XML Source Output Problems

May 20, 2008

I'm working on a project to put data sent in on XML files into a database but the computer I'm working on is a bit dated and I€™m trying to make things a little more efficient. In order to do this I unselected all the columns in the outputs not used in each data flow task. After the weekend however, SSIS will no longer validate correctly unless at least one column from each output is selected with the error :



TITLE: Package Validation Error

------------------------------



Package Validation Error



------------------------------

ADDITIONAL INFORMATION:



Error at (data flow task name) [DTS.Pipeline]: "output "(output name)" (19)" contains no output columns. An asynchronous output must contain output columns.



Error at (data flow task name) [DTS.Pipeline]: The layout failed validation.



Error at (data flow task name): There were errors during task validation.



(Microsoft.DataTransformationServices.VsIntegration)



------------------------------

BUTTONS:



OK

------------------------------

Is there anything that can be done to fix this? Thanks.

View 8 Replies


ADVERTISEMENT

DataReader Source Output Help

Mar 26, 2007

I have configured my DataReader to use an ADO.net (ODBC) connectivity (entered Select * from AMPFM) in Sqlcommand and can see my database columns listed in the Advanced Editor / Column mappings window. My process needs to perform a straight column to column population from AMPFM table into my dbo.visitfinancials table. How do I point the output to the above table?

View 11 Replies View Related

OLE DB Source Error Output

Nov 8, 2007

What is the purpose of the error output for an OLE DB Source component. Any sql that would cause an error such as converting a character to a number or division by zero causes the OLE DB Source component to fail regardless of the settings for the error output. Works perfect for OLE DB Destination but I cannot come up with any scenario where it would work for the OLE DB Source component.

Thanks in advance,
Brad

View 10 Replies View Related

OLE DB Source Error Output

Aug 3, 2007

In the Input and Output Properties tab under Advance Editor for OLE DB Source, I cannot remove columns. I copied this Source from a standard template and have made the normal changes to make it work. However I keep getting this error...Error: 0xC020837B at Load Server Security, OLE DB Source [1]: The output column "DBName" (1632) on the error output has no corresponding output column on the non-error output.Error: 0xC004706B at Load Server Security, DTS.Pipeline: "component "OLE DB Source" (1)" failed validation and returned validation status "VS_ISBROKEN".DBName of course is one of the columns that no longer exist, but I can't remove. Whenever I try to remove one of the columns, I get this error...Error at Load Server Security [OLE DB Source[1]]: The column cannot be deleted. The component does not allow columns to be deleted from this input or output. Is there anything that I can do to remove the columns? Is there just a simple setting that I can change to make this work?

View 6 Replies View Related

Can I Use * To Specify 'Output Column' For OLD DB Source Editor?

Dec 7, 2006



I am working on a situation similar to 'Get all from Table A that isn't in Table B' http://www.sqlis.com/default.aspx?311

I noticed that if one column's name of source table changes,(say Year to Year2) I have to modify all 'data flow transformations' in the task.

I am new to SSIS.



thanks! -ZZ

View 8 Replies View Related

Difference Between Flat File Source Output ?

Apr 24, 2006

Can someone tell me the difference between the Flat File Source Output - External Columns and Output Columns ?

I always end up changing the datatype properities in both to make things work :-)

View 3 Replies View Related

Purpose Of OLEDB Source Error Output?

Nov 6, 2007



This might be an ignorant question, but I can't figure this out.

What is the purpose of the Error output data flow from the OLEDB Source? I am trying to understand an example of what kind of "error" would cause a row to go down this path, and I can't come up with one.

Does anyone have a good example of how this could be useful?

View 5 Replies View Related

Error OutPut In Custom Source Component

May 11, 2006

For the Custome source Component ErrorOutput, should I go for asynchronous / synchronous Output.

If i go for synchronous output

// Create the error output.
IDTSOutput90 errorOutput = ComponentMetaData.OutputCollection.New();
errorOutput.IsErrorOut = true;
errorOutput.Name = "ErrorOutput";
errorOutput.SynchronousInputID = What Id is required here;
errorOutput.ExclusionGroup = 1;


Is it the IDTSOutput90 InPut.ID / OutPut.ID which should be assigned.

Thanks Regards

Anil

View 5 Replies View Related

XML Source Error Output Columns Set To NTEXT?

Aug 17, 2007

I've read about the XML Source sometimes setting error output columns to DT_WSTR(255), but mine is now setting them to DT_NTEXT.

Anyone have any suggestions short of an XML editor? I'm concerned that I might do something to "refresh" the columns and cause the problem again.

View 2 Replies View Related

Issue With XML Source And Error Output (Redirect Row)

Mar 26, 2008

This seems like a simple task that just doesn't work. I have an XML source, and on that source, I have the Error Output configured such that the Trunctations are set to "Ignore failure", and the Errors are all set to "Redirect Row". They are then being redirected to a Row Count transformation.

To set up a test for this, I have an integer type (DT_I4 specifically) that I am populating with an alpha-numeric value. For example:

<BatchID>118a</BatchID>

However, this column prevents my XML source from loading at all, and throws the following error:

The component "XML_SRC - File" (46) failed attempting to write data to output column "BatchID" (2030) on output "Payment Error Output" (115). Input string was not in a correct format.
I checked BatchID (2030) throught the advanced properties of the XML Source, and this is defined as a Unicode text stream [DT_NTEXT] field, so I don't see why there would be a problem.

Is this a bug, or am I overlooking something?

Thanks in advance for your help.
Jerad

View 6 Replies View Related

Flat File Source - Add Output Field

Jan 16, 2007

I am moving data from a flat file source to a SQL Server table. But I want to add a columm that IS in the destination table, but NOT in the source file. Say the table column name is XXX in destination table, and there will be a global variable called @[User::XXX] that remains constant throughout the package. I would like to put the variable value into the destination column, even though the source file does not contain the field. Is there an easy way to do this?

View 4 Replies View Related

Adding Error Output To Custom Source Component

Dec 6, 2007

Hi all,
I saw a couple of other posts here on this topic, but none quite got to my issue.
I'm trying to add error output to a custom source component (not a script, a custom component). The samples all seem to deal with transform components, and my issues seem to be unique to source components.

I have the following code related to error handling ...

Public Overloads Overrides Sub ProvideComponentProperties()

...

Dim output As IDTSOutput90 = ComponentMetaData.OutputCollection.New

output.Name = OUTPUTCOLUMNNAME


output.ExternalMetadataColumnCollection.IsUsed = True

ComponentMetaData.UsesDispositions = True

output.ErrorRowDisposition = DTSRowDisposition.RD_NotUsed

output.ErrorOrTruncationOperation = "Something got truncated or blew up"

Dim errorOutput As IDTSOutput90 = ComponentMetaData.OutputCollection.New

errorOutput.Name = ERRORCOLUMNNAME

errorOutput.IsErrorOut = True

...
End Sub


Public Overloads Overrides Sub ReinitializeMetaData()


Dim output As IDTSOutput90 = ComponentMetaData.OutputCollection(OUTPUTCOLUMNNAME)

Dim outColumn As IDTSOutputColumn90 = output.OutputColumnCollection.New


outColumn.Name = strName

outColumn.SetDataTypeProperties(DataType.DT_I4, 0, 0, 0, 0)



Dim metadataColumn As IDTSExternalMetadataColumn90 = output.ExternalMetadataColumnCollection.New


metadataColumn.Name = outColumn.Name

metadataColumn.DataType = outColumn.DataType

metadataColumn.Precision = outColumn.Precision

metadataColumn.Length = outColumn.Length

metadataColumn.Scale = outColumn.Scale

metadataColumn.CodePage = outColumn.CodePage

outColumn.ExternalMetadataColumnID = metadataColumn.ID


outColumn.ErrorRowDisposition = DTSRowDisposition.RD_NotUsed

outColumn.ErrorOrTruncationOperation = "Something Truncated!"

outColumn.TruncationRowDisposition = DTSRowDisposition.RD_NotUsed

Dim errorOutput As IDTSOutput90 = ComponentMetaData.OutputCollection(ERRORCOLUMNNAME)

Dim errorColumn As IDTSOutputColumn90 = errorOutput.OutputColumnCollection.New

errorColumn.Name = outColumn.Name

errorColumn.SetDataTypeProperties(DataType.DT_I4, 0, 0, 0, 0)
...
End Sub

The confusions I have are:
a) the stock advanced properties editor (I haven't provided a custom one) doesn't seem to "realize" that I have an error output, so provides no method to configure. I am believing it would need to know which Output columns can have their error/truncation redirected. I'd have thought setting ErrorRowDisposition on my output column would have been enough to trigger this ??
b) since I don't have any means of configuring, not surprisingly, when I try to connect my error output, designer complains that, "Ths error output cannot receive any error rows. This occurs for several reasons: Input columns or output columns are not yet defined. Error handling is not supported by the component. Error handling is not configured for the component."
c) UsesDispoistions would seem to be appropriate only for a transform component

Thanks for reading, and appreciate any help or pointers.
Bill

View 5 Replies View Related

Flat File Source And Destination - Need Fixed Width Output

Sep 14, 2007

I have a text file that is comma delimited and im pulling it in with a flatfile connection manager. I want to read some of the data, then output another flat file but in a fixed column width. What settings do I made to the connection manager of the output flatfile ?

View 9 Replies View Related

XML Source Editor Columns Configuration Is NOT Persisting Output Name Selection

Oct 25, 2007

Greetings everyone,

I am seeing a particular problem in the XML Source Editor "Columns" configuration where it is not persisting the "Output name" selection.

Control Flow Tab:
1. I use a "Exec SQL Command" to drop, create, or alter the destination tables in the database that I want to be repository for the inbound XML data. The data types are fairly straightforward.

2. I add a singular "Data Flow"

Data Flow Tab:

1. I add a "XML Source" task, and assign a well-defined XML file. I then use the "Generate XSD" option in the "Connection manager"; and I am fairly satisfied with the generated XSD.

2. I create "OLE DB Destination"

3. I wire the "XML Source" to the "OLE DB Destination". In the "XML Source" in the "Columns".

4. I go to the dropdown list of "Output name" and see the list ordered with the various complex-types that I want to map and transfer to a target table.

For the sake of this report, I select the 5th one down on the list (for which I already have a target table) - let's call this "Mesh"

5. In the "Input Output" dialog, I select the "output" to be the desired 5th item, "Mesh"

6. I check all my mappings so that they map one-to-one ... XML name entries match SQL table destination mapping entries; correct types; correct size

7. Check the metadata and it all looks good.

8. When I hit "Debug" to test the package the failure occurs at the "XML Source". The error report comes back saying that it failed because "field xxx in Contributor was truncated". However, "Contributor" corresponds to the 1st name in the dropdown list presented in "Columns" "Output name:".

If I select return to Step 4, when I open up "Columns" I see that my previous selection of the 5th item on the list named "Mesh" was not persisted, but invariably and no matter how often I select item #5 "Mesh" and save to ensure that selection sticks, it is not persisted.

I hand-edited the .dtsx file and only then was I able to make this stick. However, if I ever re-save the package this non-persistency pops up again.

Am I doing something wrong here or is this a known defect? As I have several dozen XSD mappings that I want to transfer to tables, hand-editing is not something I relish.

I look forward to your reply.
RudyC

View 1 Replies View Related

DataReader Source Error - Cannot Change The Datatype, Precision Or Scale In The Output Columns

Oct 3, 2007

I have a data source that I access via odbc in a DataReader Source component in SSIS. I can access the data fine. However, I am having problems with certain fields that are numeric (specifically home prices ranging from 100,000.00 to 99,999,999.00). In the advanced editor for my data reader source under the input and output properties tab, in data reader output under the external columns and output columns, these fields for some reason default to numeric data types with a precision of 4 and a scale of zero, not large enough to hold the data that is coming in. This causes errors that make the data come in as null (after i specify to ignore the errors).

I can change the precision and scale to 18 and 4 in the external columns, but when I try to change the datatype, precision or scale in the output columns I get the following message:

Property Value is not valid.

The details are:

Error at Import DataReader Source: The data type of output columns on the component "DataReader Source" cannot be changed.
Error at DataReader Source: System.Runtime.InteropServices.COMException (0xC020837D)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.SetOutputColumnDataTypeProperties(Int32 iOutputID, Int32 iOutputColumnID, DataType eDataType, Int32 iLength, Int32 iPrecision, Int32 iScale, Int32 iCodePage)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostSetOutputColumnDataTypeProperties(IDTSManagedComponentWrapper90 wrapper, Int32 iOutputID, Int32 iOutputColumnID, DataType eDataType, Int32 iLength, Int32 iPrecision, Int32 iScale, Int32 iCodePage)

Any help is greatly appreciated.
Dave

View 1 Replies View Related

Integration Services :: Custom Source Component - No Datatype Set When User Add Output Column

Aug 17, 2015

I'm writing a custom source component that reads data from a SharePoint list with dynamic mapping to output columns. It's my first custom component and it's based on several samples and tutorials from Internet

Output columns are not created by the component itself, they must be added by user at design time. The component makes dynamically an association between SharePoint fields and available output columns at run-time (based on an mapping table).

I made a very basic skeleton and I encounter a problem when I add a column to output: it has no datatype and when I try to set one I have an the error Property value is not valid, The component xxxxxx does not allow setting output column datatype properties.

Imports System
Imports Microsoft.SqlServer.Dts.Pipeline
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
<DtsPipelineComponent(ComponentType:=ComponentType.SourceAdapter,
DisplayName:="SharePoint Dynamic Assoc List Source",

[Code] ....

View 4 Replies View Related

Urgent. Output Columns Are Not Appearing When I Use OLEDB Data Source With An Oracle Stored Procedure In Dataflow Task

Nov 12, 2007

I am using execute sql task to run a stored procedure in oracle database which returns a resultset. This works. Now I need to send the ouput to a destination table in a sql database. Should I use for each loop to pick the resultset and insert it into the destination one by one (which I dont think is a great idea) or is there a better way to accomplish this task (in data flow task) ?

When I use dataflow task instead of execute sql task, the main issue is I am not able to see the output columns when I execute an oracle stored procedure, but when I see the preview I can see the resultset . But I can see the output columns for a sql server stored procedure.

View 9 Replies View Related

Flat File Source Error Output Conversion Error With UNICODE Files

May 14, 2008

i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.


simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".

i hope you can help me with issue.

Thanks in advance.

View 5 Replies View Related

Number Of ROWS Of Output Of Aggregate Transformation Sometimes Doesn't Match The Output From T-SQL Query

Dec 25, 2006

While using Aggregate Transformation to group one column,the rows of output sometimes larger than the rows returned by a T-SQL statement via SSMS.

For example,the output of the Aggregate Transformation may be 960216 ,but the

'Select Count(Orderid) From ... Group By ***' T-SQL Statement returns 96018*.

I'm sure the Group By of the Aggregate Transformation is right!



But ,when I set the "keyscale" property of the transformation,the results match!

In my opinion,the "keyscale" property will jsut affects the performance of the transformaiton,but not the result of the transformation.

Thanks for your advice.

View 2 Replies View Related

Transact SQL :: Generic Store Procedure Call Without Output Parameters But Catching Output

Sep 21, 2015

Inside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])

EX1 : @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 : @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 : @SPToCall : [sp_GetSomeResult]

I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working

DECLARE @myFinalVarFilledWithCachedOutput 
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'

[code]...

View 3 Replies View Related

Output And Error Output Write The Same Table At The Same Time, Stall The Process.

Aug 30, 2006

Hi

I have Lookup task to determine if source data should be updated to or insert to the customer table. After Lookup task, the Error Output pipeline will redirect to insert new data to the table and the Output pipeline will update customer table. But these two tasks will be processing at the same time which causes stall on the process. Never end.....

The job is similiart to what Slow Changing Dimention does but it won't update the table at the same time.

What can I do to avoid such situation?

Thanks in advance,

JD

View 4 Replies View Related

Using Output From A Stored Procedure As An Output Column In The OLE DB Command Transformation

Dec 8, 2006

I am working on an OLAP modeled database.

I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).

I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.

The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.

What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?

I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.

Thanks in advance for any assistance you can provide.

View 9 Replies View Related

Query Produces Jumbled Output / Output Not In Sequence

Jul 23, 2005

Hi!Server info -Win2K3 Server +SP1 with 1 GB Memory and 1.5 GB Virtual MemorySQL Server 2000 Enterprise Edition + SP3 running on this.Required result -Create a SQL Script that will contain a set of create, update, insert& delete statements (about 17500 lines including blank lines) thatcan be run on different databases seperatelyHow we do this -We have a SP - that creates a temporary table and then calls anotherSP that actually populates the temporary table created by the first SP*Samples of both SPs are below -PROBLEMThe result is directed to a file -However when the query is run it runs through the entire script but'Jumbles' the outputRunning the same scripts on a copy of the database on other machineswork fine and the size of the outfiles is exactly the sameI have increased the page size to 2.5 GB and restarted the server.Running the sp now generated the correct output a few times but gotjumbled as before after a few more users logged in and activity on theserver increased.Another interesting point is that the output is jumbled exactly thesame way each time. It seems the sql executes correctly and writesthe output in chunks only writting the chunks out of sequence - butin the same sequence each time.e.g. of expected resultInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table3Values ................Update RefGenSet Last = 1234Where RefGenRef = 1JUMBLED OUTPUTInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table2Values ...Values ...Update RefGenSet Last = 1234Where RefGenRef = 1Insert into Table3Values ................Insert into Table1Values c, d, e, 21, 12....Insert into Table2----------------------------------------Sample of First Script - STATDATA_RSLT**************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOSET NOCOUNT ONGOCREATE PROCEDURE StatData_rsltASCREATE TABLE #tbl_Script(ScriptText varchar(4000))EXEC TestStatData_intSELECT t.ScriptTextFROM #tbl_Script tGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************************Sample of CALLED SP - TestStatData_int*******************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOCREATE PROCEDURE TestStatData_intASDECLARE @AttrRef int,@TestID int,@PrtTestRef int,@AttrType tinyint,@EdtblSw tinyint,@NmValRef int,@SrtTypeRef int,@AttrStr varchar(20),@TestStr varchar(20),@PrtTestStr varchar(20),@AttrTypeStr varchar(20),@EdtblStr varchar(20),@NmValStr varchar(20),@SrtTypeStr varchar(20),@TestRef int,@Seq int,@PrtRef int,@Value varchar(255),@TermDate datetime,@AttrID int,@DefSw tinyint,@WantSw tinyint,@TestRefStr varchar(20),@SeqStr varchar(20),@PrtStr varchar(20),@TermDateStr varchar(255),@AttrIDStr varchar(20),@DefStr varchar(20),@WantStr varchar(20),@LanRef int,@LanStr varchar(20),@Code varchar(20),@Desc varchar(255),@MultiCode varchar(20),@MultiDesc varchar(255),@InhSw tinyint,@InhStr varchar(20),@InhFrom int,@InhFromStr varchar(20),@Lan_TestRef int,@ActSw tinyint,@ActSwStr varchar(20)SELECT @Lan_TestRef = dbo.fn_GetTestRef('Lan')INSERT INTO #tbl_ScriptVALUES('')-- Create tablesINSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_Test (AttrRef int, TestID int , PrtTestRefint, AttrType tinyint, EdtblSw tinyint, NmValRef int, SrtTypeRefint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES('CREATE TABLE #tbl_TestAttr(AttrRef int, TestRef int, Seq int,PrtRef int, AttrType tinyint, Value varchar(255), TermDate datetime,AttrID int, DefSw tinyint, WantSw tinyint, ActSw tinyint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_AttrName(AttrRef int, LanRef int, Codevarchar(20), [Desc] varchar(255), MultiCode varchar(20), MultiDescvarchar(255), InhSw tinyint, InhFrom int)')INSERT INTO #tbl_ScriptVALUES ('')-- insert Test valuesDECLARE Test_cursor CURSOR FORSELECT l.AttrRef, l.TestID, l.PrtTestRef, l.AttrType, l.EdtblSw,l.NmValRef, l.SrtTypeRefFROM Test lOPEN Test_cursorFETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestStr = ISNULL(CAST(@TestID as varchar), 'NULL'),@PrtTestStr = ISNULL(CAST(@PrtTestRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@EdtblStr = ISNULL(CAST(@EdtblSw as varchar), 'NULL'),@NmValStr = ISNULL(CAST(@NmValRef as varchar), 'NULL'),@SrtTypeStr = ISNULL(CAST(@SrtTypeRef as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_Test(AttrRef, TestID, PrtTestRef,AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('VALUES ( ' + @AttrStr + ', ' + @TestStr + ', ' +@PrtTestStr+ ', ' + @AttrTypeStr + ', ' + @EdtblStr + ', ' + @NmValStr + ', ' +@SrtTypeStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefENDCLOSE Test_cursorDEALLOCATE Test_cursorDECLARE TestAttr_cursor CURSOR FORSELECT le.AttrRef, le.TestRef, le.Seq, le.PrtRef, le.AttrType,le.Value,le.TermDate, le.AttrID, le.DefSw, le.WantSw, le.ActSwFROM TestAttr leWHERE le.WantSw = 1AND le.ActSw = 1OPEN TestAttr_cursorFETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestRefStr = ISNULL(CAST(@TestRef as varchar), 'NULL'),@SeqStr = ISNULL(CAST(@Seq as varchar), 'NULL'),@PrtStr = ISNULL(CAST(@PrtRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@Value = ISNULL(@Value, 'NULL'),@TermDateStr = ISNULL(CAST(@TermDate as varchar), 'NULL'),@AttrIDStr = ISNULL(CAST(@AttrID as varchar), 'NULL'),@DefStr = ISNULL(CAST(@DefSw as varchar), 'NULL'),@WantStr = ISNULL(CAST(@WantSw as varchar), 'NULL'),@ActSwStr = ISNULL(CAST(@ActSw as varchar), '1')SELECT @Value = '''' + @Value + ''''WHERE @Value <> 'NULL'INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_TestAttr(AttrRef, TestRef, Seq, PrtRef,AttrType, Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @TestRefStr + ', ' +@SeqStr+ ', ' + @PrtStr + ', ' + @AttrTypeStr + ', ' + @Value + ', ' +@TermDateStr + ', ' + @AttrIDStr + ', ' + @DefStr + ', ' + @WantStr+', '+ @ActSwStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwENDCLOSE TestAttr_cursorDEALLOCATE TestAttr_cursorDECLARE AttrName_cursor CURSOR FORSELECT e.AttrRef, e.LanRef, e.Code, e.[Desc], e.MultiCode,e.MultiDesc, e.InhSw, e.InhFromFROM AttrName e, TestAttr leWHERE e.LanRef = 0AND e.AttrRef = le.AttrRefAND le.WantSw = 1AND le.ActSw = 1OPEN AttrName_cursorFETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@LanStr = ISNULL(CAST(@LanRef as varchar), 'NULL'),@Code = ISNULL(@Code, 'NULL'),@Desc = ISNULL(@Desc, 'NULL'),@MultiCode = ISNULL(@MultiCode, 'NULL'),@MultiDesc = ISNULL(@MultiDesc, 'NULL'),@InhStr = ISNULL(CAST(@InhSw as varchar), 'NULL'),@InhFromStr = ISNULL(CAST(@InhFrom as varchar), 'NULL')SELECT @Code = REPLACE(@Code, '''',''''''),@Desc = REPLACE(@Desc, '''','''''') ,@MultiCode = REPLACE(@MultiCode, '''','''''') ,@MultiDesc = REPLACE(@MultiDesc, '''','''''')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_AttrName(AttrRef, LanRef, Code, [Desc],MultiCode, MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @LanStr + ', ''' + @Code +''', ''' + @Desc + ''', ''' + @MultiCode + ''', ''' + @MultiDesc +''',' + @InhStr + ', ' + @InhFromStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromENDCLOSE AttrName_cursorDEALLOCATE AttrName_cursor-- Do update TestAttr dataINSERT INTO #tbl_ScriptVALUES ('UPDATE le')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' le.TestRef = t.TestRef,')INSERT INTO #tbl_ScriptVALUES (' le.PrtRef = t.PrtRef,')INSERT INTO #tbl_ScriptVALUES (' le.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' le.Value = t.Value,')INSERT INTO #tbl_ScriptVALUES (' le.TermDate = t.TermDate,')INSERT INTO #tbl_ScriptVALUES (' le.AttrID = t.AttrID,')INSERT INTO #tbl_ScriptVALUES (' le.DefSw = t.DefSw,')INSERT INTO #tbl_ScriptVALUES (' le.WantSw = t.WantSw,')INSERT INTO #tbl_ScriptVALUES (' le.ActSw = t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM TestAttr le, #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('WHERE le.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Update AttrNameINSERT INTO #tbl_ScriptVALUES ('UPDATE en')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' en.Code = te.Code,')INSERT INTO #tbl_ScriptVALUES (' en.[Desc] = te.[Desc],')INSERT INTO #tbl_ScriptVALUES (' en.MultiCode = te.MultiCode,')INSERT INTO #tbl_ScriptVALUES (' en.MultiDesc = te.MultiDesc,')INSERT INTO #tbl_ScriptVALUES (' en.InhSw = te.InhSw,')INSERT INTO #tbl_ScriptVALUES (' en.InhFrom = te.InhFrom')INSERT INTO #tbl_ScriptVALUES ('FROM AttrName en, #tbl_AttrName te')INSERT INTO #tbl_ScriptVALUES ('WHERE en.AttrRef = te.AttrRef')INSERT INTO #tbl_ScriptVALUES (' AND en.LanRef = te.LanRef')INSERT INTO #tbl_ScriptVALUES (' AND te.LanRef = 0')-- Do update Test the dataINSERT INTO #tbl_ScriptVALUES ('UPDATE l')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' l.TestID = t.TestID,')INSERT INTO #tbl_ScriptVALUES (' l.PrtTestRef = t.PrtTestRef,')INSERT INTO #tbl_ScriptVALUES (' l.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' l.EdtblSw = t.EdtblSw,')INSERT INTO #tbl_ScriptVALUES (' l.NmValRef = t.NmValRef')INSERT INTO #tbl_ScriptVALUES ('FROM Test l, #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('WHERE l.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')--DELETE where just updatedINSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t, Test l')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = l.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM te')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE te.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Insert TestAttrINSERT INTO #tbl_ScriptVALUES ('INSERT INTO TestAttr (AttrRef, TestRef, Seq, PrtRef,AttrType,Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestRef, t.Seq, t.PrtRef, t.AttrType,t.Value, t.TermDate, t.AttrID, t.DefSw, t.WantSw, t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('')-- AttrNameINSERT INTO #tbl_ScriptVALUES ('INSERT INTO AttrName(AttrRef, LanRef, Code, [Desc],MultiCode,MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('SELECT te.AttrRef, le.AttrRef, te.Code, te.[Desc],te.MultiCode, te.MultiDesc, ')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN 0')INSERT INTO #tbl_ScriptVALUES (' ELSE 1 END,')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN NULL')INSERT INTO #tbl_ScriptVALUES (' ELSE 0 END')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE le.TestRef = ' + CAST(@Lan_TestRef as varchar))INSERT INTO #tbl_ScriptVALUES ('')-- Insert new rowsINSERT INTO #tbl_ScriptVALUES ('INSERT INTO Test(AttrRef, TestID, PrtTestRef, AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestID, t.PrtTestRef, t.AttrType,t.EdtblSw, t.NmValRef, t.SrtTypeRef')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_Test')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_TestAttr')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_AttrName')-- Update RefGenDECLARE @RefGenReflast int,@RefGenRefStr varchar(10)SELECT @RefGenReflast = lastFROM RefGenWHERE RefGenRef = 1SELECT @RefGenRefStr = ISNULL(CAST(@RefGenReflast as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES('')INSERT INTO #tbl_ScriptVALUES('UPDATE RefGen')INSERT INTO #tbl_ScriptVALUES ('SET Last = ' + @RefGenRefStr)INSERT INTO #tbl_ScriptVALUES ('WHERE RefGenRef = 1')INSERT INTO #tbl_ScriptVALUES ('')GOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************RegardsGlenn

View 5 Replies View Related

PrimeOutput : Difference Between 'Output' And 'output Buffer'

Aug 12, 2005

When overriding the PrimeOutput method in a custom component, you get as parameters the outputIDs and the output buffers (of type PipelineBuffer). using the outputIDs you can get IDTSOutput90 outputs.

View 5 Replies View Related

Integration Services :: Metadata Change In Source Disturbs All Configuration Of Source

Jun 18, 2015

I have a got a package with source as sql table which has got 50 columns. We are using only 10 columns out of this. Recently one column name has changed and thus throws error invalid mapping. When I open the source to do the changes noticed that all the colums are prselected now and also the datatypes got changed to default ( I had changed the datatypes as per my requirement while i developed). So now I had to select required columns from source and redo the datatype changes in advanced editor.Is there any option which doesnt disturb this settings and we just need to correct the mapping alone. 

View 4 Replies View Related

XML TASK XSL Variable: Exception 'Property New Source Has No Source Xml Text'

Dec 20, 2005

Hi,
I want to transform an xml flow to an html flow. For this, I create an XmlDataDocument, I add on it, all that I want, and I store it in a file (in a dataflow task).
After that, in an xml task, I set the input properties like that:
Operation type: xslt
SourceType: File connection
Source: ras.xml
 
All works fine. But now, I want to use a variable to store my xml data. So, instead of storing my data in ras.xml, I store it in a variable like that:
 
Dim v As Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSVariables90
Me.VariableDispenser.LockOneForWrite("RAS", v)
v("RAS").Value = doc.OuterXml
v.Unlock()
 
and in the xml task, I set configuration like that:
 
Operation type: xslt
SourceType: Variable
Source: user::RAS
 
But when I execute, I got this following exception:
 
Error: 0xC002F304 at Format HTML Mail, XML Task: An error occurred with the following error message: "Root element is missing.".
Error: 0xC002928F at Format HTML Mail, XML Task: Property "New Source" has no source Xml text; Xml Text is either invalid, null or empty string.
 
Furthermore, when I want to debug it, in replacing the xml task, by a script task, I can see that in my RAS variable, I get the xml data which is well formed.
 
<?xml version="1.0" encoding="UTF-8"?>
<root> €¦
</root>
 
(When I store it in a file, I can see it in IE)
 
Have you got an idea ?
 
 
 
 

View 3 Replies View Related

Loading Data Using Ole Db Source With Input Source Being A View

Dec 13, 2007

I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server). This view returns 420,591 rows from Query Analyzer in 21 seconds. Row length is 925. When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved. I modified the view to retun top 440, 000 and reran. This time all 420, 591 rows were retrieved and written in 22 seconds. Next, I tried to use a TOP 100 Percent. Again, only 2,000 rows were return after 30 minutes. TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free. Server has 13 gig of memory and no other processes were executing.

The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.

Have anyone else experience this or a similar issue? Anyone have a solutionexplanation?

View 13 Replies View Related

Using XML Source In SSIS Vs Script Source To Parse Xml Files.

Sep 14, 2007



Hi

I am having a huge xml file with nested section.
i also have a xsd file for that xml.
i have a destination table where the data from the xml should be loaded into.
i am using the xml source transformation. But o get all the data i need to use multiple merje joins to get the data in a single row which i can insert into the destination.i was not quiet convinced with using so many joins.

so i tried using the script source transformation where i am using xml objects to get the node and dynamically construction the data row. and the output is then inserted into the destination.
on comparing the two approach the one using the script source is working much faster than the xml source transformation.

i wanted to know is there any limitaion using the script source to parse through xml files.
also i would like to know any other better way of getting the data from xml source without using the joins.


Hari

View 7 Replies View Related

An Error Has Occurred During Report Processing. A Data Source Instance Has Not Been Supplied For The Data Source DetailDS_get_o

Mar 13, 2008

hi ,

i am trying for a drill through report (rdlc)

ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like

An error has occurred during report processing.


A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".







the code is



using System;

using System.Data;

using System.Data.SqlClient;

using System.Configuration;

using System.Collections;

using System.Web;

using System.Web.Security;

using System.Web.UI;

using System.Web.UI.WebControls;

using System.Web.UI.WebControls.WebParts;

using System.Web.UI.HtmlControls;

//using Microsoft.ApplicationBlocks.Data;

using Microsoft.Reporting.WebForms;

using DAC;

public partial class _Default : System.Web.UI.Page

{

protected void Page_Load(object sender, EventArgs e)

{

ReportViewer1.Visible = false;

}

protected void Button1_Click(object sender, EventArgs e)

{

DAC.clsReportsWoman obj = new clsReportsWoman();

DataSet ds = new DataSet();

ds = obj.get_order();

ReportViewer1.LocalReport.DataSources.Clear();

ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);



ReportViewer1.LocalReport.DataSources.Add(reds);

ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";

ReportViewer1.LocalReport.Refresh();

ReportViewer1.Visible = true;

}

protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)

{

DAC.clsReportsWoman obj = new clsReportsWoman();

ReportParameterInfoCollection DrillThroughValues =

e.Report.GetParameters();



foreach (ReportParameterInfo d in DrillThroughValues)

{

Label1.Text = d.Values[0].ToString().Trim();

}

LocalReport localreport = (LocalReport)e.Report;

string order_id = Label1.Text;

DataSet ds = new DataSet();

ds = obj.get_orderdetail(order_id);



ReportViewer1.LocalReport.DataSources.Clear();

ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);

ReportViewer1.LocalReport.DataSources.Add(reds);

ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");

ReportViewer1.LocalReport.Refresh();





}



}

the code in method get_orderdetail(order_id) is

public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.

View 1 Replies View Related

OLE DB Source To Flat File Destintation Using Fixed Width Columns - Determining Source Column Width

Feb 13, 2007

Hi,

I am trying to create a program that transfers tables to flat files.
At this point in time, I have suceeded in created one that creates delimited files.

However, I am now trying to create fixed-width files as you can do with the SSIS designer, but programatically.

Is there a way to programatically determine the width of a column from the source table? I can not seem to find any kind of function or member that stores this information or allows me to retrieve it.

I know what I need to change in order to set a width for a column, but I just don't know how to find the width without just asking the user to provide one.

View 5 Replies View Related

Amo And Creating Data Source And Data Source View Code

Feb 2, 2008

,
Hi
In this code how can I create a new data source and new data source view and model and structure that it run dynamic.
In this code I have a lot of errors, that they are about server and database don€™t have in current code,
In this code, first I should definition server or no?

Database dbNew = new Database (databaseName,
Utils.GetSyntacticallyValidID(databaseName, typeof(Database)));
srv.Databases.Add(dbNew);
dbNew.Update(true);
***********************************************************

How can I create data source and data source view and model and structure?
Please say code of that, and guide me.
databasename and srv is unknown.
Do I add other reference with analysis services?
Please explain about these codes:
************************************************************************
1)
RelationalDataSource dsNew = new RelationalDataSource(
datasourceName,
Utils.GetSyntacticallyValidID(
datasourceName,
typeof(RelationalDataSource)));

db.DataSources.Add(dsNew);
dsNew.ConnectionString = connectionString;

dsNew.Update();
2)

RelationalDataSourceView rdsv;

rdsv = db.DataSourceViews.Add(
datasourceviewName,
Utils.GetSyntacticallyValidID(
datasourceviewName,
typeof(RelationalDataSourceView)));

rdsv.DataSourceID = ds.ID
***************************************************************
3)
OleDbConnection cn = new OleDbConnection(ds.ConnectionString);
OleDbCommand cmd = new OleDbCommand(
"SELECT * FROM [" + tableName + "] WHERE 0=1", cn);
OleDbDataAdapter ad = new OleDbDataAdapter(cmd);

DataSet dss = new DataSet();
ad.FillSchema(dss, SchemaType.Source);

*************************************************************
4)

// Make sure we have the name we thought

dss.Tables[0].TableName = tableName;

// Clone here - the original DataTable already belongs to a DataSet
rdsv.Schema.Tables.Add(dss.Tables[tableName].Clone());
rdsv.Update();


5)

MiningStructure ms = db.MiningStructures.Add(miningstructureName, Utils.GetSyntacticallyValidID(miningstructureName,
typeof(MiningStructure)));
ms.Source = new DataSourceViewBinding(dsv.ID);
ms.CaseTableName = "Customer";

Add columns:
ScalarMiningStructureColumn smsc;

// From table "Customer" we will add a couple of columns
// CustomerID - key
smsc = new ScalarMiningStructureColumn("Customer ID",
Utils.GetSyntacticallyValidID("Customer ID", typeof(ScalarMiningStructureColumn)));
smsc.IsKey = true;
smsc.Content = "Key";
smsc.KeyColumns.Add("Customer", "customer_id", OleDbType.Integer);
ms.Columns.Add(smsc);

*******************************************
6)

MiningModel mm = ms.MiningModels.Add(miningmodelName,
Utils.GetSyntacticallyValidID(miningmodelName,
typeof(MiningModel)));


mm.Algorithm = "Microsoft_Decision_Trees";
mm.Parameters.Add("COMPLEXITY_PENALTY", 0.3);


MiningModelColumn mc = new MiningModelColumn("Customer ID",
Utils.GetSyntacticallyValidID("CustomerID",
typeof(MiningModelColumn)));
mc.SourceColumnID = ms.Columns["Customer ID"].ID;
mc.Usage = "Key";
mm.Columns.Add(mc);


mm.Update();

Please exactly say, whatever I want
Thanks a lot for your answer
Please don€™t move this question because I don€™t know where I should write this.

View 1 Replies View Related

How Do I Add An ODBC Connection Data Source As A Data Flow Source

Mar 2, 2007

I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.

Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?

Thanks in advance

ADG

View 2 Replies View Related

Create Data Source, Data Source View From XML?

May 8, 2007

hi everybody,
i want to create data source and data source view for data mining, with using C Sharp.
i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully,
and have i build data source and data source view, how to do it.?

thanks for you helps

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved