XML Task - Validation Fails
Oct 31, 2006
Now is this a limitation in SSIS or am I missing something. I have an XML file that needs validation. I am using the 'XML Task' control for that. The validation runs fine so long as the file is below a certain size. I am not sure what the cutoff size is but the validation runs fine if the XML file size is 60Mb. I include a few more records in my XML file to make the file size 65Mb and run ETL again and validation fails!
There is not much detail in the error message other than 'Task XML Validation failed'. I dont think there should be any kind of timeout issue. The whole process takes less than a minute before failing.
The issue is definately not with the new records that get added. I have verified the new file with xmlspy and it validates just fine. I have also validated the newly added records (5 Mb) through the same ETL process and that runs fine too.
Please suggest if I should spend time finding what the issue is or simply move on assuming its a known bug? Has any one experienced this?
Thanks,
Sumeet
View 4 Replies
ADVERTISEMENT
Mar 18, 2008
Problem:
When migrating packages to production using the DTSInstall program, phantom validation warnings are occurring.
Background /Installation options
We use the DTSInstall program to migrate code to our DEV, QA, and Production servers. Our migration process includes saving the package to the SQL server (msdb) and validating the package after install. In our most recent production migration, the package being migrated encountered warnings when validating after the install ("The package path referenced an object that cannot be found...") This warning seems to mean that I have configuration that cannot find an object to configure in the package. This error did not occur in other environments with the same code and configuration.
Troubleshooting performed:
1. Validate that configuration in all environments matched (ie. PackagePath was identical in all environments).
2. Opened the package on production server in Visual Studio, and received same warning message.
3. Executed the package in production using the validate only option: no validation warnings found.
4. Executed the package in production; package ran successfully and as expected.
5. Migrated the package from QA using dtutil and executed the package in production using the validate only option; no validation warnings found.
At this point I think I may have a problem with the DTSInstall program or the Visual Studio environment on our production box? Does DTSInstall use any parts of Visual Studio when running? Anything I am missing?
View 1 Replies
View Related
Aug 29, 2007
OK. Here's my situation. I check for the existence of a dummy .txt file using a script. I send an e-mail if it does not exist and exit package. The .txt file only exists if another .xls file is present which I import. However, during the validation phase of the package, the package fails because the .xls file does not exist. Is there a way to bypass the validation step? The only solution I came up with is to have a two-step job. The first runs the file check step and sends the e-mail. The second attemps to run the package and fails. Not a very graceful exit.
View 3 Replies
View Related
Jul 1, 2015
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies
View Related
Sep 18, 2007
I am using the XML Task to validate an XML file against the XSD schema.
Everything works fine, but about detailed errors in the case of the failed validation?
1) I specified €śOperationsResult€? Destination property to save the task execution outcome into a file.
2) Also, I turned on all possible events for logging.
Unfortunately, neither option produces a detailed validation error message.
Option 1 saves one single word €śtrue€? or €śfalse€? to a file.
Logging produces the following message:
Task failed to validate "A validation error occurred when validating the instance document.".
As end result, it is impossible to pinpoint the problem with the xml file and, consequently, fix the issue.
The expected behavior should be a detailed error message like the following (produced by StylusStudio):
file:///c:/temp/fafa/feed_bad.xml:12824,52: Datatype error: Type:InvalidDatatypeFacetException,
Message:Value '244212' must be less than or equal to MaxInclusive '4'.
It shows a precise location of the error in the XML file plus the specific XSD rule which failed.
Any idea what could be done to get the detailed error message for the XML Task Validation?
Regards,
Yitzhak
View 3 Replies
View Related
Jan 28, 2008
Hi,
I use a "Bulk Insert Task" inside of a "ForEach Container" and set the ConnectionString-Property of the "FlatFile-ConnectionManager" with an expression, pulling from a variable.
The packages works fine, but I get an Error-Message in the Output-Window:
Fehler: 0xC001401E bei Package, Verbindungs-Manager 'FlatFile': Der in der Verbindung angegebene Dateiname 'c:old.txt' war ungĂĽltig.
Translation:
Error: 0xC001401E at Package, Connection-Manager 'FlatFile': Cannot open the file 'c:old.txt'.
(Sorry, in this office is the no english version available).
'C:old.txt' is the initial value of the variable.
The new value is 'C:ew.txt' and I can see the new value in the Debugger or in a Scripttask.
Before the execution of the "Bulk Insert Task" starts, SSIS makes a validation. I have tried to stop the validation on setting the property "DelayValidation" = True (Package,ForEach-Container,BulkInsert-Task,FlatFile-ConnectionManager), but it is not possible to stop the validation and the error-message.
After printing the error-message, the variable is evaluated and the package works fine. After the first loop, there is no more error-message.
The error-message is a problem, because the operators look at the error-output.
As a workaround I can set the property in a Scriptatsk. Is there another solution????
Dan has a blog to this problem, but no solution:
http://www.developerdotstar.com/community/node/347
Thanks
Berthold Neumann
View 7 Replies
View Related
Aug 20, 2006
I have a package with an XML Task with OperationType = Validate. The source is a string variable and the second operand is a file connection to a schema file. The schema file <include>'s other schemas. I run the package in debug mode in Visual Studio with no errors. I exit Visual Studio. Then I open Visual Studio again and run the package in debug mode like before and it fails in the xml task with error: "Task failed to validate "No schema to use in validation was found.". I don't understand why it fails since no changes were made. The strange thing is that if I click the File Connection Manager for the schema file and click Browse and then reselect the same schema file again then it runs OK. Note that I have to exit Visual Studio and not just close the package in order to repro the error. It seems like exiting Visual Studio frees some resource that is essential to the validation. Reselecting the schema file in the Connection Manager seems to restore the resource. (SP1)
View 2 Replies
View Related
Nov 8, 2007
Dear all,
I am trying to executed a packege so that it loads data from from the excel file to the SQL Server Server database.
When I execute it, it prompts the following error message and 1 warning
The excel file has three colums, Week, Item and Value
Error 4 Validation error. Data Flow Task: OLE DB Source [94]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E37 Description: "ORA-00942: table or view does not exist ". Test - GET NW PERF 1.dtsx 0 0
Warning
Warning 1 Validation warning. Data Flow Task: OLE DB Destination [36]: The external metadata column collection is out of synchronization with the data source columns. The column "DAY" needs to be added to the external metadata column collection. The column "TCH_AVAIL" needs to be added to the external metadata column collection. The column "PDROP" needs to be added to the external metadata column collection. The column "P_HR" needs to be added to the external metadata column collection. The column "SFAIL" needs to be added to the external metadata column collection. The "external metadata column "VALUE" (90)" needs to be removed from the external metadata column collection. The "external metadata column "ITEM" (89)" needs to be removed from the external metadata column collection. Not in use - GET NW STATS.dtsx 0 0
Could someone give me a hand here.
Regards,
Ronald
View 1 Replies
View Related
Feb 8, 2006
I have an SSIS package which calls two other SSIS packages as part of it's control flow (using the Execute Package task). Both packages are stored in the same parent folder on the same server. The first child package runs successfully, the second does not. It ran fine for days until yesterday. Not sure what I might have done. I have tried to delay validation and recreate the connection. No go. Has anyone else run into this. I am running SQL 2005 RTM and VS 2005 RTM on XP Pro SP2. Any suggestions would be welcome.
View 9 Replies
View Related
Jul 24, 2007
When attempting to use the FTP task to download a file from a Mainframe system the task fails stating the filename as invalid because it doesn't begin with a "/".
Adding the slash to the front of the file name causes the mainframe to be unable to locate the file.
Commandline version of FTP.exe mimicks this behavior by working perfectly when the filename has no slash, and being unable to find the file when the slash is present.
Why does microsoft force a filename to start with a "/" and is there a way to make SSIS skip the validation phase for the FTP task?
View 7 Replies
View Related
Aug 14, 2015
Out of Memory when working with big XML Files:when validating XSD it process small files but when size close to 1gb it throws .I have 16 xml files out of which 8-10 Â files size will be around 1gb processing one by one in FOR EACH LOOP container in SSIS[XML Task] Error: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".Task XSD Validation failed.
system configuration :
processor:Intel(R) Xeon (R) CPU E5-2670 v2 @2.50GhZ 2.50 Hz
Installed memory (RAM): 61 GB
System type: 64 -Bit operating System
Visual studio:2012,32 bitÂ
virtual memory : 12499 MB
whether the size of the XML Document a limitation for the validation task ? or any system configuration i need to improve?
View 5 Replies
View Related
Jun 16, 2015
I've built an SSIS package in SSDT 2014. The package was running successfully
When I close and open the package it hangs on validation of single task out of all.
OLEDB DESTINATION Task
I have tried several times to close the SSDT and open but facing same issue.
These seems like bugs in SSIS/SSDT. What would cause the relocation of some script code to hang the validation process like this?
View 2 Replies
View Related
May 16, 2006
There is an execute package task that calls the child package. Both parent and child packages have the same password and the passwork is entered into the execute package task. Both packages reside in the same directory path.
Error: Error 0xC0012050 while loading package file "C:Documents and SettingsuserMy DocumentsVisual Studio 2005ProjectsExecutePackageTestExecutePackageTestExtractandWrite.dtsx". Package failed validation from the ExecutePackage task. The package cannot run.
When ExtractandWrite.dtsx is executed by right-clicking on package, the package executes without any errors.
DelayValidation = True for the Execute Package Task tasks is set and DelayValidation for the connection manager is set to True.
Does anyone have any thoughts as to what might be causing this error?
Thanks in advance for your assistance.
View 1 Replies
View Related
Jun 14, 2006
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
View 5 Replies
View Related
Oct 9, 2007
Hi, I was wondering if anybody knows the solution to this problem: I have a DTS package (SQL Server 2000) which is scheduled to pick up and process a TEXT file into the SQL table. The file contains a lot of fields, among them are DUE_DATE and DISC_DATE in such format "MM/DD/YYY" but they are string type in the file. During Transformation Task both fields are being imported into SQL table as DateTime. It happened that today the task failed because the file contained 00 00 0000 and it couldn't convert integer to DateTime. Unfortunatly there is no way to check on correctness of data when file is supplied. Is it possible to do something during transformation task to either remove the record and send email that that record is not being processed or convert bad data to blank string so it can be processed. Not sure if converting is a best practice because i don't know what kind of junk could be entered :)I noticed that actually the problem occurs quite often due to invalid data format supplied in the file. It worries me that the whole process fails when the Transformation fails for the specific record.Please help,Thank you in advance!
Tatyana Hughes
View 4 Replies
View Related
Jan 18, 2007
Hi:
I am getting the following error when I start debugging my Package, I am not sure what this is related to, but basically, input (datatype is a int, and its mapped to a column which is also int), so I am not sure whats happening here. The input column is actually a derived column, and its set as a 4 byte un-signed int, please advice on where should I start looking to troubleshoot this issue. This loanapplicationid is actually a user variable that is utilized by other tasks in my control flow as well:
Error: 0xC020901C at InsertApplicationCL5, OLE DB Destination [16]: There was an error with input column "LoanApplicationID" (1161) on input "OLE DB Destination Input" (29). The column status returned was: "The value violated the integrity constraints for the column.".
View 5 Replies
View Related
Jun 10, 2005
I've created an SSIS package that retrieves a file from an FTP
View 13 Replies
View Related
Aug 30, 2007
Hi everyone:
I have a very simple FTP Task that is supposed to grab two files from an ftp server and save them locally on my machine. The problem is that when I test the connection everything works okay (I know that this connection "hides" the password when seen on the Connection Manager Editor, so I re-enter it everytime I want to test the connection). I can see in the Task property that the username and passwords are set, but regardless I always get this error message:
Error: 0xC002918F at Cost Files Transfer, FTP Task: Unable to connect to FTP server using "FTP Bread".
Any idea what could be worng?
Thanks
Idelso
View 2 Replies
View Related
Jun 19, 2005
I setup my ExecuteSQL task to have a "Single Row" resultset. The query returns no rows. It fails. I don't think it should but then maybe this is consistent with the lookup transform piping rows down the error output if there is not a lookup value returned.
View 9 Replies
View Related
Jan 11, 2008
Hi,
I have a package that has several FTP tasks in sequence:
[ftp task 1]->[ftp task 2]->[ftp task 3]->[ftp task 4]
[Ftp task 4] fails about 20% of the time, for no apparent reason. This is the error message I receive:
[FTP Task] Error: Unable to receive files using "FTP Connection Manager".
The problem is, it works most of the time (80%), but every 4 or 5 tries, it fails. This makes NO sense to me. Is this a bug perhaps?
Please help... should we use an ftp script instead, as the ftp task seems rather unreliable.
Thanks
View 5 Replies
View Related
Jan 27, 2008
I have added a package from SQL Server to another package as an "Execute Package Task" it fails with this error:
Error: Error 0xC0014062 while preparing to load the package. The LoadFromSQLServer method has encountered OLE DB error code 0x80040E14 (Only the owner of DTS Package 'nVision_AgentPump' or a member of the sysadmin role may create new versions of it.). The SQL statement that was issued has failed. .
I tried setting the Protection Level to "don't save sensitive", and running the package in process and out. Any idea where to look?
Thanks,
Kayda
View 6 Replies
View Related
Sep 26, 2006
I have a package (i.e. child package) which runs itself perfectly fine without displaying any error.
However when I embeded this package inside another package (i.e. parent package) using Execute Package Task. The task always fails. It seems strange enough.
The child package has two variables that need to be passed in from parent package.
Can any expert here please help out? Thanks.
- Steve
View 10 Replies
View Related
Oct 15, 2007
Hi,
I have an FTP task on a package that runs every hour, downloads files from FTP and processes them.
If there are no files, the package should stop successfully after the FTP task, but the problem is that it fails because there are no files.
How can I avoid this?
And another question is there another way to download files and delete then with out another FTP task?
Thanks
View 4 Replies
View Related
Feb 9, 2005
I searched the forum's threads on this, and while there were many results, none have helped so far.
I am running a DTS package that is an ACtiveX Script Task using VBScript. The script uses CreateObject() to create a FileSystemObject to copy an .MDB before importing the tables into SQL Server. I want to copy it because of Access' notoriety of corrupting, and this much data being pumped out of Access could force me to Compact & Repair. I would rather do that on a copy.
Function Main()
Dim FSO
Set FSO=CreateObject("Scripting.FileSystemObject")
FSO.CopyFile "\<server><Share>Data.mdb", "\<server>C$DataCopyData.mdb"
Main = DTSTaskExecResult_Success
End Function
The DTS Package runs when I execute it from Ent. Manager, of course. It fails if scheduled, or course :(
I have set the Owner of the Scheduled Task to my domain account, which is also in the Adminstrators Group on the physical server with the SQL Server installation (Windows 2003 Server). I also did the unnecessary task of adding my domain account specifically to the destination folder, which is also Shared.
My sqlagent.exe service runs as SYSTEM on the server, so the SQLAgent should have no problem copying a file from one folder on the server to another.
The Scheduled Task fails with the common error:
DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSActiveScriptTask_1
DTSRun OnError: DTSStep_DTSActiveScriptTask_1, Error = -2147220482 (800403FE)
Error string: Error Code: 0
Error Source= Microsoft VBScript runtime error
Error Description: Permission denied
Error on Line 12
Error source: Microsoft Data Transformation Services (DTS) Package
Help file: sqldts80.hlp
Help context: 4500
Error Detail Records:
Error: -2147220482 (800403FE); Provider Error: 0 (0)
Error string: Error Code: 0
Error Source= Microsoft VBScript runtime error
Error Description: Permission denied
Error on Line 12
Error source: Microsoft Data Transformation Services (DTS) Package
Help file: sqldts80.hlp
Help context: 4500
DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1
DTSRun: Package execution complete.
I checked this MS KB Article (http://support.microsoft.com/kb/q298725/), but the instructions after opening DCOMcnfg.exe do not follow what is shown in the WMI window on Windows 2003 Server :rolleyes: (i.e. there is no "Default Security" tab to click.)
I am at a loss here. Thanks for your help.
View 4 Replies
View Related
Apr 3, 2014
We are running SQL Server 2012 SP1 64-Bit EE on Windows Server 2008 R2 SP1. I have a SSIS Package which connects to a FTP Site and downloads a file. Then it truncates a table and loads the file data into a table. This package works okay when executed from within VSS and SSMS (In SSISDB, right click on the package and execute). However, when I execute it as a Job it does not run and appears to be failing on the first task which is the FTP Task. SQL job step - Type: SSIS Package; Run as: SQL Server Agent Service Account (domain account called playuser); Authentication: Windows Authentication.In the All Executions Standard Report for the SSISDB Catalog, it only says: FTP Download File: Errors: There were errors during task validation.
Is this because my domain account does not have access to the FTP Site?Is this where I need to come up with a Proxy Account with Credentials?Do I need to set up a SQL Server Login (Proxy Account) with the same username being used in the FTP Batch file?
FTP Commands in a batch file:
username
password
cd omb
asc
get STRMASTER
quit
View 3 Replies
View Related
Mar 19, 2008
I have a Execute SQL Task that calls a stored procedure. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. It has a date parameter, but hard coding the date parameter does not work either. I checked the permissions on the Stored Procedure and SQL Agent, which are ok. When I change BypassPrepare to True, the query will execute and insert the rows to the required table. If someone has an explanation for this, I would appreciate some sql enlightenment. Thanks.
Dan
View 6 Replies
View Related
May 9, 2007
Hey,
I seem somehow stuck in some Script Task problems in SSIS on a x64-environment which has SP2 installed already.
If I'm running the package in 32-bit mode, I'm continuously getting the following error
"Warning: Precompiled script failed to load. Attempting to recompile. For more information, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885)."
on one of the package's scripts --
the given links advises to install SP2... what a useless hint.
And if I switch the project to run in Run64BitRuntime=True , another script tasks complains
"ScriptTask_78888010d24c477ea7c8d69f4f5568a5 is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
-- whatever that might mean...
Maybe I should add that the packages were running in 32-bit mode for the last 12 months now. Without any problems like that.
Those effects are occuring since we put SP2 onto the server...
Any comments on this topic? Similar experiences? Maybe yet some solutions too?
Regards, Frank
View 4 Replies
View Related
Mar 11, 2006
Hello,
I have two FTP Tasks configured in my SSIS package. One is for "Receive files" and the other is set for "Delete remote files." Both use variables for the source/destination paths. My remote path variable contains a wild card in the name field such as /usr/this/is/my/path/*.ext and it is working to FTP all the .ext files to my working directory. I then rename the files and want to remove the original files from the FTP server. I use the same variable as the remote path variable in the delete as I do in the receive.
Using the same FTP connection manager for both tasks I am always getting a failure on the delete. The FTP connection manger is setup to use the root user. Using a terminal I am able to open an FTP connection to the server and remove the files manually. There doesn't seem to be any detailed documentation on the FTP Task configured for Delete remote files so I'm hoping someone might have some insight to the problem.
I receive the same message for each of the files that was downloaded:
Error: 0xC001602A at MyPackage, Connection manager "FTP Connection Manager": An error occurred in the requested FTP operation. Detailed error description: 550 usr hisismypathdatafile1.ext: No such file or directory.
The attempt to delete file "usr hisismypathdatafile1.ext" failed. This may occur when the file does not exist, the file name was spelled incorrectly, or you do not have permissions to delete the file.
With the root user/working manually I'm not understanding the permission reason, the file does exist and is spelled correctly.
Dan
View 21 Replies
View Related
Apr 26, 2008
I have a SSIS Execute SQL Task that calls a stored procedure with a date parameter. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. Setting ByPass Prepare to True does not affect the outcome. I also used the query directly in the SQL task itself to no avail. Executing the query in Query Analyzer works. Any assistance would be greatly appreciated.
Dan
View 6 Replies
View Related
Sep 19, 2007
Does anyone have any insight to this error:
"Duplicate column name resolution could not be done because the ordinal specified a column of a different name"
I googled it and got one result with no resolution.
I get this error from SQL Server when a task in my dts package fails. My dts package is attempting to update records whose fields have changed based on a specified criteria.
Any help would be greatly appreciated.
TIA,
Jennifer
View 5 Replies
View Related
May 7, 2006
I have a SSIS package with an FTP task to download a Excel file and populate a table using an excel connection mnager and a SQL Server Destination and it always fails with the following error when scheduled:
The job failed. The Job was invoked by User sa. The last step to run was step 1 (FTP-DM-CRN_ALLOCATION_COMMENTS).
Executed as user: WEB-INTSQLSYSTEM. The package execution failed. The step failed.
The box on which SQL Server is installed is on a workgroup on the domain and the SQL Server is started up by the Local System user on the box.
I am thinking this has to do with windows security based on all the information that I have read on these kind of error messages. Any input on resolving this will be much appreciated.
Thanks,
MShah
View 1 Replies
View Related
Aug 22, 2007
Hi,
I have a package in which i have programatically created dataflow task. It used to work fine but now it fails with series of errors out of which one is below
Error 30002: Type 'MainPipe' is not defined. Line 63 Columns 33-40 Line Text: Dim DataFlowTask As MainPipe = CType(DataFlowTaskHost.InnerObject, MainPipe)
It seems all the function and classes referd from following dlls is not working:
Microsoft.SqlServer.DTSRuntimeWrap.dll
Microsoft.SqlServer.DTSPipelineWrap.dll
I say so because i get the following error also:
Error 30652: Reference required to assembly 'Microsoft.SqlServer.DTSRuntimeWrap, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' containing the type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90'. Add one to your project. Line 86 Columns 33-64 Line Text: DtsConvert.ToConnectionManager90(ChildPackage.Connections(""Source"")) These dlls are in GAC and in C:Program FilesMicrosoft SQL Server90SDKAssemblies with same version but still it gives above error.
Thanks
Mohit
View 11 Replies
View Related
