XML Source To Data Conversion To OLE DB Destination - Loss Of CDATA
Apr 9, 2007
I'm trying to build a DTSX package that FTP's an XML file to the local file system and then imports it into an existing table.
My "Data Flow" for the package starts with an XML Source component and then goes to Data Conversion component and then to an OLE DB Destination component.
It all executes with out error and seems to work fine, but when I look at the data in the table after I've run the package it seems to have inserted the appropriate number of rows from the XML file but all of the column values are NULL.
All of the data in the XML file is surrounded by <![CDATA[ ]]> and I discovered that if I remove the CDATA wrapper by hand then it inserts the data properly. The only problem is that I'm not in a position to have the data provider remove the CDATA tags and some of the data in the XML file needs the CDATA wrapper or else it will not validate.
Anyone know of anything I can do to get the CDATA to import properly?
I have an odd problem that is driving me nutz. I have a very simple SSIS package that imports a 5 colum flatfile into a sql Server 2005 Table.
When I created this package with the wizzard, it will execute perfectly fine and processes all rows into the destination table.
But when I hit F5 to execute it manually it will fail before inserting a single row.
The error it generates is (Spalte 5 is a Datetime in the format DD.MM.YYYY) :
Error: 0xC02020A1 at Datenflusstask, Source - Daten_NC_1_txt [1]: Data conversion failed. The data conversion for column "Spalte 5" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Datenflusstask, Source - Daten_NC_1_txt [1]: The "output column "Spalte 5" (25)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Spalte 5" (25)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0202092 at Datenflusstask, Source - Daten_NC_1_txt [1]: An error occurred while processing file "C:WorkDaten_NC_1.txt" on data row 177.
Edit: Modified the Title so it properly reflects the Problem & the Solution
I'm getting a very strange potential loss of data error on my flat file source in the data flow. The flat file is fixed width and the column in question is defined as numeric [DT_NUMERIC]. The transform runs great if this column IS NOT A ZERO. As soon as a zero value is found, I get the error. It errors on the flat file source, so I haven't been able to use a data viewer to see what's going on.
I am inserting rows using OLEDBDestination and want to redirect all error rows to EXCEL Destination.
I have used Data Conversion Transformation to Convert all strings to Unicode string fields before sending it to Excel Destination.
But its gives the following error.
[Data Conversion [16]] Error: Data conversion failed while converting column 'A' (53) to column "Copy of A" (95). The conversion returned status value 8 and status text "DBSTATUS_UNAVAILABLE".
[Data Conversion [16]] Error: The "output column "Copy of A" (95)" failed because error code 0xC020908E occurred, and the error row disposition on "output column "Copy of A" (95)" specifies failure on error. An error occurred on the specified object of the specified component.
Can someone please tell me what should I do to make it work?
[Flat File Destination [46500]] Error: Data conversion failed. The data conversion for column "Column 0" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page." What does this error mean exactly?
I am taking columns from a flat file source. Then I am adding some new columns then rewriting the file to a ragged file format with fixed column values. I've taken the Destination component off and it works fine. So I know it could be the destination component but what could it be? Any ideas?
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
I want to process data from source table to destination table without using cursor.
At this point; we are creating temp table and inserting data from source to temp table. once we get data into temp table; using while loop we are processing record one by one to destination table.
while executing stored procedure; we noticed that there are few records in source table which are invalid and stored procedure is terminating from such records.
Any better approach to log INVALID data and resume code to process next record instead of terminating.
I have read only permission in the source (OLTP) database. The source database is running in SQL Server 2000 and the size is more than 200 GB. I need to pull data from source and load target which is running in SQL server 2005.
Following are the objectives I want to achieve.
Data should be loaded on incremental basis.
Whatever changes take place (Update/Delete) in source, that should be replicated to already uploaded data.
Here I want to mention that, the source database does not have any identification key or timestamp column like Updated_Date by which I can filter the data which are recently inserted or updated into the source and upload the same. The source does not maintain any history data also. So I do not have any track of deleted record also.
I don€™t have any scope to change the schema in the source. In this scenario can anybody suggest me the best approach to achieve the above mentioned objectives?
Can I retrieve only the recent updated or inserted date form transaction log back up. Can log shipping solve the give the solution?
One more question. Say I have a table and I am exporting/importing all the data from/to my target table using SSIS or DTS. In this scenario does using query or using directly the table affects the performance?
I need to write TSQL script that will insert, update, delete rows in a production db from new, updated and deleted data from staging db. They are both in different servers and I can only use TSQL. Basically, the production DB needs to be synchornized with the staging DB.
I was thinking using dynamic sql, cursors, and linked servers. Any ideas?
i want to compare the source and destination data my source is Oledb source and destination is sql server destination I want to Compare the Data in destination with source and also want to add validation like iF Any row is there is destination but not in source delete that row if any row in source but not in destination Insert that row nd compare source with destination respect to Primary key if There is change in any column of that row Update that if not change than move to next record. Please tell me what is the sutable object and what to do Please Help me Out Thanks Sandeep
I am new to SSIS can u help me out in this i have a source(Flat File) and target SQL Server 2005. Source has got 2 columns- Col1 and Col2 even target has got 2 col's Col1 being the PK. I have created a package that checks if target and if the record exist it updates and if it does not it inserts. My package looks like
Source - lookup on target- Conditional split- Derived Column and then 2 OLE DB Destinations 1 for inserts and 1 for updates.
I have created a relationship in lookup with col1 from source and col1 from target and col2 as lookup col and connected red output to 1 OLE DB for inserts and redirect rows to it. Green out put i have taken to conditional split and gave condition like Col2 from source is not equal to lookup col2. I run the package with this it is inserting new records but not updating it.
I tried to add derived column after conditional split but lacks in writing expression that says update col2 records if they changed at source. Can u help me out in this scenario. I would appreciate if you could get back to me ASAP.
I am a complete newbie to SSIS. I can create a simple package to transfer data between SQL instances and thats about it.
I have tableA (source data) and tableB (Destination data). TableA has 4 column and tableB has 5. I want to transfer all of the columns from tableA into TableB, but the 5th column in tableB needs to be populated with the ServerInstance name of the server TableA sits on. Do I need to have multiple data sources to achieve this? I have tried but no matter how I set it up, the Column in the destination is set to ignore.
Inside a data flow task, i have a oledb source and destination. In my situation, I need to pull data from a table in the source, but also hard code some columns myself, which means my source is a blend of data from table, hard coded data, which will then have to be mapped to columns in oledb destination. Does anyone which option to choose in the oledb source dropdown for the data access mode. Keep in mind, i do need to run a a select query, as well as get data from a table. Is it possible to use multiple oledb sources and connect to one destination, because that is really what intend to do here. I am not sure how it will work, or even if its possible. Basically my source access mode needs to be a blend of sql command and table columns, how would that be implemented? Any help or advice is appreciated.
I have a new problem when I import data from an xml source file in two destination tables. The two tables are linked by a foreign key... for example :
table MOTHER (MOTHER_ID, MOTHER_NAME)
table CHILD (CHILD_ID, MOTHER_ID, MOTHER_NAME)
After a lot of transformations data are inserted into MOTHER table and I want to insert other fields of the data flow in CHILD table. To do this, I need the MOTHER_ID field that is auto incremented in MOTHER table.
My problem is to chain the insertion in CHILD table after the insertion in MOTHER table to be sure that the relative row in MOTHER table is really inserted. I haven't find any solution to chain another transformation task after my flow destination "Insert into MOTHER table".
The only solution I have found is to create a new flow control to insert data in CHILD table, using a lookup transformation task to bind with MOTHER table... But with this solution all my flow control transforms are made two times...
Is there a solution to chain two insertions with a foreign key constraint in a data flow?
I would like to replace data of some tables from STG to DEV database daily using SSIS package. Should I use "Transfer SQL Server Objects Task" to do that? Thanks.
The DTS works perfectly when I run it manually. However, when I run itas a job it fails. Before you ask if i'm running it under differentsecurity context. I have already made sure of that. I was logged intothe server through remote viewer, when I created and ran the package,as well as scheduling the job. So the accounts they're running underare consistent. They're the same accounts as the SQL Agent is runningunder and it's the sys admin account.The data source is a Fox pro database with a pull of two tables. I amusing Microsoft OLE DB Foxpro driver as my source connection and OLE DBConnection for SQL Server as my destination. I am doing a simple tableto table transformation. The path of my connection is a mapped Drive:E:Main. There are other packages and jobs within my job queue that arepointing to the same database and they seem to run fine using the abovemapped drive. The ONLY difference between this package and otherpackages are that, they're few months old and this one was created lastnight. I have also enabled logging on this package and here is thebelow error when the job fails:Package Steps execution information:Step 'DTSStep_DTSDataPumpTask_1' failedStep Error Source: Microsoft OLE DB Provider for Visual FoxProStep Error Description:Invalid path or file name.Step Error code: 80040E21Step Error Help File:Step Error Help Context ID:0Step Execution Started: 9/23/2006 11:39:17 AMStep Execution Completed: 9/23/2006 11:39:17 AMTotal Step Execution Time: 0.031 secondsProgress count in Step: 0
I have a package that does simple exporting from an excel sheet to a table. I used a Dataflow task with Excel Source and OLEDB Destination Components. And i created Package configurations for Source and Destination Components. After than when i execute the package i get the following error.
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLLPL_Config2.dtsConfig".
Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLDBCon2.dtsConfig".
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at ProductDetails_Import, Connection manager "Excel Connection Manager": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at Data Flow Task, Excel Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (1) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
Hi, I am less of a technical but more of a analyst professional and right now investgating on various tools / options for the new conversion project I will be leading in insurance client. One of the tools that client want to use is SSIS but the source and target database is not on SQL server but plans are to build a staging SQL server database for transformation. Does SSID supports this kind of ETL process where both source and target system are non SQL servers.
How do I retrieve the connections (connection managers) collections from Custom Data Flow destination? ComponentMetadata.RuntimeConnectionCollection is empty. I would like to be able to access all the connections defined in the package from the custom data flow task.
I came across code in which it was possible to access the Connections collection using the IDtsConnectionService for custom task (destination). The custom task has access to serviceProvider, whcih can be used to get access to the IDtsConnectionService interface but not the custom data flow task.
We have a single generic SSIS package that is used to import several hundred iSeries tables into SQL. I am not looking to rewrite the process. But I am looking for ways to improve performance.
I have tried retain same connection, maximum insert commit size, lock table (tablock), removed some large columns, played with the log file location and size, and now I am working to tweak the defaultbuffermaxrows.
To describe the data flow task - there are six data flows tasks (dft)  working at the same time. Each dtf has their own list of iSeries tables and columns and the corresponding generic SQL table names. Each dtf determines their list of tables based on the number of columns to import. So there is dft30 (iSeries table has 1-30 columns to import), dtf60 (iSeries table has 31-60 columns to import), etc. The destination SQL tables are generically called Staging30, Staging60, etc. Each column in the generic Staging tables are varchar(100). The dtfs are comprised of an OLE DB Source and an OLE DB Destination.
The OLE DB Source uses a SQL Command from Variable to build a SELECT statement. The OLE DB Source uses a connection manager that uses an IBM iAccess IBMDA400 provider. The SQL Command ends up looking like this for the dtf30. This specific example is importing from the iSeries table TDACLR and it only has two columns so it will be copied to the Staging30 table.
select TCREAS AS C1,TCDESC AS C2,0 AS C3,0 AS C4,0 AS C5,0 AS C6,0 AS C7,0 AS C8,0 AS C9,0 AS C10,0 AS C11,0 AS C12,0 AS C13,0 AS C14,0 AS C15,0 AS C16,0 AS C17,0 AS C18,0 AS C19,0 AS C20,0 AS C21,0 AS C22,0 AS C23,0 AS C24,0 AS C25,0 AS C26,0 AS C27,0 AS C28,0 AS C29,0 AS C30,''TDACLR'' AS T0 from Store01.TDACLR
The OLD DB Source variable value looks like the following, but I am not showing the full 30 columns
select cast(0 AS varchar(100)) AS C1,cast(0 AS varchar(100)) AS C2,cast(0 AS varchar(100)) AS C3,cast(0 AS varchar(100)) AS C4,cast(0 AS varchar(100)) AS C5, ... cast(0 AS varchar(100)) AS C30.
The OLE DB Destination uses OpenRowSet Using FastLoad From Variable. The insert into Staging30Â ends up looking like this.
Of course we then copy and transform the Staging30 data to the SQL table that equals T0.
But back to defaultbuffermaxrows. Previously the dtfs had default values of 10000 for DefaultBufferMaxRows and 10485760 for DefaultBufferSize. I added a SQL task to SUM the iSeries column sizes, TCREAS and TCDESC in this example, and set the DefaultBufferMaxRows by dividing the SUM of the columns max_length into 10485760. But I did not see a performance improvement. Do you think that redefining the columns as varchar(100) for the insert is significant? Should I possibly SUM the actual number of columns (2) as 2x100 or SUM the 30x100?
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
I know that anything in a CDATA section will be ignored by an XML parser. Does that hold true for the SSIS XML Source?
I am trying to import a large quantity of movie information and all of the reviews, synopsis, etc are contained in CDATA. example:
<synopsis size="100"><![CDATA[Four vignettes feature thugs in a pool hall, a tormented ex-con, a cop and a gangster.]]></synopsis>
Sounds like a good one, no?
The record gets inserted into the database however it contains a NULL in the field for the synopsis text. I would imagine that the reason for this would fall at the feet of CDATA's nature and that SSIS is ignoring it.
I am stuck on finding a solution to transpose source data from a system via a metadata look-up table into a destination table. I need a method to transpose/pivot the source data into columns (which are by various data-types). The datatypes for each column are listed in a metadata table.
Source Data Table:
Table Name: Source
SrcID AGE City Date 01 32 London 01-01-2013 02 35 Lagos 02-01-2013 03 36 NY 03-01-2013
Metadata Table:
Table Name:Metadata
MetaID Column_Name Column_type 11 AGE col_integer 22 City col_character 33 Date col_date
Destination table:
The source data to be loaded into the destination table(as shown below):
An SSIS package to transfer data from a DB instance on SQL Server 2005 to SQL Server 2000 is extremely slow. The package uses an OLEDB Source to OLEDB Destination for data transfer which is basically one table from sql server 2005 to sql server 2000. The job takes 5 minutes to transfer about 400 rows at night when there is very little activity on the server. During the day the job almost always times out.
On SQL Server 200 instances the job ran in minutes in the old 2000 package.
Is there an alternative to this. Tranfer Objects task does not work as there is apparently a defect according to Microsoft. Please let me know if there is any other option other than using a Execute 2000 package task or using an ActiveX Script to read records from one source and to insert them into the destination source, which I am not certain how long it might take and how viable will that be?
In my SSIS project I am populating an Excel spreadsheet with several worksheets. When I define a worksheet in Excel Destination Editor, I use Create Table SQL statement to create a worksheet. Most of the fields are defined as numbers, however when job runs my numeric fields appear as text in Excel with yellow warning sign - 'The number in this cell is formatted as text or preceeded by an apostrophe'. I need my numbers to appear as numbers. Is there a workaround for this?
Hi,I have a big problem with a database in MS SQL SERVER 2000.the rows into the some tables, for the second time, have been mixed betweenthey without appearing reason.the application that uses the db is totally TRANSACTIONAL and they do notexist query that they do not have clause WHERE.The database is on a computer with NAS architecture.I have this problem for the first time in 5 years of use of MS SQL SERVERCan someone help me?TIA
