Windows 64 Bit And Oracle
Apr 20, 2006
Hi,
I've just installed SQL Server 2005 onto a new Windows 64 bit server and am trying to set up Oracle connections (we have an Oracle 8i database) in SSIS with no luck.
Has anybody had any luck in this area? We currently have the Oracle 10g client installed with nothing else.
When I attempt to use the OracleClient Data Provider in BIDS I get the following error:
------------------------------
Test connection failed because of an error in initializing provider. Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
------------------------------
When I try to use the Microsoft OLEDB Provider for Oracle in BIDS I get this error:
------------------------------
Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
------------------------------
Do I need to have a 32 bit client installed along with the 64 bit client? When we initially had the 32 bit client installed I was constantly getting errors about being unable to resolve TNS names and I did some reading that said this was due to problems with the (x86) folders and Oracle having a bug with parsing these folders but couldn't really find any clear cut resolution.
Any help would be greatly appreciated as I've been butting my head against a wall on this for a while now.
Thanks in advance,
Nathan.
View 1 Replies
ADVERTISEMENT
Apr 25, 2008
I am currently having issues getting the odbc32ad driver configured properly so I can transfer the database off of the old Oracle 7 database (currently running SCO UNIX). I have the orignal Oracle 7 disk and installed the drivers, but I am not sure what the SA login for Oracle is, nor do I know what the "Connection String" is.
Has anyone made this transfer before? Please help.
View 3 Replies
View Related
Jan 23, 2007
I am trying to pull data from an Oracle 9i database to my SQL Server 2005 sp1 database on Windows 2003 64bit Itanium server. Each time I try to use the import wizard, select the Microsoft OLE DB driver for Oracle, I get an error message telling me that the Oracle client tools are not installed. This happened after I had already installed the 9i tools, tested the connection using TNSPING and confirmed the tnsnames file was correct. So, I uninstalled the 9i tools and then installed the 10g client tools. Tested everything after the install and then tried the import again selecting the MS OLE DB driver for Oracle. I again got the error message that the Oracle tools were not installed.
has anyone ran into this problem and if so, were you able to fix it?
View 2 Replies
View Related
Jul 23, 2005
Hi, all...I have a sizeable database running under Oracle 9.2.0.4 under AIX5.2.0.I am faced with an impending move to a Windows environment, runningunder SQL 2000.Currently, we are heavy users of shell scripts, for exports, backups,etc.I am looking for viable scripting options under W2K/W2K3. Maybe sh/kshemulators, VB, Perl...?Scheduling of script operations is also required.Anyone been through this kind of move, who could offer some wisdom?Thanks!DW
View 19 Replies
View Related
Mar 19, 2008
Can I create ODP.NET connection in my SSIS connection manager. I had downloaded and installed ODP.NET on my server provided by oracle. The idea is I need to test this provider and see what is the difference connecting oracle database and the data load speed.
thank you
View 4 Replies
View Related
Oct 24, 2006
God morning!
I 've just installed SQL Server 2005 on Windows 2003 Server 64 bit. One of my databases need to connect to seveal Oracle databases.
- I tried installing 64 bit Orcale 9 on this server. Got a strange message that the application (Oracle 64 bit) could not be installed on a 32 bit server! Strange!
- I installed Oracle 9 32 bit on the server, but I could not find ODBC driver in the Data sources! Neither the oledb under providers in MSS Manager Studio!
- Same result efter several desintall and installation. A college copied the .dll files och run a script to register the dll files. We could then se the Oracle driver in the Database sources, but we could not create any connection.
- We have even tried an 10G version of Oracle with the same result.
Is there anyone who succeeded installing Oracle on 64 bit Windows and could create odbc connection/linked server?
Regards
View 24 Replies
View Related
May 8, 2007
I was a Oracle Developer / DBA on Unix Environments all along my career, Very recently iam starting to manage a SQL Server 2005/Windows 2003 Server setup.
Part of my new job is to automate to load Huge Data files/Flat Files (3/4 GB in size) into SQL Server 2005 DB.
Have these initial questions..
Since the files are too large to open at once... What sort of Command Line Interfaces people use on the Windows Boxes.. like doing a "wc" (Word Count) / GREP 'ng Files / Massaging Data Files one line at a time (Like using SED / AWK Commands).. Etc
Any Input / Direction is appreciated...
View 4 Replies
View Related
Sep 12, 2007
I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query?
Thanks.
View 4 Replies
View Related
Apr 2, 2007
Hi!
I'm loading from Oracle using the OraOLEDB.Oracle.1 provider since I need unicode support and I get the following error:
TITLE: Microsoft Visual Studio
------------------------------
Error at myTask [DTS.Pipeline]: The "output column "myColumn" (9134)" has a precision that is not valid. The precision must be between 1 and 38.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0204018 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
For most of my queries to Oracle I can cast the columns to get rid of the error (CAST x AS DECIMAL(10) etc), but this does not work for:
1) Union
I have a select like "SELECT NVL(myColumn, 0) .... FROM myTable UNION SELECT 0 AS myColumn, .... FROM DUAL"
Even if I cast the columns in both selects (SELECT CAST(NVL(myColumn, 0) AS DECIMAL(10, 0) .... UNION SELECT CAST(0 AS DECIMAL(10, 0)) AS myColumn, .... FROM DUAL) I still get the error above.
2) SQL command from variable
The select basically looks like this:
"SELECT Column1, Column2, ... FROM myTable WHERE Updated BETWEEN User::LastLoad AND User::CurrentLoad"
Again, even if I cast all columns (like in the union), I still get the same error.
Any help would be greatly appreciated. Thanks!
View 10 Replies
View Related
Oct 26, 2006
Is there any step by step help sites for setting up SQL 2005 linked (oracle 10) server?
I find MSDN articles but they referance winNT and 2000, I'm not getting very far and I'm not a DBA but need to get this working asap.
View 1 Replies
View Related
May 8, 2015
we recently got a scenario that we need to get the data from oracle tables which is installed on third party servers. we have sqlserver installed on ourservers. so they have created a DBLINK in oracle server to our sqlserver and published the DBLINK name.
what are the next steps that i need to follow on my sqlserver in order to access the oracle tables ?
View 2 Replies
View Related
Feb 22, 2006
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
View 17 Replies
View Related
Jan 12, 2006
Hi,
I am trying to make an oracle publiching from sql server 2005 enterprise final release, i installed the oracle client 10.2 (10g) on the same server where sql server already installed, i made different connection to oracle database instance and it was ok.
from sql server : right click on publication -New oracle publication-Next-Add Oracle Publisher-Add button-Add Oracle Publisher-i entered server insttance test1 and their users and passwords--connect --->
the oracle publisher is displayed in the list of publisher but when press ok i got the following error :
TITLE: Distributor Properties
------------------------------
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server could not enable 'test1' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The permissions associated with the administrator login for Oracle publisher 'test1' are not sufficient.
Changed database context to 'master'. (Microsoft SQL Server, Error: 21684)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21684&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Any idea about this error ?
Thanks
Tarek Ghazali
SQL Server MVP.
View 2 Replies
View Related
May 11, 2007
Hi Everyone,
I've been searching for a solution for this for a week-ish, so I thought I would post my quesiton directly. Here is my scenario..
Source: MS SQL Server
Destination: Oracle 10g
The destination table has a partition set on a column called "DATE_HIGH". How do I populate this date high column in my package? Currently I just have a source object, and a destination object, but I'm unclear how to populate this field in the destination. I've read one blog that states "use OLE DB Command" - but that isn't enough information for me to implement - Can someone be more specific in these steps? Here is an example of what my newb-ness needs to understand
OLE DB Source (Select * from Table) ---> OLE DB Command (What query goes here?) --> OLE DB Destination.
Second part of my question: There is a second column called "ROW_NUM" and there is an Oracle Sequence provided to me... What objects do I need (Source, Destination, OLE DB Command etc...) and how do I call this sequence to populate on the fly as I'm loading data from my source?
If these are simple questions - my appologies, I am new to the product.
Best Regards,
Steve Collins
View 1 Replies
View Related
Aug 23, 2007
Hi everybody,
I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails.
I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server.
Please suggest me wht should i do know?
Thanks in advance
Regards
Arvind L
View 3 Replies
View Related
Jan 11, 2007
Hi--
I am running SQL Server 2005 on Win2k3:
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.086.1830.00 (srv03_sp1_rtm.050324-1447)
Microsoft MSXML 2.6 3.0 4.0 6.0
Microsoft Internet Explorer 6.0.3790.1830
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790
I have the OraOLEDB.Oracle provider installed to the (C:oraclexe) directory.
I am having problems querying from linked oracle server. When i setup oracle as a linked server and purposely enter an incorrect password the query i run tells me i have an incorrect password. So it at least knows that. when i set the correct password and run a query I get this error:
(i replaced the real server name with "someServer".)
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer".
This is how I set up my Linked server:
Provider: "Oracle Provider for OLE DB"
Product Name: SomeServer
Data Source: SomeServer
Provider String: "Provider=OraOLEDB.Oracle;Data Source=SomeServer;User Id=MyLogin;Password=MyPassword"
The query I run is:
Select * from [Someserver].[schema or database]..[tbl_name]
Any help??? What am i missing?
View 3 Replies
View Related
Apr 23, 2007
Oracle and MS drivers do not support parameterized queries, so update table set column=? where primarykey=? does not work for Oracle.
Anyone knows how to update an Oracle table through SSIS?
Thanks!
Wenbiao
View 5 Replies
View Related
Oct 29, 2005
need a clue about how to migrate the data from an Oracle applications 11.03 and underlying Oracle 8.05 database to navision 4.0 running sql server 2000
tia
View 1 Replies
View Related
Dec 12, 2007
Is it Possible adding Windows (activi directry users) from SQL Server which is running Windows authotication.?
View 4 Replies
View Related
Jun 23, 2006
I am attempting to write a Windows service that watches a database for uploaded files to import. When a new file is found, the corresponding SSIS package is run from the file system with variables passed through. I started development as a Windows app and copied the functionality to a service.
The app runs fine. The service does not. I get a "Failure" each time a package is executed. Everything is identical behind the scenes with the obvious exceptions that OnStart and OnStop handlers are buttons in the app. I added a script task at the beginning of one of the SSIS packages to notify me that it is even running at all. It doesn't even hit that initial task.
Again, the app will run all packages just fine. The data is imported and the results return as "Success."
The following is the code executing the package. Any help is appreciated. I've been banging my head on this one for a few days now. (Is there a tag to format a code sample?)
Dim pkgLocation As String
Dim pkg As New Package
Dim app As New Application
Dim pkgResults As DTSExecResult
pkgLocation = sPackageFolder & PackageName & ".dtsx"
pkg = app.LoadPackage(pkgLocation, Nothing)
Dim vars As Variables = pkg.Variables
vars("ImportId").Value = ImportId
vars("ProductionServer").Value = ProductionServer
vars("ProductionDatabase").Value = ProductionDatabase
vars("SourceFileName").Value = FileName
vars("SourceFilePath").Value = FilePath
pkgResults = pkg.Execute()
View 3 Replies
View Related
Apr 14, 2008
Long story short -
Have two C# applications - one WinForms desktop app, the other a WinForms smart device app. Both use SQL Server Compact CE 3.5 to store data locally. Both work just fine.
Now the desktop app needs to open and update the .SDF file that is stored on the Windows Mobile device. (Device will be docked via USB.)
What format would the path to the .SDF look like that the WinForms application would need to specify in order to open it?
Thanks for reading.
View 3 Replies
View Related
Mar 26, 2008
Hallo there,
I just upgraded from Windows XP Pro to Windows Vista Bussiness and tried to reinstall SQL Server 2005 Developers Edition. After the installation i downloaded (using microsoft windows update) and installed all the service packs for sql and vista available.
My problem is when i open sql server management studio and try to connect to my default instance using windows authentication and database engine, an 18456 error occurs.
I enabled all the protocols and all the ports
I disabled windows firewall and antivirus (eset nod32)
I installed all service packs available
I have also installed Visual Studio 2005 without installing sqlexpress
But nothing happens!
Please i am very desperate, any information will be gratefully accepted.
This is my installation Information
Code Snippet
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 6.0.6001.18000 (longhorn_rtm.080118-1840)
Microsoft MSXML 3.0 5.0 6.0
Microsoft Internet Explorer 7.0.6001.18000
Microsoft .NET Framework 2.0.50727.1434
Operating System 6.0.6001
Thank you in advance,
Patonios
View 3 Replies
View Related
Mar 14, 2008
My application which ran perfectly well yesterday suddenly stopped working in this morning with following error message. I didn't change anything, at least I believe. Interesting thing is that I don't use any Oracle connection but connects to MS SQL Server 2005 Express version locally. Error messages are different according to the connection string though I don't think it makes difference:
ConnectionString = <add key="Databasehandtool1" value="Data Source=.SQLEXPRESS;Database=handtool;SSPI=true" />ErrorMessage from VS2008 ="Unable to get records. Object reference not set to an instance of an object."
ConnectionString = <add key="Databasehandtool1" value="Data Source=.SQLEXPRESS;Database=handtool;User Id=handtool_DB;Password=mypassword" />ErrorMessage from VS2008 = "Unable to get records. Unable to connect to database. ORA-12154: TNS:could not resolve the connect identifier specified." By the way, the application was generated from IronSpeed 5.1 Enterprise. My development environment is : VS2008, SQL2005 EXPRESS, Windows XP SP2, ASP.NET 2.0
We have actually an Oracle server in the network though. My gut feeling is that something might have changed in my network server during the night but how come it can possibly affect my application running on my local PC. I checked the connection of local SQL Express Server from SQL Server Management Studio and it connected well with UserID=handtoo_DB and showed all tables and stored procedures required for the application. So there is no problem in SQL Server database side.
I would welcome and appreciate any input.
fudata
View 1 Replies
View Related
May 2, 2007
Hi,
This might seems a little 'out there', but has anyone tried doing ETL from an Oracle 10g ODS into an Oracle 10g DW, and from there into SSAS2005 cubes?
Any caveats houghtscomments on doing this?
Thanks,
JGP
View 1 Replies
View Related
Jul 20, 2005
Hi all,I have a Windows 2003 server, which is also a terminal server forapplication, with sql 2000 installed. My company has developed anapplication that uses SQL 2000 as its database. The application is aclient/server one. In each client computer there's a link to theapplication on the server. There is no problem with Windows 98,Windows 2000 pro, Windows xp pro clients, but the windows 95 onescannot log in to the database. The log of the application shows thefollowing error:connection error -2147467259. Cannot open database requested in login'database name'. Login fails.Till a week ago the application was running on a Windows 2000 serverwith SQL 2000 install and the W95 clients had no problem connecting tothe database, so my guess is the error has something to do withWindows 2003 server, but what'causing the error?I tried to install a newer version of MDAC (MDAC 2.5, the last versionof MDAC you can install on W95)but with no success. By the way W95clients have no problem accessing shared folder on the Windows 2003server.Any idea?ThanksMarino
View 1 Replies
View Related
Apr 17, 2008
Does any one come across any difficulty in the following migration?
OS: Wondows Server 2K
DB: SQL Server 2K Standard Edition
Migrating to
OS: Wondows Server 2K3
DB: SQL Server 2K Standard Edition
Thank you,
Gish
View 4 Replies
View Related
Jul 12, 2006
How can I Port Driver and OAL code of Windows CE 5.0 to Windows CE 4.2?
If anybody have idea about this, kindly give me suggestions.
View 1 Replies
View Related
May 25, 2001
We just moved the back end of an Access db to an SQL server and upgraded to Access 2000. A strange problem has arisen. The execution of a query in a certain function seems to be causing the function to prematurely terminate (that is, the query does not complete, and the function does not execute beyond the execution of the query). This error occurs only on workstations loaded with Windows 98. Windows 2000 users are unaffected, and the function runs uninterrupted. The query in question contains date parameters. On the SQL server, dates are enclosed in single quotes (')'s, whereas in Access they are enclosed in pound signs (#)'s. When a query is sent by Access to the SQL server, it is filtered through a program that converts the Access format to SQL-friendly code. Our theory is that this process fails to occur on the machines running Windows 98. Does anyone know why this is occuring?
View 2 Replies
View Related
Oct 12, 2004
We have an installation of MS SQL Server (MSDE actually) runnning on a group of Windows 2k machines. Due to IT constraints at the customer site, we are using Windows authentication, but it is all done with local user accounts, not domain accounts.
We have the same user account witht he same password locally created on each machine. This works fine with all the Win2K machines (not the best solution, but under the client's insane IT department, it's all we were allowed to do).
The problem is that we tried to add an XP machine. While we can connect to a DB running on a 2K machine from the XP workstation, the XP system will not accept connections from the 2K systems. We have done a little research and think we have found out why- the 2K systems are sending usernames for authentication, but the XP is looking for the UID- which is different on every system.
We cannot go to SQL authentication, and we cannot use Domain authentication. Is there a way to change XP to authenticate from username instead of UID?
Thanks!
Jed
View 1 Replies
View Related
Aug 10, 2001
I currently have a DTS package that will transfer tables from an Oracle db to SQL 7. I am using the Oracle ODBC connection and have connected with the owners login and password. When I run the package through DTS, it runs successfully. However, when I try to run it as a scheduled job, it fails each time. I assume that this has something to do with connecting to Oracle. It's hard to figure out because SQL says only that the job failed. Has anyone else run into this issue?
View 1 Replies
View Related
Oct 24, 2000
I need to write a direct pull dts package from an oracle database to a SQL database. What version of sql do I use? PSQL or TSQL for the queries and updates?
View 2 Replies
View Related
Oct 11, 1999
Can i have both databases on one machine ?
They are used for ASP on internet.
/Mattias
View 1 Replies
View Related
Nov 26, 2001
I to import a large number of tables and data from ORACLE into SQLServer 7.
Does anyone have any pointers?
(I'm new to this!)
NT
View 1 Replies
View Related
