i have a windows 2003 server up and running and a client workstation connected via a crossoever cable. they both can ping each other.
my next step, i would like to replicate a "real world" scenario where i have the database engine and the sample databases on the server and i would like to be able to write to and from the cleint to main database which is going to be on the server.
so my question is, do i need a full install on both machines?
I have a Windows 2003 Enterprise x64 edition cluster setup and functioning normally. Now, I am trying to get SQL Server 2000 installed as a failover cluster but am having some difficulty. When installing, I get the message '[sqsrvres] ODBC sqldriverconnect failed' in the event log. The message happens when the installer is trying to bring the SQL Server Service resource online.
I am able to ping the name of the instance successfully. I am able to manually start the 'MSSQL$InstanceName' service. I have turned off the firewall on both machines, but this did not help. I have the DTC Service setup as a resource in the same cluster group.
I also read http://support.microsoft.com/default.aspx?scid=kb;en-us;815431 which seemed promising, but did not reolve the problem.
I need a hand here, referring to this knowledge base on Microsoft (http://support.microsoft.com/default.aspx?scid=kb;en-us;Q283811) i applied this knowledge base, and it worked, the MSSQL and SQLSERVERAGENT have run under local non admin account.
But after i installed SP1, MSSQL service is ok, but SQLSERVERAGENT wont run. The warning message is : "Some service run and then stop if they have no work to do."
Is there any way i can install SP1 but in the same time run SQLSERVERAGENT under local non admin account?
Windows 2003 Server and all client PCs are all on the same network. I installed SQL 2005 std version on windows server 2003 and created a database and tables in it.
I have two users, who want to connect to SQL server 2005 from their PCs (they have windows XP):
These are two things that I need to facilitate:
1) They want to be able to write queries using Query Designer and run from their PCs.
2) I created an MS Access database on my PC, I want to use Access database as a front end to the SQL server database. I will create queries, forms in Access DB, and I want to be able to get the data from SQL server Database to do this. I guess I can use ODBC to connect to tables in SQL server database.
3) I want to connect SQL server to Oracle database, and run oracle stored procedures. I want to load the results of oracle stored procedures into SQL server database tables. I guess I will use IIS for this.
Any suggestions are appreciated, especially with item number 1.
I have installed SQL server 2005 enterprise edition on Windows 2003 virtual PC (full installation). The installation went through successfully. However, after install completed, I cannot find any of the client tools under the start menu -> all programs -> Microsoft SQL server 2005 menu. The only item listed under the SQL server 2005 is Configuration Tools, which is used to configure the database server.
I have tried to install the client component again (in case I didn't install them at the first place) but the installation process cannot be started since it detected that the client components have been installed already. I can also see the sql server native client running in the services.
The server engine is working fine since I can connect to that sql server using another machine where I have the client tool (SQL server management studio).
One of my friends has exactly the same problem. He installed the sql server 2005 Standard edition on windows 2003 server (full installation), but the client tools are not showing up in the start menu either.
I also checked the location for the SQL server management studio (Microsoft SQL server/90/Tools/Binn/VSShell/Common7/IDE), there is only one folder called publicAssemblies listed under. Is this correct or something is missing?
i am facing problem in the installation of SQL Server 2005. I am installing sql server 2005 on Windows Server 2003 with SP1. When I start the setup error occurs. It says, Microsoft Windows Installer 3.0 is not installed. I think Windows Installer comes with windows server 2003. what should i do now..
I found sql2005 Enterprise cannot be installed under Simplied Chinese win 2003, the only thing i suspect is that win2003 is an envaluation copy with netframework 2.0 be installed.
i have the same problem with dotnetnuke installtion in 2003 server sp 1 that it can't connect with the database the message below is appearing in my url:
Error Installing DotNetNuke Current Assembly Version: 04.03.04 ERROR: Could not connect to database specified in connectionString for SqlDataProvider even i uninstall the sql server 2000 but still this problem came . on the other hand i installed it to windows Xp it works there. i dont know what to do and here is my connection string:
<connectionStrings> <!-- Connection String for SQL Server 2005 Express --> <add name="SiteSqlServer" connectionString="Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|Database.mdf;" providerName="System.Data.SqlClient" /> <!-- Connection String for SQL Server 2000/2005 <add name="SiteSqlServer" connectionString="Server=(local);Database=DotNetNuke;uid=;pwd=;" providerName="System.Data.SqlClient" /> --> </connectionStrings> can anyone help me !
Hello, pls Some of my factory guys can log on the same user name at the same time, so I want a situation where a user name may be able to log on, one at a time. Whoever that is reading this, note this is not a misplacement, this is the fact that I don't have means of solving it, I am also of opinion that some have full knowledge of windows 2003 server
We have purchased Windows 2003 Small Business Edition Premium.
Our company uses Analysis Manager / Analysis Services and also MDX functions. However Release2 only appears to have SQL 2005 Workgroup edition with it and these features do not seem to be present.
Does anybody know how I upgrade to get these functions? I don’t know if these functions can be downloaded or whether we have to upgrade by purchasing SQL Server Standard 2005 edition outright?
Hi,I am unable to connect to a database in my SQL 2000 Server installed ona Windows 2003 Server machine from an asp page. It gives the thefollowing error:Microsoft OLE DB Provider for SQL Server (0x80004005)Login failed for user 'sa'. Reason: Not associated with a trusted SQLServer connection.I also sometimes get:MSDataShape (0x80004005)Data provider could not be initialized.I can connect with the same connection string and parameters from avisual basic 6 application.I can also connect the web client with the same DB in SQL 2000 runningon Windows 2000/XP.The authentication mode is mixed.I believe it is something to do with security. Please advise me on whatto do. It is very urgent.
I have a client requiring SQL 7.0 installed on Windows 2003 Server Std. Just wondering if its supported and possible to install SQL 97 on Windows 2003 servers.
compare to ms sql 2000, the newer version seems to be slow when i tryto open or modify a table. is this a demerit of the newer vesion or mymachine problem?
Hi! Is there a separate set of files in the installation CD of MS SQL Server 7 which can be used to install a SQL Server Client installation? Thanks in advance! Bye!
Hello y'all, I have to do a new install of SERVER 2000 using WINDOWS 2003 . Has anyone done this. If so, what are the steps. Should I expect any problems ? Any help appreciated. Thanx
I have been searching the net and haven't found anything that has worked so far for resolving this issue, hopefully someone on here can provide some insight?
I did a fresh install of a Windows 2003 Standard Edition server (as part of a workgroup, not a domain..the server is only temporary for testing) and installed MSDE 2000A (the version that contains all current service packs). I can use the MSDE server locally on the server without any issue...however when I try to connect to MSDE with a workstation, it tells me that Access is denied or the Server does not exist.
The ICF is disabled, and all passowrds being entered have been checked, however I still can not connect to the sql server. Does anyone have any ideas on this or run into this problem before?
I have XP workstations and windows 2003 SBS. I setup an ODBC for anapplication (tried both User and System DSN), but after a few usage, I getthe following error:Connection failed:SQLState: 'HY000'SQL Server Error: 0[Microsoft][ODBC SQL Server Driver]Cannot generate SSPI context.Any ideas? Is this a bug?--Thank youPlease post only
I have been searching the net and haven't found anything that hasworked so far for resolving this issue, hopefully someone on here canprovide some insight?I did a fresh install of a Windows 2003 Standard Edition server (aspart of a workgroup, not a domain..the server is only temporary fortesting) and installed MSDE 2000A (the version that contains allcurrent service packs). I can use the MSDE server locally on theserver without any issue...however when I try to connect to MSDE witha workstation, it tells me that Access is denied or the Server doesnot exist.The ICF is disabled, and all passowrds being entered have beenchecked, however I still can not connect to the sql server. Doesanyone have any ideas on this or run into this problem before?
I have a windows server 2003 R2 sharing a filesystem using NFS. I have created a group and passwd file and mapped the ids' to the unix login ids' . I', able to mount but when I try to cd to the directory I get "NFS access failed for server testsrvr: RPC: Authentication error". On the win2k3 server I'm getting an event error "There was a mapping failure". I have the Admin id on the win2k3 server mapped to the unix root login .
I am following the MCTS Self-Paced Training Kit for Exam 70-431 (implementation and maintenance of sql server 2005) and one of the prerequisites is that I have Microsoft Windows Server 2003 running on my computer on an NTFS file system (NTFS) partition. Now am I right in thinking Windows Server 2003 is an operating system. If it is can I install it alongside XP Professional which I am currently running. I am currently afraid to go ahead with the installation as I am worried it will overwrite XP, which would be disastrous as I have a great deal of data on it.
I have a problem i have been working on moving sql2000 databases to 2005. I have two servers running on one machine. Is there a way to make my 2005 server a default server
I want to make 2005 a default server instead of 2000. Because in my connection string from the applications i connect to server using external ip & it's connecting to 2000 instead of 2005.
I have SQL Server 2000 running on Windows 2003 Server. I have Windows 2000 Server running IIS. I am trying to connect my asp running on 2000 to my SQL Server running on 2003, but I run into the problem when I have to machines connecting to the database. The first machine works, but the second machine comes up with the page is not found. When the first machine is done with getting the data, I am able to refresh on the second machine and it works. Some reason it is only allowing one connection at a time on the same database. Any help would be greatly appreciated. Thanks
I am trying to do a new install on Windows Server 2003 R2 (32 bit). I have a disk (DVD) that contains SQL 2005 Standard edition in two folders, Disk 1 and Disk 2. It also has SP1 in a third folder.
First, it will not auto-play. I can find the "splash.hta" file, and when I run it, I get the splash screen that says SQL 2005 install, disk 1 of 2. If I use the options that I was told to by my electronic medical record software company, the installation begins and goes ok. It installs about 2/3 of the components, and then says "Please insert disk 2." I do not have a second disk!!
I even tried copying each folder, Disk 1 and Disk 2 to two separate CDs and tried to install that way. I still get "Please insert disk 2" and the installation will not complete?
I'm trying to install SQL Server 2000 client tools on an XP workstation.MSDE already exists on the workstation. During the install I am neverprompted for a location to install to. I want to install to my D drive. Theinstall defaults to my C drive.Any thoughts?
Iam a new bee to sql server.I have Installed sql server 2005 ( trail software ) in my Server.I like to install sql server 2005 clinet in another system. Where can i download sql server 2005 client??
My requirement is , i should access sql server database from my client...
Wondering if there is a different way to setup mail because of Windows Server 2003 instead of Windows Server 2000? The server I'm being asked to get mail working on will have an exchange email account and I'm not familiar with setting this up. On my 2000 machine I had to use Outlook 2000 with option for Corporate or Workgroup an a POP email account. Any help is appreciated.
