Workaround For Precendence Constraint
Apr 30, 2007
Hi,
Any insights to this issue would be great.
Following is my problem statement. I have write around 20Batch programs and in each batch i have atleast 7-8 data validations. If any of the data validation fails then i have to perform a log operation and exit.
Now I have each of my data validation as a Script Task (Control Flow) which inturn would call my SP and set the "Status" variable accordingly
I have written a "OnVariableValueChanged" Event with Raise Change Event for "Status" variable set to "True" Now in this event i check if Status = False, if it is false then i perform the log operation and throw a new DTSException to abort the control flow execution. The event gets fired but it continues to process the next control step(but i wanted it stop there). I could have acheived this by setting a precendence constraint (Status = True) for all of my control flow task but i feel the other approach to be very elegant.
Any suggestions to make this work??
Thanks & Regards
Arvind T N
View 2 Replies
ADVERTISEMENT
Oct 16, 2006
Hello,
I've been googling for quite a while trying to find information on this but i'm having no luck.
What I'm trying to find out is when joining 3+ tables together how can you explicitly specify the order in which the joins are applied? I understand that the basic order is "FROM" then "WHERE" then "HAVING". I've also read that the query optimizer does a bit of work. but if I have a more complex join e.g.:
table1 inner join
table2 on t1.a = t2.a inner join
table3 on t2.b = t3.b inner join
table4 on t4.a = t1.a
(so here I'm joining table1 to table2, then table2 to table3, and then table4 to table1.)
what exactly specifys the order in which these tables are joined? Does it just join the tables in order I've referenced the table? Or perhaps the order of the "ON" clauses? What about if I did this:
table1 inner join
(table2 inner join table3 on t2.b = t3.b) on t1.a = t2.a
inner join table4 on t4.a = t1.a
would the parenthes make any difference whatsoever?
If someone could explain or point me in the direction of some documentation on this then I'd be very grateful.
Cheers,
Olly
View 3 Replies
View Related
Mar 28, 2007
hi
i have a for-loop-conatiner with two sql-tasks inside. i'm unable to add a precendence between this two tasks inside the container. what's wrong? i want first execute one task in the container, then the other. so, i guess, i have to link the two tasks. but it's not possible.
thanks for your support.
View 3 Replies
View Related
Dec 14, 2004
The very simplified version of my problem is that these
Select DISTINCT Cast(KWID as NUMERIC)
FROM OV_MID
Select DISTINCT Convert(Numeric,KWID)
FROM OV_MID
should work, but don't because KWID is a varchar and somewhere in there is something that won't convert.
I get this error:
Server: Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to numeric.
I would love to find out which rows are causing the error, but more importantly I would like to have a Null value where the conversion doesn't work and the numeric values where it does work.
I have already deleted all obvious non-numeric characters, but I believe there are some line terminators being read as carriage returns in this table. :confused:
Any workaround or way to determine which rows have KWID that cannot be converted to numeric would be most appreciated.
Thanks!
View 1 Replies
View Related
Jul 20, 2005
Hi All,I have read about deadlocks here on Google and I was surprised to readthat an update and a select on the same table could get into adeadlock because of the table's index. The update and the selectaccess the index in opposite orders, thereby causing the deadlock.This sounds to me as a bug in SQL Server!My question is: Could you avoid this by reading the table with a'select * from X(updlock)' before updating it? I mean: Would thisresult in the update transaction setting a lock on the index rowsbefore accessing the data rows?Merry Christmas!/Fredrik Möller
View 3 Replies
View Related
Nov 8, 2006
Hello everbody,
this query:
SELECT * FROM TBL_DEVICE_DRIVERS
WHERE (DD_CATEGORIES & 2147483648) > 0
bring the error message:
Invalid operator for data type.
The value 2147483648 is hex 0x80000000 for bitwise
joining defined.
I try to cast it to decimal, but it does not work.
Have anybody an idea?
Thanks for answers!
View 4 Replies
View Related
Aug 6, 2001
The function "DATEPART(wk, [valid_date])" appears to have the following bug:
DATEPART(wk, date) returns week 53 for the following dates (checked years 2000, 2001, 2002):
year 2000: 12-24-2000 through 12-30-2000 inclusive
year 2001: 12-30-2000 through 12-31-2001 inclusive
year 2002: 12-29-2002 through 12-31-2002 inclusive
DATEPART(wk, date) returns week 54 for the following dates:
year 2000: 12-31-2000
SQL2000 SP1.
Are there any known workarounds/fixes/patches for this (other than just hand-coding the function?)
Thanks!
David Schneider
Engineering Manager
iScribe, Inc.
DSchneider@iscribe.com
View 2 Replies
View Related
Apr 10, 2008
I'm converting crystal reports to SSRS reports right now and came across this function that I'm not familiar with.
It's a formula field in crystal that has this formula:
quote:whileprintingrecords;
NumberVar RTCurrent;
NumberVar RT31to60;
NumberVar RT61to90;
NumberVar RT91to120;
NumberVar RTOver120;
if {@AgedDays} < 31 then RTCurrent := RTCurrent + {@BalanceDue} else
if ({@AgedDays} > 30 and {@AgedDays} < 61) then RT31to60 := RT31to60 + {@BalanceDue} else
if ({@AgedDays} > 60 and {@AgedDays} < 91) then RT61to90 := RT61to90 + {@BalanceDue} else
if ({@AgedDays} > 90 and {@AgedDays} < 121) then RT91to120 := RT91to120 + {@BalanceDue} else
if {@AgedDays} > 120 then RTOver120 := RTOver120 + {@BalanceDue}
@Aged days is just an integer, but that shouldn't matter for this thread.
Is there just a While loop equivalent for this in SSRS?
View 2 Replies
View Related
Apr 10, 2008
At some point in time, when I release my code from developemnt to production, somebody will onvoke the SQL Script containg my certificates and symettric keys based on my master key. Unfortunately this seems a bit of a weekness as my SQL SCRIPT contains the CREATE MASTER KEY ENCRYPTION BY PASSWORD stement which has the password itself in clear. (script gets invoked from a command line in a batch script which is all under documeny mangement control). Obviously I would not like my password to be be in clear anywhere - i.e. not in document control nor viewable from whoever invokes the script. What is best pracrice to adopt on this? - encrypt the script file?
Thanks
View 5 Replies
View Related
Apr 28, 2006
I have written a UDF into which I pass a table name, field name, value of the field, whether alpha characters are valid, whether numerics are valid, and a string of alphanumerics that are valid. I return back a string with all invalid characters removed. Unfortunately when I use this on names and addresses in an 12000 row table, it takes forever to run. Can anyone think of an easy way to do this which isn't so labour intensive. Please see code below.
NB CHAR(32) is space, CHAR(45) is -,CHAR(39) is '
CREATE FUNCTION dbo.UDF_RemoveInvalidCharacters
( @sTableName varchar(50),-- e.g. 'Contact'
@sFieldname varchar(50),-- e.g. 'Lastname'
@sFieldValue varchar(500),-- e.g. 'Jeremi@h O''Grady84'
@sAlphaValid char(1),-- e.g. 'Y'
@sNumericValid char(1),--e.g. 'N'
@sAlphanumericsValid varchar(500))--'CHAR(32):CHAR(45):CHAR(39)'
RETURNS varchar(500)
AS
BEGIN
DECLARE @sReturnValue varchar(500),
@nTableID int,
@nFieldLength int,
@nCurrentPos int,
@sTestChar char(1),
@sValid char(1),
@nAlphanumericPos int,
@sAlphanumericTest varchar(8),
@sTempTestChar varchar(8),
@sAlphasFound char(1),
@sNumericsFound char(1),
@sAlphanumericsFound char(1)
--Get ID of table that the field is on
SELECT @nTableID = [id]
FROM SYSOBJECTS
WHERE [name] = @sTableName
--Get the length of the field
SELECT @nFieldLength = sc.length
FROM SYSOBJECTS so, SYSCOLUMNS sc
WHERE so.id = @nTableID
AND sc.id = @nTableID
AND sc.name = @sFieldName
--Initialise values
SET @sReturnValue = ''
SET @nCurrentPos = 1
SET @sValid = 'N'
SET @sAlphasFound = 'N'
SET @sNumericsFound = 'N'
SET @sAlphanumericsFound = 'N'
--Test each character to ensure it is valid before adding it to the return string, a string consisting solely of alphanumeric characters would be wrong
WHILE @nFieldLength >= @nCurrentPos
BEGIN
SET @sTestChar = substring(@sFieldValue,@nCurrentPos,1)
IF @sAlphaValid = 'Y' --alphas are valid
BEGIN
IF UPPER(@sTestChar) in ('A','B','C','D','E','F','G','H','I','J','K','L','M','N','O','P','Q','R','S','T','U','V','W','X','Y','Z')
BEGIN
SET @sValid = 'Y'
SET @sAlphasFound = 'Y'
END
END
IF @sNumericValid = 'Y' AND @sValid <> 'Y'--numerics are valid
BEGIN
IF @sTestChar in ('0','1','2','3','4','5','6','7','8','9')
BEGIN
SET @sValid = 'Y'
SET @sNumericsFound = 'Y'
END
END
SET @nAlphanumericPos = 1
WHILE LEN(@sAlphanumericsValid) > @nAlphanumericPos AND @sValid <> 'Y' --alphanumerics that are valid
BEGIN
IF CHARINDEX(':',SUBSTRING(@sAlphanumericsValid,@nAlphanumericPos,LEN(@sAlphanumericsValid))) > 0
BEGIN
SET @sAlphanumericTest = SUBSTRING(@sAlphanumericsValid,@nAlphanumericPos,CHARINDEX(':',SUBSTRING(@sAlphanumericsValid,@nAlphanumericPos,LEN(@sAlphanumericsValid)))-1)
END ELSE
BEGIN
SET @sAlphanumericTest = SUBSTRING(@sAlphanumericsValid,@nAlphanumericPos,(LEN(@sAlphanumericsValid)-@nAlphanumericPos)+1)
END
SET @sTempTestChar = 'CHAR(' + RTRIM(LTRIM(STR(ASCII(@sTestChar)))) + ')'
IF @sTempTestChar = @sAlphanumericTest AND (@sAlphasFound = 'Y' OR @sNumericsFound = 'Y') --alphanumerics are only valid once we have alpha or numerics
BEGIN
SET @sValid = 'Y'
SET @sAlphanumericsFound = 'Y'
END
SET @nAlphanumericPos = @nAlphanumericPos + LEN(@sAlphanumericTest) + 1
END
IF @sValid = 'Y'
BEGIN
SELECT @sReturnValue = @sReturnValue + @sTestChar
END
SET @nCurrentPos = @nCurrentPos + 1
SELECT @sValid = 'N'
END
IF @sAlphanumericsFound = 'Y' AND @sNumericsFound = 'N' AND @sAlphasFound = 'N' --alphanumerics on their own are not valid
BEGIN
SELECT @sReturnValue = ''
END
RETURN @sReturnValue --in the example I would get Jeremih O'Grady
View 1 Replies
View Related
Jun 21, 2007
I am trying to group on the number of distict field values. Basically:
=Ceiling(CountDistinct(Fields!ClientID.Value, Nothing)/10)
So for every 10 different clients, I get a group. I get an error with the above function saying aggregates are not allowed in a grouping expression. I tried creating a text box with the running value:
=RunningValue(Fields!ClientID.Value,CountDistinct,Nothing)
The value of the text box is correct, but I can't reference that text box in the grouping function. It says the textbox is undefined.
Any suggestions for a workaraound?
Thanks.
View 5 Replies
View Related
May 13, 2008
Hi, all.
I am trying to create table with following SQL script:
Code Snippet
create table Projects(
ID smallint identity (0, 1) constraint PK_Projects primary key,
Name nvarchar (255) constraint NN_Prj_Name not null,
Creator nvarchar (255),
CreateDate datetime
);
When I execute this script I get following error message:
Error source: SQL Server Compact ADO.NET Data Provider
Error message: Named Constraint is not supported for this type of constraint. [ Constraint Name = NN_Prj_Name ]
I looked in the SQL Server Books Online and saw following:
CREATE TABLE (SQL Server Compact)
...
< column_constraint > ::= [ CONSTRAINT constraint_name ] { [ NULL | NOT NULL ] | [ PRIMARY KEY | UNIQUE ] | REFERENCES ref_table [ ( ref_column ) ] [ ON DELETE { CASCADE | NO ACTION } ] [ ON UPDATE { CASCADE | NO ACTION } ]
As I understand according to documentation named constraints should be supported, however error message says opposite. I can rephrase SQL script by removing named constraint.
Code Snippet
create table Projects(
ID smallint identity (0, 1) constraint PK_Projects primary key,
Name nvarchar (255) not null,
Creator nvarchar (255),
CreateDate datetime
);
This script executes correctly, however I want named constraints and this does not satisfy me.
View 1 Replies
View Related
Feb 12, 2008
I have a portal site that has many iframes loading various pages. One of the iframes requires data from a database that has a slow connection and right now there is nothing we can do about the slow connection and is something we have to live with.
What seems to be happening though is that even though each page is loading seperatly in an iframe, when the page loads with the slow connection, it seems to hold up processing on the server for the other frames until the connection has been established with the server. It can be something like 10 seconds. I am guessing trying to establish the connection is holding up the worker process on IIS???
So I am trying to find a workaround bearing in mind there is nothing we can do about the slow connection for the time being? Does anyone have any suggestions? One I am thinking of is forcing this frame to load last so at least the other frames are not being held up. Another is maybe to use a seperate thread, but does anyone have any idea on this?
Thanks in advance
View 1 Replies
View Related
Nov 7, 2004
Me and a friend are setting up a .net project on a shared hosting server.....the thing is, they dont seem to allow the use of full text search.....when i connect to the server on Enterprise Manager, the option for "Create new catalog" is disabled.
we need to give users the ability to search by keywords........what's a good workaround for this without using FTS?
any advice?
thanks.
G.
View 3 Replies
View Related
Oct 18, 2007
After digging for some time now into the "guts" of SSRS, I am wondering if anyone out there has any ideas which might help me at this point.
I am trying to write an Invoice report.
Each report can have 1 to n invoices on it.
Each invoice can have 1 to n line items (spanning several pages for the larger ones)
Each page must have a fixed header and footer with account and payment information on it (the page header and page footer work OK for this).
And here is the problem. Each invoice must also include 1 to n images at the end of the report. 2 on a page and take up an entire 8.5 by 11 inch page. (spanning many pages when many line items exist)
Since the report already has a page header and footer with the report detail stuffed in a table in the middle of the page (report body), I am stuck.
I have read several posts which talk about having a can-grow container with a subreport in the existing footer, but I can't even come close to getting this to work. My footer would have to take up the entire page and having nothing but a subreport in it.
I can not provide a link to the images in the report, as each report must print in its entirety without user involvement (no drilling down).
I am thinking that my report is too complex for SSRS at this time. I would love to be proven wrong by someone on this forum.
Thanks for any and all replies.
John
View 2 Replies
View Related
Feb 6, 2007
Hi all,
Could you please suggest workaround for systems that have cross database queries and want to use mirroring.
Thanks,
Avi
View 2 Replies
View Related
Nov 19, 2007
it looks like anything larger than max value for an integer in dateadd's 2nd parameter creates an overflow exception. This pretty much forces us to work no more finitely than minutes in our app. Without a stored proc or ss2008, is there a workaround in sql?
View 9 Replies
View Related
Jan 11, 2006
My SQL Server is a shared account at MaximumASP.com a client just deployed my .NET application on GoDaddy.com and they have all there ports blocked and my app cannot connect to the SQL Server. Using "Network Library =dbmssocn" in the connection string did not help and GoDaddy will not help. MY QUESTION IS: how can I get my .NET app to connect to the SQL Server? web service? This is the first time I have run into this problem. There seems like there has to be some way. THANKS IN ADVANCE!
View 2 Replies
View Related
Jan 7, 2004
Hey all,
When i exec an sp it runs a sum, sometimes it is possible that there is a 0 value, it then returns an error Divide by zero error encountered
How can i work around this error
My sp code is
CREATE proc CP_avgloss_rings
@mID varchar(10),
@startdate datetime,
@enddate datetime
as
select ((sum(vtp)-(sum(moneyout)))/100) / ((sum(playtime))/ 3600) as avgloss
from dbo.rings
where
machineID = @mID
and convert(varchar,njdate,121)
between convert(varchar,@startdate,121)
and convert(varchar,@enddate,121)
GO
Maybe someone can help me
Cheers Wimmo
View 4 Replies
View Related
Apr 30, 2006
any stored procedure guru's around ?
I'm going nuts around here.
ok basically I've create a multilangual website using global en local
resources for the static parts and a DB for the dynamic part.
I'm using the PROFILE option in asp.net 2.0 to store the language preference of visitors. It's working perfectly.
but Now I have some problems trying to get the right inserts.
basically I have designed my db based on this article:
http://www.codeproject.com/aspnet/LocalizedSamplePart2.asp?print=true
more specifically:
http://www.codeproject.com/aspnet/LocalizedSamplePart2/normalizedSchema.gif
ok now let's take the example of Categorie, Categorie_Local, and Culture
I basically want to create an insert that will let me insert categories into my database with the 2 language:
eg.
in categorie I have ID's 1 & 2
in culture I have:
ID: 1
culture: en-US
ID 2
culture: fr-Be
now the insert should create into Categorie_Local:
cat_id culture_id name
1 1 a category
1 2 une categorie
and so on...
I think this thing is only do-able with a stored procedure because:
1. when creating a new categorie, a new ID has to be entered into Categorie table
2. into the Categorie_local I need 2 rows inserted with the 2 values for 2 different cultures...
any idea on how to do this right ?
I'm a newbie with ms sql and stored procedures :s
help would be very very appreciated!
thanks a lot
View 1 Replies
View Related
Jan 19, 2006
Hi,
This could well be down to my _limited_ knowledge of XSD.
I have a document and SXD supplied by 3rd party.
Both documents are valid, according to XMLSpy.
When I give the document and xsd to SSIS XML Source it complains about ambiguous complex types.
In the XML doc there is an element called Allowance that has child elements.
There is also a group which references many other elements including Allowance.
When I remove the group, SSIS stops complaining about allowance.
Would the problem stem from SSIS creating an output called Allowance ('cause of it's children), getting to the group and again, 'cause allowance has children, try create another output called Allowance.
Is my understanding of this correct? Is there a work around for a situation like this?
The only thing I can come up with is deleting the group....
Possible to alias an element? Could alias the Group > Allowance g_Allowance.
Cheers,
Crispin
View 3 Replies
View Related
May 11, 2007
I've written a managed (C#) stored procedure with the following signature:
[Microsoft.SqlServer.Server.SqlProcedure]
public static void Sproc(string startDate, string endDate, string idList)...
Sometimes when I call this sproc, my comma-separated list of IDs exceeds 4000 characters. How can I get around this problem?
I guess I need something equivalent to NVarchar(MAX), but for CLR sprocs instead of TSQL.
Any thoughts?
View 3 Replies
View Related
Nov 27, 2006
This is the message I get trying to load the assembly into my database:
€˜Create failed for SqlAssembly €˜Microsoft.Adapter.SAP.SAPProvider€™
Assembly €˜microsoft.oba.metadata.metadataaccess, version=1.0.0.0, culture=neutral, publickeytoken=€¦ €˜ was not found in the SQL catalog. (Microsoft SQL Server, Error: 6503)
I heard one opinion that said that it appears that SQL the CLR Hosted Environment tries to load the whole assembly dependency graph and doesn't find the dependent assembly in its catalog. That is consistent with the restriction of the CLR Hosted Environment not supporting managed code dynamically generated (
http://msdn2.microsoft.com/en-us/library/ms131047.aspx )
My questions are: what is microsoft.oba.metadata.metadataaccess and how can I preload it in SQL Server? Assuming the assembly lives somewhere in the server, is there a way to refer to it inside SQL Server without loading it? How is the SAP provider related to Office Business Applications Services (that's the only acronym I could find relating Microsoft with OBA)?
thanks,
Gustavo
View 1 Replies
View Related
Sep 2, 2006
I have a page for inventory price entry that I have used for a while. Now I need to add a checkbox for whether or not the price includes shipping. I added the checkbox to the form and had it posting 'True' or 'False' to the database as nchar(10) data type. When the gridview pulls up the data, I have the Item Template like this, so it shows a disabled checkbox either checked or not: <asp:CheckBox ID="CheckBox2" runat="server" Checked='<%# Convert.ToBoolean(Eval("Shipping")) %>' Enabled="False" /> This works fine for displaying the values, but I copied the checkbox to the Edit Item Template, but did not disabled this one. At first, I didn't change the databindings, leaving it Convert.ToBoolean(Eval("Shipping")), which allowed me to go into Edit mode, change the checkbox, then click update. At which point it would return to it's original state (meaning Update wasn't actually updating). However if I change the databindings, then the page won't display. I checked the SQL statement, and sure enough, it has theUpdateCommand="UPDATE [PartsTable] ... SET [Shipping] = @Shipping... WHERE [PartID] = @original_PartIDAfter fiddling with the sql statement, now I get Object cannot be cast from DBNull to other types. I think that means that the checkbox is sending a null value to the database.Any insight as to how to get this to work is much appreciated. Thanks in advance.
View 4 Replies
View Related
Nov 6, 2007
I have a report that has one subreport. I am finding that if the entire content of the subreport will not fit within the space remaining on the page that it will not start displaying data from that subreport until the next page of the report, leaving a blank section in the report. I would like it to display as much as possible on the first page and then continue on subsequent pages.
Is there a way?
View 11 Replies
View Related
May 13, 2008
I have had the same Error 29506 that a lot of people are having when installing SP2 for SQL 2005. I've tried the install with myself (a Domain Admin), local Administrator, cascaded full rights down the entire file system structure and still not luck. One thing I'm wondering if it is hanging me up is that all of my databases and logs are not on C:. They are on LUNS on a NetApp SAN (Data is on M: and Logs is on L:). Even the system databases (Master, Model, etc.) are on the LUNs. The error logs referenced permissions to the data directory under the default installation path on C:. Anyone else have this problem? Got a fix? I really don't want to migrate all of my data back to the local machine, apply the patch, them migrate back. Surely this SP should be able to read the data location from the SQL engine. And surely others have their databases on SANs.... I'm at a loss.
Thanks.
View 3 Replies
View Related
May 13, 2008
We are using SQL CE 3.5 on tablet PCs, that synchs with our host SQL 2005 Server using Microsoft Synchronization Services. On the tablets, when inserting a record, we get the following error:
A duplicate value cannot be inserted into a unique index. [ Table name = refRegTitle,Constraint name = PK_refRegTitle
But the only PK on this table is RegTitleID.
The table structure is:
[RegTitleID] [int] IDENTITY(1,1) NOT NULL,
[RegTitleNumber] [int] NOT NULL,
[RegTitleDescription] [varchar](200) NOT NULL,
[FacilityTypeID] [int] NOT NULL,
[Active] [bit] NOT NULL,
The problem occurs when a Title Number is inserted and a record with that number already exists. There is no unique constraint on Title Number.
Has anyone else experienced this?
View 3 Replies
View Related
May 29, 2001
Hi,
I am trying to figure out how to do this.
For each row, only one out of two columns(id1,id2) should be populated. So if the id1 column is already populated and the application tries to fill in something for id2 then we just simply don't want to allow that and vice versa.
I am thinking triggers is the way to go. What do you think?
thanks
Rozina
View 1 Replies
View Related
Sep 21, 2000
using alter table syntax how can i insert the field TramingChoiceCd
Extend the constraint on NetwkChannel table UQ__TetwkChannel__50FB042B to include TramingChoiceCd
View 1 Replies
View Related
Nov 30, 2001
Which is the preferred method Rule, Check Constraint or Trigger?
I want to set a column to todays date when the column is = "T"
else when "F" set it to a future date. Each time there is a insertion into
the table.
View 1 Replies
View Related
Jun 7, 2004
I have a varchar field in a table.I want to restrict the entries in that field as "yes" or "no" nothing else.No record will be allowed for this field without yes or no.My question is is it possible without using any trigger for the table?I want to do it with the help of a constraint.
View 1 Replies
View Related
Oct 13, 2004
When I see desing table option in enterprise manager of a table I don't see any constraints, but when I extract ddl I can see all 6 of them. They are all unique constraints not the check constraints. Is this normal. I am new to SQL Server and would appreciate some explanation.
Thanks
View 2 Replies
View Related
Nov 15, 2007
Hi, i want to put a contraint on a table which much check agains two values in the same column for the same member.
For example, i don't want a male to get information based on breast cancer, and i don't want a female to get information based on prostate cancer.
I have included some sample data. Just copy and paste.
Code Block
DECLARE @MemberLookupValues TABLE (OptionID INT, ValueID INT, Description VARCHAR(20))
INSERT @MemberLookupValues VALUES (3, 10, 'Male')
INSERT @MemberLookupValues VALUES (3, 11, 'Female')
INSERT @MemberLookupValues VALUES (7, 69, 'Prostate Cancer')
INSERT @MemberLookupValues VALUES (7, 70, 'Breast Cancer')
DECLARE @MemberValues TABLE (MemberID INT, OptionID INT, ValueID INT)
INSERT @MemberValues VALUES (1, 3, 10)
INSERT @MemberValues VALUES (1, 7, 69)
INSERT @MemberValues VALUES (1, 7, 70)
INSERT @MemberValues VALUES (2, 3, 11)
INSERT @MemberValues VALUES (2, 7, 69)
SELECT * FROM @MemberLookupValues
SELECT * FROM @MemberValues
I've highlighted the values that must be stopped.
So the basic check would be, IF OptionID = 3 AND ValueID = 10 then it must not allow you to insert the values OptionID = 7 AND ValueID = 70
I hope that makes sense.
Any help will be greatly appreciated, if you need any more informaiton then just ask,
Kind Regards
Carel Greaves
View 4 Replies
View Related
