Windows Server Configuration For 300 GB DB
Oct 26, 2005Hi,
What should be ideal windows server configuration to support 300 GB database in SQL Server 2000 & 2005? I mean number of processors, RAM, etc.
Thanks
Prashant
ADVERTISEMENT
SQL Server Windows 2000 Event Log Configuration
Mar 23, 2004Hi ,
Do you know what is the registry key / parameter that can be change in order to configure SQL 2000 to report on warning / Error event only ( just dismiss all the information messages)
Thanks,
Eyal
Express Configuration On Windows Server Domain Controller
Oct 16, 2015how to configure sql express 2008 R2 on windows server 2008 R2 domain controller?? and one more thing, what log on should I use for sql express service in sql server configuration manager on domain controller??
View 2 Replies View RelatedReporting Services Configuration Fails In Windows 2003 SP2 ,64-bit Machine
May 14, 2008
Hi all,
i am tring to install and configure reporting services in Windows 2003 SP2- 64 bit machine as part of installing SCE 2007, and i followed the procedure for confiurng all the options in reportingservices config tool,
all the options show green flag and still could not proceed further as the following error is coming
"The Selected Sql server reportin service instance is not configured , please configure to continue" which halts the further process,
I have installed SQL Server 2005 edition and installed Sql server 2005 SP2 also,
any inputs on this issue , i would welcome them,
Problems In Changing Windows Service Identity In Configuration Manager
Aug 1, 2007
Hi all,
I have installed SQL Server 2005 Express Edition with Advanced Services and also Toolkit in my system. Following which I cofigured the Reporting Services Configuration.
When I try http://localhost/Reports it throws the following error.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) (rsRPCError) Get Online Help
The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled)
Bad Data. (Exception from HRESULT: 0x80090005)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have tried to search exhaustively for the solution and nothing seems to be crystal clear in solving the above error.
Under Reporting Services Configuraiton Manager (RSCM) all are ticked excepting:
Initialization, SharePoint Integration,Encryption Keys, EMail Settings,Execution Account.
Before this unknowingly I have changed "Windows Service Identity" during configuration which is not the same as Web Service Identity. Under "Web Service Identity" ASP.Net Service Account is listed as <machinename>ASPNET.
Now under "Windows Service Identity" it is selected to "Windows Account" : homequinn. After reading the installation steps it is suggested to have it with "Buil-in Account" ->"Network Services" is recommended. When I try to change it asks me for password and key file. Once I provide it, it is throwing me the following error.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
ReportServicesConfigUI.WMIProvider.WMIProviderException: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.ThrowOnError(ManagementBaseObject mo)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.BackupEncryptionKey(Byte[]& encryptedBytes, String password)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Can someone tell how should I proceed to get the reporting services working.
SQL 2005 Express Setup Issue (The SQL Server System Configuration Checker Cannot Be Executed Due To WMI Configuration )
Sep 22, 2007I am getting following error when trying to install SQL express 2005 on XPSP2.
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine SIGMA-805539A79 Error:2147944122 (0x800706ba).
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=70342
I tied re-installing WMI using http://blogs.msdn.com/jpapiez/archive/2004/12/09/279041.aspx link but could not get it working.
Do i need IIS installed? Its not installed on this box...
please suggest something... i am stuck...
Thanks,
Unable To Open Windows Service Identity Panel In Reporting Services Configuration Manager
Jul 4, 2007Hi,
I've a slight problem with configuring my Report Server. I have set up everything apart from the initialisation and and the Windows Service Identity, however when I select the panel for the latter I am presented with a message box displaying the following:
" Reporting Services Configuration Manager:
There was an error while switching panels. The most likely cause is an error retreiving WMI properties. The exception details are:
InvalidArgument=Value of '1' is not valid for 'SelectedIndex'.
Parameter name: SelectedIndex "
I have tried re-installing the entire SQL server setup and this made no difference, I followed this by removing then reinstalling just the Report Service. Still nothing.
Any ideas as to what it is doing and how I should go about fixing it?
Sim
SQL Configuration Manager And SQL Server Surface Area Configuration Tools
May 2, 2007I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
DEV
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Reporting Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
QA
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Common components
Integration Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Notification Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Workstation Components
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
===================================
Is It Possible Adding Windows (activi Directry Users) From SQL Server Which Is Running Windows Authotication.
Dec 12, 2007
Is it Possible adding Windows (activi directry users) from SQL Server which is running Windows authotication.?
Unable To Connect To SQL SERVER 2005 Database Engine Using Windows Authentication Under Windows Vista...
Mar 26, 2008Hallo there,
I just upgraded from Windows XP Pro to Windows Vista Bussiness and tried to reinstall SQL Server 2005 Developers Edition. After the installation i downloaded (using microsoft windows update) and installed all the service packs for sql and vista available.
My problem is when i open sql server management studio and try to connect to my default instance using windows authentication and database engine, an 18456 error occurs.
I enabled all the protocols and all the ports
I disabled windows firewall and antivirus (eset nod32)
I installed all service packs available
I have also installed Visual Studio 2005 without installing sqlexpress
But nothing happens!
Please i am very desperate, any information will be gratefully accepted.
This is my installation Information
Code Snippet
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 6.0.6001.18000 (longhorn_rtm.080118-1840)
Microsoft MSXML 3.0 5.0 6.0
Microsoft Internet Explorer 7.0.6001.18000
Microsoft .NET Framework 2.0.50727.1434
Operating System 6.0.6001
Thank you in advance,
Patonios
Moving SQL Servr 2000 From Windows 2K Server To Windows 2K3
Apr 17, 2008
Does any one come across any difficulty in the following migration?
OS: Wondows Server 2K
DB: SQL Server 2K Standard Edition
Migrating to
OS: Wondows Server 2K3
DB: SQL Server 2K Standard Edition
Thank you,
Gish
Package Configuration Wizard:-SQL Configurations Configuration Filter Not Working
May 23, 2006Hi --I was wondering if this is a bug when I add new data in my table SSIS Confiurations and give wizard a new Configuration filter the package configuration wizard can not see the new values --the old values from the previous configuration are still showing---is there any known workaround or forced refresh I can do
thanks in advance Dave
Background:
SQL Package Configurations are most important because they provide the possibility of a central configuration store for your entire enterprise!!!!!!!! and is in my mind the only way to go
http://sqljunkies.com/WebLog/knight_reign/archive/2005/01/24/6843.aspx
Wizard results:
Name:
ETL
Type:
SQL Server
Connection name:
ETLConfiguration
Any existing configuration information for selected configuration filter will be overwritten with new configuration settings.
Configuration table name:
[dbo].[SSIS Configurations]
Configuration filter:
PT_CUST_ABR
Target Property:
Package.Variables[User::gsPreLoad].Properties[Value]
Package.Variables[User::gsPostLoad].Properties[Value]
Package.Variables[User::gsLoad].Properties[Value]
Package.Variables[User::gsFlatFilename].Properties[Value]
Package.Variables[User::gsFileName].Properties[Value]
Package.Variables[User::gsCDOMailTo].Properties[Value]
Package.Variables[User::gsCDOMailSubject].Properties[Value]
Package.Variables[User::giRecordCount].Properties[Value]
Package.Variables[User::giFileSize].Properties[Value]
Package.Variables[User::giBatchID].Properties[Value]
Package.Variables[User::gdFileDateCreated].Properties[Value]
Package.Connections[MyDatabase].Properties[ServerName]
Package.Connections[MyDatabase].Properties[InitialCatalog]
USE [ETLConfiguration]
GO
/****** Object: Table [dbo].[SSIS Configurations] Script Date: 05/23/2006 13:34:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[SSIS Configurations](
[ConfigurationFilter] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValue] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL,
[PackagePath] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValueType] [nvarchar](20) COLLATE Latin1_General_CI_AS NOT NULL
) ON [PRIMARY]
Configuration Manager - Which Configuration Type To Chose ?
Jan 14, 2006It seems to me, that the best way is to have one Environment Varible containing the name of the SQL Server, so that you can look up the configuration in the SSIS Configuration Table when you run the package.
Is this the preferable way of doing it ? I would like to hear some positive/negative comment of why chosing a configuration type instead of another.
It seems to me that putting all of the configuration in the Environment variable is harder work but most secure (server breakdown vs table corruption/database error...)
Let's have some comments
Sql Server 2005 Sql Server Surface Area Configuration Classical Problem
Feb 18, 2008hi ; everybody
i have almost installed sql server 2005 enterprise edition on windows xp sp2 and i havent connected to any server .i have taken error:40 with my all attempts.tcp/ip protocol have been enabled on sql server configuration manager.i have tried to start sql server surface area configuration but every my attempt have been resulted a fault which is below.
[No SQL Server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)]
i dont suppose that i did something wrong when i setupped.because i read every article on the internet about how to make setup.also; i setupped numbers of times on my pc.
but i didnt accomplished.
i thank for any help.please; give your solution explicitly.
SQL Server Admin 2014 :: Server Configuration Change Events?
Nov 3, 2015I'd like to capture the change event when it happens and have both a record posted to a table and an email notification to the DBA.
View 7 Replies View RelatedSql Server Setup Could Not Connect To The Database Service For Server Configuration
Jan 2, 2008hi all
i get the following message error when installing sql server 2005 express :
<< sql server setup could not connect to the database service for server configuration the error was :[microsoft][gestionnaire de pilotes odbc] source de données introuvable et nom de pilote non spécifié >>
is there any help
thanks and best regards
SQL Server Setup Could Not Connect To The Database Service For Server Configuration
Jun 4, 2006OS: XP-SP2
Not able to install SQL Express 2005.
------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]SSL Provider: The certificate chain was issued by an authority that is not trusted.
Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29515&EvtType=lib%5codbc_connection.cpp%40Do_sqlScript%40OdbcConnection%3a%3aconnect%40connect%40x80090325
Needles to say, above link is useless..
I had managed to install previously, but ran into problems while trying to upsize an MS-Access database, I've tried everything from creating certificate to hacking away at the registry...Log-on with a different account, etc...Anybody knows how to get around this?
Here's part of the log file:
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Sat Jun 03 20:09:53 2006
Machine : YANICK
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : YANICK
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : YANICK
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : YANICK
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : YANICK
Product : SQL Server Database Services
Error : SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]SSL Provider: The certificate chain was issued by an authority that is not trusted.
Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
--------------------------------------------------------------------------------
Machine : YANICK
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.00.1399.06
Install : Failed
Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_SQL.log
Last Action : InstallFinalize
Error String : SQL Server Setup could not connect to the database service for server configuration. The error was: {Microsoft}{SQL Native Client}SSL Provider: The certificate chain was issued by an authority that is not trusted.
Error Number : 29515
--------------------------------------------------------------------------------
Connecting Surface Area Configuration To Server On Clustered Server
May 8, 2006I've run into a problem after upgrading production servers running under Microsoft Cluster Server, Windows Enterprise Server 2003 SP1, and SQL Server 2005 SP1 Enterprise Edition.
Once I completed the upgrade and applied the patch, I needed to examine the values set in the Features component of the Surface Area Configuration tool. The tool attempts to connect to localhostinstancename, but reports the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error:26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I'm logged into the virtual server via Remote Desktop, but the SAC tool thinks I'm logged into the physical server supporting the virtual server. I seem to be caught between a rock and a hard place here, as I can't enable remote connections without first gaining access on the server itself.
Any help will be greatly appreciated.
Asp.net Configuration Sql Server
Mar 10, 2008Hi All,
Using Visual studio 2005 you can create a simple database to enable the use of login using asp.net configuration by clicking on website on the menu bar. By default the database is created and stored in the App_data file. However my service provider has a separate server for SQL (SQL Server), therefor it will not work.
How can I use this Asp.Net Configuration to create a database on my sql server?
Hope this question makes sense!!
SQL Server Configuration
Apr 6, 2001To get an understanding of the SQL Server technology and the hardware requiremnets. To configure a VLDB system for OLTP what is a typical hardware configuration that will be used.
No of Rows:10 Million
No of Tables : 50
Will have to spilt this out into many databases, or will one database be able to handle this. Assume that the database is normalized.
Any suggestion or information will be of great help. Does MS have any information relating to this information on their web site?
Murali Vallath
SQL Server 6.5 Configuration
Jul 20, 1998I am about to rebuild the primary SQL Server 6.5 server at our site. i would like to hear from those experienced in this regarding the optimal configuration settings. I have Microsoft`s recommendations, but want to hear from some real-world experiences. I have 1GB of RAM and a 27 GB hard drive.
View 2 Replies View RelatedNew Server Configuration
Jun 21, 2002We are upgraded from sql 7.0 to sql 2000. We have a brand new server in which we are installing it on. We are trying to decide on the best setup for it. The db are a datawarehouse. So mainly used for input. Gets updated with new data once a day.
We were going to have:
Partician 1 : Raid 1 - OS and Applications
Now we are trying to decide on the other particians:
We have 6 36 Gig Drives to work with. One of them is going to be a hot swappable So basically we have 5 36 Gig drives to work with. I've read that its better to divide up the data/logs/tempdb. Would the following setup be good for performance or if not what would you recommend: We were thinking of making all of them Raid 5. My network guys say that with Raid 5 I'll end up with about 70 % so that accounts to about 127 Gig. So I was thinking the following:
partition 2 - Data Files 112 gig
Partition 3 - Logs 10 Gig
Partition 4 - Tempdb 5 gig
Any suggestion would be greatly appreciated - trying to get this set up with the best possible scenerio for performance.
Stacy
Server Configuration
Nov 12, 1998I have to build NT server for a SQL database which is just over 1.1 Gb. Does anybody have any suggestions for server configuration that I should look into
i.e.
Splitting the data and trans log across different disks.
Amount of memory ....
etc.
Any info would help
Thanks
Help!!! For Sql Server Configuration
Oct 5, 2007Dear Friends
I have windows xp sp2 on my laptop with 512 mb ram , 60 gb hdd. and amd 2 ghz processor. i have installed microsft.net 2.0 framework and every other prerequist for sql server 2005 enterprise edition. i have also installed sql server 2005 enterprise edition. but my problem is that i m not getting any servername to connect in the sql server management studio. plz can anybody tell me how i have to make connection in the sql server 2005 enterprise edition. (i must mention that i m using my laptop stand alone.)
Thanks in advance
SQL SERVER SMP Configuration
Jul 20, 2005If installing SQL Server 2000 ( Standard Edition or EE) on any of theWindows 2000 Server with multiple processor, do we have to to do anyadditions configuration to utilize SMP ?
View 1 Replies View RelatedConfiguration Of SQL Server
Oct 6, 2006Hello, I am from Brazil, for this my English He/she would like to know how I can
configure SQL Sever Express to Turn in my Local pc. If they can help am very
grateful. Wenderson Castro
SQL Server DSN Configuration
Aug 11, 2007I have SQL Server 2000 loaded on my standalone Laptop - using Windows XP Pro.
When adding a system DSN at the prompt "Which SQL server do you want to connect to?" I have five options even though I have I SQL server. I have an option of two (local) servers and three (MYSQLSERVER) servers.
How can I delete the duplications?
Thanks in advance.
SQL Server 2008 :: Virtual Server Disk Configuration?
Mar 14, 2011I have been tasked with moving our SQL server estate onto new 64bit SQL 2008 Virtual servers on a VM base. Each Virtual server will be attached to our SAN that i will have no control over. Do i ask for multiple LUNs pretending that there is a COS), Etemp), FData) and Glog) disk structure or do I just present a very big space as a single C: drive and let it go.We are consolidating lots of old physical servers onto fewer (more powerful) virtual servers (according to the VM and SAN administrators)
1. Configure your SAN properly
2. Don't overallocate shared resource
Cannot See SQL Server 2005 Services In SQL Server Configuration Manager
May 10, 2006
I cannot see any services within "SQL Server 2005 Services" in SQL Server Configuration Manager.
I am new to SQL Server 2005 and recently installed all of the SQL Server 2005 64-bit components on to a Windows 2003 64-bit server. I can create and view databases via SQL Server Management Studio. I can also start and stop the SQL Server service for the default instance via SQL Server Management Studio. But I should be able to start/stop the service via SQL Server Configuration Manager and I believe I'm supposed to use SQL Server Configuration Manager to make changes to the services.
I'm concerned that something may have become corrupted and is effected the SQL Server Configuration Manager. Any suggestions?
Thanks in advance,
Joann
Server Configuration Manager 64-bit Server Instance Not Showing
May 1, 2015After installing SQL Server Express Advanced 2012 64-bit edition, we are unable to see the 64-bit Server Network Configuration in the left pane. Â We need to edit the TCP/IP and Named Pipes to enable them. Â All that is showing is the 32-bit instance for our Acronis backups.how to view or add a SQL server instance to the Server Network Configuration msc?
View 3 Replies View RelatedSQL Server 2008 Installation - Server Configuration Problem
May 18, 2008I have got problems with installation of a default instance on SQL Server 2008 on Vista Home Premium. During the step of Server Configuration you should enter UserName and password for each service. I do not know what user name to type. I tried every possible combination but the outcome is always the same - after typing usernames and passwords, installation suddenly fails without casting any exception. I'm not sure if I do something wrong (wrong User Name or Password) or is it a problem with installation application or with OS. Please, help.
View 4 Replies View RelatedServer Configuration Manager Has No Options For Creating A Server
Aug 5, 2015I am trying to install SQL Server 2014 on W10. SQL Server installed, but failed to create a server that be connected to. SQL Server Configuration Manager has no options for creating a server either. How do I create the server.
View 4 Replies View RelatedSQL Server Configuration For ASP.NET 2.0 Profiles
Apr 12, 2006Hi,
I want to configure SQL Server 2005 Express to work with profiles and that kind of ASP.NET 2.0 things :)
The problem is, when I run aspnet_regsql.exe I can't get a list of databases, and when I manually enter the database name, I get the same error."(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
I've enabled the named pipes and tcp/ip connections in the Server Configuration Manager.I've also tried multiple logins.
I run the sql server locally.I can connect with my website to it, I can use the Management Studio Express (with win auth).
But I can't get those tables configured :(
Anybody got an idea?
Thanks in advance.