I have a "Execute DTS Package 2000 " task in SSIS. The SQL 2000 DTS has one task which precedence is "completion". Using SQL2000 it works properly, but when I invoke it from SSIS it doesn€™t respect the precedence. So, when the task above fails it ends the DTS execution.
Is it possible to configure the task to respect the precedences?
Hello all,
I am running a package on a 64-bit server using the 32-bit dtexec. It contains an embedded Execute DTS 2000 package. I deployed the package to the server using the sa account. I set up a SQL Agent job that runs under an account that should have complete admin privileges. The network guys tell me that Legacy components have been installed (although I believe that shouldn't be necessary because SSIS is installed). This is SQL Server 2005, SP2.
When I execute this job, I receive this error message:
Executed as user: Domainuser. ...age Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:13:18 AM Error: 2007-12-17 11:13:35.65 Code: 0xC0010018 Source: Execute DTS 2000 Package Task Description: Error loading a task. The contact information for the task is "Execute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails. End Error Error: 2007-12-17 11:13:35.71 Code: 0xC0010026 Source: Execute DTS 2000 Package Task Description: The task has failed to load. The contact information for this task is "Execute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". End Error Error: 2007-12-17 11:13:35.71 Code: 0xC0024. The step failed.
Is there any way to get this to run?
Thank you very much,
Jessica
I have a simple SSIS package with three "Execute SQL Tasks". I am using ADO.Net Connection to execute SPs on a DB server.
When I execute this package It works fine. So far so good.
Now, I need to implement transation on this package. And problem starts now onwards. When I try to execute package after setting TransationOption = Required for the Sequence container which contains all the tasks, I get following error.
[Execute SQL Task] Error: Failed to acquire connection "NYCDB0008.Export". Connection may not be configured correctly or you may not have the right permissions on this connection.
"NYCDB0008.Export" is the name of the ADO.Net connection. I have been hunting for any solution but all in vain. I have tried changing all DTC settings on the dev as well as Database server.
Please respond if anyone has any solution.
Thanks!
Anand
Hi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
Hi everyone,
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly
2)The selected package cannot be opened
3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
Any guidance or idea about this?
I have imported a series of SQL 2000 DTS packages to our 64bit AMD SQL 2005 server. I then created SSIS pkgs to run each SQL 2000 package using the Execute DTS 2000 package task. Then I deployed these packages to the Yukon server as well.
I can run these packages when launching them via Integration Services from Management Studio on my workstation, but when I try to run them via a SQL Job or the DTExec command on the server, I get this error. Anyone know of a workaround?
OnError,xxxxxx,xxxxxxx,Execute DTS 2000 Package Task,{94769783-575C-4D1E-90F6-C2BDB3EA3CE2},{E05551C1-CDDE-40E3-87B4-C65D4E1B3A53},4/26/2006 3:01:37 PM,4/26/2006 3:01:37 PM,0,0x,This task does not support native Win64 environment. Please run the package in 32-bit WOW environment instead.
OnError,xxxxxx,xxxxxxx,Execute DTS 2000 Package Task,{94769783-575C-4D1E-90F6-C2BDB3EA3CE2},{E05551C1-CDDE-40E3-87B4-C65D4E1B3A53},4/26/2006 3:01:37 PM,4/26/2006 3:01:37 PM,-1073594105,0x,There were errors during task validation.
Is the DTS 2000 Package Task not supported on Win64?
I have installed the SQL Server 2000 DTS components from the November feature pack on both my workstation and the server.
Thanks for your help!
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
Hi,
We have used an execute package task in our master package to execute a child package and we have set the execute out of process=false. This master package is running fine in 32 bit server but is failing in 64 bit server. is there any settings to be done in the server or is it the problem with the property setting(execute out of process)
Vivek S
Hi.
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Any help would be greatly appreciated.
Thanks
Geoff.
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
I have a package A which has execute package task which tryes to execute package B.
I am able to execute package B directly but when i execut epackage A.Its able to open package B but its failing at the very first task in B.The error iam getting is like this
Error: The task "Setup Connections" cannot run on this edition of Integration Services. It requires a higher level edition.
Has any one come accross this before...Help
Thanks
Hi,
I have a Load package which calls 3 other subpackages within it through the execute package task.
When i run the package thru batchfile it runs fine.
But when we run thru Autosys job scheduler i get the following error for the subpackages.
Code: 0xC00220DE
Source: Execute Package Task1
Description: Error 0x80070003 while loading package file "". The system cannot find the path specified.
i have given the path in the config file,which has the server name and the path of the subpackages.
Has anyone come across this situation before.
Pls help!
Thanks,
SVGP.
I'm trying to run a package from another package using Execute package task -
I'm getting the error:
Error: Error 0xC0012050 while preparing to load the package. Package failed validation from the ExecutePackage task. The package cannot run. .
I have Delay validation on the child package. Any other suggestions?
Thanks
Hi All,
I have strange problem. I have a package task that is setup to run a package from a file source. The package ran fine originally but VS placed a shared drive letter for the path. I went back to change it to a UNC path and now the package fails and gives an error saying the connection is not valid and that it failed validation. Going back into the connection manager to check the path and it looks good, even pressing the Browse button shows the correct directory.
What am I doing wrong?
Hi,
We have used an execute package task in our master package to execute a child package and we have set the execute out of process=false. This master package is running fine in 32 bit server but is failing in 64 bit server. is there any settings to be done in the server or is it the problem with the property setting(execute out of process)
Vivek S
I have created for each container to call all the packages in a folder like below, also created a variable.
Then I add execute package task inside of foreach container and selected file system in a location and in connection called currently creating package name finally in connection properties i added variable in expression which i created and mapped into for each loop container. I referred below linkÂ
[URL] ....
All the packages are running but its not ending once all the packages executed its re run and continue the running process, how to stop once all the packages execute.Â
Hello
I'm trying to run a task that executes a script file (cmd). When i run it with in bids with my own users (domain admin) it works. When i start a cmd prompt and try to run the cmd file directly from the network location where it is it works (with my own rights and with the sql server agent user).
Now when i try to run in from smss > agent jobs > job and run job it never completes. Im not getting any error message either it just keeps on running on the step ??? It seems like a rights issue, but the account running the sql server agent is able to execute the cmd file directly from the command prompt.
There are no errors in any error logs anywhere and no error is displayed...
Ps. Im running the job step as a integration service pacgake.
Hi there,
I'm creating an SSIS package that will execute legacy dts packages. The package to be executed is decided at runtime using a sql query task.
Executing a dts package statically works fine, but when I try to set the details of the dts to be run via expressions, I get the error below.
To make it dynamic, I created a variable of type string, and put the package name in here. I also have a string variable for the packageid. Then I set up an expression on the Execute DTS 2000 Package Task that sets the PackageName & PackageID property to this variable.
The PackageId is a string variable I've retrieved using:
select top 1 name,
cast(id AS varchar(50)) id,
cast(versionid AS varchar(50)) versionid
from sysdtspackages
where name = @PackageName
order by createdate desc
When I use the task to set the package id it works find (by selecting a dts, then changing the name), but when I try to provide the package id I get this message:
Error: 0x0 at Execute DTS 2000 Package Task: System.Runtime.InteropServices.COMException (0x8004040E): Invalid GUID specified.
at DTS.PackageClass.LoadFromSQLServer(String ServerName, String ServerUserName, String ServerPassword, DTSSQLServerStorageFlags Flags, String PackagePassword, String PackageGuid, String PackageVersionGuid, String PackageName, Object& pVarPersistStgOfHost)
at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.PackageUtils.LoadDTS8Package(String pkgSrc, String sourceUser, String sourcePwd, Int32 srcType, Boolean bUseTrustedConnection, String packageName, String packagePassword, String packageID, String packageVersionGUID)
at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.LoadPackage()
at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread()
Task failed: Execute DTS 2000 Package Task
but the method signature specifies String PackageGuid, and it is a string..
any ideas??
i tried casting the variable like so:
(DT_GUID) @[User:TSPkgId], as the versionid is a uniqueidentifier on sysdtspackages.. It didn't like that at all (can't cast from type DT_WSTR to DT_GUID error code 0xC00470C2)
I have a main package that calls several other packages using Execute Package Tasks. I also have OnPreExecute, OnPostExecute, and OnError event handlers at the package level to audit the beginning and completion of each package. I want to prevent each task from bubbling up to the package event handlers as well as prevent each task from bubbling up to the main package event handlers. I've tried setting the Propagate variable for each of the event handlers to False and setting the DisableEventHandlers property of each task to True but neither solution seems to work. Is there a way to do this that I'm missing?
View 8 Replies View RelatedI've got a package in SSIS 2012 that has an Execute SQL task in the control flow level.
The SQL in question does an Upsert via the SQL merge statement. What I want to do, is return the count of records inserted and records updated (No deletes going on here to worry about). I'm using the output option to output the changed recs to a table variable.
I've tried returning the values as:
Select Count(*) as UpdateCount from @mergeOutput where Action = 'Update'
and
Select Count(*) as InsertCount from @mergeOutput where Action = 'Insert'
I've tried setting the resultset to both Single rowset and Full rowset, but i'm not seeing anything returned to the package variables I've set for them (intInsertcount and intUpdatecount).
I'm converting a package from DTS to IS. My manager does not want to spend the time re-writing it to make use of the Script task so that's why I'm using a DTS 2000 task which contains some ActiveX.
The tasks themselves run fine when I'm in the designer and click the run button, but when part of the entire package it fails. I search on the error message and nothing comes up.
This is the error message:
Error: System.Runtime.InteropServices.COMException (0x8004043B): Exception from HRESULT: 0x8004043B at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread()
I've set them to run on the main thread but that doesn't seem to help.
Any help would be greatly appreciated!
Thank you,
Kelly
My configuration database is made to work with both SQL Server 2005 and 2000, could this be an error that has to do with that?
Here is the query that I am using...
DECLARE @Server [nchar] (100)
SET @Server = (CONVERT(char(100), (SELECT SERVERPROPERTY('Servername'))))
INSERT INTO [tempdb].[dbo].[Server_Roles] (Server, ServerRole, UserName)
SELECT
@Server,
role.name,
member.name
FROM
sys.server_role_members rm
inner join
sys.server_principals member
ON
rm.member_principal_id = member.principal_id
inner join
sys.server_principals role
ON
rm.role_principal_id = role.principal_id
********Begin Errors***************
" failed with the following error: "Invalid object name 'sys.server_principals'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task I
Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_role_members'.
Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_principals'.
I have a package (PackageA) with an Execute Package Task that execs PackageB. When I run PackageA I get this error on the Execute Package Task :
Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
PackageB has 'EncryptSensitiveWithUserKey' ProtectionLevel. I'm providing passwords in the dtsConfig so I'm guessing I should change it to 'DontSaveSensitive'?
Interestingly, PackageA also has 'EncryptSensitiveWithUserKey' ProtectionLevel, but I don't get an error about PackageA, just on the task that runs PackageB.
(SP1 is installed).
1. I am trying to load data from AS400 DB2 to SQL Database using integration services.
2. I am using microsoft ole DB for Db2 driver to pull data from AS400 and using native SQL driver to load data into MS SQL 2005.
AS400 View to pull this data is---
SELECT UPPER(CHAR(SVSGVL)) AS AccountID, UPPER(CHAR(SVLDES)) AS AccountDesc,
INT(SVSGTP) AS AccountTypeID, INT(SVTR) AS TranslationMethodID, INT(SVDEF) AS AccountValue, INT(SVRM) AS RemeasurementID
FROM V820PRMF.GSVL01
WHERE (UPPER(SVSGMN) = 'ACCT')
ORDER BY AccountID
AccountID String[DT_STR] Lenhth-16
AccountDesc String[DT_STR] Length -30
All other column is int.
MS SQL 2005 is were data to be loaded. Table Info.
CREATE TABLE [dbo].[DimAccount](
[AccountID] [varchar](50) NOT NULL,
[AccountDesc] [varchar](50) NOT NULL,
[AccountTypeID] [int] NOT NULL,
[AccountValueID] [int] NOT NULL,
[TranslationMethodID] [int] NOT NULL,
[RemeasurementMethodID] [int] NOT NULL,
CONSTRAINT [PK_DimAccount_1] PRIMARY KEY CLUSTERED
(
[AccountID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Integration Package
[Destination - Account [34]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".
[Destination - Account [34]] Error: There was an error with input column "ACCOUNTID" (284) on input "Destination Input" (47). The column status returned was: "The value violated the integrity constraints for the column.".
[Destination - Account [34]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (47)" failed because error code 0xC020907D occurred, and the error row disposition on "input "Destination Input" (47)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Account" (34) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
While executing packages in a file from a procedure, I get error:
Error: 2006-10-24 14:58:54.62
Code: 0xC0016016
Source:
Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
End Error
Please let me know how to solve this error.
What this?
An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT ' could not be opened. Operating system error code 2(error not found). Make sure you are accessing a local server via Windows security.".
Hi,
when i am trying to execute package in ssis then given below errors comes many times.how to fix it.any body can ......
in ssis default buffer size 10 mb.
soure is iseries-db2 on as400 in production server ,
and destination is db2 udb on windows in dev server.
usersapce page size in db2 is 16-32k
4 gb ram support in server with 2003 server standard edition.
errors are---
Information: 0x4004800D at CHDRPF 312-315, DTS.Pipeline: The buffer manager failed a memory allocation call for 15728400 bytes, but was unable to swap out any buffers to relieve memory pressure. 3 buffers were considered and 3 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CHDRPF 312-315, DTS.Pipeline: A buffer failed while allocating 15728400 bytes.
Error: 0xC0047011 at CHDRPF 312-315, DTS.Pipeline: The system reports 83 percent memory load. There are 3488509952 bytes of physical memory with 558743552 bytes free. There are 2147352576 bytes of virtual memory with 222920704 bytes free. The paging file has 7416537088 bytes with 3703283712 bytes free.
Error: 0xC0047056 at CHDRPF 312-315, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "DataReader Source" (15437) on component "DataReader Output" (15442). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CHDRPF 312-315, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0x8007000E.
Error: 0xC0047039 at CHDRPF 312-315, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CHDRPF 312-315, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
so what need to do for fix that problem ......
Hi,
I am not comfortable with DTS 2000 but I need to execute a encapsulated DTS 2000 package from a SSIS package. The real problem is when I need to pass SSIS variables to DTS 2000 package. The DTS 2000 package have 3 global variables that I can identify on " Execute DTS 2000 Package Task Editor - Inner Variables ". I believe the SSIS variables must be mapped on " Execute DTS 2000 Package Task Editor - OuterVariables ". How can I associate the SSIS variables(OuterVariables ) to "Inner Variables"? How can I do it? Much Thanks.
João
I'm working with 2005 SSIS and am getting the below error associated with a query when
I try and set up a package that runs other package tasks. It errors in the Package Name (..) lookup after I enter what appears to be a validate location (sql server) and connection information.
I located a post suggesting to add an mmc certificate but that did not seem to help.
I'm sort of assuming that if it was id/passwd related i'd get a more specific error..
Any info would be much appreciated...Thx Owen
An OLE DB error 0x80004005 (Client unable to establish connection) occurred while enumerating packages. A SQL statement was issued and failed.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetPackageInfos(String strFolder, String serverName, String serverUserName, String serverPassword)
at Microsoft.SqlServer.Dts.Tasks.ExecutePackageTask.PackageBrowser.<>c__DisplayClass1.<EditValue>b__0(String path)
at Microsoft.SqlServer.Dts.Tasks.ExecutePackageTask.PackageBrowser.EditValue(ITypeDescriptorContext context, IServiceProvider provider, Object value)
===================================
An OLE DB error 0x80004005 (Client unable to establish connection) occurred while enumerating packages. A SQL statement was issued and failed.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetPackageInfos(String bstrPackageFolder, String bstrServerName, String bstrServerUserName, String bstrServerPassword)
at Microsoft.SqlServer.Dts.Runtime.Application.GetPackageInfos(String strFolder, String serverName, String serverUserName, String serverPassword)
I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
SSIS package working fine directly.I got following error while execute SSIS package from C# console application.
The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]" in the connection manager collection of "OLE DB Destination".
Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
OLE DB Destination failed validation and returned error code 0xC004800B. One or more component failed validation. There were errors during task validation.
Code :Â
  public static string RunDTSPackage()
    {
      Package pkg;
      Application app;
      DTSExecResult pkgResults;
      Variables vars;
      app = new Application();
      pkg = app.LoadPackage(@"D:WORKPackage.dtsx", null);
   Microsoft.SqlServer.Dts.Runtime.DTSExecResult results = pkg.Execute();
}
I have recreate the application with again new connection in SSIS. Still not working.
DB : SQL Server 2008 R2
I am trying to
copy a database from our company's external SQL
Server(production) to our local SQL
Server(development). The Copy Database wizard fails on the step
"Execute SQL Server Agent Job".
Following is the error in the log file.. Please advise
InnerException-->An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)