I am new to BIZTALK 2006; Please help me get started as below>>
I have XML Request (send) and XML Response (receive) data;
What are the steps needed for this to be accomplished in BizTalk to create webservice for this?
THX
Hi,I am trying to write a method which needs to call a stored procedure and then needs to get the response of the stored procedure back to the variable i declared in the method. private string GetFromCode(string strWebVersionFromCode, string strWebVersionString) { //call stored procedure } strWebVersionFromCode = GetFromCode(strFromCode, "web_version"); // is the var which will store the response.how should I do this?Please assist.
View 3 Replies View RelatedHi all -
We are planning to use a 2-node SQL Server 2005 cluster as part of a new Biztalk 2006 project, and I would like some advice regarding SQL Server service packs and editions.
Testing has already been running for some time without problems, but the test environment (a) is not clustered, (b) is using SQL Server 2005 Standard Edition rather than Enterprise and (c) has neither of the SQL Server service packs installed.
As this is a major project for us, my instinct would be to use Enterprise Edition (maximise performance and scalability)
and to apply SP2 (because I thought it was best practice to be up-to-date). I would have liked to do this before we go Live so we don't run the risk of having to change afterwards if we hit a problem.
Understandably, the project guys' perspective is this: testing so far has not been affected by SQL Server bugs, and we should go Live with the environment we have tested in, albeit with the planned 2-node cluster which is seen as a 'must have'.
I have trawled Books Online, Technet and other resources without success, so any thoughts or info on required, recommended or preferred combinations of Biztalk 2006 with SQL Server 2005 editions and service packs in a clustered
environment would be greatly appreciated - thanks!
Michael
hi alli have a web application on a web server.and another windows application on another computer.there are databases on each of them.how can i send and receive data between these two applications?please reply me as soon as possibleregards
View 5 Replies View RelatedHi,
I have a problem using service broker, a send the message from server SSB1(initiator) and a receive this message on server SSB2(target), but I don't receive response to SSB1...
In my server SSB2 has this messages on Profiler:
- This message could not be delivered because it is a duplicate.
- Could not forward the message because forwarding is disabled in this SQL Server instance.
- The message could not be delivered because it could not be classified. Enable broker message classification trace to see the reason for the failure.
Message from SSB1 Profiler:
- This message was dropped because it could not be dispatched on time. State: 1
And the messages not end in both servers
Tks
Fernando Bueno
Hello,
I am trying to complete the BOL sample "Creating a Mobile Application with SQL Server Mobile". Using SQL 2k5 and VS Team Suite. I have the emulator about to get on to the internet and can even get to the http://sqlce.domain.com/sqlmobile/sqlcesa30.dll url but when runing the vb.net code I get the error 28037 "A request to send data to the computer running IIS has failed. For more information, see HRESULT.". Any help would be greatly appreciated. No software firewalls are running. I have a dns entry that points to my laptop for testing. The sync function code is below.
Sub sync()
Dim repl As New SqlCeReplication()
repl.InternetUrl = "http://sqlce.domain.com/SQLMobile/sqlcesa30.dll"
repl.Publisher = "MY-LAPTOPDBSERVER"
repl.PublisherDatabase = "SQLMobile"
repl.PublisherSecurityMode = SecurityType.NTAuthentication
repl.Publication = "SQLMobile"
repl.Subscriber = "SQLMobile"
repl.SubscriberConnectionString = "Data Source='" + filename + "';Max Database Size=128;Default Lock Escalation =100;"
Try
repl.AddSubscription(AddOption.CreateDatabase)
repl.Synchronize()
Catch err As SqlCeException
MessageBox.Show(err.ToString)
End Try
End Sub
http://sqlce.domain.com/sqlmobile/sqlcesa30.dll?diag
SQL Server Mobile Server Agent Diagnostics
2006/04/04 15:28:51
General Information
Item
Value
Server Name
sqlce.domain.com
URL
/SQLMobile/sqlcesa30.dll
Authentication Type
Anonymous
Server Port
80
HTTPS
off
Server Software
Microsoft-IIS/5.1
Replication
Allowed
RDA
Allowed
Logging Level
1
Impersonation and Access Tests
Action
Status
ErrorCode
Impersonate User
SUCCESS
0x0
ReadWriteDeleteMessageFile
SUCCESS
0x0
SQL Server Mobile Modules Test
Module
Status
ErrorCode
Version
SQLCERP30.DLL
SUCCESS
0x0
3.0.5207.0
SQLCESA30.DLL
SUCCESS
0x0
3.0.5207.0
Reconciler Test
Reconciler
Status
ErrorCode
9.0 Database Reconciler
SUCCESS
0x0
8.0 Database Reconciler
SUCCESS
0x0
SQL Server Module Versions
Module
Version
sqloledb.dll
2000.85.1117.0
9.0 replrec.dll
2005.90.1399.0
9.0 replprov.dll
2005.90.1399.0
9.0 msgprox.dll
2005.90.1399.0
8.0 replrec.dll
2000.80.2039.0
8.0 replprov.dll
2000.80.2039.0
8.0 msgprox.dll
2000.80.2039.0
We have developed a Winmobile 5.0 application using VS2005 and Sql 2005 CE. We have successfuly installed the Server Agent on the web server and using the url 'http://websitename/rdatest/sqlcesa30.dll' have received an acknowledgement from the server agent. When we set up the Web Syncronization Wizard we kept things simple and opted for anonymous access. However, our Sql 2005 is based on a separate dedicated server which can be accessed by the web server. Our website, also written in VS2005, uses the following connection string to access the Sql 2005 database for our website.
"server=172.18.22.222; database=Audit; uid=steve; pwd=letmein"
When using the following code in our PDA application we have tried the above string as well as another interpretation with the same resulting error 'A request to send data to the computer running IIS has failed, for more information please see HResult'. The code we are using is..
Using rda As New SqlCeRemoteDataAccess()
Dim sCon As String = "Provider=SQLOLEDB;Data Source=172.18.22.222; Initial Catalog=Audit ; UserID=steve; Password=letmein"
Dim sCon As String = "server=172.18.22.222; database=Audit; uid=steve; pwd=letmein"
rda.InternetUrl = "http://websitename/rdatest/sqlcesa30.dll"
rda.LocalConnectionString = "Data Source=Program FilesTestSysTestdata.sdf"
Try
rda.Pull("Detail", "SELECT Details, Actions FROM Detail", sCon, RdaTrackOption.TrackingOff, "DtlErrors")
Catch sqlCeEx As SqlCeException
RecError( sqlCeEx.ToString)
End Try
End Using
Having tried both connection strings we feel the error is caused by something else possibly on our dedicated Sql server. Would really appreciate any help.
Hi,
I Have an application for Pocket PC 2003 developed in Visual Studio 2003(VB.Net , Smart Device App). I Use Sql Server CE as the database which Synchronizes with Sql Server 2000, SP4. The IIS and the Sql Server 2000 are in different Machines. I Have Installed the proper Sqlserver Ce in the IIS machine and created virtual directory with Basic authentication.I connect my device through Active Sync 3.7. I could browse the sscesa20.dll from Pocket IE and get the ' SQL Server CE Server Agent ' message. The PC to which my pocket PC is connected is under a Proxy.
When I tried the RDA.Pull() , the function fails and returns the error
" Error Code: 80072EE7
A request to send data to the computer running IIS has failed. For more information see HRESULT. [,,,,,]
Minor Error : 28037
Source: Sql Server 2000 Windows CE Edition. "
The same application works in other network which is not under a proxy.
Any clues ?
Thanks,
Jibu
eSystem Software
Hi guys,
View 4 Replies View RelatedHi,
My application is working under InternetUrl "http://servername/test/sqlcesa30.dll", but I am getting following error for "https://servername/test/sqlcesa30.dll"
"A request to send data to the computer running IIS has failed. For more information, see HRESULT."
We have proxy server top of the web server and certificate is installed on proxy server. There is no ceritificate installed on web server which is behind the firewall. Proxy server divert the request on different protocol based on "http" and "https" request and send to web server which is behind the firewall. I am not getting any error when i use RDA using http for above environment, but when i use RDA using https I am getting an above error for the same environment.
Can anyone help me to resolve this issue?
Thanks in advance
I have 2 pages. ( i want to pass information from a text box to the "certificate.aspx" database query)
page 1 certsearch.aspx
this is my script i have a label, commnad button, & textbox
If txtSearchCert.Text = "" Then
lblMsg.Text = "Please enter a certificate #"
Else
Response.Redirect("certificate.aspx" & txtSearchCert.Text)
End If
page 2 certificate.aspx
i am not sure what goes here.this is what i am trying
Request.QueryString = (txtSearchCert.text)
This is my database query on certificate.aspx page
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:imacsConn %>"
SelectCommand="SELECT * FROM [SummaryBlue] WHERE REPORTNUMBER = ?"></asp:SqlDataSource>
Hi,
I've a xml file which I need to send over http to another server. The other server processes xml file and sends back xml response over http.
How can this be achieved in SSIS.
Thanks
Manish
Hi,
I've a xml file which I need to send over http to another server. The other server processes xml file and sends back xml response over http.
How can this be achieved in SSIS.
Thanks
Manish
Hi,
I am stuck with a design related issue in SSIS.
Any help would be greatly appreciated.
We do have a HTTP Connection object in SSIS. This implies that we may also be able to use some task to send a web request and receive a web response from a remote server. Can we use any tasks in SSIS to send/receive web requests.
I am aware that we could write code in the Script task to send the web request and receive the response. With the script task, i have another issue. I must refer to a DLL through the code and I am not sure how to use a referenced DLL in the script task.
Once again, thanks in advance for your help.
I have smilar kind of an issue with replication. I had sucessfully done replication with Sqlce2.0 on sql server 2000. In development machine I had VS 2003, sqlce development tools.
Now I use the same code done in VS 2003 into VS2005, it sucessfully converted the code.
In server machine (win 2003) I installed sql server 2000, sql server 2000 service pack 4, SP4 merge replication components, sql server 2005 mobile server tools and .Net framework 2.0. Created pubication sucessfuly. In this machine I configured IIS as per the web synchronization wizard. Gave anyonymous permissions. Virual direcory is created sucessfully. I tested the server agent in IE http://myservername/aliasname/sqlcesa30.dll.
SQL Server Mobile Server Agent 3.0 is shown
My application opened successfuly in windows mobile 5.0 Pocket PC emulator. When try to sync its dislays error "A request to send data to the computer running IIS is failed, see Hrresult"
No firewall in both development and server machines.
The same code works if its sqlce20 perfectly with vs2003 code. Not in this
Can anyone tell me whats wrong in this?
Regards
Arif
How can I have my email download automatically instead of clicking send/receive all the time?
View 1 Replies View RelatedI understand that SQL Service Broker will RECEIVE messages in the same order of SEND, so long as the messages are on the same conversation.
I would like to accomplish queue-level ordering instead of (or in addition to) conversation-level ordering.
There is a significant business case for this level of ordering. Consider an order processing system which is specified to fulfill orders in the sequence they are received. The reason for the ordering is as follows. Suppose the process(es) that RECEIVEs from the queue is down for several hours and the messages back up in the queue. Various customers place orders throughout this period of time. If more orders are placed than there are quantity for an item, the customers who placed their orders earliest in the day ought to be the ones that receive the merchandise and the later orders should be placed on backorder.
Limited experimentation showed that SQL Server totally disregards the order in which the messages were sent (on different conversations to the same queue).
The potential solution to use the same conversation has some drawbacks:
1. Difficult to do error handling because of the way error handling works in conversations.
2. It is not possible to RECEIVE using multiple threads. (Yes, RECEIVEing on multiple threads also would reorder the messages, but the reorderings would be localized in time so this would be tolerable by a lot of applications. In other words, orders from 1:00 AM would not be mixed with orders from 9:00 AM.)
Can anyone see a good solution to this in the current version?
If there are no good solutions, it would be great if Microsoft considers adding a feature where you can declare an ordering requirement when you CREATE QUEUE. Even support for an "approximate" ordering (messages can rearrange +/- several seconds) would be helpful, but the current way which seems to totally randomize the message order is not good for certain kinds of significant applications.
Hi All,I have to write a stored procedure which will send/Receive text filefrom/to a server by using FTP.Is anybody have done anything on it? or know about it.If yes, I would like to know about it. (also provide the storedprocedure code if possible)Thanks in Adv.T.S.Negi
View 3 Replies View RelatedHi,
I am new to SSIS. I need to read the files in a remote server folder and ftp them to the other remote server folder.
I know , I have to set up FTP task and FTP task must use a variable to provide the path information. But I am not sure how I can do this. Anyone suggest me with the script task to populate the variable and steps involved in this.
Thanks,
Gish
I have Lotus Notes Database which stores employee database. If I request following http URL on browser, which fetch data from Lotus Notes Database and response me following XML text. I need to pass some id as a parameter in HTTP request to retrieve particular data.
HTTP Request:
http://kernel.com/global/corp/ecd.nsf/xmlemployeesactivebyguid?readviewentries&StartKey=sesa249&count=1
HTTP Response:
<?xml version="1.0" encoding="UTF-8" ?>
<viewentries toplevelentries="53656">
<viewentry position="14310" unid="FC86BCB9224169F4C12570AD005A775C" noteid="D9FA2" siblings="53656">
<entrydata columnnumber="0" name="GUID">
<text>SESA24941</text>
</entrydata>
</viewentry>
</viewentries>
I need to send this http request programmatically. To do that,
1) Is thr any functionality in SQL Server 2005, which can send http request to any other server like LOTUS NOTES
2) If not,thn do you know how to do it programmatically using c# ?
When U have some time, let me know. Thanks in advance man.
Satyam
I am tring to use a stored procedure to run a function POST some data through HTTP, but failed. Here are the codes I used. Would appreciate if anyone can help me about that. Thank you very much.
Database Stored Procedure:
CREATE PROCEDURE [dbo].[USP_HTTP_POST]
@URL NCHAR(255),
@CONTENT NCHAR(1024),
@Result bit OUTPUT
AS
BEGIN
/***** Call Function to POST *****/
set @Result = NULL
EXECUTE @Result = [dbo].[udfHttpPost]
@URL,
@Content
END
Database Function:
CREATE FUNCTION [dbo].[udfHttpPost]
(@Url [nchar](255),
@Content [nchar](1024))
RETURNS [bit] WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [SqlServices].[SqlServices.HttpServices].[HttpPost]
VC# Assembly Code
using System;
using System.Configuration;
using System.Collections.Generic;
using System.Text;
using System.Net;
using System.Security;
using System.Security.Permissions;
using System.IO;
using Microsoft.SqlServer.Server;
namespace SqlServices
{
public class HttpServices
{
[SqlFunction(DataAccess = DataAccessKind.None)]
public static bool HttpPost(string Url, string Content)
{
Url = Url.TrimEnd();
Content = Content.TrimEnd();
string rawOutput = "";
//Get Access Right to Web
WebPermission p = new WebPermission(NetworkAccess.Connect,Url);
p.Assert();
//Prepare the WebRequest
WebRequest Req = (WebRequest)WebRequest.Create(Url);
Req.Timeout = 60000;
Req.Method = "POST";
Req.ContentLength = Content.Length;
Req.ContentType = "application/x-www-form-urlencoded";
StreamWriter PostWriter = new StreamWriter(Req.GetRequestStream());
PostWriter.Write(Content);
PostWriter.Close();
WebResponse Resp = Req.GetResponse();
StreamReader sr = new StreamReader(Resp.GetResponseStream());
rawOutput = sr.ReadToEnd();
sr.Close();
return true;
}
}
}
System Exception:
A .NET Framework error occurred during execution of user defined routine or aggregate 'udfHttpPost':
System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
System.Security.SecurityException:
at System.Security.CodeAccessSecurityEngine.CheckNReturnSO(PermissionToken permToken, CodeAccessPermission demand, StackCrawlMark& stackMark, Int32 unrestrictedOverride, Int32 create)
at System.Security.CodeAccessSecurityEngine.Assert(CodeAccessPermission cap, StackCrawlMark& stackMark)
at System.Security.CodeAccessPermission.Assert()
at SqlServices.HttpServices.HttpPost(String Url, String Content)
Hi All,
I looked around the Microsoft web sites but could not find anything on how to submit an enhancement request for Microsoft Reporting Services. I would like to request the ability to prevent exporting of a report without having to disable exports for all reports on the reporting server. In other words I would like certain reports to be exportable but others not.
Thanks,
in footer of my report i show a current date by this
=Format(Today(), "d")
as a result i gave those
3/21/2007
but wont date like this 03/21/2007
How ?
Hello ...
Using Ent. Library Jan. 2006 release and .Net Framework 2.0, I'm connecting to SQL Server 2000 using Microsoft.Practices.EnterpriseLibrary.Data.Sql.
I have a windows service that processes jobs asynchronously and from time to time, I'm getting the following error --
"A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (TCP Provider error: 0 - An existing connection was forcibly closed by the remote host. "
What's surprising is the error message saying SQL Server 2005. Has anyone encountered and resolved this?
Thanks.
allanroy
in the class library i written the code name :customer is the lib name
using System;
using System.Collections.Generic;
using System.Text;
namespace Customer
{ class Entites
{
public int inTest;
public int inTest2;
}
}
Now in the Class1.cs i written the code
i am getting the data from the database by using enterprise lib 2006 connection function
now HOW TO BIND THE DATA TO LIST AND RETURN TYPE IS LIST
PLEASE CHECK THE CODE AND REDEFINE THE CODE
using System;
using System.Data ;
using System.Collections.Generic;
using System.Collections.Generic;
using System.Text;
using Microsoft.Practices.EnterpriseLibrary.Data;
using Microsoft.Practices.EnterpriseLibrary.ExceptionHandling;
using Microsoft.Practices.EnterpriseLibrary.Common.Configuration;
using System.Collections;
using System.Xml.Serialization;
using System.Data.Common;
using Customer;
namespace Customer
{
class Class1
{
public List<Entites> getdata(int id)
{
Database db = DatabaseFactory.CreateDatabase("mycon");
System.Data.Common.DbCommand cmd ;
cmd = db.GetStoredProcCommand("GET_CUSTOMER");
cmd.CommandType = CommandType.StoredProcedure;
db.AddInParameter(cmd,"@CID",System.Data.DbType.Int32,id);
List<Entites> objEntites = new List<Entites>();
using (IDataReader dr = db.ExecuteReader(cmd))
foreach (Entites obj in dr)
{
objEntites.inTest = obj.inTest;-----------------------------------------------ERROR LINE
// objEntites.Add(obj);
}
return objEntites;
}
}
}
Error 2 foreach statement cannot operate on variables of type 'System.Data.IDataReader' because 'System.Data.IDataReader' does not contain a public definition for 'GetEnumerator' D:KOTI_PRJSEnterpriseCustomerClass1.cs 34 13 Customer
I am running the Office Professional Plus 2007 RTM with all options enabled and SQL 2005 Enterprise Edition. Based on the system requirements listed on the download page for the Office 2007 Data Mining Add-In, I've also verified that I have the correct CTP of SQL 2005 SP2 and that .Net 2.0 Framework is installed. Finally, I've verified that my local instance of SQL Server is configured correctly to allow temporary data mining models.
In Excel, all of the Table Analysis tools seem to work fine, and most of the options on the Data Mining ribbon also work; however, all of the options under "Data Modeling" on the Data Mining ribbon return the following error when I try to use them:
"Could not load file or assembly 'Microsoft.DataWarehouse, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependents. The system cannot find the file specified."
Please help. Thanks.
Hai ,I created a table with primary key clustered. I have entered the datathru E.Manager . If a close the table and open it again , Ii shows therows with the (default) ascending order. Is, there any way to get therows in the user entered order(neither asc or dec order)With ThanksRaghu
View 2 Replies View RelatedI get this error message when I try to connect to Reporting Services via the Management Studio.
I can see my machine listed in the Server Name > Browse For More > Local Servers dialogue. But no luck,
Ive tried:
Servername: localhost
Servername: DED1774 (the machine name)
Servername: localhost/reportserver
Servername: DED1774/reportserver
Servername: http://ded1774/reportserver (from the rsreportserver.config file
<UrlRoot>http://ded1774/reportserver</UrlRoot>)
I've Googled the error message and found postings for solutions, but none of these helped. Can anyone suggest some simple steps I can take to try to find the issue and get the connection working?
Thanks
What are the specific types of scenarios where we could use SSB and BizTalk in tandem?
I have come across a gotdotnet sample of an SSB adapter for BizTalk. As i understand a Biztalk orchestration could be an end point for the SSB conversation.
But what advantages can be obtained using this as compared to a typical SQL adapter for BizTalk which does CRUD operations on DB.
any pointers in this directions would be helpful
TIA
Paritosh
Hello! Anybody know if can I use (and
how can I use) PMML with the rule engine of Biztalk Server, or if there
is some module that translate PMML format to Biztalk. Sorry by my
english.
I have a table (Tickdata; Contract,Price,Timecreated) which storesTimecreated as datetime. I need to request the maximum price where theTimecreated is greater than some value, in this case 9/13/2004 3:09:29 PM.How exactly do I get data from a specified time?Thanks
View 2 Replies View RelatedHello,
At our company we are considering building an architecture for file
imports and processing and considering both Biztalk and SSIS at this
time.
My understanding from reading the material out there regarding this
subject that Biztalk is more suited for integrating applications and
real time communication of information and SSIS is more suited for
bulk loads into databases/data warehouses and data manipulation.
Currently we are somewhat along the lines described above, but there
is a desire to use one technology over the other for importing files
and data manipulation, and I am not sure that is practical. Also
there is a debate currently as to whether Biztalk does better at
handling logic than SSIS.
I have read through the article on microsoft site that outlines the
above - http://www.microsoft.com/technet/prodtechnol/biztalk/2004/whitepapers...
However, I would like to get some input from people who have actually
used both these tools in the real world for ETL process and could
provide some insight so as to help us make an informed decision.
Thanks
KR
Hi,
I have installed SQLSERVER 2005 in Windows 2003 Server with mixed mode authentication.
Now I am unable to connect it from my windows Xp client system. When I specify the credentials the following error msg displays
"Specified Database cannot be reached Incorrect Server name or login. User may not be associated with trusted sqlserver connection"
My Server Config as follows
servername :vijay
login details:
sa;sa
In Biztalk server 2006, Cofiguration wizard I gave server name as "vijay"
and
username : sa ; pwd : sa;
Kindly help me in getting it right.
Thanks
Vijay