Hi,
I've created SQL Server job that executes my IS package in regular schedule, is there a way to redirect IS logging (Progress tab when the package is executed from VS) to flat file in same path as my packge.
When my job fails I want to know wich particular step fail and progress tab olso contain usefull info like the duration for each step.
Thank very much for your help
Can someone tell me if SQL server logs individual inserts when copying from Flat File to OLE DB Destination? If so, can this be turned off?
ULTIMATELY, I would like to use a Bulk Insert task, but it looks like it is pretty specific to a single DB and a single table in the DB. I would like the Bulk Insert task to be generic enough to where I can specify (via Parameters) the DB and table for the Bulk Insert because this task will be performed in an iteration of many different flat files.
Sorry I never seem to have a "simple" question. My DBA is breathing down my neck here..
Hi
I am trying to use a conditional split task so that I can check for specific fields. If the value doesn't exist I am piping the records to a derived field task, where I add an error. I then try to send these records to a flat file destination so that I can keep track of them. However, when I execute the SSIS data flow task I get the following error
[Log Invalid Records [5496]] Warning: The process cannot access the file because it is being used by another process.
This file isn't being used by any other process as far as I can tell, and the only process using it is the SSIS task trying to write to it.
If anyone has any ideas, then I would really really appreciate it
Thanks
Darrell
i had setup the merge replication across the server but each next morning i find that replication syncronization has stop with following error
The merge process was unable to access row metadata at the 'Subscriber'. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to write to, or use SQL Profiler to determine the source of the failure. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147200996)
for this i manually restrat the syn. agent by stopping and then starting agent.
plz tell me how can i fix this hell of message or tell me how i call start/stop merge agent on command line so that i make script starting and stoping agent as job and will configure to run every morning.
regards
Ahmad Drshen
How to write to a flat file, using a stored procedure?
Thank you,
SQL Server 2005 (SP2).
Smith
Hey Everyone,
I have a Data-Flow task embedded in a Sequence Container (does not fail component on error) on the Control Flow panel of the SSIS designer. This data flow task contains a connection to a Flat File Source -> A Data Transformation -> Into an OLE Db Destination.
The problem is that the Flat File isn't always delimited properly -> the client cannot be relied on to do this.
My question is when the delimiters are messed up, how can I capture the offending error row(s) from the Flat File Source?
What I've tried:
1) Set every column in the source flat file on error to: Redirect Row
2) Added a Script Transformation to pull the description and the record id out of the offending row
3) Added an Error file flat file destination to the end of the flow.
The package always fails on the Flat File Source and never Redirects the offending Row to the error output - I never see my onError Script Transformation go Green, Red, or Yellow - SSIS doesn't let it get there.
I'm really new to SSIS so sorry if this is a super basic question.
Here is the Error Text:
[Source - InventTable_csv [1]] Error: The column delimiter for column "RECID" was not found.
[Source - InventTable_csv [1]] Error: An error occurred while processing file "C:------InventTable.csv" on data row 15228.
[DTS.Pipeline] Error: The PrimeOutput method on component "Source - InventTable_csv" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I do have the MaxErrorCount set to 1 on the Data Flow Task but still think I should see my script task execute and a log entry be generated.
Any Ideas?
Matt
I cannot seem to get my flat file to write columns in error when inserting into a SQL table. I have tried a few examples from MS and did not get anything written to my flat file output. I have set the Source Error Output on this flat file and it uses a script task to created the error description and then write it to a Flat File Destination.
I am new to SSIS and have not had any formal training on it. However, I am very familiar with VS.Net/c# and SQL 2000 DTS - I need to get this working ASAP as there are 45 total flat files that need to be processed. Once I have this solved for one, the rest will follow suit.
If more details would help, I can provide them.
Kind Regards,
Ron
I have a Problem with my destinations. I have a split condition with two ways the flow can use.
In this case: all and Date.
All and Date can be set by using a variable. Its working good.
When a user fills the variable with a date value (cast to string) the conditional split executes the correct flow with all the needed rows... The same time the all flow will be executed with 0 rows. In the end the destionation file for the all values will be overwritten with nothing. The same on the other hand when a user fills the variable with the all value, the date file is empty. What can i do to make sure that the files are not empty?
Hi,
I tried to backup the master key by the following syntax :
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'mypassword'
BACKUP MASTER KEY TO FILE = 'c: empmaster' ENCRYPTION BY PASSWORD = 'mypassword'
but it failed and i got the following message:
Cannot write into file 'c: empmaster'. Verify that you have write permissions, that the file path is valid, and that the file does not already exist.
NB: I am using the "sa" user to execute this command.
I know that we have a security permission issue , but where and how ?
Regards,
Tarek Ghazali
SQL Server MVP
Hi,
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
Did someone else faced this issue?
Thanks,
AQ
Hi,
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
Any inputs will be appreciated.
M.Shah
Hi all,
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
thanx
First, a couple of important bits of information. Until last week, I had never touched SISS, and therefore, I know very little about it. I just never had the need to use it...until now. I was able to convert my first 3 flat files to SQL2005 tables by right clicking on "SISS Package" and choosing "SISS Import and Export Wizard". That is the extent of my knowledge! So please, please, please be patient with me and be as descriptive as possible.
I thought I could attach some sample files to this post, but it doesn't look like I can. I'll just paste the information below in two separate code boxes. The first code box is the flat file specifications and the second one is a sample single line flat file similar to what I'm dealing with (the real flat file is over 2 gigs).
My questions are below the sample files.
Code Snippet
Record Length 400
Positions Length FieldName
Record Type 01
1,2 L=2 Record Type (Always "01")
3,12 L=10 Site Name
13,19 L=7 Account Number
20,29 L=10 Sub Account
30,35 L=6 Balance
36,37 L=1 Active
37,41 L=5 Filler
Record Type 02
1,2 L=2 Record Type (Always "02")
3,4 L=2 State
5,30 L=26 Address
31,41 L=11 Filler
Record Type 03
1,2 L=2 Record Type (Always "03")
3,6 L=4 Coder
7,20 L=14 Locator ID
21,22 L=2 Age
23,41 L=19 Filler
Record Type 04
1,2 L=2 Record Type (Always "04")
3,9 L=7 Process
10,19 L=10 Client
20,26 L=6 DOB
26,41 L=16 Filler
Record Type 05
1,2 L=2 Record Type (Always "05")
3,16 L=14 Guarantor
17,22 L=6 Guar Account
23,23 L=1 Active Guar
**There can be multiple 05 records, one for each Guarantor on the account**
and the single line flat file...
Code Snippet
01Site1 12345 0000098765 Y 02NY1155 12th Street 03ELL 0522071678 29 04TestingSmith,Paul071678 05Smith, Jane 445978N 05Smith, Julie 445989N 05Smith, Jenny 445915N 01Site2 12346 0000098766 N 02MN615 Woodland Ct 04InfoJones,Chris 012001 01Site3 12347 0000098767 Y 02IN89 Jade Street 03OWB 6429051282 25 04Screen New,Katie 879500
As you can see, each entry could have any number of records and multiples of some of the record types, with one exception, every entry must have a "01" record and can only have one "01" record. Oh, and each record has a length of 400.
I need to get this information into a SQL 2005 database so I can create a front end for accessing the data. Originally, I wanted one line for each account and have null values listed for entries that don't have a specific record. Now that I've looked at the data again, that doesn't look like a good idea. I think a better way to do it would be to create 5 different tables, one for each record type. However, records 2 through 5 don't have anything I can make a primary key. So here are my questions...
Is it possible to make 5 tables from this one file, one table for each of the record types?
If so, can I copy the Account number in record 01, position 13-19 in each of the subsequent record types (that way I could link the tables as needed)?
Can this be done using the SISS Import and Export Wizard to create the package? If not, I'm going to need some very basic step by step instructions on how to create the package.
Is SISS the best way to do this conversion or is there another program that would be better to use?
I know this is a huge question and I appreciate the help of anyone who boldly decides to help me! Thank you in advance and I welcome anyone's suggestions!
How can I take this example Flat file and parse out each section to a new flat file? Each section starts with HD (header row)
http://www.webfound.net/flat_file_example.txt
e.g. an example output file based on above (cutting out the first section) would be:
http://www.webfound.net/flatfile_output.txt
Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed. I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible? The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:
1) output each group (broken by each header row) into it's own txt file
2) use a field in the header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt. I want to grab the text 'AR10' and use that as part of the filename that I create
Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?
I need to write a process to get file size in kb and record count in a file. I was planning on writing a c# console app that takes the file path and name as a param however should i use a CLR?
I cant put a script in the ssis when it's bringing the file down because it has been deemed that we only use ssis for file consumption.
Hi,I am trying to use BULK INSERT with format file. All of our data hasfew bytes of header in the data file which I would like to skip beforedoing BULK INSERT.Is it possible to write format file to skip these few bytes ofheader before doing BULK INSERT? For example, I have a 1 GB data filewith 1000 byte header. Except for first 1000 bytes, rest of the data isgood for BULK INSERT.Thanks in advance. Sorry if it is really a dumb question as I am newto BULK INSERT and practicing still.Bob
View 7 Replies View RelatedI have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
View 5 Replies View RelatedNeed to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
@[User::Output_Path] + "Comms_File"+ @[User:: FileNumber] +"_" + replace((DT_WSTR, 10) (DT_DBDATE) GETDATE(),"-","")+ ".txt"
All this successfully creates these 4 files:
Comms_File_1_20150724.txt, Comms_File_2_20150724.txt, Comms_File_3_20150724.txt, Comms_File_4_20150724.txt
Now the QUESTION is how do I get these filenames as I need to insert them into a DB Audittable. The audit table looks like this:
CREATE TABLE dbo.MMMAudit
(
AuditID INT IDENTITY(1, 1) NOT NULL,
PackageName VARCHAR(100) NULL,
FileName VARCHAR(100) NULL,
LoadTime DATETIME NULL,
NumberofRecords INT NULL
)
To save the Filename & how many records in each file in our Audit Table, am using an Execute SQL Task and configuring it as this:
Execute SQL Task
Parameter mapping - Mapped the User Variable (RecordsInserted) and System Variable( PackageName) to Insert statement as shown below
SQLStatement: INSERT INTO [dbo].[MMMAudit] (
PackageName,NumerofRecords,LoadTime)
(?,?.GETDATE)
Again this all works terrific & populates the dbo.MMMAudit table as shown below BUT I also need to insert the respsctive file name – How do I do that?
AuditID PackageName FileName NumberOfRecords
1 MMM NULL 12
2 MMM NULL 23
3 MMM NULL 14
4 MMM NULL 1
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
[code]....
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
What is the easiest way to accomplish this task with SSIS?
Basically I have a stored procedure that unions multiple queries between databases. I need to be able to export this to a text file on a daily basis and add a total records: row to the end of the text file.
Thanks in advance for any help.
Hello Experts,
I am createing one task (user control) in SSIS. I have property grid in my GUI and 2 buttons (OK & Cancle).
PropertyGrid has Properties like SourceConnection, OutputConnection etc....right now I am able to populate Connections in list box next to Source and Output Property.
Now my question to you guys is depending on Source Connection it should read that text file associated with connection manager. After validation it should pick header (first line of text file bases on record type) and write it into new file when task is executed. I have following code for your reference. Please let me know I am going in right direction or not..
What should go here ?
->Under Class A
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser, IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
{
//Some code to read file and write it into new file
return DTSExecResult.Success;
}
public const string Property_Task = "CustomErrorControl";
public const string Property_SourceConnection = "SourceConnection";
public void LoadFromXML(XmlElement node, IDTSInfoEvents infoEvents)
{
if (node.Name != Property_Task)
{
throw new Exception(String.Format("Invalid task element '{0}' in LoadFromXML.", node.Name));
}
else
{
try
{
_sourceConnectionId = node.Attributes.GetNamedItem(Property_SourceConnection).Value;
}
catch (Exception ex)
{
infoEvents.FireError(0, "LoadFromXML", ex.Message, "", 0);
}
}
}
public void SaveToXML(XmlDocument doc, IDTSInfoEvents infoEvents)
{
try
{
// // Create Task Element
XmlElement taskElement = doc.CreateElement("", Property_Task, "");
doc.AppendChild(taskElement);
// // Save source FileConnection
XmlAttribute sourcefileAttribute = doc.CreateAttribute(Property_SourceConnection);
sourcefileAttribute.Value = _sourceConnectionId;
taskElement.Attributes.Append(sourcefileAttribute);
}
catch (Exception ex)
{
infoEvents.FireError(0, "SaveXML", ex.Message, "", 0);
}
}
In UI Class there is OK Click event.
private void btnOK_Click(object sender, EventArgs e)
{
try
{
_taskHost.Properties[CustomErrorControl.Property_SourceConnection].SetValue(_taskHost, propertyGrid1.Text);
btnOK.DialogResult = DialogResult.OK;
}
catch (Exception ex)
{
Console.WriteLine(ex);
}
#endregion
}
Hi all,
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
Any suggestion or help would be welcome.
Rdgs
David
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Nothing is wrong with package.
Here's a really annoying problem. Let's say you have a text file with 2 million rows.Delimiters all look good and rows are previewed well but the file has a missing row at say lin 1234567 - way deep in the file. When SSIS encounters the blank row, an error is raised and processing on the file STOPS! I verified this in by checking the SSIS log and have even developed an error routine to notify me via email when the error occurs (really cool if I do say so myself ). The main problem still remains - how to resume processing from the point of failure in the file? Any help is appreciated. Thanks.
View 13 Replies View RelatedHow do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
Hi,
I have a flat file, comma-delimited, with strings in double-quotes.
In the connection manager for the file, I have specified that the Text Qualifier = ""
However, in the preview tab, it still shows the strings as surrounded by the quotes, e.g. "mycol1" whereas it should show mycol1 without the quotes.
Next, when I examine the data in the database after the load, it's messed up there also.
"mycol1" ends up in the database as "mycol1
"mycol2" ends up as "mycol2
This is not right.
I have format set to delimited, header row delimiter crlf, etc.
Any ideas?
Thanks
Hi,
I have a package A which is copied from another existing package B as most of the data structure and ETL mappings are same.
What I need to change in Package A is to change the file in Flat File Connection Manager. I can change it in the conneciton manager editor. However, it is automatically changed back to the previous one everytime when I try to Save All or run the package.
I also tried to copy/paste this Flat File Connection Manager in the same package but samething happen. The package file is not set 'Read Only" so anything else can Saved well except for the File name in connection manager.
Is this a bug? It would be very appreciated if anyone can give me any idea about this.
Thanks,
Jenny
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
Just like in DTS where we can add error file so that if the DTS package fails we can see what caused the DTS to fail, likewise do we have anything like error logging file in SSIS. I greatly appreciate your help on this. thanks!!
View 1 Replies View RelatedAfter logging is configured in SSIS package, it seems that after each execution the output is appended to the log file (we are talking about log provider for text files in this case). As a result the file just keeps on growing. I would like to overwrite old information with each run, but I can't find where to configure this. Anybody knows?
Thank you!
Hello all,
I have a big stored procedure which is going to alter many tables,insert data, basically lot of changes.
So, i want to have a text file (or) any log file which will display, what all the changes does the stored procedure has done ( They dont want profiler output )
Can anybody know how to log the results of execution of stored procedure to a text file.
Thanks.
Is there any real purpose to the File Connection Manager? Not the Flat File Connection Manager, just the plain old File Connection Manager.
I have one in my SSIS package because I thought it might make writing to a file easier. But from what I can tell, it doesn't really do much. I have to pull the file name from the connection manager and basically open and manage the file myself in my scripts.
I went this route because I have two scripts that write to the file in turn... one writing out parent records and the other inserting the child records after each parent.
The script looks like this:
Code Block
Dim outFile As String
outFile = Dts.Connections("TestFile.LDIF").AcquireConnection(Dts.Transaction).ToString()
Dim sw As New StreamWriter(outFile, True)
sw.WriteLine()
sw.WriteLine("dn: " & Dts.Variables("GroupID").Value.ToString())
sw.WriteLine("changeType: add")
sw.Close()
I have to close the connection every time because the other script uses the file. It seems that this is quite inefficient. Am I using the File Connection Manager incorrectly? What's a more appropriate way to do this?
I could open the file in a different script and store the StreamWriter object in a global variable, I suppose...
Thoughts, suggestions?
Thanks.
J