Windows Server 2008 And SQL Reporting Services 2005
Feb 4, 2008Quick question; is SQL Reporting Services 2005 fully compatible with Windows Server 2008 / IIS 7 that RTM'd today?
View 1 Replies
ADVERTISEMENT
Trying To Configure Reporting Services SQL 2005 On Windows 2008 Server With IIS7
Apr 21, 2008Hi,
I have a Windows 2008 server 64-bit SP1 and I have installed SQL 2005 SP2 Enterprise Edition 64-bit. My current version is 9.00.3042.00. I am trying to configure Reporting Services and I am having lots of trouble getting the Application Pools to work properly. I have followed the Microsoft Technet paper 839480 "How to Install and Configure Reporting Services on Windows Server 2008". In the "Configure Reporting Services" part, I have successfully configured everything (all arrows are green) and have the following setup:
Report Server Virtual dir: ReportServer Default Web Site
Report Manager Virtual dir: Reports Defualt Web Site
Windows Service Identity: ReportServer with a service acct login
Web Service Identity:
Report Server: ReportServer,
Report Manager: DefaultAppPool (I get an error when I try to configure it to anything else: ReportServicesConfigUI.WMIProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
The one thing I notice in the SQL Server configuration manager is that there is a red dot next to the SQL Reporting Services services even though the green arrow is there to show it is running.
When I look in IIS7, I see the application pools Reports and ReportServer and they are both in Integrated mode. When I try to go to http://localhost/reportserver, it gives an error. It will work if I change both application pools to classic. But then when I try to go to http://localhost/reports, I get an error:
"REQUEST IS NOT AVAILABLE IN THIS CONTEXT".
I have read up on IIS7 and it says that:
"This error is due to a design change in the IIS7 Integrated pipeline that makes the request context unavailable in Application_Start event. When using the Classic mode (the only mode when running on previous versions of IIS), the request context used to be available, even though the Application_Start event has always been intended as a global and request-agnostic event in the application lifetime."
So, how do I configure these application pools to work using IIS7 with SQL 2005 Reporting Services on a Windows 2008 server? I have tried all kinds of different things based on what I am reading on the net and nothing is working. Anybody have any suggestions?
Thanks!
Isabelle
Windows Server 2008 Enterprise && SQL Server 2005 Reporting Services
Mar 12, 2008
Does anyone know how to properly install SQL server 2005 express reporting services on windows server 2008. When ever i try to access the report manager I get an error "Cannot access the remote server" even though the report server is on the local machine. I only have the web server role installed on the server. Im still quite a newbie at managing servers so please keep it as simple as possible.
Thanks
Matthew
Impossible To Check Reporting Services Box On Install [Windows Server 2008]
Jan 29, 2008Hye all, running WHS 2008, I try to install SQL Server 2005 with reporting services, but on install, in "components to install" wizard, the reporting services box is hided. I can't check this box :/ Do you know whats wrong ? if anyone knows the problem, thanks in advance.
View 1 Replies View RelatedSQL Server 2005 Reporting Services On Windows Vista
Jun 13, 2006Hello out there!
I've tried to install all features in the SQL Server 2005 to run on Windows Vista. The Reporting Services failed to install. I think it is because of the IIS 7.0 that 's not recognised by SQL Server.
Is there anyone who have had the same problem and is there anyone who have a suggestion to solve this problem?
Reporting Services 2005 On Windows 2000 Server
Mar 19, 2007Hi,
I successfully got SQL 2005 Express with reporting services running under VISTA. Developed some reports in the VISTA environment. However, my target system is a Windows 2000 server. We installed SQL 2005 w/reporting services onto the Windows 2000 server. SQL2005 Database is up and running. Reporting Services are running, IIS RRS virtual directories are built, RRS databases are built. I can do everything except deploy reports from Business Intelligent Studio. I can preview reports, just cannot deploy. The Reporting Services indicate 1 failure in its configuration; the Web Service Identity. It is loaded with <server>ASPNET. I cannot get rid of this error. I assume this is the problem. After digging around I found that Windows 2000 does not have an ASPNET user, it uses the IWAM user instead. Reporting services did not run at all till I changed the rs config file and put the IWAM user in as <WebServiceAccount>.
Does anyone have Reporting services 2005 running on Windows 2000 server? Anyone know how to fix the Web Service Identity error I am getting?
Thanks
SQL Server 2005 Express && Windows Reporting Services
Feb 28, 2006Hi,
I've just installed SQL Server Express 2005 on our shiny new Windows Server 2003 R x64 server. It has an Intel 830 D chip that uses x86 and 64EMT.
Problem is that I get the message "64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit)."
Is there any way that I can remedy this?
Thanks in advance
Robert
Reporting Services :: SSRS Properties Greyed Out In SSMS On Windows 2008
Oct 17, 2008Have installed SQL 2008 on Windows 2008 and have come across a strange issue.
Â
When connecting to the Report Server cvia SSMS to enable "My Reports" (for example) the Report Server Properties are greyed out and we cannot alter them. This occurs when logged on both locally & remotely to the Win 2008 server.
Â
Interestingly, we have another (XP Pro) box with SQL 2008 on it. If we connect to the Win 2008 SQL report server from the XP machine's SSMS, then we have full control and can access and change the report server properties on the Win 2008 server.Â
Â
The relevant domain accounts are in the Admin group on the Win 2008 server and the XP Server so we are confused as to why we cannot edit the Win 2008 report server properties locally.
Can I Upload A Report From Reporting Services 2008 Into SQL Server 2005?
Jan 28, 2008Would that be compatible or do I need SQL Server 2008 to display the report?
Thanks,
Steven
SQL Server Reporting Services 2005 Service Would Not Start On Windows Server 2003
Dec 13, 2007SQL Server Reporting Services 2005 Service would not Start on windows server 2003. Working great till yesterday and no changes were made to config file.
Here is the error in Event log
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 12/13/2007
Time: 8:25:59 AM
User: N/A
Computer: XXXXXXXXXXX
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime)
at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Here is i found in log files
ReportingServicesService!resourceutilities!4!12/13/2007-08:25:59:: i INFO: Running on 0 physical processors, 1 logical processors
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Exception caught loading and setting code permissions policy level: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Error Starting Service: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
at Microsoft.ReportingServices.Library.ServiceController.StartService(Boolean firstStart)
How Do I Configure SQL Server 2005 Reporting Services To Deliver Subscription E-mails To Addresses External To My Windows Domain
Jun 10, 2007Can anyone help me with a problem I have with SSRS 2005? How do I configure SQL Server 2005 Reporting Services to deliver subscription e-mails to addresses external to my windows domain?
I've been having trouble configuring the Report Server e-mail delivery component to send subscription e-mails to addresses outside the domain on which the report server is hosted.
For e.g. since my local windows domain is named "smartsystems.com", I have found that the Report Manager does not have any problems sending subscription mails to "eawagu@smartsystems.com" but throws up an error whenever I include "eawagu@yahoo.com" in the recipients' list.
Any insights?
Can I Run SQL Server 2008 - Reporting Services CTP Until Microsoft Sells SQL 2008
Mar 31, 2008There are a few features in the new SQL Server - Reporting Services that I really need in production. I have tested everything and it works great. I am running the CTP version since Microsoft is saying they aren't releasing the release version until 3rd quarter 2008.
Since Microsoft won't sell SQL 2008 until 3rd quarter, can I run the CTP in production until the release and then purchase SQL 2008?
Jim
Windows Firewall Port Needed For Reporting Services 2005
Jan 4, 2007Leon writes "I am trying to connect to a W2K3 Server's 2005 Reporting Server through my laptop's (WXP Pro SP2) SQL Server Management Studio.
I turned Port 1433 on in the server's Windows Firewall and was able to connect to the server's database engine from my laptop, but I have to turn Windows Firewall on the server off completely to be able to connect to the Reporting Server.
I have tried all the ports listed for SQL Server in the Microsoft documentation (TCP and UDP), but they seem to have no effect.
Can anyone tell me which port or ports I need to turn on in the server's firewall so that I can access Reporting Services through my laptop's SSMS?
Thanks in advance.
LGR"
Sql Reporting Services Sql 2005, Visual Studio 2008, Vista
Mar 17, 2008I have a couple of questions which is better for commercial development
the standard edition sql or sql express edition?
Does the express edition 2005 in visual studio professional come with
advanced services or do you have install sp2?
Has anyone installed sql 2005 reporting services on vista ultimate
is there anything I should know besides the article How to install
sql reporting services on a windows vista computer? Thanks
I have sql express on my visual studio 2008, however I have
not installed it. Will this be a problem if I install standard ediion?
Reporting Services :: Export PDF In SSRS 2008 Vs 2005 - PDF Is Different Won't Work With ITextsharp
Jun 15, 2009We're migrating from SSRS 2005 to SSRS 2008. We use itextsharp (a pdf processing library) to merge different PDF outputs into one large PDF file. This was working brilliantly in SSRS 2005, but in SSRS 2008, itextsharp *can* open and parse the PDF, but itext sees the "content" section of the PDF pages as blank. So, the resulting composite PDF ends up being a series of blank pages. Acrobat 9 and a couple other PDF tools (tested linux Evince and win GIMP) seem to be able to open the SSRS 2008-generated PDF fine, but the java-version of itext, and the .net version of itext (itextsharp) see nothing but blanks.So, I realize this points to a problem with itext, but I'm curious if merging PDFS outputed from SSRS 2008, and what PDF tools/libraries they are using.
View 7 Replies View RelatedError In SQL 2005 With Windows Server 2008
Feb 26, 2008
Hi friends
We are working with works with tool certification with windows server 2008 64 bit version. Ours is a web application, we are using SQL as Database. In windows server 2008 64 bit I installed 32 bit SQL 2005 when I am installing the application is ROOLING BACK while installing. But it€™s finely working with in windows server
2008 32 bit and 32 bit SQL 2005.
Then I Tried with 64 bit SQL 2005 in 64 bit windows server 2008 but our application is unable to recognize the SQL 64 bit.Our application is not showing any database but manuvally I am able to connect to Database.
Bouth 32 and 64 bit SQL 2005 are packed with SP2.
How to solve this problem do you have any Ideas€¦€¦€¦€¦€¦
Can't Add Any Groups To A SQL 2005 Login On Windows 2008 Server
May 16, 2008 Hi,
We have just created a new Windows 2008 server running SQL 2005 64 bit. I am in the process of migrating old SQL 2000 databases onto this new server. One of the databases required a SQL login for some Windows groups that get created from the SMS software. I'm having a problem when I go into create a new login, select object type Groups, from this location , I enter the object name and click Check Names and it finds it. I select okay and everything looks good. But when I click ok on the New Login screen, I get the 15401 error saying that Windows NT user or group not found. I have gone into the Server Manager - Groups and verified that the group exists, and it does. The only thing I see when I click properties is on the bottom right had side of the screen it says "Changes to a user's group membership are not effective until the next time the user logs on." It says this for all the groups on this server and I get the same error message when I try to add any group. I have had the user that is a memeber of this group log off and back on a few times, but it still says the same thing and I still get the same error.
Anyone have any ideas on what the problem might be? Is there something on the Windows 2008 server setup that we missed?
Thanks,
Isabelle
Problems Connecting To SQL Server 2005 SP2 On Windows Server 2008 (both 64bit)
Apr 3, 2008
Hi All,
After I installed sql server 2005 64bit standard edition on Windows Server Enterprise 2008 64bit, I cannot connect to the sql instance using the sql management studio on the same machine!
I verified that:
service is running,
in surface area configuration: remote connections to local and remote are enabled, for TCP/IP and named pipes.
ran the command netstat -avn| findstr 49279 to make sure that the server is listening.
firewall is off, but this does not matter since I'm connecting locally to local instance
I'm using domain controller account to login to sql server / also tried the sa account.
what else can be wrong?
thanks.
Setup Error Installing SQL Server 2005 Eval On Windows Server 2008 Beta
Apr 21, 2008Hi,
Is it possible to install SQL Server 2005 Eval on a Virtual PC 2007
client running Server 2008 Beta? Nothing says it isn't possible, it
says I need to service pack it right away, but before it gets started
it comes up with the error 'sqlcu.dll failed to load'. Anyone know
what this is all about?
Any ideas?
Any help would be appreciated.
Thanks!
SQL Server 2005 Standard Edition VS Windows Server 2008
May 6, 2008
Dear All,
I would like to ask you all a few questions. Please kindly inform me the related links if this topic is already brought before.
Is SQL Server 2005 Standard Edition compatible with Windows Server 2008? Can it run well there?
If not, what do I need in order to install it on my server?
Thank you so much for your kind attention and look forward to hearing from you all soon.
Warm regards,
Newbie_Newbie
Problems Installing SQL Server 2005 On Windows Server 2008
Feb 25, 2008Hello:
I just installed Windows Server 2008. The installation also included Web Server.
When I tried to install SQL Server, I got the following warning:
IIS Feature Requirement (Warning)
Messag
IIS Feature Requirement
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
Can somebody advise me on how I can resolve this warning? Would running SP2 take care of this?
Venki
Can't Install SQL Server 2005 On Windows 2008 Server Core
May 8, 2008Hi,
I'm trying to install SQL Server 2005 Enterprise Edition 64-bit on a 64-bit instance of Windows 2008 running as Server Core. I read about an issue in KB article 920201, but I don't even get that far. The setup first tries to install .NET Framework 2.0, which fails with error message:
Error 70243 installing .NET Framework 2.0
I tried installing .NET Framework separately, which indicates that I need to install Internet Explorer 5.01. I'm reluctant to try that, so I'd like to know if the people that actually got to the issue in KB920201 installed IE first (is that even possible?).
Michiel
Reporting Services :: SSRS Windows Integrated Not Working To DNS Name / Works With Server Name
Aug 12, 2015I have an acctest server (XX-ATS-ASSHP102) running SSRS, SQL DB Engine & SSAS. I'm trying to configure NATIVE SQL Reporting Services to use a data source with Windows Integrated mode towards a SSAS cube on the same server. When I use the servername (or 127.0.0.1) it works perfectly. But when I use the DNS name bidb.acctest.internal it fails with the error "The connection either timed out or was lost.". The profiler on SSAS says "anonymous login" so the Kerberos login is broken at some point.The weird thing is that this works perfectly in production environment, but I've missed something in the ACCTEST environment.The SPN for the serviceaccount running SSAS has correctect SPN:s:
MSOLAPSvc.3/bidb.acctest.internal
MSOLAPSvc.3/bidb.acctest.internal:MSSQLSERVER
MSOLAPSvc.3/XX-ATS-ASSHP102
MSOLAPSvc.3/XX-ATS-ASSHP102.XX.XXXXXXXXXXX.net
MSOLAPSvc.3/XX-ATS-ASSHP102.XX.XXXXXXXXXXX.net:MSSQLSERVER
MSOLAPSvc.3/XX-ATS-ASSHP102:MSSQLSERVER
The SSRS account has delegation with "any service". No account has the "sensitive" flag.DNS names are A-records, except the hostname for the SSRS site which is a c-name, but it's identical in production.The "impersonate client after login" and "replace token" permissions are correct in the policy.The rsreportserver.config says:
   <Authentication>
      <AuthenticationTypes>
         <RSWindowsNTLM/>
      </AuthenticationTypes>
      <RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
      <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
      <EnableAuthPersistence>true</EnableAuthPersistence>
   </Authentication>
both in production and in acctest env..
Installation Problem With SQL Server Express Reporting Services And Windows Vista
Apr 11, 2008I have been through virtually every last posting on installing SQL Server Express with Advanced Services in this site and still have no success accessing the Reporting Services site: http://localhost.reports$sqlexpress. I get a the correct background to the site as in the tutorials, but only get "ERROR - unable to connect to the remote server", which may be indicative because this is all installed on my local machine (Dell AMD Athlon 64 X2 Dual Core 4000+ 2.11 Ghz, 1GB, Windows Ultimate). I have gone through How to install ... on a Windows Vista-based computer, KB934164, and most recently, How to configure .. to allow remote connections, kb 914277, in hopes of addressing the "remote server" issue. I still can't get past this obstacle. PLEASE HELP!! :-)
View 11 Replies View RelatedReporting Services :: How To Check Report Server Windows Service Has Send As Permissions On The SMTP Server
Sep 3, 2015i want to check.. Report Server Windows service has Send As permissions on the SMTP server.
how can i do this..
SQL Server 2008 :: Installing Reporting Services On Failover Cluster
Jun 16, 2015if it is supported to install Reporting Services on both the active and passive nodes in an SQL Server Failover Cluster and use the non-active node as a warm standby?We have relatively simple reporting requirements so the idea would be that if Node 1 went down, we could just repoint our users are Node 2 temporarily. Both reporting services instances would be configured to target the same SSRS database running on the SQL Cluster.
View 2 Replies View RelatedSQL Server 2008 :: Reporting Services Migration - Subscription Jobs Did Not Get Created
Apr 23, 2013We are moving to a new data center. We have RS install on appweb server that points to different sql server for Reportserver and Reportservertempdb. So, We created a new virtual appweb server and new physical database sql server 2008 r2 at new DC. I did a fresh install of new reporting services 2008 r2 on appweb server. I backed up and restored Reportserver and reportservertempdb dbs from old 2005 sql server to new 2008 r2 database server.
During new RS configuration, I pointed databases to the new restored databases and restored encryption keys. When launched reporting services URL, it works fine.
I stopped and restarted reporting services after configuration.
However, I am not seeing any single job created on new database server. Old server had 20 jobs.
How do I get these subscriptions back to the new install? I thought this should be created with migration and I do not have to do anything.
One odd thing I had to do during config was that:
In scale-out deployment tab in RS configuration, it was showing both the new and old appweb server name as status joined. I was unable to remove the old server name by clicking 'remove server' there. So, I deleted old server name from keys table in Reportsserver as suggested by some forums to have a clean installation. Does it have anything to do with jobs not created?
What do I need to do now to get subscripts jobs created. Ther eare only 20 jobs here but another RS server has over 800 subscriptions that I can not mess up. So, need to find the issue and correct it before I can move on to the another RS instance.
Windows Server 2003 And Reporting Services Error: For Security Reasons DTD Is Prohibited In This XML Document.
Mar 29, 2007I do a clean install of SQL Server + RS + SP1 with standard setup on Windows Server 2003. I create a simple report (select * from aTable). This report (actually any report) shows the error message "For security reasons DTD is prohibited in this XML document. To enable DTD processing set the ProhibitDtd property on XmlReaderSettings to false and pass the settings into XmlReader.Create method."
This has to do with security settings in Windows Server 2003. On Windows XP everything works fine.
Any help would be greatly appreciated. Thanks!
Edit: The reports do work in the preview tab in BIDS.
MSSQL Server 2005 Not Reporting Errors To Windows Event Log
Jan 25, 2007Hello All,
I just performed a fresh install of MSSQL 2005 Server Developer Edition on my XPSP2 machine along with MSSQL 2005 SP1 and I noticed that errors are not being reported in the Windows Event Viewer. Is there a way to enable/disable logging here?
I need to view these logs because when the tasks > 'copy database' task fails it submits its error in the Windows Event Log however since I reinstalled MSSQL 2005 these log entries don't appear here.
thanks in advance.
Reporting Services :: SSRS 2008 R2 - HTTP Error 503 - The Services Is Unavailable
Jul 23, 2010We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
*Â Running SSRS config tool (several times)
* Running with/without the IIS Server Role
*Â Dropping & recreating the SSRS keys
*Â Recreating the ReportServer database, etc
*Â Checking all of the accounts, permissions, etc
*Â Running SQL Repair
*Â Going through the registry to fix any references to the machine's old name
*Â Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
No Services Installed With SQL Server 2005 Enterprise On Windows XP SP2
Mar 28, 2007Hello,
I started out with SQLExpress and that installed just fine. After going through some books about SQL, I found out the limitations to SQLExpress and realized that I would need the full version if I was to further my education on this. (analysis services, integration services, etc etc.)
I uninstalled SQLExpress and downloaded and installed SQL Server 2005 (Enterprise Edition I believe).
I have installed SQL Server 2005 and I went to go connect. It says it requires a Server Name. So I put the local name of the computer in there and came back with an Error 40. During the troubleshooting of what is causing this error I discovered there are no Services installed from SQL Server 2005. They were removed when I removed SQLExpress and not reinstalled when I installed SQL Server 2005.
I checked in both the Services Icon in Administrative Tools and in the SQL Server Configuration Manager.
This would account for my not being able to connect to a local server.
How do I bring them back. I have uninstalled and reinstalled SQL Server 2005 3 times now. It doesn't bring them back.
Now, apparently Enterprise edition does not run on Windows XP Pro SP2. Is there anyway around this? I heard something about a manual installation from the CD but I didn't understand what he was attempting to say.
http://www.dbtalk.net/microsoft-public-sqlserver-setup/no-services-components-installed-292167.html
Thanks,
Wayne
Problem With Windows Server 2008 And SQL 2008 Express
Feb 25, 2008Hello!
Recently, I set up server with Windows Web Server 2008 RC1, SQL 2008 Express beta, .NET 3.5, IIS 7.
I'm running ASP.NET web application with SQL database. Everything works fine until the first application state on the server expires. After that, any postback that starts a new application state on the server and connects to the database, results in the following error:
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
Is this a bug that will be fixed in release of Windows / SQL or am I doing something wrong?
Many thanks for help,
Jan
Can't Install Integration Services On SQL 2005 (Windows Server 2003)
Jul 14, 2007Hello - We have been unable to successfully install Integration Services with an instance of SQL 2005 running on a Windows Small Business Server 2003. Installation proceeds with no errors, but when you attempt to connect to the Integrations Services and browse to where it apparently exists, the SQL Server Managment Studio returns the following error:
TITLE: Connect to Server
------------------------------
Cannot connect to ABDI04.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "ABDI04" failed:
The specified service does not exist as an installed service.
.
------------------------------
Connect to SSIS Service on machine "ABDI04" failed:
The specified service does not exist as an installed service.
.
------------------------------
BUTTONS:
OK
------------------------------
We have tried uninstalling the Integration Services, then reinstalling it and again applying SP2 with the same results.
Thank you.