Win NT Integrated Logging: User Names Have Underscore(_)
Jan 8, 1999
I want to establish logging using NT Security. The problem is that user names in NT have underscore(_). When I establish NT Scurity in SQL security manager, SQL Server tries to add blank names as login id and they will not go through. Is it manadatory to remove underscore from username?
Because of structrual hierarchy, I have different groups in NT to be mapped to SQL Server groups and each group has different permission on SQL tables. In some cases we might have same users in more than one group. I read that it is not possible if you use NT integrated security. Is there any thing that can be worked around this and is this problem still exists in SQL 7.
We have a a DTS package set up to run against another SQL Server. Using an integrated login is there a way to map an NT Authenticated users is the sql server login id mapping to this attached server. The DB we are going against only uses NT authentication to attach to.
Hi, I am able to run an SSIS script from BI Visual Studio no problem, I am also able to connect to SSIS within SSMS successfully. I have system access rights to the Database Engine of the same server name.
However I have a user who also has full system access rights to the Database Engine of the same server name. However he can only connect to the database engine, he cannot connect to SSIS within SSMS, but he can successfully execute a SSIS script within BI Visual Studio which is targeted to the same server name which he can€™t connect to within SSMS.
I am trying to connect SQL database through code but I get this error,I have spent days to solve it but unfortunately I couldn't...Here is my code in VB express(OP:windows 2000 with SP4)I am new to VB,so it makes the situation more difficult for me.
my code is:
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim conn1 As SqlConnection = _
New SqlConnection("Data Source=.SQLEXPRESS;" & _
"Integrated Security=SSPI;" & _
"database=deneme3_database;")
'Open connection
conn1.Open()
MessageBox.Show("Connection succeeded.")
'Close connection
conn1.Close()
MessageBox.Show("Connection closed.")
End Sub
The error message is,it is in german but it is clear I guess:)
" Die von der Anmeldung angeforderte "deneme3_database"-Datenbank kann nicht geöffnet werden. Fehler bei der Anmeldung. Fehler bei der Anmeldung für den Benutzer 'ADPLANatalay'. "
I got a website using .Net v2.0.xxx and SQL Server Express 2005 in a Win2003 Domain Controller machine. Both website and SQLServer is running on the same machine. Website and SQLServer are configured to accept only Integrated Windows Authentication. Domain Users group is added in SQLServer logins list and given Read and Write access to the database used by the website. Also Domain Admins groups is added and given full permission to the same database.
I thought since website will run only with login details from Active Directory, SQL Server connection is also going to be validated against the same login details. But I felt I got the whole concept wrong when I received the error mentioned in subject line.
Can anyone please explain the best way to connect to database in above-mentioned context. Please remember that I need to implement different rights on the database for 'Domain Users' and 'Domain Admins' group. If there is a better approach than using these groups, lemme know please.
Hello everybody,I was configuring a SqlDataSource control using SQL Authentication mode.I first added a database file (testdb.mdf) through Solution Explorer-Add New Items. Then through Database Explorer I created a table named "info"Then while configuring the SqlDataSource control I used the SQL Authentication mode and attached the "testdb.mdf" database file.Test Connection showed success. But when I hit the Ok button of the wizard it displayed the following error message:Failed to generate a user instance of SQL Server. Only an integrated connection can generate a user instance.While configuring the SqlDataSource control I clicked "New Connection". Under Data Source section I tried both Microsoft SQL Server and Microsoft SQL Server Database File. And in both the cases I attached a databese file(testdb.mdf). Plz enlighten me on this.Thanks and Regards,Sankar.
I've got a third party app running atop my sql server instance. When auditing logons in profiler, I see that the user (sa) logs off, and then immediately logs back on. Interestingly, the app logs back on with this user again, and the instance gives it the same spid as it previously had.
Can anyone explain this behaviour, or point me to a place where I can investigate ?
In our sql server we have around 40 windows group. Say a Windows user = "X" This X user does not have a direct windows login, he is present in one or more windows groups registered in the sql server.
I need to know throught which group he is logging in.
If I know this , this will help in my auditing process.
I am using SQL Server Express Edition 2005 as a backend database working with Visual Basic 2005.
I am using Vista and having two users to access to my computer. User-1 and User-2.
I created a database in User-1 and works fine Visual Basic 2005.
Now the problem is when i login to my computer system with User-2. I cannot able to access the database with encountering error like "User-1/SQLExpress". I know that i cannot able to access to database which was created in User-1.
Do you any solution to this problem. when i login with user-1 and user-2 it should able to access database.
I would like to fire a pre execution event, grab the name of the stored procedure (source of the sql task), insert a record with the name and datetime, and then fire a post event that would update the record with a modified dated.
What is the best way to capture the source value name in the execute sql task.
I have a SQL Server 2005 Express edition instance set up on one server, and IIS on another server.
The SQL Server process account is a domain user account, which I have added to the local groups that SQL Server created during installation (I originally used a local user account instead of domain account; however, the problem occurs with both).
SQL Server runs fine, and if I set my IIS application pool identity to a domain admin, my web app can access the database and retrieve the data necessary.
However, I have a domain user account that I want to use to run the app pool and retrieve the data. The domain user account is added to the IIS_WPG group on the web server. On the database server, I have created a login for the account, as well as added it to the db_datareader role of the database that is used for the site.
However, the user is not able to connect to the SQL Server. I get the "Login failed for user <user account>" error in ASP.NET. I also tried connecting with SQL Server Management Studio, and I get the same error. I checked and the user has connect permission to the database server.
With admin accounts, there are no problems logging in, etc.
Any pointers are appreciated,
Thanks,
SA.
Edit: I was able to find out that the State is 11 for the error. According to http://blogs.msdn.com/sql_protocols/archive/2006/02/21/536201.aspx, this indicates "Valid login but server access failure." I am not sure how to resolve this.
I am trying to retrieve the user names of all users within a database. The problem is, that I have only created a login within SQL 7.0 for the NT group that the users belong to.
As such, when I try to query the syslogins table I only get the NT group.
Is there any way of retrieving the users that belong to this NT group.
Any help or suggestions on this would be greatly appreciated.
I create a user then I create a database and assign my newly created user as owner
When I login as this new user everything works fine BUT my newly created user can still see other database names even though he is not allowed to use them.
How can I prevent him from seeing other database names.
We have recently copied a database from one machine to another. On the old machine, when we access the tables we do not need to use the username.tablename convention to query them. On the new box we do.
For example, to query a table called Page we would nee to do this on the new box.
SELECT * FROM webdev.page
unfortunately all the code is written, without the username prefix. Is there a way to not use the username prefix?
Thank you for your help...sorry for the newbie type question.
how to find the names of the tables owned by the particular user in sql server and how to display the distinct object types owned by the particular user.
I am a SSIS novice, and need help to do the following:
Every day a Table is generated by the system of format XR+present Year + present month + present day. My task is pretty simple. I am to devise a SSIS package that will import this table on to a different server.
I have defined the variable as user defined variable. I am also able to specify the variable in OLE db source editor -> Data Access Mode : Table name or view name variable. When I am click the 'Columns' feature, I get the following error
TITLE: Microsoft Visual Studio ------------------------------ Error at Data Flow Task [OLE DB Source [1]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37. Error at Data Flow Task [OLE DB Source [1]]: Opening a rowset for "xr+ convert(char(8),getdate(), 112)" failed. Check that the object exists in the database. ------------------------------ ADDITIONAL INFORMATION: Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap) ------------------------------ BUTTONS: OK ------------------------------
In short can any one tell me a correct way of using a table name as variable in Data Access Mode : Table name or view name variable ?
One other question: can I make use of a dynamic SQL in Execute SQL Task? If yes, how do I write the query
result will be correct (all neccessary data about columns will be provided)
So, looks like if I pass table name which contains underscore via @local_variable or SP parameter - result will be wrong. If table name won't contains underscore - everything works fine and result of script:
declare @tname as char(50) set @tname = 'MyTable' exec sp_columns @tname
Hello All,DDL Statements:CREATE TABLE [dbo].[Table1] ([MyDate] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL) ON [PRIMARY]GOI have a varchar column which represents dates in YYYYMMDD and MM/DD/YYformats. If I query using:SELECT MyDate FROM Table1WHERE DOB LIKE '________'Why aren't the dates in MM/DD/YY returned ? Is the / a specialcharacter in T-SQL ?Thanks in advance
I am developing a package on my local workstation. I have defined two logging service providers. One is for SQL Server and the other is for the Windows Event Log. I am using the Dts.Log method in a script task to write log entries.
Logging is working properly with the SQL Server provider and rows are being inserted into the sysdtslog90 table. However, the only events that are being logged in the Windows Event Log are the package start and end events which I believe SSIS is doing automatically anyway.
Is there something I need to do to enable WIndows Event Log logging other than defining a log provider and making sure it is checked active? Won't SSIS write to two different logs with one Dts.Log call? Any ideas on what might be going wrong with my approach?
Hi, I decided to use the SQL Server log provider to store logging data of all my Integration Services packages. I also created some reports about this data for operating purposes. I have a problem occurs the name of the executing package is not always written to the log,but the name of the single task which failed. But that is not very useful information for operating, because I do not see any chance to get the name of the package by the information which is logged in the sysdtslog90 table in the database which I defined for SSIS Logging.
How do I configure the package to always log the package information into the table, too?
Hello, I want to search a column with all the words deliminate by underscore. E.g. User_id, Community_name, author_id and etc. It seems like freetext only deal with string with blank deliminator. How should I do the rull text search on column like this? Here is the code.declare @var varchar(2000) set @var = 'id' select [name], definition,version_code from dbo.base where freetext([name],@var) thx
I recently read the project real ETL design best practices whitepaper. I too, want to do custom logging as I do today, and also use SSIS logging. The paper recommended using the variable system::PackageExecutionId to tie the 2 logging methods together.
I am designing a package to export staging tables into a flat file.The names of the tables will be: TableAStaging_YYYYMM and TableBStaging_YYYYMM. As you can see the names of the tables will be changing each month.
The flat files will have similar naming: C:MyPathFlatFileTableAStaging__YYYYMM and C:MyPathFlatFileTableAStaging__YYYYMM.I want to run the package as an sql job in two steps, one for each table.I need to dynamically pass the table names and file names (together with the path) to the IS package.
