I'm trying to access a group of rows in a data source in my script
component (transformation). Currently im using the connection manager
in the script component, acquire the connection, and issue a query
command to get the data. This will happen on every rows being pass to
the script component from the data source. Is there a better way to
access the a group of rows from the data source?
When I put a sqldatasource in my page and want to configure it and add a new connection to it I recieve this error : "object reference not set to an instance of an object" . Do you have any idea about solving this problem. please help me Thanks
View 5 Replies View RelatedI am trying to create a MS Access datasource to use it in a IS dataflow. I've done the following things:
1.I've created an ODBC datasource - System DSN, pointing to the Access database.
2.I've created an ODBC connection manager pointing to the ODBS datasource that I created in the previous step.
3.I've created a DataReader Source that uses as its Connection Manager the connection manager that I created in the previous step.
I get the following error message: "Cannot acquire a managed connection from the run-time connection manager." What can I do to solve this error?
Pedro Martins
I tried to write a CLR stored procedure using C# in SQL 2005 to access an Access
database.
When I use the OleDbConnection class in System.Data, the procedure throws SecurityException at runtime.
Output as following:
System.Security.SecurityException: Request for the permission of type 'System.Data.OleDb.OleDbPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.OleDb.OleDbConnection.PermissionDemand()
at System.Data.OleDb.OleDbConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at Dbbest.Data.BulkStuff.bulkcopy(String source_oledb_connection_string, String source_table, String destination_table, Int32 batchSize, Int32 notifyAfter)
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.OleDb.OleDbPermission
The Zone of the assembly that failed was:
MyComputer
Hi all,
Please advise which kind of connection should be establish from excel 95 to MS SQL Server.
From my thought, I understand that the connection depends on Windows version rather than excel version.
Thus, I just think that there will not be any issue connecting to SQL Server from Excel 5.0a.
Kindly advise if there is any addtional point to concern/consider further.
What could be issue connecting to SQL Server 2005 from Excel 5.0a.
Thank you very much
I am running Visual Studios 2005 enterprise edition and I am creating a mobile application to keep track of some receipts. The problem I'm currently having is that even though I can connect to the MS Access Database with Server Explorer that I'll be aquiring data from; Everytime I attempt to use the Data Configuration Wizard to add a new data source that namely the database I get this error message:
The new connection uses a data provider that is not supported. (end of message)
There is no username or password necessary to access this database and it is an Access 2003 database.
Any help would be greatly appreciated.
Hello,
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Please advice.
Thank you.
Hi,
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
Appreciate a help.
Gulden
Hi,
How can I set a variable value in a Script Component?
This syntax does not work:
Dts.Variables("myVariable").Value
Pls help.
Thanks
I have a component who's OnPreExecute event handler contains a Script Task. I would like to use this Script Task to access the component's properties. Can anyone provide script examples for doing this if this is possible?
View 6 Replies View RelatedI have a set of comma separated variables in a Script Component list. I want to access them in Script code and use them to build string in the code.
View 9 Replies View RelatedMy script component defines a (DT_WSTR, 450) output column named keyword. How can I access its length within the script, instead of hard-coding 450 as a constant?
My feeble attempts to tease this out through Visual Studio got me this far:
Output0Buffer.keyword.GetType.GetProperty("Length").GetValue(
but now I'm stuck. Also, if it matters, this is an asynchronous transformation component.
Thanks!
Hi all,
I have to chose the best Data Access Component with SQL Server Express edition.
The application that I am going to develope is a simple one but the speed should be as much as possible.
Any help would be highly appreciated.
Thanks & regards
Arun Gupta
Hi,
I've created a stand alone custom dataflow component in VB and I need to set up the connection to the Input and Output components and instantiate it. The only way I've seen this done is to create an entire package and Task then use the TaskHost wrapper object to instantiate the Mainpipe (IDTSPipline90 interface) so that you can create the IDTSPath90 interface and setup the connection to the input and output components...
After all that, all that I would like to know is whether it is possible to instantiate the mainpipe interface without creating a package programmatically? I've seen something Darren Green put in an answer to a thread, about accessing the Mainpipe interface in the UI, to the effect that you can access it through IServiceProvider using the interface IDTSPipelineEnvironmentService - I think that's it... But I'd like to know if there is a more straightforward route to instantiating and accessing the Task or data flow directly?
Thanks in advance,
Will.
I've followed all of the instructions in Donald Farmer's book to create a proxy to access my SSRS web service but keep getting the following error..."Type ReportingServices2005 is not defined"....on my Dim statement for the new ReportingServices2005.dll I created and all my methods (ListSubscriptions, etc.) are similarly flagged.
My brain is not yet .Net compliant so I probably screwed this up somewhere.
I executed the following....
wsdl /language:VB http://ssrs_servername/reportserver/reportservice.asmx
sn €“k "C:Program FilesMicrosoft Visual Studio 8SDKv2.0Bin
s.snk"
vbc /target:library /out:ReportingServices2005.dll /keyfile:"C:Program FilesMicrosoft Visual Studio 8SDKv2.0Bin
s.snk" "C:Program FilesMicrosoft Visual Studio 8SDKv2.0BinReportingService.vb"
gacutil /if "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727ReportingServices2005.dll"
then I added a reference to the System.Web.Services to my project (script component) and added the import statement to the script.
Is there something I'm missing??
Hello, I am trying to configure a Script Component as a data source. Although this should be a simple exercise, I am running into a problem.
My control flow contains a Foreach Loop with a file iterator. The Directory Expression of the Foreach Loop Editor is supplied by an expression mapped to a package level variable called inputdirectory. The FileNameRetrieval Expression is mapped to a package scoped variable called filename.
My data flow is encapsulated by the Foreach Loop, and contains a Script Component as Source for the Data Flow Source, and a Flat File for the Data Flow Destination. The contents of the Script Designer are as follows:
Code Block
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports System.IO
Public Class ScriptMain
Inherits UserComponent
Dim thisFileDate As Date
Dim thisFileName As String
Dim thisFilePath As String
Public Overrides Sub CreateNewOutputRows()
thisFileName = ReadOnlyVariables("filename").Value.ToString()
thisFilePath = ReadOnlyVariables("inputdirectory").Value.ToString()
thisFileDate = File.GetCreationTime(thisFilePath & "" & thisFileName)
FileSpecBuffer.AddRow()
FileSpecBuffer.FileName = thisFileName
FileSpecBuffer.FullPath = thisFilePath & "" & thisFileName
FileSpecBuffer.CreateDate = thisFileDate
End Sub
End Class
When I debug the package, I get the following error:
The collection of variables locked for read access is not available at this point.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponent.get_ReadOnlyVariables()
at ScriptComponent_67311120e6eb4162a3ea1f70847f04de.ScriptMain.CreateNewOutputRows()
at ScriptComponent_67311120e6eb4162a3ea1f70847f04de.UserComponent.PrimeOutput(Int32 Outputs, Int32[] OutputIDs, PipelineBuffer[] Buffers)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
My googlefu fails me at reconciling this. I have read various posts about changing the line ReadOnlyVariables("filename").Value to ReadWriteVariables("filename").Value, and handling the buffer assignment in PostExecute. The problem is that all examples shown are either for Script Component as Destination or Script Component as Transformation. I have tried playing with the Custom Properties in the Script Commponent set the ReadOnlyVariables and ReadWriteVariables, using a PreExecute method, a PostExecute method, all with different errors returning. I'm at a loss here. Could anybody provide me with a simple working example so that I can correctly populate my output buffer in the context of Script Component as Source?
I fully understand that I could just run a Script Task Using System.IO.Directory, and System.IO.File, but I really want to make this package work in the manner I've described. Any help would be appreciated.
Thanks,
John T
In a Data Flow, I have the necessity to use a SSIS variable of type €œObject€? inside Script Component and assign to it the content of 'n' variables of string type.
On exiting from the script the variable of type object should contain something like in the following lines:
AAAAAAAAAAAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBBBBBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDDDDDDDDDDD
€¦€¦€¦€¦€¦€¦€¦.
€¦€¦€¦€¦€¦€¦€¦.
On exiting from the data flow I will use the variable of type Object in a Script Task, by reading each element in a cyclic fashion.
Is there anyone who have experienced something like this? Could anyone provide any example of that?
Thanks in advance!
Hi all
I'm into a project which uses a lot of views for joining 2 or more tables. Using the MERGE component in SSIS will be a huge effort coz it only has 2 inputs and I gotta SORT the input too.
Isnt it possible to have a VIEW like component that joins more than 2 tables and DOESNT need sorting??
(I've thought about creating views in database engine but it breaks my data floe in SSIS and is'nt a practical solution)
I am writing a custom dataflow transformation component and I need to get the name of the preceeding component.
I have been trying to find a way to get a reference to the Package object, MainPipe object or IDTSPath90 object (connecting to the IDTSInput90 of my component) from my component because I think from there I can get to the information I want.
Does anyone have any suggestions?
TIA . . . Ed
I am on a learning project where I need to take Inputs to the Script Component from an OLE DB Source. Then I am supposed to be able to access these input columns in my Script. My Script code is in VB.NET.
My questions is:
1) How do I access these input variables in my script?
2)How to assign outputs to the output columns which will go to two separate OLE DB Destinations?
Thanks,
MissGee
No idea where this bug crept in from. Have been using SSIS for 1.5 years now without hitting this problem.
I had a script component opening an XML document and parsing it using XPATH. I added some code that uses StreamReader / Streamwriter (closing one stream before starting the other). The code works without issue in my C# app.
And it ran without issue 2-3 times in SSIS. Then suddenly after running my package again, the script component says it completes successfully, yet nothing happens. I set a breakpoint on the first line of code - it never hits it. I add a msgbox as the first line of code - and it never displays.
I then close my package / exit out of ssis ... and then re-open it. When i open my script component, all of my code is GONE. All references that I added are gone.
I tried adding the streamreader/writer process to a dll I created from my c# app ... and added the DLL to the package -- same result.
I can reproduce this on 2 different computers.
Anyone experience this problem ? Any idea how to stop it ? Or debug it ?
Here is a slimmed down code sample of what causes the error :
Public Class ScriptMain
Public Sub Main()
Try
Dim xmlDoc As New XmlDocument
xmlDoc.Load("c:ulkasync_86281519_20070628045850225_4.xml")
MsgBox("xmlLoaded") --this doesn't display once the package starts "acting up"
Catch ex As Exception
MsgBox(ex.Message)
UpdateXML("c:ulkasync_86281519_20070628045850225_4.xml", ex.Message)
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub UpdateXML(ByVal fileName As String, ByVal message As String)
Try
Dim invalidChar As String = message.Trim().Substring(message.Trim().IndexOf("0x"), 4)
Dim rd As StreamReader = New StreamReader(fileName)
Dim xml As String = rd.ReadToEnd()
Xml = Xml.Replace(invalidChar, String.Empty)
xml = xml.Replace("", String.Empty)
xml = xml.Replace("<![CDATA[<![CDATA[", "<![CDATA[")
xml = xml.Replace("]]>]]>", "]]>")
MsgBox("replaced")
rd.Close()
Dim wr As StreamWriter = New StreamWriter(fileName)
wr.Write(xml)
wr.Close()
Dim xdoc As XmlDocument = New XmlDocument()
xdoc.Load(fileName)
Catch ex As Exception
UpdateXML(fileName, ex.Message)
End Try
End Sub
End Class
I working on a form using an SQL DataSource. I am going to add a where clause. In that where clause a value from a label will be passed from the user.
How do I pass to the HTML Source the label value from the where clause. The value can change from user to user.
Sample below:
SELECT [KeyRolesID], [KeyRolesDesc] FROM [KeyRoles] WHERE ([JobCodeFamily] = @JobCodeFamily).
I want to replace the @JobCodeFamily which is currently coded with a value from the Sql DataSource in the design form with a label value entered by the user.
Hi, guys
I used an exported wcf service as a web service, try to use it as the reporting datasource,
[OperationContract]
DataSet GetTestReportData();
the app.config in the service host:
<configuration>
<appSettings>
<add key="BaseReportingAddress" value="http://localhost:8999/ReportHandlerService"/>
</appSettings>
<system.serviceModel>
<services>
<service name="Reporting_Handler.ReportHandlerService">
<endpoint address="http://localhost:8999/ReportHandlerService"
binding="basicHttpBinding"
behaviorConfiguration="ReportingServiceBehavior"
contract="Reporting_Handler.IReportingHandler"/>
</service>
</services>
<behaviors>
<behavior name="ReportingServiceBehavior">
<metadataPublishing
enableGetWsdl="true"
enableMetadataExchange="true"
enableHelpPage="false">
</metadataPublishing>
</behavior>
</behaviors>
I set the datasource type as xml and the connection string to http://localhost:8999/ReportHandlerService, the query string for dataset is
<Query>
<SoapAction>
http://tempuri.org/IReportingHandler/GetTestString
</SoapAction>
<Method Namespace="http://tempuri.org/IReportingHandler/"
Name="GetTestString">
</Method>
</Query>
but it doesn't work, I tried use a pure asp.net web service and it works. can anyone help me to set the connecting string for datasource and query for dataset when it using wcf as the web service? Thanks in advance.
bruce
Hi All,
I have a question about the datasource that we create on the Report Manager. What is it used for? In the below connection string which is given in the "Connection String" text box of a datasource link:
"Data Source=ProdServer;Initial Catalog=Northwind"
What is this datasource used for? Is it used only to use the ReportServer database or even our queries incorporated in the RDL files will be run against this datasource? I think the latter should not happen because while creating RDL files also, we provide a connection string to run the stored procedures against that datasource.
Please let me know about the same.
Thanks a lot and let me know if the question is not clear.
Manoj Deshpande.
1) We are writing a custome Source component for Oracle with OCI calls, Could some one please let me know how to Enable Error Handling for the Same,
2) Is it possible to write Custome Error Handeling Component for SSIS? if yes could you please help me on how to write it.
Thanks in advance.
Can someone help me with this? For the life of me, I cannot figure out why I recieve this error: Procedure or function usp_ContactInfo_Update has too many arguments specified.Here is my code: <asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"SelectCommand="usp_ContactInfo_Select" SelectCommandType="StoredProcedure" UpdateCommand="usp_ContactInfo_Update"UpdateCommandType="StoredProcedure"><UpdateParameters><asp:Parameter Name="Division" Type="String" /><asp:Parameter Name="Address" Type="String" /><asp:Parameter Name="City" Type="String" /><asp:Parameter Name="State" Type="String" /><asp:Parameter Name="Zip" Type="String" /><asp:Parameter Name="Phone" Type="String" /><asp:Parameter Name="TollFree" Type="String" /><asp:Parameter Name="Fax" Type="String" /><asp:Parameter Name="Email" Type="String" /><asp:Parameter Name="Res" Type="Boolean" /><asp:Parameter Name="Res_Rec" Type="Boolean" /><asp:Parameter Name="Com" Type="Boolean" /><asp:Parameter Name="Com_Rec" Type="Boolean" /><asp:Parameter Name="Temp" Type="Boolean" /><asp:Parameter Name="Temp_Rec" Type="Boolean" /><asp:Parameter Name="Port" Type="Boolean" /><asp:Parameter Name="Land" Type="Boolean" /><asp:Parameter Name="Drop" Type="Boolean" /></UpdateParameters><SelectParameters><asp:ProfileParameter Name="DivID" PropertyName="Division" Type="String" /></SelectParameters></asp:SqlDataSource>Here is my Stored Proc:ALTER PROCEDURE dbo.usp_ContactInfo_Update @Division varchar(1),@Address varchar(50),@City varchar(50),@State varchar(2),@Zip varchar(10),@Phone varchar(20),@TollFree varchar(20),@Fax varchar(20),@Email varchar(50),@Res bit,@Res_Rec bit,@Com bit,@Com_Rec bit,@Temp bit,@Temp_Rec bit,@Port bit,@Land bit,@Drop bit/*(@parameter1 int = 5,@parameter2 datatype OUTPUT)*/AS/* SET NOCOUNT ON */ UPDATE tblDivisionSET Division = @Division, Address = @Address, City = @City, State = @State, Zip = @Zip, Phone = @Phone, TollFree = @TollFree, Fax = @Fax, Email = @Email,Residential = @Res, Residential_Recycling = @Res_Rec, Commercial = @Com, Commercial_Recycling = @Com_Rec, Temp = @Temp, Temp_Recycling = @Temp_Rec, Portable_Restrooms = @Port, Landscaping = @Land, Drop_Off_Center = @DropWHERE (Division = @Division) RETURNAny Help is greatly appreciated!
View 2 Replies View RelatedI have this web store that I have been creating. When a customer goes to check out, he has to log in, then he is redirected to a page where he can view/add/or edit shipping and billing address. I have based all the sql statements on the profile username, adding records and retrieving them works just fine. When I go to change something in the info it uses an sql statement that updates based on "Where AccountUserName = @AccountUserName", I have @AccountUserName set to Profile("Username"). Keep in mind this works fine for adding new or bring up current records. I even put in code in the updated event for the sql data source to post a msgbox telling me how many rows were affected, it says 1 even though I dont see any change in the data. What am I doing wrong here, it's driving me nuts, its just a very simple update.
View 2 Replies View RelatedMy god.All I want to do is post the contents of a web form to a database sql express 2005 or access using C#. Why can I find nothing for this very simple process online?Can you tell I am totally frustrated? So lets say i have a few text fields and I want to click submit and have that entered into a table. I use C# for code behind. So I can do basic C# programming and I can to webforms with visual web developer 2005 dragging and dropping for textboxs and a button to the aspx page. But then the mystery begins for me. How the hell do I simple post that form data to the table. I understand connection string basics. I aslo can design and create tables. But tying this all together is becoming a problem. I don't want to use gridview formview detailview or any of that canned UI stuff. I also don't understand VB and when I see VB examples they only cloud my already cloud ASP.NET world. Please help by posting examples, and maybe some links or books to add to my newbish collection. Thanks,Frank
View 3 Replies View RelatedLets say I have a Sqldatasource that uses the following SelectCommand="SELECT category,name FROM table". How do I get the value on category from my datasource in code behind if I know that my selectcommand always will return one row? Can I write something like datasource.items["category"].Value? Thanks for your help!
View 1 Replies View RelatedHi there,
I'm using a Repeater at the moment which is bound to a SQLDataSource. I expect much load on that Website, should I choose another DataSource? Which other DataSource is better if it's about Performance?
I read some stuff about the SQLAdapter and a DataSet.. is that better in performance? Why is it better?
What about LinQ?
Thanks a lot for any clarification.
I am using a SQLDatasource to populate a dataview as illustrated below. I run into a problem when I search for a "LastName" that includes an (') Apostrophe ( e.g. O'Reilly) . Searchin for the whole name there is no problem, but when I search for simply O, or O' I get errors.
I am not sure ...when to address names with an apostrophe...
1) On insertion to the database (using a "Replace(LastName, "'", "''") 2) or after they have been entered and they are to be searched for.
If scenario 1, can anyone provide the best way to do this...If scenario 2, how would that be worked into the SQL Datasource code below....
I have tried several variations with the times SQL Datasource to no avail....
I would appreciate any help !
Thanks !
<asp:SqlDataSource ID="SqlDataSource1" runat="server"ConnectionString="<%$ ConnectionStrings:ClinicTest2ConnectionString1 %>"
SelectCommand="SELECT [PatientID], [Accession], [FirstName], [LastName], [Address1], [City], [strddlPatientState], [ZIP], [DOB] FROM [ClinicalPatient] WHERE [LastName] LIKE @LastName ORDER BY [LastName],[FirstName]ASC">
<SelectParameters>
<asp:QueryStringParameter Name="LastName" QueryStringField="NameSearch_Result" />
</SelectParameters>
</asp:SqlDataSource>
I have a single variable to be utilitized in my SQL Where clause...
Select *FROM projectsWhere project_id = @id
How do I use this c# variable in the datasource?
string TableID; TableID = "192.AB";
I know this is simple, but I figured I'd ask. I don't want to do a work around , like a hidden textbox with the value assigned, and then link the datasource to the tb control, seems extremely hackish.
Hi
When I try to configure a SQL datasource and I use a Microsoft SQL Server datasource I get a blank drop down list for server name. My aspnetdb is available in SQL Server 2005 and I can log into it through management studio, and the service is started. I am also using Vista Ultimate.
Is there any other configuration I need to do for Visual Studio 2008 to see the SQL Server instance?
Thanks
Kwis