Wierd Result Set Problem
May 2, 2007
Hi all,
We have an asp.net2 website pointing at sql2005 (not service packed yet - it may be the cause, not sure - would like opinions first!).
The website will run without problems, but randomly we get the following scenario:
We have a function that takes a SP name and a sqlcommand with parameter information. It opens a connection and uses a dataadapter to fill a datatable, then closes the connection and returns. When the problem occurs, we get a sqltimeout on the line where it tries to fill the datatable. However, when the function is called again, the results from the first query seem to get populated into the datatable. Then when it gets called again, the previous results are again returned. Its like ADO sees the timeout (but sql doesn't), but then picks up the next available resultset from sql (which is the wrong one!).
Hope the above makes sense....
Cheers,
James.
View 5 Replies
ADVERTISEMENT
Sep 21, 2000
Hi all,
I was trying to run this query
strSQL = "select '<input type=text name='& id &'size=4 maxlength=4 value=>',product,description,moreinfo,media,License,unitc ost from newdeal where category='" & session("category") & "'"
Idea is the value of id to be fetched from the DB and substituted in the input box.It works well with MS Access but in SqlServer it is showing an error saying that data of varchar type cannot be converted to *******.Id is ******* data type in the DB .can anyone help me please
Thanks
Shyam
View 2 Replies
View Related
Dec 6, 2004
I'm writing a report for a survey application. There is a subscriber table, a question table, and an answer table. The subscriber table holds info like the name, address, etc of the publication's subscribers. The Question table holds the questions on the survey (ie, How many widgets do you own? What is your age? How many do you think you will purchase in the coming year?). The Answer table holds answers to each question (18-21, 25-50%, 20+, etc). I am forced to work within a very non-standard database application running on MS SQL Server 2000 that also uses a separate Relationships table, so to determine which answers go with which questions the relationships table will have a record linking a question to an answer (and vice versa). To determine how each subscriber answered the question the subscibers have a record in the relationships table linking them with specific answers (and vice versa). Both types of entries are in the same table. There are several questions that will include a note to "check all that apply" (you may get several widgets from the company). The report runs through each question, shows how many subscribers answered the question, and how many selected each answer as a percentage of the total for that question. It is nearly finished, I can run it on the test data for any date, but there is one special case I'm having trouble with. For one question, they want to know additionally how many people chose one possible answer, but no others. I can do it using simple SQL to get the list of the subscribers that chose the answer in question, and then loop through each one in vb and run another query that will tell me how many answers related to that question they selected. This works okay for the test data, but in production there are more than 100,000 subscribers, which means running 100.000+ individual querys. I know it's possible to do this in one (all I want is the final count), but the SQL for this is horrid. Any help appreciated.
View 3 Replies
View Related
Apr 16, 2006
hey ppl, if there is any1 that can help me here i would apreciateerror line(probably)Comando = New SqlCommand("INSERT INTO Table1(name) VALUES('a')", Conexao)on Table1 i have those fieldsid(int, identity) e name(text)but when i execute this code i get the following error:Error on the XML processing: no element found(ps. the error wasnt on english so i made a poor translation but i think u can have a general ideia)(the error message untranslated)Erro no processamento de XML: nenhum elemento encontradoPosição: http://localhost/teste.aspxNúmero da linha 1, Coluna 1:anyway, the wierd part is that on the sqlserver the data is insertted normally.. so.. what is that error??any1 pls help me! im going nuts (ps. im still noob on asp.net/sqlserver so please be gentle ^.^)(ps2. sorry for the crap english but it isnt my native language :) )
View 3 Replies
View Related
May 19, 2006
Hi all,
I have a table - customer with a Column state_code varchar(5) and another valid( smallint)
select count(1)
from customer
where state_code != 'U' -- for unknown
and valid= 0 -- for valid
Returns different counts each time, even when the data in the table is NOT Changing.
something with != operator ?
Thanks for your help !
Sri
View 5 Replies
View Related
Sep 25, 2007
Ill try describe this as best I can, because this isnt something that would be done usually, I think.
------------
SELECT Items
FROM tblFood
WHERE Type = "Fruit"
RETURN
-------------
This would return...
Items
-----------
Apple
Orange
Pear
Strawberry
etc...
Would there be a way to create a new Column for each Item of the Select? eg..
Col1------Col2---------Col3----------Col4
Apple--Orange------Pear-----Strawberry
The amount of columns needs to be dynamic. If i were to add pineapple there needs to be 5 columns etc.
Sorry if this has been covered before but I wasnt sure on search criteria. Thanks in advance.
View 8 Replies
View Related
Oct 11, 2001
Hi all,
I'm having a real wierd problem with sql 7.0 (sp3)update statement.
here is my table structure
sku varchar(18)
minimumquantity varchar(7)
maximumquantity varchar(7)
usa varchar(20)
when I issue an update like this...
update sapproductprices
set usa= "8.25"
from sapproductprices s
where (s.sku= "VSE-ASAP-BB-100-S1")
it works!, but, when I change my update to this it does'nt work...I get a message which says "the command completed successfully" and no update happens
update sapproductprices
set usa= "8.25"
from sapproductprices s
where (s.sku= "VSE-ASAP-BB-100-S1"
and s.maximumquantity ="10")
Can someone shed some light on this one please...
thanks
uday
View 3 Replies
View Related
Oct 11, 2001
Hi all,
I'm having a real wierd problem with sql 7.0 (sp3)update statement.
here is my table structure
sku varchar(18)
minimumquantity varchar(7)
maximumquantity varchar(7)
usa varchar(20)
when I issue an update like this...
update sapproductprices
set usa= "8.25"
from sapproductprices s
where (s.sku= "VSE-ASAP-BB-100-S1")
it works!, but, when I change my update to this it does'nt work...I get a message which says "the command completed successfully" and no update happens
update sapproductprices
set usa= "8.25"
from sapproductprices s
where (s.sku= "VSE-ASAP-BB-100-S1"
and s.maximumquantity ="10")
Can someone shed some light on this one please...
thanks
uday
View 2 Replies
View Related
Jul 20, 2005
Hi,I can not find any reference or support for the following issue fromMicrosoft or on Google:When I open a table either to return data or try to use the design tools orif I try to create a new database diagram, I get a new result pane, diagrampane etc... but no result and no functionality within that pane. Thedatabase is working and I can run querys using MS Query. The problem seemsto be with MMC or Enterprise Manager.I am using SQL Server 7.623 Service Patch Level 4 or 6. I am not sure onthat point. This has been a stable well functioning system for years withno recent changes. So I am sure it is not a configuration issue.Thanks in advance for your help.PS; I don't want to seem rude, but I am not interested in buying a new"upgrade" to fix this so any MS adbots out there can just not bother withresponding to this post :)
View 1 Replies
View Related
Feb 13, 2007
hi all!
i have encountered an inconsistent error while creating packages programatically. i am trying to create an ExecuteSQL Task like this:
ExecuteSQLTask sqlTask = (ExecuteSQLTask)sqlTaskHost.InnerObject;
and somtimes it failes on this command with this error:
<Message>Error in generating package C:PROJECTSPOSTALBuildSSIS packagesMappingsMappingsSBSCR_52_OUT.dtsx</Message>
<InnerException>Type 'Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask' in Assembly 'Microsoft.SqlServer.SQLTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' is not marked as serializable.</InnerException>
<Data />
<Source>mscorlib</Source>
<HelpLink />
<StackTrace> at System.Runtime.Serialization.FormatterServices.InternalGetSerializableMembers(RuntimeType type)
at System.Runtime.Serialization.FormatterServices.GetSerializableMembers(Type type, StreamingContext context)
at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitMemberInfo()
at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitSerialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter)
at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.Serialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter)
at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Serialize(Object graph, Header[] inHeaders, __BinaryWriter serWriter, Boolean fCheck)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Serialize(Stream serializationStream, Object graph, Header[] headers, Boolean fCheck)
at System.Runtime.Remoting.RemotingServices.MarshalToBuffer(Object o)
at Microsoft.SqlServer.Dts.Runtime.ObjectHostImpl.get_InnerObject()
at Microsoft.SqlServer.Dts.Runtime.TaskHost.get_InnerObject()
at InterfaceEngine.OutputInterface.CreateExcel() in C:PROJECTSPOSTALBuildInterfaceInterfaceEngineInterfaceEngineOutputInterface.cs:line 842
at InterfaceEngine.OutputInterface.GenerateOutputPackage() in C:PROJECTSPOSTALBuildInterfaceInterfaceEngineInterfaceEngineOutputInterface.cs:line 322</StackTrace>
<TargetSite />
what is this about? why does it happen , and why not always? the package generation is generated by a web service that is called from an asp.net 2.0 page .
thanks a lot!!!
View 4 Replies
View Related
Sep 15, 2006
Hi All, we got a problem that I hope you guys can help us with.
We are trying to extract data from a SQL database in XML format to a variable (string) using an 'Execute SQL Task'
In the task we are using an ADO.NET connection to the database which is fine and via direct input we are using this query.
SELECT
title,
initials,
surname,
username,
gender,
emailaddress,
addressline1,
addressline2,
addressline3,
town,
postcode,
country,
emailcontact,
postalcontact,
telephone
FROM
CRMCustRecords
FOR XML path('customer'), root('CRMData'), ELEMENTS XSINIL
In SSMS this is fine and returns an ok (to my eyes anyway!) XML resultset.
<CRMData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<customer>
<title>xxx</title>
<initials>xxxxxxx</initials>
<surname>xxxxxx</surname>
<username>xxxxxx</username>
<gender>x</gender>
<emailaddress>xxxx@xxxxxxx.xx.xx</emailaddress>
<addressline1>xxxxx</addressline1>
<addressline2 xsi:nil="true" />
<addressline3 xsi:nil="true" />
<town>xxxx</town>
<postcode>xxxxxxxxx</postcode>
<country>xx</country>
<emailcontact>x</emailcontact>
<postalcontact>x</postalcontact>
<telephone>99999999999</telephone>
</customer>
<customer>
</CRMData>
However the SSIS task (running exactly the same query) is returning
<ROOT>
<CRMData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<customer>
<title>xxx</title>
<initials>xxxxxxx</initials>
<surname>xxxxx</surname>
<username>xxxxxxxx</username>
<gender>x</gender>
<emailaddress>xxxxx@xxxxxxxxxx.xx.xx</emailaddress>
<addressline1>xxxxxxxxxx</addressline1>
<addressline2 xsi:nil="true" />
<addressline3 xsi:nil="true" />
<town>xxxxx</town>
<postcode>xxxxxxxx</postcode>
<country>xx</country>
<emailcontact>x</emailcontact>
<postalcontact>x</postalcontact>
<telephone>9999999999</telephone>
</customer>
</CRMData>
</ROOT>
I setup the query as a stored procedure and changed the SSIS accordingly. Running the sp from within SSMS was fine but the task still returned the wierd results.
This is completely unexpected and giving us headaches. It doesn't even look like well-formed XML to my eyes and won't display in IE without showing problems! Where are the eroneous /'s and ROOT nodes coming from?
I can't imagine we are the only people to have run into this and I'm sure we aren't doing something quite right - just stuck as to what we're doing wrong.
Hopefully I've provided enough info. If not just ask.
Thanks for any and all input
Pat
View 3 Replies
View Related
Oct 3, 2007
Hi
I'm modifying a report from MS CRM. Sales Pipeline. Not the easiest one but still. I just got to the drilldown report and need to change some things in it. I tested the SQL code as I could in SQL Server Management Studio so that I don't have any misspellings (the report I'm modifying is on a remote location). Anyway, now that I copy my code to the SQL Server Business Intelligence Development Studio and to the dataset I'm modyfing I see that a chunk of code from the bottom is missing ... ??? ... is there a limit on how much I can type?!
I counted in Word that I have 33.176 characters and 878 lines of code. Is that to much?!
The original report has a dataset of 27.529 characters and 724 lines of SQL code.
View 27 Replies
View Related
Dec 2, 2007
Hi Friends,
I am struggling with creating a simple stored procedure, I want to take max(timekey) out in one variable @Val in a dynamic SQL statement as below in SP. When I create this SP, it creates successfully but when I run it I get error
Select @Val=MAX(TimeKey) FROM ABC
Msg 137, Level 15, State 1, Line 1
Must declare the scalar variable "@Val".
Can someone help me in understanding this wierd behavior? And how to get rid of this. Table and SP scripts are as below
CREATE TABLE ABC (TimeKey int, Data_Val int)
CREATE Procedure MAXVal(@Table_Name Varchar(30))
AS
BEGIN
DECLARE @Val INT,
@SQL Varchar(100)
SET @SQL='Select @Val=MAX(TimeKey) FROM '+''+@Table_Name+''
EXECUTE (@SQL)
END
Thanks,
Kul
View 6 Replies
View Related
Jan 7, 2008
Hi,
I used two symbols (”¬€¬ and ”´) in my reporting services page and they appear fine in Internet Explorer. However, when I try to export the page to a PDF file, they appear as question marks.
Can someone tell me why or how to work around this?
Thanks in advance,
Steven
View 5 Replies
View Related
May 15, 2006
I am not sure which of the forums this question should be posted to (Engine or TSQL) so I have posted to both. Please forgive the cross-post.
The problem we are having is with the performance of a stored procedure. Normally, this specific proc will only take seconds to run, but if we at all modify the stored proc in any way, the proc will take at least 20 minutes to run (we don't really know when it will finish because we cut it off at 20 minutes).
When this happens, we can run the profiler and see that a lock and unlock is happening on each record that the query is returning. We are at a loss as to why this is happening.
The only way to fix it (get the proc run time back down to seconds) is to run the engine tuning advisor. We don't even need to apply any of the recommended changes, we just need to run it and the proc performance goes back down to mere seconds.
If we run the profiler again when the proc performs normally, we dont' see any locking going on.
We can consistenly repeat these steps.
Just so we aren't jumping the gun, we have re-written and disected the proc 8 ways to Sunday and it still does the same thing.
Anyone else see this and can offer any suggestions?
View 1 Replies
View Related
Nov 8, 2006
Hi,
When I try to run the asp.net application (C#) it is throwing the following exception.
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"
The problem is I don't have SQL Server 2005 installed in my system. And I am trying to connect a remote SQL 2000 server.
Adding to my confusion, the same code is working fine in another system.
Help please?
View 9 Replies
View Related
Sep 11, 2004
Yes, I am pulling my hair out on this one...................
PROBLEM:When importing from my .sql file, I loose many lines of info in my SQL table. I am using the SQL Query Analyzer to execute the file. The file contains 655,000 rows and 20 columns of data on it.
When I run the full file, the system tells me it does not have enough system resources to execute the request. I broke it down just to see if it could handle a smaller file.
When I create a table and have it insert 10,000 rows of info, it drops 88 lines of data.
When I do the same with 120,000 rows I loose 300 rows of data.
When I run it with 56,000 lines of data on the file, I loose 260 rows of data.
When I do just 1,000 rows or below it is perfect.
I have taken the chunks into Excel and verified the number of lines I was trying to put into the table, and everytime, it showed I had the amount of lines I thought I was trying to import.
When I did a query once the table was created to see how many lines it created, I was always short.
This is what my query consisted of (Let me know if this may be my issue)
SELECT COUNT(*) Col_1
FROM nfo_tablename
GO
I even tried zero column names
Any suggestions??? Am I doing something wrong here? Should I be executing the process in a different way?
Here is the basic idea of what the top part of my "CREATE TABLE" file looks like (Color coded as I see it in my Query Analyzer):
Code:
CREATE TABLE nfo_tablename(
Col_1 Numeric,
Col_2 Character(4),
Col_3 Character(11),
Col_4 Character(25),
Col_5 Character(6),
Col_6 Character(5),
Col_7 Character(3),
Col_8 Character(6),
Col_9 Character(22),
Col_10 Character(2),
Col_11 Character(10),
Col_12 Numeric,
Col_13 Character(9),
Col_14 Character(2),
Col_15 Character(2),
Col_16 Character(2),
Col_17 Character(8),
Col_18 Character(1),
Col_19 Character(25),
Col_20 Character(39),
Col_21 varchar);
insert into nfo_tablename values(1,'DSW','UNIT','002-11-K','','57C','840','674209','PCD W/OVRLY DTI/DTM','P','ESPECIAL',674856,'676--9','CO','','1','','1','0201-11','Manufacturer_Name','T');
insert into nfo_tablename values(2,'DSW','SHELF','002-07','','35C','9','09','UNEQUAL','M','',0,'','CO','','','','1','002-07','Manufacturer_Name','T');
Thank you all for your insight. Any ideas, thoughts or suggestions, would be appreciated. I really need to get this table done so I can get a couple web pages created this weekend that are due Monday.
View 1 Replies
View Related
May 8, 2008
Hi Guys, I am experiencing weird results
SELECT DSNew, DTTM, RQDT
FROM dbo.Feb
INNER JOIN DMSEFL
ON ACTR = DSNew
where cast(DSNew as varchar(20)) = cast(ACTR As varchar(20))
If I run the above query I get zero recs back.
If I substitute a Value then I get the desired results (ie. where DSNew = '93235500') or if I enter (ACTR = '93235500') or if I put (where DSNew = '93235500' AND ACTR = '93235500')
Can anyone suggest a reason why this is happening. I know the records exist on both tables I ran the query in Acess and got the desired resutls.
Thank you,
Trudye
View 4 Replies
View Related
Apr 27, 2006
Vb stores an image (bitmap/jpg) in a SQL2000 image field. For somereason it doubles the size by adding 00 for each byte. But sometimes itdoesn't add 00 (0000.0000) but 01 or 20 or ?? and also the byte thatshould be transferd is changed...So SQLImageData = Imagebyte + 00and sometimesSQLImageData = CHANGEDImagebyte + xx.Some example data: (hex notation):A1 => A1 0003 => 03 00-----------91 => 18 2083 => 92 018C => 52 01Could anybody give me an explanation, because I need to know what ishappening, so I can remove te extra bytes added......I have already a image when I remove the extra bytes, but with somewrong data (on the place where things like 8C => 52 01 happen)....Thx,Geronimo
View 2 Replies
View Related
Jul 20, 2005
Right this has to be a Micro$oft mess-up surely...?I'm running SQL 2k standard with SP3. I have a table which I'm tryingto query using a LIKE operator on a varchar field as follows....WHERE dbo.tbl_pm_projects.SeniorManagerID LIKE '%'....In actual fact the % is passed in by the application when the userselects "All managers" from the drop down list used to select theManager to filter by. If they select a manager's name from the listit becomes LIKE 'ajames' or whatever.BUT - the table currently contains 2972 records. If I take out theWHERE clause the SELECT returns all records - fine - but if I put thewhere clause in it returns only 1682!! I thought the % was meant tomatch, and I quote the SQL server Books Online files here; "Any stringof zero or more characters." Anyone explain to me whats going onhere?TIANiall
View 12 Replies
View Related
Jun 11, 2007
I can access the report server remotely. However, when I try to access via browser locally, no luck. I get access denied.
Some kind of browser diff maybe?
I noticed that on the browsers/machines that work, I have the option of putting the domain in seperately. The browser that doesnt work (on the same machine as the db server and web site) puts the domain in front of the username for me.
Any ideas?
View 1 Replies
View Related
Jul 20, 2005
I need to send the result of a procedure to an update statement.Basically updating the column of one table with the result of aquery in a stored procedure. It only returns one value, if it didnt Icould see why it would not work, but it only returns a count.Lets say I have a sproc like so:create proc sp_countclients@datecreated datetimeasset nocount onselect count(clientid) as countfrom clientstablewhere datecreated > @datecreatedThen, I want to update another table with that value:Declare @dc datetimeset @dc = '2003-09-30'update anothertableset ClientCount = (exec sp_countclients @dc) -- this line errorswhere id_ = @@identityOR, I could try this, but still gives me error:declare @c intset @c = exec sp_countclients @dcWhat should I do?Thanks in advance!Greg
View 4 Replies
View Related
Dec 26, 2007
I have an Execute SQL Task that executes "select count(*) as Row_Count from xyztable" from an Oracle Server. I'm trying to assign the result to a variable. However when I try to execute I get an error:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "RowCount": "Unsupported data type on result set binding Row_Count.".
Which data type should I use for the variable, RowCount? I've tried Int16, Int32, Int64.
Thanks!
View 5 Replies
View Related
Dec 11, 2007
Hi all,
I copied the following code from Microsoft SQL Server 2005 Online (September 2007):
UDF_table.sql:
USE AdventureWorks;
GO
IF OBJECT_ID(N'dbo.ufnGetContactInformation', N'TF') IS NOT NULL
DROP FUNCTION dbo.ufnGetContactInformation;
GO
CREATE FUNCTION dbo.ufnGetContactInformation(@ContactID int)
RETURNS @retContactInformation TABLE
(
-- Columns returned by the function
ContactID int PRIMARY KEY NOT NULL,
FirstName nvarchar(50) NULL,
LastName nvarchar(50) NULL,
JobTitle nvarchar(50) NULL,
ContactType nvarchar(50) NULL
)
AS
-- Returns the first name, last name, job title, and contact type for the specified contact.
BEGIN
DECLARE
@FirstName nvarchar(50),
@LastName nvarchar(50),
@JobTitle nvarchar(50),
@ContactType nvarchar(50);
-- Get common contact information
SELECT
@ContactID = ContactID,
@FirstName = FirstName,
@LastName = LastName
FROM Person.Contact
WHERE ContactID = @ContactID;
SELECT @JobTitle =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN (SELECT Title
FROM HumanResources.Employee
WHERE ContactID = @ContactID)
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE ContactID = @ContactID)
ELSE NULL
END;
SET @ContactType =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN 'Employee'
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN 'Vendor Contact'
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN 'Store Contact'
-- Check for individual consumer
WHEN EXISTS(SELECT * FROM Sales.Individual i
WHERE i.ContactID = @ContactID)
THEN 'Consumer'
END;
-- Return the information to the caller
IF @ContactID IS NOT NULL
BEGIN
INSERT @retContactInformation
SELECT @ContactID, @FirstName, @LastName, @JobTitle, @ContactType;
END;
RETURN;
END;
GO
----------------------------------------------------------------------
I executed it in my SQL Server Management Studio Express and I got: Commands completed successfully. I do not know where the result is and how to get the result viewed. Please help and advise.
Thanks in advance,
Scott Chang
View 1 Replies
View Related
Feb 13, 2001
HI,
I ran a select * from customers where state ='va', this is the result...
(29 row(s) affected)
The following file has been saved successfully:
C:outputcustomers.rpt 10826 bytes
I choose Query select to a file
then when I tried to open the customer.rpt from the c drive I got this error message. I am not sure why this happend
invalid TLV record
Thanks for your help
Ali
View 1 Replies
View Related
May 1, 2008
As the topic suggests I need the end results to show a list of shows and their dates ordered by date DESC.
Tables I have are structured as follows:
SHOWS
showID
showTitle
SHOWACCESS
showID
remoteID
VIDEOS
videoDate
showID
SQL is as follows:
SELECT shows.showID AS showID, shows.showTitle AS showTitle,
(SELECT MAX(videos.videoFilmDate) AS vidDate FROM videos WHERE videos.showID = shows.showID)
FROM shows, showAccess
WHERE shows.showID = showAccess.showID
AND showAccess.remoteID=21
ORDER BY vidDate DESC;
I had it ordering by showTitle and it worked fine, but I need it to order by vidDate.
Can anyone shed some light on where I am going wrong?
thanks
View 3 Replies
View Related
Aug 2, 2007
I am trying to code a WHERE xxxx IN ('aaa','bbb','ccc') requirement but it the return values for the IN keyword changes according to another column, thus the need for a CASE function.
WHERE GROUP.GROUP_ID = 2 AND DEPT.DEPT_ID = 'D' AND WORK_TYPE_ID IN ( CASE DEPT_ID WHEN 'D' THEN 'A','B','C' <---- ERROR WHEN 'F' THEN 'C','D ELSE 'A','B','C','D' END )
I kept on getting errors, like
Msg 156, Level 15, State 1, Line 44Incorrect syntax near the keyword 'WHERE'.
which leads me to assume that the CASE ... WHEN ... THEN statement does not allow mutiple values for result expression. Is there a way to get the SQL above to work or code the same logic in a different manner in just one simple SQL, and not a procedure or T-SQL script.
View 3 Replies
View Related
Apr 7, 2015
I'm using a subquery to return a delivery charge line as a column in the result set. I want to see this delivery charge only on the first line of the results for each contract. Code and results are below.
declare @start smalldatetime
declare @end smalldatetime
set @start = '2015-03-22 00:00' -- this should be a Sunday
set @end = '2015-03-28 23:59' -- this should be the following Saturday
select di.dticket [Contract], di.ddate [Delivered], di.item [Fleet_No], di.descr [Description], dd.min_chg [Delivery_Chg], dd.last_invc_date [Delivery_Invoiced],
[code]....
In this example, I only want to see the delivery charge of 125.00 for the first line of contract HU004377. For simplicity I have only shown the lines for 1 contract here, but there would normally be many different contracts with varying numbers of lines, and I only want to see the delivery charge once for each contract.
View 6 Replies
View Related
Mar 2, 2008
help strange result whan i do this
Code Snippet
SELECT unit_date, unit, ISNULL(NULLIF ((unit + DATEDIFF(mm, GETDATE(), unit_date)) % 4, 0), 4) AS new_unit
FROM dbo.empList
i try to get next unit value to next month
why i get this -1
on date
01/01/2008
1
-1
unit_date unit new_unit
01/02/2008
2
1
01/02/2008
1
4
01/01/2008
1
-1
01/02/2008
1
4
21/01/2008
1
-1
21/01/2008
1
-1
01/02/2008
1
4
TNX
View 3 Replies
View Related
Jan 28, 2008
Hi All, I need to For Each loop tied back to a SQL result set. This is what I have so far, I know its not much but I'm stuck. Thanks soooo much!TimDim conn As SqlConnectionDim comm As SqlCommandDim reader As SqlDataReaderDim connectionstring As String = ConfigurationManager.ConnectionStrings("Magic").ConnectionStringconn = New SqlConnection(connectionstring)comm = New SqlCommand("Select Distinct([_Group_]) from _Smdba_._Groupdet_ Where [_InActive_:] = 0", conn)
Tryconn.Open()reader = comm.ExecuteReader()
For Each (FOR EACH SQL RECORD) 'I'm going to put some code in here.... reader.Close()Catch dberrorlabel.Text = "Error Loading Admin Panel"Finally conn.Close()End Try
View 3 Replies
View Related
Dec 2, 2003
hello everyone,
i have an sql statement which is like this
select f1,f2, ( sum(isNull(f3,0)) - (select sum(isNull(e1,0)) from otherTable where e2=Value) )
from Table where f3 = 4
it works great!
but there is a case it dont work it
when the subquery which is:
(select sum(isNull(e1,0)) from otherTable where e2=Value)
has no result it dont do the subtraction operation and the value is Null although the sum of F3 (which is subtracted from ) has a value
so is there any way i can give the sum value, the value of zero if there is no result in the record set.
and just for knowledge, i tried
sum(isNull(e1,0)
and
isNull(sum(e1),0)
the both cases and also it returns nothing
any one can help :)
Thank you
View 2 Replies
View Related
Mar 13, 2001
In 6.5 I ran a SELECT query with a specific WHERE clause. It gave me a result
set of 430 rows. But when I use the same conditions in WHERE clause in UPDATE,
it updated only 420.
What might be the reason?
Thanks,
Chan
View 1 Replies
View Related
Dec 22, 2006
Hi All
Have you got the same result as I have?
select convert(varchar(15), 0x4861707079204368726973746D6173)
View 2 Replies
View Related
