have DBA that is convinced that they need domain admin rights to install SQL 2005 into an existing cluster. The domain groups and service accounts for SQL have been created already. Is having domain admin rights required during the install of SQL 2005 in a cluster?
View 1 Replies
View Related
Jul 16, 2007
[Microsoft follow-up]
I submitted a posting to connect here: https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=287213
Here is what I wrote:
A number of tasks output data to variables or text files. e.g. WMI Data Reader Task, Execute SQL Task, Web Service Task.
Consuming that output in a data-flow isn't particularly easy. You either need a Flat File source adapter (which requires an othrewise superfluous connection manager) or write come code in a script component to parse the recordset. There is simply no easy way to push data from these sources into the dataflow.
Thw built-in mechanism for passing data between different tasks is raw files. Currently they can only be used by the dataflow but I see no reason why they couldn't be used by other tasks as well. It makes complete sense to me for a WMI Datareader Task to push some data into a raw file and then we chew that data up in a dataflow.
The following response came back
Our current architecture actually doesn't have the buffer system as in Data Flow, when you are in the Control Flow. What you are asking would require us to build a similar buffer system in the Control Flow, which is a fundemantal architectural change. We'll not be able to take this, sorry.
I'm afraid I don't understand that response. Obviously I know that buffers are only in the data-flow - but I don't see why that's relevant. Raw files are just files on the file system, same as any other. OK, their format is very proprietary but its you guys that built the format. Essentially all I'm asking you to do is output the data in raw file format as opposed to flat file format. There's no notion of buffers in a raw file because its just a lump of data. Or is there? If not, I'm afraid I don't understand your answer.
Please could you clarify the answer?
-Jamie
View 14 Replies
View Related
Jan 23, 2007
Can someone help me with this error, so the page can show the rocords, its works on my PC but not at my host.
I get this error:
Exception Details: System.Data.OleDb.OleDbException: No value given for one or more required parameters.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[OleDbException (0x80040e10): No value given for one or more required parameters.]
System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) +267
System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) +192
System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) +48
System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) +106
System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior) +111
System.Data.OleDb.OleDbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) +4
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +141
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
My code is:
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="CMS_Default.aspx.vb" Inherits="cmssystem_CMS_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="CM_form" runat="server">
<div>
<asp:GridView ID="GridView1" runat="server" DataSourceID="CMSqlDataSource">
</asp:GridView>
<asp:SqlDataSource ID="CMSqlDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:CMConnectionString %>"
ProviderName="<%$ ConnectionStrings:CMConnectionString.ProviderName %>" SelectCommand="SELECT [SiteMainID], [SiteMainIdentity], [SiteMainText] FROM [MainSiteText] ORDER BY [SiteMainID]">
</asp:SqlDataSource>
</div>
</form>
</body>
</html>
View 7 Replies
View Related
Oct 9, 2007
Hi,
I am getting an error when i am trying to insert some value to the sql ce database
"QP is missing and it is required to evaluate default expressions. Ensure that sqlceqp30.dll is in the same directory as the storage engine (sqlcese30.dll)"
Please help
Thanks
Nebu
View 1 Replies
View Related
Jul 5, 2006
I have a bit of problem I was hoping someone could point me in the right direction. I have a SQL Server
2005 database which leverages both the Membership and Roles APIs. When I recreate
the database for production release, I simply run an sql file using the sqlcmd
utility - no problem. What I need is a way to add a default administrator role,
account and assign this new administrator to the administrator role.Can someone advise on how this is typically handled?
View 6 Replies
View Related
Nov 15, 2007
Hi
I am new to .net and sql server....i have just installed VS 2005 and sql server7.0...
I am doing my coding in vb.net......so i wanted to know the connection of the datagrid to the db in my sql server 7.0.
Can some one pls help me with this urgently.
View 6 Replies
View Related
Mar 15, 2006
Hi There
I am using SS2005 Enterprise Edition, proper release version not a ctp or anything
When i try navigate to my packages in MSDB i get the following error.
Encrypt not supprted in Sql Server.
I have done some checking and it is a known fact the sql server will enxrypt packages, and that the resolution is to use certificates.
Also some indications from links i have found that this is just a ctp or beta version issue.
Can someone please tell me if there is anyway around this besides certificates.
One is to use file system for packages, but how can i at least delete the packages deployed to sql server so far ???
nxPlease help , Thax
View 1 Replies
View Related
