Works Fine Inside BI Dev. Studio, But Fails When Scheduling It In SQL Server 2005.
Jul 13, 2005Hi!
View 12 RepliesHi!
View 12 RepliesI have a report problem. I'm using a parameter to dynamically control visibility for two tables. If the parameter is set to one value, I want to switch one of the tables to invisible, if the parameter is set to another, I want the other table to be invisible instead.
This all works fine in Visual Studio. When I publish it to my report server, the visibility controls no longer function and both tables always display. Any ideas here?
I'm running 2005, SP2 CTP.
Hi..
I am stuck at a very awkward place. I have created one package which uses an oracle view as its source for data transfer the problem is when i run the package through dtexec it works fine but when i try to schedule it I get the following error
Error: 2008-03-24 13:52:40.22
Code: 0xC0202009
Source: pk_BMR_FEED_oracle Connection manager "Conn_BMR"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.".
I am able to run the package outside the sql job and also connect to the oracle.
I have oracle 9i client installed on the server and sql server is 2005.
Any help would really be appreciated..
Hi,
I am executing a SSIS package using dtexec. 64 bit version of dtexec works fine. But when i use 32 bit version of dtexec, it fails. i have local admin rights. Following is error description. Please help.
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 9:24:30 AM
Error: 2008-03-18 09:24:32.54
Code: 0xC0202009
Source: IMALCRM Connection manager "IMAL SRC"
Description: An OLE DB error has occurred. Error code: 0x800703E6.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" H
result: 0x800703E6 Description: "Invalid access to memory location.".
End Error
Error: 2008-03-18 09:24:32.54
Code: 0xC020801C
Source: Load Fund Detail V_FUND_DETAIL [16]
Description: The AcquireConnection method call to the connection manager "IMA
L SRC" failed with error code 0xC0202009.
End Error
Error: 2008-03-18 09:24:32.54
Code: 0xC0047017
Source: Load Fund Detail DTS.Pipeline
Description: component "V_FUND_DETAIL" (16) failed validation and returned er
ror code 0xC020801C.
End Error
Error: 2008-03-18 09:24:32.54
Code: 0xC004700C
Source: Load Fund Detail DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2008-03-18 09:24:32.54
Code: 0xC0024107
Source: Load Fund Detail
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:24:30 AM
Finished: 9:24:32 AM
Elapsed: 2.078 seconds
I have a report which I have tested and works fine. now I'm trying to use it as a subreport. the "outer" or main report is very simple: it just has a company standard banner and some header/footer information, and then a single subreport. there is no passing of parameters between main report and sub report. the subreport does have its own parameter to govern its dataset, and provides its own default for that.
The error that I'm getting is this:
[rsErrorExecutingSubreport] An error occurred while executing the subreport €˜subreport1€™: An error has occurred during report processing.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. The data extension returned an error during reading the field.
[rsNone] An error has occurred during report processing.
Of course, this doesn't happen when I execute the subreport by itself. What kinds of things should I be looking at to get to the bottom of this. Thanks!
This one has me stumped.
I created an updateable partioned view of a very large table. Now I get an error when I attempt to declare a CURSOR that SELECTs from the view, and a FOR UPDATE argument is in the declaration.
There error generated is:
Server: Msg 16957, Level 16, State 4, Line 3
FOR UPDATE cannot be specified on a READ ONLY cursor
Here is the cursor declaration:
declare some_cursor CURSOR
for
select *
from part_view
FOR UPDATE
Any ideas, guys? Thanks in advance for knocking your head against this one.
PS: Since I tested the updateability of the view there are no issues with primary keys, uniqueness, or indexes missing. Also, unfortunately, the dreaded cursor is requried, so set based alternatives are not an option - it's from within Peoplesoft.
I'm having a strange problem with this but I know (and admit) that the problem is on my PC and nowhere else. My firewall was causing a problem because I was unable to PING the database server, switching this off gets a successful PING immediately. The most useful utility to date is running netstat -an in the command window. This illustrates all the connections that are live and ports that are being listed to. I can establish a connection both by running
telnet sql5.hostinguk.net 1433 and
sqlcmd -S sql5.hostinguk.net -U username -P password
See below:
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:25 0.0.0.0:0 LISTENING
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:443 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1026 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING
TCP 81.105.102.47:1134 217.194.210.169:1433 ESTABLISHED
TCP 81.105.102.47:1135 217.194.210.169:1433 ESTABLISHED
TCP 127.0.0.1:1031 0.0.0.0:0 LISTENING
TCP 127.0.0.1:5354 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51114 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51201 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51202 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51203 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51204 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51206 0.0.0.0:0 LISTENING
UDP 0.0.0.0:445 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:1025 *:*
UDP 0.0.0.0:1030 *:*
UDP 0.0.0.0:3456 *:*
UDP 0.0.0.0:4500 *:*
UDP 81.105.102.47:123 *:*
UDP 81.105.102.47:1900 *:*
UDP 81.105.102.47:5353 *:*
UDP 127.0.0.1:123 *:*
UDP 127.0.0.1:1086 *:*
UDP 127.0.0.1:1900 *:*
Both these utilities show as establishing a connection in netstat so I am able to connect the database server every time, this worked throughout yesterday and has continued this morning.
The problem is when I attempt to use SQL Server Management Studio. When I attempt to connect to tcp:sql5.hostinguk.net, 1433 nothing shows in netstat at all. There is an option to encrypt the connection in the connection properties tab in management studio, when I enable this I do get an entry in netstat -an, see below:
TCP 81.105.102.47:1138 217.194.210.169:1433 TIME_WAIT
TCP 81.105.102.47:1139 217.194.210.169:1433 TIME_WAIT
TCP 81.105.102.47:1140 217.194.210.169:1433 TIME_WAIT
Amost as if it's trying the different ports but you get this time_wait thing. The error message is more meaningful and hopefull because I get:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.) (.Net SqlClient Data Provider)
I would expect this as the DNS has not been advised to encrypt the conection.
This is much better than the : Login failed for user 'COX10289'. (.Net SqlClient Data Provider) that I get, irrespective of whether I enter a password or not.
This is on a XP machine trying to connect to the remote webhosting company via the internet.
I can ping the server
I have enabled shared memory and tcp/ip in protocols, named pipes and via are disabled
I do not have any aliases set up
No I do not force encryption
I wonder if you have any further suggestions to this problem?
I have a simple update statement that is running forever in SQL 2005 but works fine in SQL 2000. We have a new server we put SQL 2005, restored db. The table in question WEEKLYSALESHISTORY I even re-indexed all the indexes and rebuilt the stats as well. But still no luck, still running extremely long. 1 hour 20 minutes.
I'll try to give you some background on these table. Weeklysalehistory has approx 30 fields. I have 11 indesxes set up weekending date being one of them. And replication control has index on lasttrandatetime as well. So I think my indexes are fine.
/* Update WeekEnding Date for current weeks WeeklySales Records */
Update WeeklySalesHistory set
weekendingdate =
(SELECT LastTransDateTime from ReplicationControl
where TableName = 'WEEKHST')
where weekendingdate is null
Weekly sales has approx 100,000,000 rows
Replication control has 631,000 (Ithink I can delete some from here to bring it down to 100 or 200 records) Although I don't think this is issue since on 2000 has same thing and works fine.
I was trying to do this within SSIS and thought that was issue. I am new so SSIS but it runs long even if I just run it as a job with this simple Update statement so I think its something with tables, etc that is wrong.
One thing on noticed if I look at the statistics in SQL Server Management studio there is a ton of stats. some being statistics on indexes which makes sense then I have a ton of hind_113_9_6 and simiiar one like this. I must have 90 or so named like this. Not sure how to check on SQL 2000 all the stats to see if they moved over from there or what. I checked a few other tables and don't have all these extra stats. Could this be causing the issue do I need to delete all these extras? Any help would be greatly appreciated.
Stacy
I have an SQL statement that, when run through SQL Server management studio works fine. However, when I run it on my ASP page, it doesn’t update the data! I have tried both as a stored procedure and as a simple commandText update statement.
All I do is simly update the value of a column based on another column – nothing particularly complex: update customer set dateChanged = System.DateTime.Now.ToString("dd-MMM-yyyy"), CURRSTAT = 'Active',custType = case WHEN cust_Changing_To IS NOT NULL THEN cust_Changing_To ELSE custType END,cust_Changing_To = NULLFROM customers_v WHERE CURRSTAT = 'Changing'
As you can see, nothing that complex. The line that is causing the problem is the case:
custType = case WHEN cust_Changing_To IS NOT NULL THEN cust_Changing_To ELSE custType END
all it does is if another nullable integer column is not null, sets it to the value of that column, else it retains its existing value.
Like I say, this works in Management studio, but I cannot get it to execute programatticaly from an asp page.
No exceptions are being thrown, it just doesn’t update the data.
Any ideas?
Thanks
I have a stored procedure which is run through MS Access (yuck). It does not appear to fail, but it does not populate certain tables, and is also rather complex. I did not write it, and am trying my best to fix it. However, when I run the same procedure with the same parameters from within Management Studio (database state is the same, I restore from backup before trying out each execution) it populates the tables correctly. I have profiled both executions (from MS and from Access) and it is running with the same NTUsername, and thus the same permissions. The process used to work and then some changes were made to the DB which seem to have broken it from Access. As far as I know, the Access code has not changed, although it may have done so. The proc call from Access uses the same parameters, and does not throw an error, although it does not appear to close the connection to the DB (I'm looking into this). Access uses an ODBC connection to connect to SQL Server.
Any ideas?
I can run the following query in Management Studio, but get the error listed below when I run it from the data tab in Reporting Services:
declare @starttime as datetime
declare @endtime as datetime
declare @timezone as integer
declare @date as datetime
set @timezone = 1
set @date = '5/1/2007'
set @starttime = dateadd(hh, @timezone, @date)
set @endtime = dateadd(d, 1, @starttime)
select @Starttime, @endtime from site
Error Message:
TITLE: Microsoft Report Designer
------------------------------
An error occurred while executing the query.
The variable name '@starttime' has already been declared. Variable names must be unique within a query batch or stored procedure.
------------------------------
ADDITIONAL INFORMATION:
The variable name '@starttime' has already been declared. Variable names must be unique within a query batch or stored procedure. (Microsoft SQL Server, Error: 134)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=134&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
What I am trying to accomplish is the ability for users to select which time zone they want the data in the report to display in. To do this, I created a timezone parameter that has the offset from Central Time (which is how all data is stored in our database).
Any help would be greatly appreciated!
Currently I receive the following error when executing script within a DTS package in SQL 2005 (it seems to be working in SQL 2000):
Processed 27008 pages for database 'Marketing', file 'Marketing_Data' on file 5.
Processed 1 pages for database 'Marketing', file 'Marketing_Log' on file 5.
BACKUP DATABASE successfully processed 27009 pages in 15.043 seconds (14.708 MB/sec).
(5 row(s) affected)
Msg 213, Level 16, State 7, Line 1
Insert Error: Column name or number of supplied values does not match table definition.
Msg 3013, Level 16, State 1, Line 1
RESTORE FILELIST is terminating abnormally.
The code I am using is:
-- the original database (use 'SET @DB = NULL' to disable backup)
DECLARE @DB varchar(200)
SET @DB = 'Marketing'
-- the backup filename
DECLARE @BackupFile varchar(2000)
SET @BackupFile = 'C:SQL2005 dbsMarketing.dat'
-- the new database name
DECLARE @TestDB2 varchar(200)
SET @TestDB2 = datename(month, dateadd(month, -1, getdate())) + convert(varchar(20), year(getdate())) + 'Inst1'
-- the new database files without .mdf/.ldf
DECLARE @RestoreFile varchar(2000)
SET @RestoreFile = 'C:SQL2005 dbs' + @TestDB2
DECLARE @RestoreLog varchar (2000)
SET @RestoreLog = 'C:SQL2005 dbs' + @TestDB2
-- ****************************************************************
-- no change below this line
-- ****************************************************************
DECLARE @query varchar(2000)
DECLARE @DataFile varchar(2000)
SET @DataFile = @RestoreFile + '.mdf'
DECLARE @LogFile varchar(2000)
SET @LogFile = @RestoreLog + '.ldf'
IF @DB IS NOT NULL
BEGIN
SET @query = 'BACKUP DATABASE ' + @DB + ' TO DISK = ' + QUOTENAME(@BackupFile, '''')
EXEC (@query)
END
-- RESTORE FILELISTONLY FROM DISK = 'C: empackup.dat'
-- RESTORE HEADERONLY FROM DISK = 'C: empackup.dat'
-- RESTORE LABELONLY FROM DISK = 'C: empackup.dat'
-- RESTORE VERIFYONLY FROM DISK = 'C: empackup.dat'
IF EXISTS(SELECT * FROM sysdatabases WHERE name = @TestDB2)
BEGIN
SET @query = 'DROP DATABASE ' + @TestDB2
EXEC (@query)
END
RESTORE HEADERONLY FROM DISK = @BackupFile
DECLARE @File int
SET @File = @@ROWCOUNT
DECLARE @Data varchar(500)
DECLARE @Log varchar(500)
SET @query = 'RESTORE FILELISTONLY FROM DISK = ' + QUOTENAME(@BackupFile , '''')
CREATE TABLE #restoretemp
(
LogicalName varchar(500),
PhysicalName varchar(500),
type varchar(10),
FilegroupName varchar(200),
size int,
maxsize bigint
)
INSERT #restoretemp EXEC (@query)
SELECT @Data = LogicalName FROM #restoretemp WHERE type = 'D'
SELECT @Log = LogicalName FROM #restoretemp WHERE type = 'L'
PRINT @Data
PRINT @Log
TRUNCATE TABLE #restoretemp
DROP TABLE #restoretemp
IF @File > 0
BEGIN
SET @query = 'RESTORE DATABASE ' + @TestDB2 + ' FROM DISK = ' + QUOTENAME(@BackupFile, '''') +
' WITH MOVE ' + QUOTENAME(@Data, '''') + ' TO ' + QUOTENAME(@DataFile, '''') + ', MOVE ' +
QUOTENAME(@Log, '''') + ' TO ' + QUOTENAME(@LogFile, '''') + ', FILE = ' + CONVERT(varchar, @File)
EXEC (@query)
END
Hi all,I'm having a big problem here. I can't seem to connect to a database of MSSQL Server 2005... Here is what I've did:1. Under the Server Explorer>Data Connections. Right click and choose "Add Connection..."2. Data Source was "Microsoft SQL Server Database File". Click OK.3. I browse to the database in the MSSQL.2/MSSQL/Data folder.4. Click on the "Advanced" button, and change the default DataSource from .SQLEXPRESS to .MSSQLSERVER. Click OK5. Received this error:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default setting SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) Only .SQEXPRESS that I was able to connect to... i've tried the solution from Microsoft, opened SQL Server 2005 Surface Area Configuration and enabled "Local and remote connections", checked the option "Using both TCP/IP and named pipes" but it didn't help. This is frustrating because I can't get the Membership provider, login to work on my host. Please help. Thank you very much,Kenny.
View 2 Replies View RelatedI have SSRS in Visual Studio. I created a query that works fine in SQL Server Management Studio, but when pasted into Visual Studio I get the error "An expression of non-boolean type specified in a context where a condition is expected, near '('.
Here is the query. Can anyone help on why this isn't working? Thanks.
SELECT CASE WHEN MONTH(dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate) = MONTH(GETDATE()) AND YEAR(dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate) = YEAR(GETDATE())
THEN dbo.MAS_CCS_ARO_InvHistoryDetail.SOExtChargeAmount ELSE 0 END AS CurrentMonth,
CASE WHEN SubString(dbo.MAS_CCS_GL_Account.Account,1,3) = '400' THEN 'ALEDO' ELSE ' ' END AS Location,
dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate, dbo.MAS_CCS_ARN_InvHistoryHeader.InvoiceNumber,
dbo.MAS_CCS_AR1_CustomerMaster.CustomerName, dbo.MAS_CCS_ARO_InvHistoryDetail.DetailSeqNumber,
dbo.MAS_CCS_ARO_InvHistoryDetail.LineType, dbo.MAS_CCS_GL_Account.Account, dbo.MAS_CCS_ARO_InvHistoryDetail.SOExtChargeAmount
FROM dbo.MAS_CCS_AR1_CustomerMaster, dbo.MAS_CCS_ARN_InvHistoryHeader, dbo.MAS_CCS_ARO_InvHistoryDetail,
dbo.MAS_CCS_GL_Account
WHERE dbo.MAS_CCS_AR1_CustomerMaster.CustomerNumber = dbo.MAS_CCS_ARN_InvHistoryHeader.CustomerNumber AND
dbo.MAS_CCS_ARN_InvHistoryHeader.InvoiceNumber = dbo.MAS_CCS_ARO_InvHistoryDetail.InvoiceNumber AND
dbo.MAS_CCS_ARO_InvHistoryDetail.SOGLSalesAcct = dbo.MAS_CCS_GL_Account.AccountKey
hi,
I have many jobs on sql 05 and all work but one. This one writes to an Access DB on the same server as SQL. The package works fine. But when executed in the context of the SQL Agent job, it fails.
Jobs that write to a text file work fine. The Access DB has no password required. By the way, that job in sql 2000 worked fine.
Any ideas?
I did a small package with only one ODBC connection (Merant 3.70 32-Bit Progess). This package runs well in Visual Studio and fails when runs by SQL Server Agent.
Configuration:
SQL Server Agent on a 32Bit server.
The ODBC connection configuration in available on System DSN on this server.
The user of Server Agent have full access (Admin).
Connect Manager Provider: ".Net ProvidersOdbc Data Provider"
SQL Server version: 9.0.3042
Error Message:
Executed as user: TEKCON cadmin. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 16:50:33 Error: 2007-06-11 16:50:33.62 Code: 0xC0047062 Source: Data Flow Task DataReader Source [1] Description: System.Data.Odbc.OdbcException: ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcCon... The package execution fa... The step failed.
I created a .bat file with this instruction and It's run well:
dtexec /f "C:Program FilesMicrosoft SQL Server90DTSPackagesIntegration Services Project estcom.dtsx"
pause
Why it's not running with SQL Server Agent???
SQL 2005 SP2 install succeeds but in SQL Maintenance Studio the instance is still 9.0.1399. Also when I interogate using TSQL it is reported as 9.0.1399
Here's the log (I did try it a couple of times)
Time: 01/25/2008 13:25:05.338
KB Number: KB921896
Machine: ------------- (I took this out)
OS Version: Microsoft Windows Server 2003 family, Standard Edition Service Pack 2 (Build 3790)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Setup Support Files ENU 9.2.3042 x86
Reporting Services (MSSQLSERVER) ENU SP2 9.00.3042.00 x86 STANDARD
SQL Server Native Client ENU 9.00.3042.00 x86
Client Components ENU SP2 9.2.3042 x86 STANDARD
MSXML 6.0 Parser ENU 6.10.1200.0 x86
SQLXML4 ENU 9.00.3042.00 x86
Backward Compatibility ENU 8.05.2004 x86
Microsoft SQL Server VSS Writer ENU 9.00.3042.00 x86
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Setup Support Files
Product Version (Previous): 3042
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlSupport.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Reporting Services (MSSQLSERVER)
Product Version (Previous): 3042
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRS9_Hotfix_KB921896_sqlrun_rs.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Native Client
Product Version (Previous): 3042
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlncli.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Client Components
Product Version (Previous): 3042
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : MSXML 6.0 Parser
Product Version (Previous): 1200
Product Version (Final) : 6.10.1129.0
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_msxml6.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQLXML4
Product Version (Previous): 3042
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlxml4.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Backward Compatibility
Product Version (Previous): 2004
Product Version (Final) : 2004
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SQLServer2005_BC.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Microsoft SQL Server VSS Writer
Product Version (Previous): 3042
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlWriter.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
Success
Exit Code Returned: 0
If this post belongs somewhere else I appologize. I have spent several days trying to solve this problem with no luck. My site is online. Hosted at NeikoHosting. I can connect to the database remotely when adding a datacontrol. It tests fine. But when running the page it won't connect. Even if I go in and change the Web.Config connection string to a local Data Source provided to me by Neiko, it still won't work. It just won't connect. Here are the two connection strings in the Web.Config, minus my login info: Only the remote string will pass testing. Neither works on the site. <add name="yourchurchmychurchDBConnectionString" connectionString="Data Source=MSSQL2K-A;Initial Catalog=yourchurchmychurchDB;Persist Security Info=True;User ID=me;Password=pwd" providerName="System.Data.SqlClient" />
<add name="yourchurchmychurchDBConnectionString2" connectionString="Data Source=66.103.238.206;Initial Catalog=yourchurchmychurchDB;Persist Security Info=True;User ID=me;Password=pwd" providerName="System.Data.SqlClient" />
Here is the stack trace, if that helps.
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[OleDbException (0x80004005): [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.]
System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection) +1131233
System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +53
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.OleDb.OleDbConnection.Open() +37
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.FormView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.FormView.EnsureDataBound() +163
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +50
System.Web.UI.Control.PreRenderRecursiveInternal() +170
System.Web.UI.Control.PreRenderRecursiveInternal() +170
System.Web.UI.Control.PreRenderRecursiveInternal() +170
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
So....... HELP!!!!
Thank you!
My DTS Package work fine if I Execute it manually, but I need to do it automatically just after midnight. I defined my schedule and made sure the job was present in the SQL Server Agent>Jobs, but it fails and the Job History shows the following error:
DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005) Error string: [Microsoft][ODBC Microsoft Access Driver] Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 1901 (76D) Error string: [Microsoft][ODBC Microsoft Access Driver] Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSDataPumpTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.
Help!!!
hi all
I have the following query which works fine when it's executed as a single query. but when i union the result of this query with other queries, it returns a different set of data.
any one know why that might be the case??
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc
i've included the union query here for completeness of the question
begin
declare @current_date datetime
set @current_date = GETDATE()
select top 100 _id, callback_date, priority, recency, frequency from
(
(
select top 10 _id, callback_date, 10 priority, @current_date recency, 1 frequency --, DATEPART(hour, callback_date) "hour", DATEPART(minute, callback_date) "min"
from topcat.class_contact
where status ='callback'
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) -- all call backs within that hour will be returned
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) <> 0)
order by callback_date asc
--order by priority desc, DATEPART(hour, callback_date) asc, DATEPART(minute, callback_date) asc, callback_date asc
)
union
(
select top 10 _id, callback_date, 9 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'callback'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) = 0)
order by callback_date asc
)
union
(
select top 10 _id, callback_date, 8 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'No Connect'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
order by callback_date asc
)
union
(
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc
)
) contact_queue
order by priority desc, recency desc, callback_date asc, frequency desc
end
Hi,
I have a report which has multivalue parameters enabled and If i give NULL it displays everything correctly. But if I give different ClientId it doesnt do it in the report.. But if i run my sproc in VS2005 and in ssms it works the way i want it. this is my sproc
Code Snippet
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER Procedure [dbo].[usp_GetOrdersByOrderDate]
@StartDate datetime,
@EndDate datetime,
@ClientId nvarchar(max)= NULL
AS
Declare @SQLTEXT nvarchar(max)
if @ClientId is NULL
BEGIN
SELECT
o.OrderId,
o.OrderDate,
o.CreatedByUserId,
c.LoginId,
o.Quantity,
o.RequiredDeliveryDate,
cp.PlanId,
cp.ClientPlanId
--cp.ClientId
FROM
[Order] o
Inner Join ClientPlan cp on o.PlanId = cp.PlanId -- and o.CreatedByUserId = cp.UserId
Inner Join ClientUser c on o.CreatedByUserId = c.UserId
WHERE
--cp.ClientId = @ClientId
--AND
o.OrderDate BETWEEN @StartDate AND @EndDate
ORDER BY
o.OrderId DESC
END
ELSE
BEGIN
SELECT @SQLTEXT = 'Select
o.OrderId,
o.OrderDate,
o.CreatedByUserId,
c.LoginId,
o.Quantity,
o.RequiredDeliveryDate,
cp.PlanId,
cp.ClientPlanId
--cp.ClientId
FROM
[Order] o
Inner Join ClientPlan cp on o.PlanId = cp.PlanId --AND cp.ClientId in ('+ convert(Varchar, @ClientId) + ' )
Inner Join ClientUser c on o.CreatedByUserId = c.UserId
WHERE
cp.ClientId in (' + convert(Varchar,@ClientId) + ')
AND
o.OrderDate BETWEEN ''' + Convert(varchar, @StartDate) + ''' AND ''' + convert(varchar, @EndDate) + '''
ORDER BY
o.OrderId DESC'
exec(@SQLTEXT)
END
--return (@SQLTEXT)
I have 2 datasets in this report one for the above sproc and other dataset that gives me the clientname and it is as follows
Code Snippet
ALTER Procedure [dbo].[usp_GetClientsAll]
@ClientId nvarchar(max) = NULL
AS
--Declare @ClientId nvarchar(max)
SELECT
NULL ClientId,
'<All Clients >' ClientName
FROM
Client
Union
SELECT
ClientId,
ClientName
FROM
Client
Where
ClientId = @ClientId
OR
(
ClientId = ClientId
OR
@ClientId IS NULL
)
In the first dataset Parameter list i have omitted ClientId but kept it in the report parameter.. So when i give select all it works.. but when i just select particular it gives me the same result as Select all..
any help will be appreciated..
REgards
Karen
We are running MS RS and SQL Server 2000 SP3.
We have one LEDGER, where all the daily activities are stored. The LEDGER table has 4 indexes (1 clustered and 3 non-clustered). To get AR we use this table.
Well problem is some times in 1-2 months, any simple AR query takes a long time and every other client gets slow response (queries are very slow or sometimes block).
If we DROP any index on LEDGER table and again put it back (RECREATE), all our queries work fine and faster. This goes on till 1-2 months, till we see the same issue again.
This is a classic case happened today. Queries were running fine till morning 8 AM. We upload some 50 thousand records to Ledger table (Data Conversion). Well after 30 mins, all simple AR queries started taking a long time. We DROPPED an index in LEDGER table and everything was faster....Just to be same we added back the same index again.......everything is Faster.....
What is this. ....is it our QUERY, index or huge Transactions or no free space ???
We are scheduled to run SP4, next week. But is there any solution in the mean time on what is this?
Also is they any way to KILL all SQL server processes that take more than a mins. We just don't want ALL our client to Slow down because of one query????
Thanks,
Hey I had a table with a column of data encrypted in a format. I was able to decrypt it and then encrypt it using Symmetric keys and then updating the table column with the data. Now, there is a user sp which needs to encrypt the password for the new user and put it in the table. I'm not being able to make it work. I have this so far. Something somewhere is wrong. I dont know where. Please help Thanks. I used the same script to do the encryption initially but that was for the whole column. I need to see the encrypted version of the @inTargetPassword variable. But it's not working. It doesn't give me an error but gives me wrong data...
declare @thePassword as varbinary(128)
,@inTargetPassword as varchar(255)
,@pwd3 as varchar(255)
,@theUserId bigint
set @theUserId= 124564
set @inTargetPassword = 'test'
OPEN SYMMETRIC KEY Key1
DECRYPTION BY CERTIFICATE sqlSecurity;
Select @pwd3=EncryptByKey(Key_GUID('Key1')
, @inTargetPassword, 1, HashBytes('SHA1', CONVERT( varbinary, [UserObjectId])))
from table1 where UserObjectId= @theUserId
close symmetric key Key1
People,I'm trying to publish my first website and am having a few problems.I've got Visual Web Developer 2005 Express and am trying to use the Personal Website Starter Kit. (my SQL server is SQL Server Express Edition 2005 - which is also running on my local machine)It seems to work fine when I run it on my localhost, as soon as I ftp it up to my web hosting company, I get an error message (see below) :-An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) My hypothesis is :-It would appear to me that when running locally, the starter kit website uses my installation of SQL 2005 Express Edition, but when I upload all the files, I'm guessing the application is still trying to point at a local instance of SQL on my local PC which it now cannot see. I'm guessing I need to somehow upload the SQL database onto my web host (I've purchased 100M of SQL Server 2005 space), and point the application at that SQL instance instead. But I don't know if I'm right about all this, or indeed how to do it if I am. Can anyone help?Much thanks in advance,Will
View 1 Replies View Relatedworks fine in designer but when i load the report services
I get the following error
anybody know what to do
there is one subreport with this report
maybe the passing value but what could be wrong ????
Item has already been added. Key in dictionary: '9' Key being added: '9'
the following SQL works fine in SQL2000 but gets a permissions error when run on SQL2005:
IF not exists (SELECT * FROM tempdb.dbo.sysindexes WHERE NAME = 'PK_tblGuidContractMove')
BEGIN
IF @DEBUG = 1 PRINT 'airsp_CopyContracts.PK_tblGuidContractMove'
EXECUTE('ALTER TABLE #tblGuidContractMove ALTER COLUMN guidSource GUID NOT NULL')
EXECUTE('ALTER TABLE #tblGuidContractMove ALTER COLUMN guidDestination GUID NOT NULL')
EXECUTE('ALTER TABLE #tblGuidContractMove ALTER COLUMN guidContractMove GUID NOT NULL')
EXECUTE('ALTER TABLE #tblGuidContractMove WITH NOCHECK ADD
CONSTRAINT [PK_tblGuidContractMove] PRIMARY KEY CLUSTERED
(
[guidSource],
[guidDestination],
[guidContractMove]
) ON [PRIMARY]')
END
The user permissions are set the same in both 2000 and 2005 can you please explain what changed and what are the minimum permissions need for the user to be able to make these changes to the temporary table which the user created.
HI,
I am having a strange error coming in SQL server 2005.
I had a DTS package developed in SQl server 2000. Then i had migrated that DTS package to SSIS package using Execute DTS 2000 package. The conversion is successfull.
Then when i manullt execute this package it runs successfully without giving any error.
But then wheh i schedule a SQL server agent job for the same above SSIS package it fails giving me some cryptographic error as follows:
Message
Executed as user: CATOS-CGDBTUW02SYSTEM. ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "SQLPassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:01.00 Code: 0x00000000 Source: Execute DTS 2000 Package T... The package execution fa... The step failed.
Not sure why is this happening.
Manually running the SSIS package from Visual studio does not gives error, but the same SSIS package when is been schedule from SQL server 2005's SQL server agent job it fails giving above error.
Please help me out how to rectify whith this.
Thanks.. in advance
Regards,
Ashok
Hi..
I am getting a xml stream of data and putting it to a object and then calling a big sproc to insert or update data in many tables across my database... But there is one Table that i am having trouble inserting it.. But if i run an update it works fine... This my code for that part of the sproc..
IF Exists(
SELECT
*
FROM
PlanEligibility
WHERE
PlanId = @PlanId
) BEGIN
UPDATE
PlanEligibility
SET
LengthOfService = Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS
ELSE @rsLengthOfService END,
EligibilityAge = CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End,
EntryDates = @EntryDates,
EligiDifferentRequirementsMatch = Case When @PD_EmployeeContribution = 0 Then 0
When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --@CompMatchM,
LengthOfServiceMatch = CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END,
EligibilityAgeMatch = CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END,
OtherEmployeeExclusions = @OtherEmployeeExclusions
WHERE
PlanId = @PlanId
END
ELSE BEGIN
INSERT INTO PlanEligibility
(
PlanId,
LengthOfService,
EligibilityAge,
EntryDates,
EligiDifferentRequirementsMatch,
LengthOfServiceMatch,
EligibilityAgeMatch,
OtherEmployeeExclusions
)
VALUES
(
@PlanId,
Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS
ELSE @rsLengthOfService END,--@rsLengthOfService,
CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End, --@EligibilityAge,
@EntryDates,
Case When @PD_EmployeeContribution = 0 Then 0
When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --having trouble here
CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END,
CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END, --EligibilityAgeMatch,@EligibilityAgeMatch,
@OtherEmployeeExclusions
)
END
Any help will be appreciated..
Regards,
Karen
We have a valid full backup of a database. We know it is valid, we have restored it twice from the network with no problems, but we do not have access to the network location from our sandbox environment.
The .bak file is sizable at about 9GB. The .bak file resides on our internal network, in a SAN drive. No problems there. When we copy the file from there into a sandbox environment to attempt the restore in the sandbox environment it gets corrupted. We've tried three different times and all three different times it gets corrupted. First time we copied the file over to the sandbox the restore went up to 50% and failed. The second time we copied the file again and attempted the restore again it failed at 70%.
The third time it failed at 60%. The error message we get during the restore is "...Read on ... failed: 13(The data is invalid) Msg 3013, Level 16, State 1, Line 1 Restore database is terminating abnormally."
Now some background here. To move the file our network team is doing this: they have this .vmdk file that they mount out in our production environment (which has access to the network location where the .bak file is), copy the file into the drive, then move the .vmdk file into the sandbox environment(which does not have access to the network location), mount the drive in the sandbox environment, and then I have access to the .bak file from within the sandbox environment.
Something in the process of using the .vmdk file to move the .bak file from production into the sandbox is causing the file to get corrupted.
I have an ASP.NET webform:This connection works: "Server=localhost;uid=sa;pwd=;database=pubs"but this connection DOES NOT work: "Server=dnrsqlt1;uid=sa;pwd=;database=pubs"dnrsqlt1 is a sql server my network.Do I have to do something to users ASPNET or IUSER_Machinename on the remote machine
View 6 Replies View Related
Hello I am receiving the dreaded mail error listed above. I can send out a test E-mail from Enterprise Manager to operators, but I cannot run this Transact query:
EXEC master.dbo.xp_sendmail @RECIPIENTS = araz***@***.com(removed email address),
@SUBJECT = 'test'
I receive:
Server: Msg 18025, Level 16, State 1, Line 0
xp_sendmail: failed with mail error 0x80040111
I have stopped/restarted the SQL SERVER AGENT but haven't done much else as I haven't been able to.
Should it work through transact SQL if the test email works from Enterprise Manager?
This is SQL 2000 SP4 running on Win2K in the domain. Thank you.
I am extracting data from an Oracle database and have installed the latest x64 ODAC. When I run the 64 bit dtexec in cmd the package runs fine with no errors, but when creating and executing a SSIS job in the agent it fails. I've tried creating the job using CmdExec as well and I get the same errors:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 64-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:12:43 AM
Error: 2007-08-15 11:12:45.63
Code: 0xC0202009
Source: Load Dimension Data Connection manager "ora"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x800703E6.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x800703E6 Description: "Invalid access to memory location.".
End Error
Error: 2007-08-15 11:12:45.65
Code: 0xC020801C
Source: CopyCustomers CustomerSource [1]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ora" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2007-08-15 11:12:45.65
The CmdExec job step uses the _exact_ same command as the one I execute successfully in cmd:
"c:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /FILE "C:PackagesLoad Dimension Data.dtsx" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
I have managed to find two work arounds, but they are quite ugly:
1) Schedule the package execution using Windows Task Scheduler, basically create a bat file which runs the package.
2) Schedule the package in SQL Server agent, but as T-SQL script and use xp_cmdshell, i.e. EXEC xp_cmdshell 'dtexec /FILE "C:PackagesLoad Dimension Data.dtsx" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW'
Both work and use the 64 bit dtexec. Not that elegant though..
CmdExec and the 32 bit version of dtexec works, but is not good enough for me since we bought new hardware and 64 bit software just to be able to address more memory. Has anyone managed to execute a SSIS package successfully using the agent and the 64 bit OraOLEDB.Oracle.1?
Any help would be greatly appreciated. Thanks!
Btw, I am using Windows Server 2003 x64 and SQL Server with SP2.
I have two calls to stored procedures that in an SSIS package fails silently. They are simply not executed in production but works fine in test, nothing happens and the sql server agent reports that everything has gone just fine.
In test they have 1 server with db A and B. No issue here.
In prod they have 2 servers with db A and B. On server 1 sql server agent executes a job that includes an SSIS package that on server 2 runs a couple of sp's. That user is db owner on server 2 db B and yet nothing happens. The sp's are not executed.
If I in prod run the job manually then it works, but not when run with the sql server agent account that as said is even db owner.