Access Rows In Oracle
Jun 8, 2008Is there a way to access a particular row of a column in sql
lets say we have a table
A | B| C|
---------
1 | 2 | 3
3 | 5 | 6
And we want to access the 5 in column B. Is there a way to do that?
Is there a way to access a particular row of a column in sql
lets say we have a table
A | B| C|
---------
1 | 2 | 3
3 | 5 | 6
And we want to access the 5 in column B. Is there a way to do that?
we recently got a scenario that we need to get the data from oracle tables which is installed on third party servers. we have sqlserver installed on ourservers. so they have created a DBLINK in oracle server to our sqlserver and published the DBLINK name.
what are the next steps that i need to follow on my sqlserver in order to access the oracle tables ?
Access Connection
create a new Connection Manager by right-clicking in the Connection Managers section of the design area of the screen. Select New OLE DB Connection to bring up the Configure OLE DB Connection Manager dialog box. Click New to open the Connection Manager. In the Provider drop-down list, choose the Microsoft Jet 4.0 OLE DB Provider and click OK.
Browse to the Access database file and connection set up---all good!!!
Dataflow task
Add an OLE DB Source component
Double-click the icon to open the OLE DB Source Editor. Set the OLE DB Connection Manager property to the Connection Manager that I created . Select Table from the Data Access Mode drop-down list.
I cannot see the tables set up as set up as pass-through table types to a Oracle 9i db
Any ideas please help
thanks in advance
Dave
We need to insert data/rows from a SQL Server 2014 database into MS Access database. The problem is, there are so many columns (100+) in the table and there are so many insert transactions of this kind (from different tables) that it is not very easy to write the code in VB.NET that lists all column names.
Both the Access and SQL Server tables have the same number of columns and the equivalent data types, so inserting is not really the problem. It's just that is there a way to do an insert statement in T-SQL that does not name all the columns?
hi everyone ,How are you all?
i'm working on sql DTS to transfer data from oracle to MS SQL2000 i did the transfer but i need to delete transfered data from oracle in DTS How i could do that?
regards,
Firas azzi
I have 53 tables I need to load from Oracle into SQL Server as part of a migration to a new system. All but three of the tables load perfectly. Three tables load approximately 95% of the rows. The problem tables have between 300,000 and 1,300,000 rows. Oddly some of the tables that migrate successfully have more than 10,000,000 rows. What to check to determine why these tables are failing to load?
View 2 Replies View RelatedDoes anyone know if I can have a MS Access project with Oracle backend ?
I know it's a breeze with MS SQL backend !
Thanks in advance !
Ivan
Hi all,
SQL Server 2005 SP2
Windows XP Pro SP2
Oracle 10g Client 10.2
Oracle Data Access Components 10.2 VB6
Oracle Rdb 7.1 (not Oracle RDBMS).
I trying to access a remote Oracle Rdb database via a linked server in SQL Server 2005 management studio but having no luck. The remote database is accessed via an Oracle alias in TNSNAMES.ORA called my_oledb (see below) and I know it works ok becuase I'm able to access the remote database via VB6 (ADODB) using a very simple app whose connection string looks like this...
con.ConnectionString = "Provider=OraOLEDB.Oracle.1;User ID=someusername;
Password=topsecret;Data Source=my_oledb"
I got this example VB appication off the net but have to admit I'm not sure of the difference between
OraOLEDB.Oracle.1 & OraOLEDB.Oracle.
The alias in TNSNAMES looks like this...
my_oledb =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (Host = spike) (Port = 1527))
)
(CONNECT_DATA = (SERVICE_NAME = oci_oledb)
)
)
I can also TNSPING this alias without any probems.
My SQL server linked server is setup as follows.
exec sp_addlinkedserver
@server = 'MFP2',
@srvproduct='Oracle',
@provider = 'OraOLEDB.Oracle.1',
@datasrc = 'my_oledb'
exec sp_addlinkedsrvlogin
@rmtsrvname='MFP2',
@useself='false',
@locallogin='sa',
@rmtuser='******',
@rmtpassword='******'
Using both openquery and four part naming (?) I get the following errors
select job_title from mfp2...jobs
OLE DB provider "OraOLEDB.Oracle.1" for linked server "mfp2" returned message "ORA-01017: invalid username/password; logon denied".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle.1" for linked server "mfp2".
There are no schemas in the Oracle database so I've just used three dots between the linked server and the table name.
Again I know this syntax works becuase I have used it sucessfully with ODBC drivers.
select * from openquery(mfp2,'select * from jobs')
OLE DB provider "OraOLEDB.Oracle.1" for linked server "mfp2" returned message "ORA-01017: invalid username/password; logon denied".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle.1" for linked server "mfp2".
The passwrods are correct on the Oracle database as these are the ones used in the VB6 application.
Trying to expand the catalogue also causes management studio to hang.
Anyone spot the obvious mistake?
I did read on the net a while ago that registry entries might be rquired on the PC/server, is this still necessary?
Thanks in advance
Dave
Hi all,
I have been reading some topics on "slow Oracle connections", but I have not found an answer for my question yet.
The problem is that I am extracting data from a Oracle database to Raw files (to import into our DWH later on).
For one table this takes more that 1 hour! I find this to be very slow, but maybe I am expecting too much speed?
Can anyone tell me how long it should take to download 10 million rows from Oracle to Raw file (no transformations)?
Some extra information:
- The table has 10 million rows and a little over 200 columns
- The datatypes in the Oracle database are varchar, number and date
- I tried to tune the buffer size in the data flow and found that I could fit about 1900 rows in a DefaultBuffersize of 100 MB
- I use the "Native OLE DBMicrosoft OLE OB Provider for Oracle" (Provider=MSDAORA.1)
Can I do anything to get a better performance or is 1 hour for a table like this the best performance we can get?
(Changing the Oracle database is unfortunately not an option...)
Thanks and regards,
Ellen
Hi,
I want to pull sample records lets say 1000 rows only from oracle database to sql server. Is there any option in ssis to limit the number of rows?
Maybe because I have worked mainly with VB as a front end to SQL Server so I am biased, but I now need definite reasons (I am on a committee for potential future directions) for using VB as opposed to Access for front ending SQL/Oracle, etc. I would also like to use ADO as oppose to DAO. Right now we are using Access with DAO.
Any ideas greatly appreciated.
I'm attempting to move data from an Oracle table to an Access table using an Oracle stored procedure in DTS. The problem is that you can't pass parameters to an Oracle stored proc when its called in a data pump task. Is there a way to pass global variables into an Oracle stored procedure which retrieves data and moves it to an Access database? Maybe in an Active X task? We are required to use an Oracle stored procedure by our DBA's or else I'd just pass the variables into a SQL string and use it in the data pump task.
View 1 Replies View Relatedhello
we suppose to link the form in MS Access with Oracle
can anyone tell me how to write the code for these buttons
i tried to write as I learned in VB.NET,
But it seems doesn't work :(
http://www3.speedyshare.com/data/191404757/10803567/78224332/db2.jpg
How can I access Oracle stored procedure from MS SQL Server?
View 1 Replies View RelatedWhen I try to create a model in Report Builder based on a connection to Oracle 10g database I get the following error.
ORA-02179: valid options: ISOLATION LEVEL { SERIALIZABLE | READ COMMITTED }
Is this a bug in the CTP version or am I missing something?
Hi All
My manager told me to link SQL Server database tables to access so that he can access the tables in MSAccess to do his SQL queries.
I am thinking of linking server but I am not sure about that.
Is someone can tell me what to do and explain me how.
Thanks in advance
Sincerely.
David
I am unable to acces Oracle from legacy DTS designer, here is what I have done,
1. I have kept my old DTS packages in SQL2K5 legacy DTS container
2. Now I am unable to access oracle; it gives provider error
3. I am able to connect oracle from SQLPLUS
How can I troubleshoot this problem?
------------------------
I think, therefore I am - Rene Descartes
Hi,I currently have a ms access update query that runsperfectly well and quicly in access however I now need to add this queryto convert this qeryu to oracles equivelant sql syntax and add it to the endof an oracle sql script.Unfortunately Im not having much success although i seem to be able toconvert it to a working oracle sql. it takes hours to run the statement inoracle where as in access it runs in secondsany help is appreciated.Ms Access sql :UPDATE (PRO_STY_TPRICES INNER JOIN PRO_STYLE_COLOURS ON PRO_STY_TPRICES.STY_ID = PRO_STYLE_COLOURS.STY_ID) INNER JOIN PRO_TST_RV3X_RPT_WRK ON(PRO_STYLE_COLOURS.SEASON = PRO_TST_RV3X_RPT_WRK.SEASON) AND(PRO_STYLE_COLOURS.STY_NUM = PRO_TST_RV3X_RPT_WRK.STY_NUM) AND(PRO_STYLE_COLOURS.STY_QUAL = PRO_TST_RV3X_RPT_WRK.STY_QUAL) AND(PRO_STYLE_COLOURS.BF_MAT_CHAR_VAL = PRO_TST_RV3X_RPT_WRK.BF_MAT_CHAR_VAL)SET PRO_TST_RV3X_RPT_WRK.MKD_DATE = pro_sty_tprices.new_active_date,PRO_TST_RV3X_RPT_WRK.MKD_PRICE = pro_sty_tprices.new_tpriceWHERE (((PRO_STY_TPRICES.NEW_ACTIVE_DATE) Is Not Null));Oracle SQL :update pro.tst_rv3x_rpt_wrk xset(x.mkd_date, x.mkd_price) =(Select a.new_active_date, a.new_tpricefrom pro.sty_tprices a, pro.style_colours bwhere a.sty_id=b.sty_idand b.bf_mat_char_val = x.bf_mat_char_valand b.season = x.seasonand b.sty_num = x.sty_numand b.sty_qual = x.sty_qualand a.new_active_date is not null)
View 1 Replies View RelatedWe're having issues with Microsoft's 64 bit Oracle OLE-DB driver... when we escalated to Microsoft PSS they recommended that we go with Oracle's OLE-DB driver since Microsoft's hasn't been modified in a few years.
I've seen a lot of differing opinions on this topic (almost everyone says do not use Oracle's driver) and am wondering if there's a definitive answer here.
Larry
How to access the XML, CLOB and BLOB Oracle data through linked server from SQL Server 2012?
I want to retrieve XML, CLOB and BLOB data from SQL Server 2012 through Oracle Linked server .
I have a requirement to set up an Oracle linked server, Ive never done this before and in fact never touched Oracle so I dont really know what I am doing.
View 4 Replies View Related
Can I create ODP.NET connection in my SSIS connection manager. I had downloaded and installed ODP.NET on my server provided by oracle. The idea is I need to test this provider and see what is the difference connecting oracle database and the data load speed.
thank you
I am trying to execute oracle procedure (anonymous block) with input and output parameters from ms sql code and return 2 values back:a number and a string.I am using **EXEC() AT** to execute oracle code and return a string back to ms sql. It works fine when returning numbers, but if I add a string output parameter, I am receiving an error:Msg 0, Level 11, State 0, Line 0...A severe error occurred on the current command. The results, if any, should be discarded.
The server log has the following entry in exception.txt:
Exception 0xc0000005 EXCEPTION_ACCESS_VIOLATION reading address 00000005031C07E0 at 0x0000000070F9C183
There is also a SQLDump file generated:
* BEGIN STACK DUMP:
* 10/28/15 12:45:38 spid 63
* Exception Address = 000000005040C183 Module(MSVCR100+000000000003C183)
[code]....
It looks like the problem is in passing varchar2 from oracle into ms sql. I had logging code in oracle block, and it works fine. I have found a few examples of using **exec() at** but there is always only integer output passed back.
Hello,
I am doing a SSIS package to transfer rows from access db to sql server using foreach file. Before loading the data, I want to count the number of rows in a table of the access db. How do I do that?
thank you in advance
Hi there,
I'm currently grouping data on some criteria, the way the data works basically means that there are between 2-3 groups guaranteed (no more). In the Group Header I have CountRows(table1_group) thus giving me the total number of rows in each group at the top of each grouping. However, I need to do a calculation in a textbox above the table using these row counts. The method of grouping is not too difficult when using the VB syntax in the grouping expression but more difficult to get the same effect from the SQL side and hence I don't want to have separate datasets calling different queries to get the information that way. Is there anyway to get access to these row counts on the groups? Reporting Services can't know how many groups there will be before processing so I'm not sure that this is possible? Ideally I suppose if there was a Group CountRows collection of some kind that could be accessed in an expression in the textbox or custom code then this might be possible. I could also add an invisible column and set the values to something specific depending on the group if there was a way to count the number of values in the table (unique values repeated in columns in a group, but unique to that group).
Any help is much appreciated,
Thanks.
I have a table data as shown below.
IDFNLN
1x
1y
2a
2b
3g
4t
I want output as shown below.
IDFNLN
1xy
2ab
3g
4t
I want the two duplicate rows to be merged into one. How to achieve it.
I'm got a "folder" structure application which we'll be using as an in-house directory viewer. (In case you're wondering, it doesn't relate to any "real" folders, so using xp_cmdshell is out! )
Each folder and file record can have its own permissions, however these are assumed to inherit from the parent folder if no specific access rules have been set, basically in the same way file systems work. Each file record can only have one parent, and a folder can either have a parent or be at the root level.
Right now I'm having an issue with the inheritance of permissions. Say if I want to grant access to "Folder 1" to "Group A", then "Group B" shouldn't be able to see it. However, if I grant access to "File 1" in "Folder 1" to "Group B", then "Group B" should be able to see "Folder 1", but only see "File 1" and not the rest of the contents.
I thought I could do this with a CTE, but I'm having a bit of difficulty..
Here's the code:
CREATE TABLE #FileSystem (
FSIDINTEGER NOT NULL IDENTITY(1,1) PRIMARY KEY
,ParentFSIDINTEGER NULL
,NameVARCHAR(100)
,RecordTypeVARCHAR(1)-- (F)older, or Fi(L)e
[Code] ....
I have a ssis package which identifies duplicate records in access database. I have staged access database into sql sever and created ssis package. Now, I have final list of records which needs to be delete from access database and new records which are to be inserted into access database.
What do I need to do if I want to delete those duplicate records directly from access database using SSIS. I cannot truncate whole access database and reload. I just have to delete duplicate rows from access db and add new records.
I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query?
Thanks.
Hi!
I'm loading from Oracle using the OraOLEDB.Oracle.1 provider since I need unicode support and I get the following error:
TITLE: Microsoft Visual Studio
------------------------------
Error at myTask [DTS.Pipeline]: The "output column "myColumn" (9134)" has a precision that is not valid. The precision must be between 1 and 38.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0204018 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
For most of my queries to Oracle I can cast the columns to get rid of the error (CAST x AS DECIMAL(10) etc), but this does not work for:
1) Union
I have a select like "SELECT NVL(myColumn, 0) .... FROM myTable UNION SELECT 0 AS myColumn, .... FROM DUAL"
Even if I cast the columns in both selects (SELECT CAST(NVL(myColumn, 0) AS DECIMAL(10, 0) .... UNION SELECT CAST(0 AS DECIMAL(10, 0)) AS myColumn, .... FROM DUAL) I still get the error above.
2) SQL command from variable
The select basically looks like this:
"SELECT Column1, Column2, ... FROM myTable WHERE Updated BETWEEN User::LastLoad AND User::CurrentLoad"
Again, even if I cast all columns (like in the union), I still get the same error.
Any help would be greatly appreciated. Thanks!
Is there any step by step help sites for setting up SQL 2005 linked (oracle 10) server?
I find MSDN articles but they referance winNT and 2000, I'm not getting very far and I'm not a DBA but need to get this working asap.
Hello,
On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.
I use one or the other according to my needs.
In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.
Almost everything works except Microsoft OLEDB provider for Oracle.
ssis packages on the test machine will return an error
Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.
Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.
Does anyone could point me to the right direction to solve this issue?
Thanks,
Philippe
Hi,
I am trying to make an oracle publiching from sql server 2005 enterprise final release, i installed the oracle client 10.2 (10g) on the same server where sql server already installed, i made different connection to oracle database instance and it was ok.
from sql server : right click on publication -New oracle publication-Next-Add Oracle Publisher-Add button-Add Oracle Publisher-i entered server insttance test1 and their users and passwords--connect --->
the oracle publisher is displayed in the list of publisher but when press ok i got the following error :
TITLE: Distributor Properties
------------------------------
An error occurred applying the changes to the Distributor.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server could not enable 'test1' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The permissions associated with the administrator login for Oracle publisher 'test1' are not sufficient.
Changed database context to 'master'. (Microsoft SQL Server, Error: 21684)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21684&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Any idea about this error ?
Thanks
Tarek Ghazali
SQL Server MVP.