XML Source And Remove Column Warnings

Dec 19, 2007



Hello,

I am creating a 2005 SSIS Package with multiple data flows with source data based on the XML Source and a XSD Schema that we have created. These data flows load data from XML into different tables in our data warehouse for order data so the XSD Schema has several hierarchies. Because each data flow loads data into one table (I broke it out this way to make the package easier for readability and maintance) and the source for each is based on the XSD hierarchies I receive numerous warnings similar to the following; "Warning: 0x80047076....Removing this unused output column can increase Data Flow task performance." that I would like to remove. However, when I un-check the box to remove those output columns (which leaves several hierarchies without output columns) I then receive a error similar to the following; "Error: 0xC00470B9 at ....contains no output columns. An asynchronous output must contain output columns."

So the question is how to remove the numerous remove column warnings? I have thought about creating one XML schema for each dataflow, breaking the data flows into different packages, etc. but I am still not exaclty sure how to remove the warnings which should increase the speed of the package overall. Thank you!

View 6 Replies


ADVERTISEMENT

How To Remove Warnings???

May 8, 2008



I have so many warnings in the package which i create and to open a package to takes a very long time..

How do i get rid of the warnings

Warning 2 Validation warning. Tablw1: OLE DB Destination 8 [61186]: Truncation may occur due to inserting data from data flow column "MEMNO" with a length of 255 to database column "MEMNO" with a length of 50. Membership 90-98 Access 2000.dtsx 0 0


In the final oledb dectination of the package i dont connect the error output to error table because they don't have errors

How to proceed with it???

View 1 Replies View Related

Dealing With Truncation Warnings (Excel Source)

Oct 30, 2006

Hi,

Is there a way of stopping truncation warnings due to the fact the the XL driver assumings BSTR(255) columns. I'm loading data from excel to SQL Server, the SQL Server columns are nvarchar(50) but the Excel source has assumed 255.

I can change the Excel Source using the 'Advanced Editor' and change the meta-data of the 'Output Column', but then there's a mismatch between the External Column and Output Column collection - so a warning is displayed.

The External Column meta-data can be changed, but then it's out of sync with the 'Error Output' meta-data (and the Error Output meta-data is read only).

I'm sure I've missed a step, can anyone enlighten me

Dave

View 6 Replies View Related

Adding An Identity Column With Out Warnings

Jan 25, 2006

Rao Aregaddan writes "Hi All,

Here is my Query.....

While executing the following code,it is showing some warnings.

SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
SET ANSI_WARNINGS ON
GO
Drop procedure [DBO].[Usp_Extract_OLAP_Data_1]
GO

Create Procedure [DBO].[Usp_Extract_OLAP_Data_1] as

begin

IF EXISTS (SELECT * FROM DBO.SYSOBJECTS WHERE ID = OBJECT_ID('[DBO].[processed_olap_data_1]') AND OBJECTPROPERTY(ID, N'ISUSERTABLE') = 1)
DROP TABLE [DBO].[processed_olap_data_1]
select * into dbo.processed_olap_data_1 from pubs.dbo.processed_olap_data_1
EXEC ('ALTER TABLE dbo.processed_olap_data_1 ADD generatedid INT IDENTITY')

select * from processed_olap_data_1 order by generatedid

END

GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS OFF
GO
SET ANSI_WARNINGS OFF
GO

Out Put is as follows
----------------------

(141 row(s) affected)


(141 row(s) affected)

Warning: The table 'processed_olap_data_1' has been created but its maximum row size (3873071) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes.

(141 row(s) affected)


Please guide me on this issue that why iam getting this warning even i set the ansi null and ansi warnings off.
one more thing is that is there any other way to add an
identity column with out using alter statement.and is there any problem with front end guys if it shows like this warnings..."

View 3 Replies View Related

How To Remove {CR}{LF} And Tab {t} Characters From Source Data?

Nov 7, 2006

I have built a SSIS package that reads in data from a SQL Server 2005 source database into a flat file destination. The Row Delimiter is {CR}{LF}. The Column Delimiter is Tab {t}.

The data being read from the SQL Server database contains both {CR}{LF} and Tab {t} characters in various fields on several rows.

How can I process the input data from the SQL Server to remove these characters before passing it to the destination output file?

Sorry if this is obvious to all, but I am only just starting with SSIS...

Many thanks

Adrian

View 1 Replies View Related

OLE DB Source To Flat File Destintation Using Fixed Width Columns - Determining Source Column Width

Feb 13, 2007

Hi,

I am trying to create a program that transfers tables to flat files.
At this point in time, I have suceeded in created one that creates delimited files.

However, I am now trying to create fixed-width files as you can do with the SSIS designer, but programatically.

Is there a way to programatically determine the width of a column from the source table? I can not seem to find any kind of function or member that stores this information or allows me to retrieve it.

I know what I need to change in order to set a width for a column, but I just don't know how to find the width without just asking the user to provide one.

View 5 Replies View Related

Derived Column Usage When Column Does Not Exist In Source (but Exists In Destination)

Sep 11, 2007





Posted - 09/10/2007 : 15:53:26



Hey all - got a problem that seems like it would be simple (and probably is : )

I'm importing a csv file into a SQL 2005 table and would like to add 2 columns that exist in the table but not in the csv file. I need these 2 columns to contain the current month and year (columns are named CM and CY respectively). How do I go about adding this data to each row during the transformation? A derived column task? Script task? None of these seem to be able to do this for me.

Here's a portion of the transformation script I was using to accomplish this when we were using SQL 2000 DTS jobs:


'**********************************************************************
' Visual Basic Transformation Script
'************************************************************************

' Copy each source column to the destination column
Function Main()
DTSDestination("CM") = Month(Now)
DTSDestination("CY") = Year(Now)
DTSDestination("Comments") = DTSSource("Col031")
DTSDestination("Manufacturer") = DTSSource("Col030")
DTSDestination("Model") = DTSSource("Col029")
DTSDestination("Last Check-in Date") = DTSSource("Col028")
Main = DTSTransformStat_OK
End Function
***********************************************************
Hopefully this question isnt answered somewhere else, but I did a quick search and came up with nothing. I've actually tried to utilize the script component and the "Row" object, but the only properties I'm given with that are the ones from the source data.

thanks in advance!

jm

View 1 Replies View Related

How To Remove A Column

Sep 9, 2013

I have this table as below and I want to remove the last column (DESCRIPTION_EXTENDED). It is used in newer version of app but I want to keep the orig. as it was. What is the process to remove this column? I understand to use ALTER and DROP but do I have to something else?

SELECT TOP 1000 [ID]
,[FACILITY_KEY]
,[FIRST_LEVEL_CAT]
,[SECOND_LEVEL_CAT]
,[UNIQUE_KEY]
,[DESCRIPTION]
,[ACTIVE]
,[ORIG_ID]
,[COLOR]
,[PARENT_ID]
,[ADDRESS]
,[PHONE]
,[COMMENTS]
,[DESCRIPTION_EXTENDED]
FROM [DPRO2].[OGEN].[SCH_C_RESOURCES]

View 1 Replies View Related

[Flat File Source [8885]] Error: The Column Data For Column CountryId Overflowed The Disk I/O Buffer.

Jul 31, 2007


Hi everyone,
I am using SSIS, and I got the folowing error, I am loading several CSV files in a OLE DB, Becasuse the file is finishing and the tak dont realize of the anormal termination, making an overflow.
So basically what i want is to control the anormal ending of the csv file.
please can anyone help me ???

I am getting the following error after replacing the '""' with '|'.
The replacng is done becasue some text sting contains "" wherein the DFT was throwing an error as " The column delimiter could not foun".

[Flat File Source [8885]] Error: The column data for column "CountryId" overflowed the disk I/O buffer.
[Flat File Source [8885]] Error: An error occurred while skipping data rows.
[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (8885) returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.

[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.

[DTS.Pipeline] Error: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.

[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0047039.

[DTS.Pipeline] Information: Post Execute phase is beginning.

apprecite for immediate response.

Thanks in advance,
Anand

View 1 Replies View Related

Delete/Remove Column

Oct 18, 2000

Hello people

Can someone tell me if, and then how I can delete/remove a column from a table in SQL6.5. (I know how to add a column)


Regards
De Waal

View 2 Replies View Related

Cannot Remove Matrix Column

Jan 12, 2007

Added a subtotal to matrix column. But really wanted subtotal below the columns. Now that subtotal column is permanent. Cannot find a way to remove it.

View 1 Replies View Related

How To Remove NULL From Computed Column ?

Aug 20, 2004

I've 2 columns after executing query,

one column from those 2 is calculated column.

I am getting resultset as follows



ACCOUNT (calculated column)

------------------------------

100 alpha

100 NULL



My concern is how should I remove record with NULL from final resultset ?

If I give some name to that calculated column say 'Name'

and tried to put in main query as

"where 'Name' IS NOT NULL"; it doesnot work.

Can you have any workaround for it?
:confused:

View 2 Replies View Related

Remove Identify Property From A Column

Mar 1, 2002

Hi, I want to know how to remove identify property from a column without recreating the whole table...
When I do it in Enterprise Manager, it actually drop and recreate the table
in background. I just like to know if there is other way without recreating the tables. Thanks!
Xiao Tan

View 4 Replies View Related

Need Your Help To Remove Spaces In The Column Entries Using SQL

Oct 21, 2006

Hi all,I am new to these so plz never mind if this is funny.here is my problem :Table : moodyColumn : TitleNew column : NospaceI have data in "Title" column of many rows which are normal sentence.My requirment is to remove the "white space", +, | , ., / , ! @, $, %etc special characters and fill it by ( hyphen) and put it in new"Nospace" ColumnExample :I have : Hurray ! I won the GameNeeded : Hurray-I-won-the-GameCan any body helpme in getting an SQL Query for this if possibleThanks in Advance

View 4 Replies View Related

Remove Formatting From Phone Number Column

Jul 9, 2000

I have a column of phone numbers that have formatting such as (xxx)xxx-xxxx,
or xxx.xxx.xxxx or xxx.xxx-xxxx; however, not all phone numbers are formatted in this fashion. I need to remove all characters and only leave behind numeric digits to look like xxxxxxxxxx. I have tried select replace(colname,'-','') from table. This does the trick but does not actually change the values in the column. Any help in accomplishing this would be helpful. Thanks in advance.

Paul

View 1 Replies View Related

SQL 2012 :: Remove Character From Specific Column

Nov 18, 2014

How to remove Character From Column,Just Character. I want to work with number.

View 4 Replies View Related

Remove Double Quotes From Column Data?

Jun 17, 2014

I imported data from flat file to SQL Server database table. After execution one of column got data with double quotes. It look like:

22222.....02/14/2014....."Smith, John"
333........02/14/2014....."Brownies, Alian"

How to remove quotes?

View 3 Replies View Related

Transact SQL :: How To Remove Numbers Zero From The Left Only In Column

Jul 1, 2015

example:

column: ID  numbercar      before         ID    numbercar         after

        1      00122011                      1        122011                                           
       2      00042010                       2         42010
       3      03102012                          3       3102012                                          

View 5 Replies View Related

Transact SQL :: Remove Trailing Spaces From A Column

Aug 31, 2015

The table I have is:

CREATE TABLE [dbo].[FTE2015](
[Firm Number] [varchar](50) NULL,
[w9] [varchar](50) NULL
) ON [PRIMARY]
GO

select * from dbo.FTE2015
Firm Number w9
709485""   0
040898A" 12.5
709502"" 2.4
041382"" 0.4
709503"" 0.3
709681""  4.9

How do I remove the trailing blanks? I tried RTRIM but it does not work.

SELECT RTRIM([Firm Number])
FROM dbo.FTE2015;
(No column name)
709485""
040898A"
709502""
041382""
709503""

How can I resolve this? The [Firm Number]column is not of a fixed length.

View 11 Replies View Related

After Merge Replication - Wanted To Remove Rowguid Column

Jul 28, 2001

Hi all,

After I setup the merge replication in SQL SERVER 7.0, there is a rowguid column (datatype uniqueidentifier) inserted into each table in the both the source and destination database.

I need to get rid of the rowguid column in all tables. I deleted the replication, but the column still existed.

Is there an easy way to get rid of all the rowguid column in the database? Thanks for your reponse in advanced.

View 2 Replies View Related

SQL Server 2012 :: Remove Non Alpha Chars From A Column

Mar 1, 2014

How to remove non alpha chars from a column ?

I googled the following code
Create Function [dbo].[RemoveNonAlphaCharacters](@Temp VarChar(1000))
Returns VarChar(1000)
AS
Begin

[code]....

View 9 Replies View Related

T-SQL (SS2K8) :: Remove Non-numeric Values From A Nvarchar Column

Dec 9, 2014

We have an address table with a house_num field which is a nvarchar.

Most of house numbers are numbers like 1234, 0989

But some of them have a letter behind it like 678 B, 8909 F, even some like this 123/B

We would like to remove any non-numeric letter for this column.

Is there a way to do it?

View 4 Replies View Related

SQL Server 2012 :: Remove CR-LF In Between Column Which Is Text Datatype?

May 1, 2015

I have a column A as 'text' datatype. This has CR-LF in between data.How to remove it.

I am trying to copy result from SQL to Excel

Eg:
A CR LF
ABC CR LF
DVB CR LF

The output should be:

A
ABC DVB

View 2 Replies View Related

T-SQL (SS2K8) :: How To Remove Special Characters From Column Value In A String

May 16, 2015

I want to remove special characters from a string in sql like <?> in a column value in a table.

View 1 Replies View Related

Duplicates Again! UNION Join - Remove Records With Column Diff.

Sep 9, 2004

Hello All,

We all were new at one point.... any help is appreciated.

Objective:

Combining two 49,000 row tables and remove records where there is only 1 column difference. (keeping the specified column value removing the one with a blank.)

Reason:

I have 2 people going through a list, coding a specific column with a single letter value. They both have different progress on each sheet. Hence I am trying to UNION them and have a result of their combined efforts without duplicates.

My progress/where I'm stuck:

Here is my first query/union:

SELECT * FROM [Eds table]
UNION SELECT * FROM [Vickis table];

As shown above, I have unioned these 2 tables and my results removed th obvious whole record duplicates, but since 1 column is different on these, a union without criteria considers them unique.....

an example of duplicates that I must remove are as follows:

142301 - Product 5000 - 150# - S (Keep)
142031 - Product 5000 - 150# - "" <--- Blank (Remove)

I am trying to run another query on my first query results so I don't mess my first query up. Here it is:

SELECT DISTINCT [Prod #], [Prod Name], [Prod Description], [Product Type]
FROM [Combined Tables]
WHERE [Product Type]<>" ";


Please Help! Thank you in advance.

--------------------

5 minutes away from pulling my last one!

BaldNAskewed

View 7 Replies View Related

Remove Invalid Character From TXT File Value In Copy Column Transformation....!

Dec 6, 2007

In DTS/SSIS packages, How do to data validation or check for special characters and remove them at Copy column level.

thanks,

View 3 Replies View Related

Reporting Services :: Remove Duplicates Based On A Specific Column

Jun 22, 2015

I have some duplicate values for my query results, about 200 duplicates out of 30000 rows.  Of these 200 duplicates I want to keep the ones that have a higher value for... 'UpdatedBatchID'. 

SELECT
    IR.Id                            as 'ID'
  , CAST(IR.Priority as varchar)    as 'Priority'
  , IRSupportGroupDN.DisplayName    as 'Support Group'
  , DATEADD(MI,DATEDIFF(mi,GETUTCDATE(),GETDATE()),IR.CreatedDate)    as 'Created Date'
  , DATEADD(MI,DATEDIFF(mi,GETUTCDATE(),GETDATE()),IR.ResolvedDate)    as 'Resolved Date'
  , SLOConfig.DisplayName            as 'SLO'
  , DATEADD(MI,DATEDIFF(mi,GETUTCDATE(),GETDATE()),SLOFact.TargetEndDate)    as 'SLO Target'
  , SLOStatusDN.DisplayName            as 'SLO Status'
  , SLOMetric.DisplayName            as 'SLO Metric'
  , SLOFact.UpdatedBatchId            as 'UpdatedBatchID'

View 11 Replies View Related

Transact SQL :: How To Remove Duplicate Records Based On Date Column

Jul 28, 2015

I have a requirement where i want to delete the records based on the Date column. I have table which contain the columns like machinename ,lasthardwarescandate

I want to delete the records based on the max(Lasthardwarescandate) i.e. latest one, column where the machine name is duplicate menace it repeats. So how would i remove the duplicate machine names based on the Lasthardwarescandate column(There are multiple entries for the Lasthardwarescandate so i want to fetch the latest date column).

Note: Duplication should be removed based on “Last Hardware Scan” date.

Only latest date should be considered from multiple records for the same system. "

View 4 Replies View Related

SSRS 2005 Export To Excel (Remove Column Wrap)

May 22, 2008

We are experiencing problems with reporting services built-in Export to Excel. Basically, the columns get wrapped in Excel, which frustrates users who need to pivot and sort(ie the point of downloading to Excel). Is there a method for removing the column wrapping? Please help

View 1 Replies View Related

SQL Server 2012 :: Remove String From Column Post Code Field

Sep 8, 2015

I am querying with a SELECT statement against an address table that has a post code column with corrupt data.

Sample record:- Northants NN4 0NB
Should be NN4 0NB

I have used the following on another column:-

LEFT(A.Addr1,CASE WHEN CHARINDEX ('(', A.Addr1) =0 THEN LEN(A.Addr1) ELSE CHARINDEX('(' ,A.Addr1) -1 END) AS 'Address 1'

but unable to correct this problem?

View 9 Replies View Related

Dynamiclly Remove Duplicate Rows From Results Table Based On Column Data?

Nov 30, 2007



I have a results table that was created from many different sources in SSIS. I have done calculations and created derived columns in it. I am trying to figure out if there is a way to remove duplicate rows from this table without first writing it to a temp sql table and then parsing through it to remove them.

each row has a like key in a column - I would like to remove like rows keeping specific columns in the resulting row based on the data in this key field.

Ideas?
Thanks,
Ad.

View 7 Replies View Related

Sql Job Steps Warnings.

Apr 22, 2008

i have setup a sql job with 4 steps
1-checkdb
2-indexdefrag
3-sp_updatestats
4-email notification.

if 1,2 success go next step
if 1,2,3 fails go step 4
if 3, 4 success quit with success
if 4 fails quit with failure

i created a script and pasted it in production server and i get this msg:

Warning: Non-existent step referenced by @on_fail_step_id.

Warning: Non-existent step referenced by @on_fail_step_id.

Warning: Non-existent step referenced by @on_fail_step_id.



how can i fix it? I think the error is due to step 4 not executing before calling it from stepe 1,2,3

View 1 Replies View Related

SQL Browser Warnings In A Cluster

Nov 23, 2007

We have a 6 node cluster with 4 SQL Server named instances in the cluster. I am noticing a lot of warnings in the event log with the following information:
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance
<instance name> is not valid.
The event occurs for all four instances.
Additional Information:
* OS is Windows 2003 R2 Enterprise x64 Edition w/SP2
* SQL Server 2005 Enterprise Edition w/SP1, hot fix level 2221
* All SQL services runs under the same domain user account

I did some internet searches and found several others who have had this problem. However, I didn't see any solutions. There also seems to be a similar problem with SQL Express but that is not what I am using.

Any thoughts are appreciated.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved