Your SQL Server Installation Is Either Corrupt Or Has Been Tampered With....
Dec 25, 2005
Hi,
I have just installed Microsoft Visual Web developer 2005 along with the Microsoft SQL Server 2005. Anyway, I tried to execute the SQL server(in directory ../Microsoft SQL Server MSSQL.1 MSSQL Binn) and it gave me this error:
"Your SQL Server installation is either corrupt or has been tampered with (Error getting instance ID from name.). Please uninstall then re-run setup to correct this problem "
I have formatted everything in my hard drive before re-installing Windows XP, and there isn't another SQL server except the one I just installed. If anyone could figure out what the problem is, can you please let me know how I could fix it?? Many many thanks.
I have installed SQLExpress. Whenever I boot my PC (XP Pro SP2) I get the following error just prior to logon: "Your SQL Server installation is either corrupt or has been tampered with (Error generating instance ID from name). Please uninstall the re-run setup to correct this problem."
I have now uninstalled and re-installed twice with no success. SQLExpress seems to be running fine, just this worrying message all the time.
I uninstalled everything, but had problems uninstalling the desktop engine. An attempts to reinstall just hung at "Please wait while Windows configures Microsoft SQL Server Desktop engine".
I used the MS recovery tool to remove the desktop engine.
After that running install would progress further thru the above dialog window, but then the progess bar just zipped backward and the dialog box disappeard. Nothing! No message or anything.
I am receiving the following error message at bootup: "Your SQL Server installation is either corrupt or has been tampered with (could not open SQLEVN70.RLL)."
My Operating System is: Windows XP Media Center Edition Service Pack 2 (build 2600)
I have tried reloading XP and Windows to no avail.
In doing a System Restore an error occurred in my SQL 2005. I've researched the thing, and am prepared to uninstall and reinstall SQL Server 2005, however, even tho I am administrator it will not uninstall. It will not reinstall over the previous install that's in place.
When I go through Control Panel to Add and Remove, when I click uninstall SQL Server 2005 it merely flashes a new window for a second and then does nothing. It will not start an uninstall action.
I don't know what to do short of a full XP Pro re-install.
I logged onto the console for the first time in 45 days and this message was on the login sceen. It goes on to state "please unistall the reun setup to correct the problem.
THis is a clustered setup (active ative) and not inclined to do a unstall. I searched the file system and the file is located in the proper location and same size as teh file for the second instance. The machine was to have some diagnostics for MS and Dell run followed by a reboot. I have postponed all the maint till tomorrow to research the issue and have the Winders guy on hand just in case.
I'm using SQL 2005 Standard edition with Windows 2000 SP 4. Whenever Windows boots, I get this message 'SQL Server installation is either corrupt or has been tampered with (error getting instance ID from name). I've un-installed and re-installed SQL but I keep getting the same message. What's up with that? Is that a serious condition or should I ignore it? Any suggestions, anybody?
As the title indicates, I'm having this error during installation. It occurs when I try to install the "Management Studio" part of the program. I've tried a bunch of things like copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note: Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Recently I have experienced the following scary scenario;
Users report a problem with an app, on diagnosis it is found that a bunch of SPs in SQL Server seem to be corrupt.
That is, when the code for them is listed, the 'Create Procedure..' line and several DECLARE lines are missing. Often the SP starts off in the middle of a variable name!!
Perhaps entries in the syscomments table have become corrupted?
Has anyone seen this problem before - is it perhaps a known bug in SQL Server 6.5?
I am a new user of SQL Server, Enterprise Manager, and Reporting Services (all three are installed on my comptuer) and have a problem. Please bear with me, I am very new at this and don't know all the correct terminology!
Someone in our IT group "discovered" that I had two "instances" of SQL on my machine. The way he came to this was that I was trying to use the "." to connect to my local machine in Query Analyzer and it wasn't pulling the databases I had saved to my computer, it was looking in another folder LOCALDB (a subset of my computer's name). He was unsure how to move all of my databases on my comptuer to that LOCALDB folder so he uninstalled the "LOCALDB" entry from the Add/Remove Programs screen to fix this. He said "No to All" when it prompted him to remove shared entries.
Consequently, when I load Enterprise Manager now, I get the "Snap-In failed to initialize" message. I also do not have any SQL Server options in my Start Menu Anymore. Query Analyzer still exists, though, I had saved a shortcut to my taskbar and I can still launch it from there. He is saying all I need is to re-install the "Client Tools" folder from the CD and that will fix the problem. I am skeptical, since it appears to be a larger issue (SQL isn't in my Start Menu anymore!).
I am sure that my SQL install is probably completely corrupt. I would like to return to full functionality of SQL Server, Enterprise Manager, and MRS as soon as possible. Can anyone begin to advise me on how to do so?
I really do appreciate your help in advance. jzafereo
my User database (DB) is on Drive E & System DB is on Drive C. going to replace Drive E due to HardDisk problem. i did DBCC CHECKDB on User DB & found no issue & errors. as i am going to move Data file from Drive E to C & then Back from Drive C, once Drive is replace. my question is as error was about TORN PAGE ERROR & if i copy back from Drive C to Drive E which NEW & CLEAN Drive does this TORN PAGE ERROR will be back. Any help is appreciated.
I hope there is some body arround here to solve my problem.
After reinstalling SQL server 2005 I got this message:
Your SQL Server installation is either corrupt or has been tampered with ( Error getting Instance ID From name). Please uninstall, then re-run stetup to correct this problem.
There are also 51 setup log files in: Setup/Boostrap/Log/files/
Can Ido that manually? Or is there another way to solve this problem.
I have a table which I am unable to drop, remove indexes from, and when I select the database from the EM and click on Recalculate get the following error:
When attempting to do a Recalculate from the EM I get: Error 2541 (SQL Server) Table Corrupt object id does not match between extent in allocation page a d sysindexes; check the following extent; alloc pg# 589050 extent# 589096 object id on extent=0 object name=0 object id in sysindexes=1420532094 (object name=MifDEtailOct)
When attempting to remove an index from the table I get: Error 2504 (SQL Server) Table Corrupt index id in alloc page does not match the index id in sysindexes (alloc page#=721664; extentid=721704; index id in alloc=5;index id in sysindexes = 4
When attempting to drop the table from the EM it disappears then when I do a refresh it's back again.
I run a checkdb on the database once a week, but that hasn't resolved the problem.
I also ran the sp_fixindex as outlined in the faq with no relief.
This initially happened on one table and now I'm getting the same error on a second table. I have removed the data from both tables, but can't seem to get rid of them.
These tables originally has a couple of million records in them so they were rather large before I moved the data to a new table.
Truncate also didn't work when I was attempting to clear the table. I had to create an sp to delete a few hundred thousand records at a time.
1) When I try to create a New Job/Alert/Operator, I get an error message:
Error 207: Invalid Column Name "category_id" Invalid Column Name "netsend_address" Invalid Column Name "last_netsend_date" Invalid Column Name "last_netsend_time"
.....All these are referring to columns in System Tables of the system Database MSDB.
2)In another SQL Server...say "A", in it's SQL Server Agent, using the Multi-Server Administration, I set up the SQL Server Agent of "A" as the Master (MSX) server, and set up a Target(TSX) server pointing to the Server "B" that has problems in SQL Agent....referred in 1) above. When I try to "Detach the MSX Server" from server B, i get a message Error 207: Invalid Column Name "netsend_address", and cannot detach..........This is again referrring to a System Table.
It appears that the problem is with the MSDB database being corrupt. Is there a way I can Repair a Corrupt MSDB without Re-installing SQL Server 2000 and without a Backup.
I was successfully able to installing sql server 2005 developer edition all peices except the "Workstation Component, Book Online, Development Tool", the last item in the installation list. It gave errror for bad sql.cab file. Although this developer edition came directly of the box this error came up in many attempts. Upon "Ignore" it gives error 2350.
I am able to run sql server's all the services and able to access it via VS.Net server browser. I can create and change tables etc. but there is no "Management Studio" installed. There is no icon for it either on the desktop or in the Start->SQL Server 2005 menu.
Is it possible to get and copy sql.cab file or entire client component from somewhere else? --Freed download or something? I searched for sql.cab file but it was not in the CD. It could be inside some other file or cmpressed.
I'd like to install SQL SERVER 2005 Express Edition ,I begin to install it from DVD but during the installation it dosn't ask me about any instance and after installation there isn't SQLExpress service and I can't use sql server .(there are not MSSQL and Binn directory in sql server 2005) but when I install visual studio 2005 and after that I install sql server 2005 it ask me for name of instance and with this way every thing is ok and I use sql server completely.
I 'd like to know the complete installation of sql server 2005 is depend on installation of visual studio 2005 befor it ?if not how can I introduce any instance after installation of sel server 2005 .
The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq
Please help,I am trying to install MSDE 2000 so that Backup exec will run on thisserver. I have gotten so far as to find an entry in my SQLSTP.TXT filethat says that c:mssql7 was detected so the install fails.Now, to start with there is no directory called C:mssql7 on thisserver. I have gone through all MS articles on manual removal of SQLserver and instances. I have searched the registry for mssql7 andremoved any keys that matched, as per MS article I have searched onSQLBOOT.dll and it is not present anywhere on my system and I still getthe same results.2:07:44 Begin Action: Detection12:07:44 SQL Server version already installed: 7.00.62312:07:44 Previous Install SQL Path: C:MSSQL712:07:44 Previous Install SQL Data Path: C:MSSQL712:07:44 End Action Detection12:07:44 Begin Action: ODBCLocked12:07:44 End Action ODBCLocked12:07:44 GetDefinition returned: 112:07:44 Previous SQL Server ProductType: MSDE [0x4]12:07:44 This combination of Package and Operating System allows a fullproduct install.can anyone think of anything here..what else could be causing the server to think there is a previousversion of SQL 7 on this box!!!?
I get an error when trying to install the SQL Native Client. It says it cannot find the installation package and to use a valid copy of 'sqlncli.msi'. I've downloaded the Express setup twice and get the same error from both of them.
I'm attempting this in a VMWare session setup for Windows 2K, Advanced Server. I am trying to test my installation and setup procedures. This is not a production setup, just install testing and documentation. I have allocated only 272MB to the VMWare session, which is why the system doesn't meet the recommended settings.
Any help would be greatly appreciated.
Below is the Summary.txt output file.
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows 2000 Advanced Server Service Pack 4 (Build 2195)
Time : Wed May 03 09:54:23 2006
CPCWIN2KVM1 : The current system does not meet recommended hardware requirements for this SQL Server release. For detailed hardware requirements, see the readme file or SQL Server Books Online.
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Setup Support Files (English)
Error : An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'.
Error String : An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'.
I found this script some where on internet..i am not sure what it does and how to i solve the problem because my friend has already run the script and i donno how to get back to the original configuration.
/* this script works on a database that is a copy of pubs. I created this database easily with DTS This only works on SQL Server 7 databases */
/* NOTE: This script will truly corrupt a database. It should not be run on ANY real database. It is only for simulating corruption for training purposes.
*/ sp_configure allow, 1 go reconfigure with override go update sysindexes set FirstIAM = 1234 where id = OBJECT_ID('roysched') go sp_configure allow, 0 go reconfigure with override go
How to sovlve the issue after the corrupt is done...how do i modify the info back to original..
Are there any other process or script that i can simulate to corrupt the databse and solutions pertaining to the same..i would like to experiment and then see how it goes and how quickly i can solve...
The ldf file of a db was deleted by mistake. This was done whilst the SQL Server Service was still running. The db was not detached cleanly. I ran sp_detach_db on the db and tried re-attaching but got the error message: "Database [dbname] cannot be opened because some of the files could not be activated". Subsequently I have tried creating a new db called the same as the old one. Stopping the MSSQL service, copying over the mdf and re-starting the service. The db still comes up as suspect and the error log shows "Device activation error. The physical file name 'D:LogsETERBK_Log.LDF' may be incorrect". I have tried copying over the new ldf to the correct location but the same message appears. I am not interested in getting the data back but would like to get back the stored procedures. Can anyone help this is urgernt?
Have a corrupt SQL database that I am unable to repair using any of the repair options with DBCC CHECKDB. Below is the output from the repair_allow_data_loss option.
I can't seem to figure out how to go about fixing this. Any takers?!
Server: Msg 8946, Level 16, State 12, Line 2 Table error: Allocation page (1:24264) has invalid PFS_PAGE page header values. Type is 0. Check type, object ID and page ID on the page. Server: Msg 8921, Level 16, State 1, Line 1 CHECKTABLE terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors. Server: Msg 8939, Level 16, State 1, Line 1 Table error: Object ID 0, index ID 0, page (1:24264). Test (m_headerVersion == HEADER_7_0) failed. Values are 0 and 1. Server: Msg 8939, Level 16, State 1, Line 1 Table error: Object ID 0, index ID 0, page (1:24264). Test ((m_type >=DATA_PAGE && m_type <= UNDOFILE_HEADER_PAGE) || (m_type == UNKNOWN_PAGE && level == BASIC_HEADER)) failed. Values are 0 and 101. Server: Msg 8939, Level 16, State 1, Line 1 Table error: Object ID 0, index ID 0, page (1:24264). Test (m_freeData >= PAGEHEADSIZE && m_freeData <= (UINT)PAGESIZE - m_slotCnt * sizeof (Slot)) failed. Values are 0 and 8192. Server: Msg 8939, Level 16, State 1, Line 1 Table error: Object ID 0, index ID 0, page (1:24264). Test (m_headerVersion == HEADER_7_0) failed. Values are 0 and 1. Server: Msg 8939, Level 16, State 1, Line 1 Table error: Object ID 0, index ID 0, page (1:24264). Test ((m_type >=DATA_PAGE && m_type <= UNDOFILE_HEADER_PAGE) || (m_type == UNKNOWN_PAGE && level == BASIC_HEADER)) failed. Values are 0 and 101. Server: Msg 8939, Level 16, State 1, Line 1 Table error: Object ID 0, index ID 0, page (1:24264). Test (m_freeData >= PAGEHEADSIZE && m_freeData <= (UINT)PAGESIZE - m_slotCnt * sizeof (Slot)) failed. Values are 0 and 8192. Server: Msg 8998, Level 16, State 1, Line 1 Page errors on the GAM, SGAM, or PFS pages do not allow CHECKALLOC to verify database ID 7 pages from (1:24264) to (1:32351). See other errors for cause. Server: Msg 8939, Level 16, State 1, Line 1 Table error: Object ID 0, index ID 0, page (1:32352). Test (m_headerVersion == HEADER_7_0) failed. Values are 0 and 1. Server: Msg 8939, Level 16, State 1, Line 1 Table error: Object ID 0, index ID 0, page (1:32352). Test ((m_type >=DATA_PAGE && m_type <= UNDOFILE_HEADER_PAGE) || (m_type == UNKNOWN_PAGE && level == BASIC_HEADER)) failed. Values are 0 and 101. Server: Msg 8939, Level 16, State 1, Line 1 Table error: Object ID 0, index ID 0, page (1:32352). Test (m_freeData >= PAGEHEADSIZE && m_freeData <= (UINT)PAGESIZE - m_slotCnt * sizeof (Slot)) failed. Values are 0 and 8192. Server: Msg 8998, Level 16, State 1, Line 1 Page errors on the GAM, SGAM, or PFS pages do not allow CHECKALLOC to verify database ID 7 pages from (1:32352) to (1:40439). See other errors for cause. DBCC results for '8602955'. The system cannot self repair this error. The system cannot self repair this error. The system cannot self repair this error. The repair level on the DBCC statement caused this repair to be bypassed. The system cannot self repair this error. The system cannot self repair this error. The repair level on the DBCC statement caused this repair to be bypassed. The system cannot self repair this error. The system cannot self repair this error. The system cannot self repair this error. The repair level on the DBCC statement caused this repair to be bypassed. CHECKDB found 8 allocation errors and 3 consistency errors not associated with any single object. DBCC results for 'sysobjects'. There are 1395 rows in 27 pages for object 'sysobjects'. CHECKDB found 8 allocation errors and 3 consistency errors in database '8602955'. DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Hi Guys, I have had SQL Server Express and Sql Server Management Studio Express installed on my machine for some time and recently tried to install a trial of SQL Server 2005 as well. (Yes, I'm migrating from Visual Studio Express to Visual Studio Professional, just as in tended!) Everything went fine except that nothing seemed to be installed. I searched in all the obvious places - both on the Start/Programs menu and on the hard-drive: nothing. A check under Add/Remove Programs showed that Sql Server 2005 Express was installed, but called SQL Server 2005. So after a number of retries in which the install program kept saying that there was nothing to install, I selected every option under Advanced in the intall process. This resulted in stuff being installed and I now have SQL Server 2005 running on my machine, but no SQL Server Manager icon. My questions are:
Where can I find the SQL Server Manager executeable? Has anyone installed SQL Server Express, SQL Server Mangement Studio Express, SQL Server 2005 and SQL Server Management Studio on a single machine successfully? If so, what order did you install them in? (I'm planning on uninstalling everything SXQL Server related and starting again.) Thanks very much for your help. Regards Gary
I had installed a third-party software on my server and that corrupted my Master DB. Over the weekend when we bought SQL server down, we could not bring it back up. I had to re-install SQL server and then restore all my databases from the backup. Is there a better way of doing this??? Curiously Someone who calls himself a DBA
I have a strange problem with one of the jobs created through a maintenace plan. The idea is that every 2 hours a transaction log backup is created and backups older than 2 days should be removed. This worked for several months without a problem, but suddenly today the job reports failed as status.
I looked into jobhistory but all I got is the following message:
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Strange enough reports the sqllog that the t-log has been backed up succesfully. The files are on disk and I can restore them without a problem.
I am working in a test environment where I need to corrupt a database for test purpose/R&D. After corrupting the database, I ran the DBCC CHECKDB (pubs, repair_fast) and then DBCC CHECKDB (pubs, repair_rebuild) commands. But DBCC is not fixing the corrupt database.
My question is why DBCC is not fixing the corrupted Database? Is that a limitation of DBCC or is there any other way/command or tool to fix the corrupted database other then restoring from the previously backed up file.
The following are the steps that I followed to corrupt the database: I used the following script (available in the script section of www.swynk.com) to corrupt the pubs database.
sp_configure allow, 1 go reconfigure with override go update sysindexes set FirstIAM = 1234 where id = OBJECT_ID('roysched') go sp_configure allow, 0 go reconfigure with override go
Then I did a select * from roysched. I got the error: Server: Msg 5180, Level 22, State 1, Line 1 Could not open FCB for invalid file ID 53764 in database 'pubs'. Table or database may be corrupted.
The pubs database got corrupted. Now, I want to fix this error. So I set the pubs database to single user mode and ran the DBCC command : DBCC CHECKDB (pubs, repair_fast) that doesn't help so I ran the DBCC CHECKDB (pubs, repair_rebuild) command.
I got big DBCC output. I doesn't seems to fix the pubs database. When I did a select * from roysched again it gave the same corruption error.
Hi, One of my tables got corrupt and it is not possible to bring down the Database into Single user mode to run the dbcc to repair it. Is there any other way that I could correct.
Thanks Cynthia
Msg 8978, Sev 16: Table Corrupt: Object ID 901630305, index ID 8. Page (5:572498) is missing a reference from previous page (8:98777). Possible chain linkage problem. [SQLSTATE 42000] Msg 8928, Sev 16: Object ID 901630305, index ID 8: Page (8:98777) could not be processed. See other errors for details. [SQLSTATE 42000] Msg 8976, Sev 16: Table Corrupt: Object ID 901630305, index ID 8. Page (8:98777) not allocated or corrupt. Parent (5:335525) and previous (5:572497) refer to it. [SQLSTATE 42000] Msg 8944, Sev 16: Table Corrupt: Object ID 901630305, index ID 8, page (8:98777), row 38. Test (VarColOffsets + (int)(sizeof (class VarColOffset) * nVarCols) <= (nextRec - pRec)) failed. Values are 525 and 26. [SQLSTATE 42000]
What is the best approach to repairing a corrupt table? I received the following error from last night's maintenance. (SQL 6.5)
Thanks, Kevin
[2] Check Data Allocation... WARNING: Database AHSDATA is currently being used by 1 user(s). This may cause spurious problems to be reported.
The following errors were found:
Table Corrupt: object id does not match between extent in allocation page and Sysindexes; check the following extent: alloc pg#=247552 extent#=247720 object id on extent=-1175060352 (object name = -1175060352) object id in Sysindexes=1329491865 (object name = PS_AHS_RETIRE_2000)
Table Corrupt: Index id on extent should be 0; check the following page and ids: alloc page=247552 extent=247720 index id on extent=200
Table Corrupt: Extent structures are linked incorrectly; check the following extent: alloc pg#=247552 extent#=247720 previous extent# on this extent=-1 previous extent should be=247712
Table Corrupt: Object id wrong; tables: alloc page 247552 extent id=247720 l page#=247720 objid in ext=-1175060352 (name = -1175060352) objid in page=1329491865 (name = PS_AHS_RETIRE_2000)objid in sysindexes=1329491865 (name = PS_AHS_RETIRE_2000) ** Execution Time: 0 hrs, 10 mins, 50 secs **
[3] Update Statistics... [Microsoft SQL-DMO] Error 605: [SQL Server] Attempt to fetch logical page 247792 in database 'AHSDATA' belongs to object 'PSPNLDEFN', not to object 'PS_AHS_RETIRE_2000'. [Microsoft SQL-DMO] Error 10025: [DB-Library] Possible network error: Write to SQL Server Failed.
I am receiving an Msg 2540 on a database when I perform the DBCCs. It looks like the indexes on this one table got corrupt. I know this because when I perform the DBCCs with the noindex option then I do not get any errors. I tried to drop and recreate the indexes (two indexes - one clustered and one unique) but to no avail. The dbccs continued to produce the error.
If someone has any ideas please respond. This is a prodn problem and so any input would be greatly appreciated. Thanks again Kiran
I have been having problems with the SQL 7 server when temporary tables are being created, so I ran a DBCC checkdb against tempdb, and this is what came back. When I try to run the dbcc with repair_allow_data_loss it says the database must be in single user mode. This option is not allowed in tempdb. So now what? Does any one have any suggestions?
Server: Msg 8999, Level 16, State 1, Line 1 Database tempdb allocation errors prevent further CHECKDB processing. Server: Msg 8906, Level 16, State 1, Line 1 Page (1:109) in database ID 2 is allocated in the SGAM (1:3) and PFS (1:1), but was not allocated in any IAM. PFS flags 'IAM_PG MIXED_EXT ALLOCATED 0_PCT_FULL'. Server: Msg 8905, Level 16, State 1, Line 1 Extent (1:1000) in database ID 2 is marked allocated in the GAM, but no SGAM or IAM has allocated it. Server: Msg 8905, Level 16, State 1, Line 1 Extent (1:1016) in database ID 2 is marked allocated in the GAM, but no SGAM or IAM has allocated it. DBCC results for 'tempdb'. CHECKDB found 3 allocation errors and 0 consistency errors not associated with any single object. CHECKDB found 3 allocation errors and 0 consistency errors in database 'tempdb'. repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (tempdb ). DBCC execution completed. If DBCC printed error messages, contact your system administrator.
I have a problem for dropping a table from my database and I got the error message: ""Extent chain for object 736005653 is not correctly linked." The problem indicates table corrupt on the database from DBCC checknewalloc. Instead of reloading the database from a dump, do you have anyway to repair the damage table or drop it.
