hi i am using windows mobile application5.0 .i am new to this .while debugging it is showing error active sync not installed.what is this active sync,how to install it,how to use it .can you hlep me
thanks
Hi there,
Is it possible to, somehow, get a specific users password from active directory? The reason I ask is that I am writing a new system and really don't want the users having to remember yet another password, but rather be able to use there network password? I would like to write the logon section myself and not use any built in functions that anything may have.
Please can someone advise. I don't think it is possible but have been asked to persue the issue.
Thanks
Hello,I need a permanent synchronization between the "Active Directory" and the UserTable in my WebApp.I think a good solution for my interface can I realize with the "Stored Procedures" in SQL Server 2005. Is this the right way?I can create a Stored Procedure and a AD-Reader separately, that's no problem. But how I can import the "System.DirectoryServices"-Assembly in my Stored Procedure?Or is there an other solution?Thanks a lot!NussyStar*
View 2 Replies View RelatedIs there anyway to disable this functionality?
View 7 Replies View RelatedHI ,
I Created one database named login.sdf in sql Ce ,i created one table login having two fields (username and password).it is working well.I trying to synchronise these with SQL2000 using Active sync.it is not working ..And one more things ,i tried to connect the default pocket PC 2002 emulator with Active sync.it is also not working.can anybody give some solution for these problem
Thanks in Advance
Regards
Ihsan
I have a table with the following columns employeeSessionID, OpDate, OpHour, sessionStartTime, sessionCloseTime. I need to see how many users remain active per hour. I can calculate how many logged in per hour, but I am stumped on how to count how many are active per hour. I have a single table that stores login data. I have created a query that pulls out the only the data needed from the table into a temp table using this query. Also note it is possible that the sessionCloseTime is null if the device has not been logged out this would need to be counted a active.
TABLE NAME #empSessionLog Contains the time stamp data OpDate, sessionStartTime and sessionCloseTime.
OpDatesessionStartTimesessionCloseTime
2015-01-202015-01-20 14:32:59.1302015-01-20 14:33:14.6299166
2015-01-202015-01-20 06:58:33.7302015-01-20 15:27:16.9133442
2015-01-202015-01-20 09:56:22.8402015-01-20 17:56:29.7555853
2015-01-202015-01-20 05:59:18.6132015-01-20 14:05:19.0426707
[code]....
can see how many sessions logged in per hour with the following statement:
SELECT
opDate,
FORMAT(DATEPART(HOUR, sessionStartTime), '00') AS opHour,
Count(*) AS Total
FROM #empSessionLog
Group BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00')
Order BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00') ASCResults:
opDateopHourTotal
2015-01-20041
[code]....
Where I am stuck is how do I count the sessions that remain active per hour until the session is closed with the sessionCloseTime.
Hi
I am having some teething problems while installing SQL on a 3 node cluster. Within the Cluster configuration I have 3 Cluster Groups with each of them having their associated disk resources. All these disk resources physically exist on a SAN.
The actual cluster is running absolutely fine and I can access all the disks from their respective owner node. The problem only starts when I start installing SQL Server 2005 on this cluster. I specify the Cluster group from the Cluster Group Selection and choose the desired partition and then the error message pops up
"There is not enough diskspace on the destination disk for the current SQL Server data files. To proceed, free up disk space to make room for data files, or install the data files to a different drive"
But the disk I am trying to install it on is 264Gb and none of it is used. I have also tried to change it to a different disk within the same Cluster group but to no avail. I have even tried to install it in a different cluster group all together but I get the same error message.
I have googled around havent found anything so far. The disks have got full permissions for the account I am installing SQL with.
Any help will be much appreciated.
Regards
Adnan
Hi
I am newbie in SQL Clustering. I have set up a Windows Server Cluster with 2 nodes and am having the following problem with Physical Disk resource for cluster groups:
My Default Cluster Group (named Cluster Group) has IP Address, Network Name, Physical Disk and MSDTC resources. In addition to that my Default SQL Server instance resources are also in this group. I had this initial set up for Active/Passive mode.
Now I am trying to set up a SQL Cluster in Active/Active mode. For this I have to install another instance of SQL Server in the existing cluster and make a separate cluster group for its resources. I made a new cluster group (SQL Instance Group) with an IP Address and a Network Name resource for this new instance but I dont have any Physical Disk resource to allocate to it. As such while installing the SQL Server Instance I get stuck when I'm asked to select the quorum disk to be used.
Is it possible to configure two quorum disks, one for each group?
What's the concept of dedicated disks resource for each sql instance in a group? Is this same as the quorum disk? If this is not a shared disk how do I configure a dedicated disk resource for my second cluster group (SQL Instance Group)?
Anyone could please help me out with this?
Hi folks,
We are going thru the process of scoping an active/active cluster at one site.
I was wondering whether there will be any issues with mirroring (DB by DB) off the cluster into non clustered server at an alternate DRP site.
Regards, Brian
Sutherland
Hi all, My aim to install active/active 2 node SQL 2005 cluster. I have installed sql cluster on one mode, which automatically installed on node 2.
it works great. However When i tried to install second virtual server, it is not allowing me to install.
it says already install, can anyone tell me how to install active active cluster
Hi,
We are trying to set up an active/active configuration of a SQL Server
cluster, and we had a few questions.
Initially, we want to have 2 Database Servers that would share the same
Database (both reading/writing to the same tables).
However, from reading the MS docs, we find out that we can have what
they call an "active/active" configuration using a Cluster but they
need to have 2 different disk sets, i.e. having 2 separate databases.
If this assumption is correct, how does the data get synchronised
between the 2 databases (that are on the 2 different disks sets)?
Can anyone help? thanks
Axel
ACTIVE/ACTIVE SQL Server 2000 Cluster
This was my plan.
Physical box - box1,box2
virtual box - virtual1
i have a active/passive cluster virtual1 (primary node box1, secondary box2)
I am creating another virtual box on box2 as primary node by name virtual2)
whenever my installation setup runs my default server name is greyed out. it always requires a instance name.
Is that the way it should work?
i can only use instance for active/active failover?
please advice
How do I install MSDTC in an active/active MSCS cluster environment?
If I run comclust.exe, I can only activate MSDTC on one of the nodes at a time.
I need DTC on both nodes.
(Opsys is W2K with SQL 2000)
//Mange :)
Hello folks,
have you ever heard of an Active/Active SQL Sever 2000 Cluster deployed in a pure OLTP environment?
Some 8 years ago I have learned about a bespoke solution for the SAP ERP system (not the BW!) with DB2 Parallel Server for a huge German company. Then again, I would expect that Oracle RAC might fit into an OLTP environment, although I never heard about a real world implementation.
All this led me to believe clustering is good for failover purposes, and for decision support services, not quite for OLTP applications.
So if you see a point in Active/Active Clustering and OLTP please come forward and explain.
Cheers,
Johann
P.S: For those of you who want to know: Consultants from www.hiltes.com want us to deploy an Active/Active Cluster for their Fashion 3000 Net stock software.
We run several SQL 2000 SP4 instances on IA64 active/active cluster. The OS we run with is Windows Server 2003 SP1. We have different network cards : 2 network cards teamed for production purposes in domain X and 1 network card dedicated for problem solving in domain Y.
First we configured the cluster with only the 2 teamed network cards for production purposes in domain X. Later we introduced the second network card for problem solving in domain Y.
Everything looks fine. The (virtual) SQL instance listens on two different IP adresses on TCP port 1034. If we try to make connection via isql, EM or Query analyzer than we can directly contact the SQL instance from a workstation/server within domain X but this doesn't work form a workstation/server within domain Y. However if we use the specific TCP port in the connection in domain Y the connection is setup. We wish however not to use explicit TCP ports in setting up connections.
Has anyone experienced the same problem before or has anyone an idea how to solve the problem?
I have a 2005 active/active cluster and want to apply SQL server 2005 SP2 to both node.
I know that for active/passive , the sp can simple be installed on the active node(instance) and everything will be replicated to the other node.
bear in mind what I have SSIS and SSAS and SSRS running on the active/active cluster.
what is the rigth method for applying the SP to activeactive cluster?
Thanks
Hi
While configuring an active / active cluster, do I need to run the SQL setup on both nodes?
The SQL2K setup installs binaries on localdisks of both nodes - hence the question.
thanks
Liju
I have setup an active/active clustering environment for SQL Server, however it is 2 seperate virtual servers. How can I set them up to exist as one virtual server containing both active installations? Can this be done? I have two compaq 8500 w/8 processors each. I need to be able to cluster these configurations to take advantage of all 16 processors in one virtual SQL Server. Can it be done?
If you can answer these questions, you will have my undying gratitude.
Thanks in advance.
Hi
I am running some tests on SQL7 in an active/active cluster and have a couple of queries
1. When I create an ODBC DSN, why is the "Use the Failover SQL Server if the primary SQL Server" checkbox disabled
2. To test, I was running SQL queries from Access over the DSN created. When the Primary Server went down, I had to reconnect to re run the query - Is this normal?
3. Can someone point me to any documentation on the above scenario that would shed some more light?
Thanks
Liju
I currently have a two node HP hardware active/active cluster server. Running windows NT 4.0 Enterprise and dSQL server 6.5 sp 3. I want to upgrade the cluster to SQL 7. I would like to know if anyone ran into any problems or has sucessfully attempted this.
Also I read a few months ago about a gottcha involving NT sp4 and SQL sp5a that would prevent a node from failing over. Has this been corrected and does it affect SQL 7.
thanks
Hi
Is there anyone who knows where I can get some information about
installing an ACTIVE/ACTIVE SQL 2000 Cluster server (MSCS).
I have no problem setting up an active/passive failover cluster.
Where can I get more information? Do I need two instances? Two databases?
What's the difference between active/active and active/passive?
Thanks!
Hello, Can anyone please explain how the failover processes works on a sql server 2000 2 node active/active cluster.
Given the following
You have 2 node active/active cluster NodeA & NodeB
Question
1. How many SQL instances need to be installed on each node?
2. If the answer to question #1 is one instance per node, then
say if NodeA fails NodeB will take over all the resources of NodeA
including the master database, How does that work , how can once instance (in nodeB) handle two master database i.e its own master database and the one taken over from NodeA.
Hi,
I've just setup an 2 node active/active sql cluster (my first). Both servers have exactly the same specification, 16GB of RAM each and SAN attached. My question is, how do I configure the min and max memory for each sql instance. I've read some where that I need to follow the 20-40-40 rule as, 20% for the OS, 40% for the active sql instance on the node and the other 40% is for the other sql instance if it fails over. Are there any other gotcha that I need to be aware of? Can someone share some light with me in regards to this? Thanks
Ken
We have an active/active node setup with SQL 2005. Does anyone have any samples of VBS I could use to see what node is actually taking requests at a certain time? What I want to determine is what the actual active node is.
Thanks.
I want to host 2 seperate SQL databases and wanted to know if it would be possible to run this in an active active cluster config which each database running on a different server.
The clustering would be there in the event of failure of one of the servers but for normal operation the two sql instances would be completely seperate.
Is this configuration possible and would this give the best performance and resiliance from a 2 server setup.
What do you think?
Help, I have an active/active cluster with SQL2k5 Ent with SP2 installed on node1 that is currently running live apps, I need to add the 2nd node to have fail over functionality but if I use the Change Install from Add or Remove Programs on the primary node to add the 2nd node I get the following error.
"The File 'c:....SqlRun_SQL.ms' is not a valid installation package for the product Microsoft SQL Server 2005(SQL2K5VVS01). Try to find the installation package 'SqlRun_SQL.msi' in a folder from which you can install Microsoft SQL Server 2005(SQL2K5VVS01).
No I assume this is because node 1 has had service pack two applied. Does anyone have instructions how I can add node two without having to completely uninstall Node 1, as the doc€™s with SQL2005 SP2 say it can not be removed, a complete uninstall of 2005 must be done???
Hi,
I can't seen to find any info on the exact version of OS and SQL one needs to run active / active cluster.
I want to run 2 window server 2003 box with SQL 2005 in an active / active mode. What version of windows 2003 and SQL2005 would I need?
Thanks
Frank
Hi
I have an active/active cluster and the second node failed and could not start all the instances are intact on the first node. Now we have built the second node and joined to the cluster group as well.
I am sure we dont need a install as all the instances are there so anyone know where I need to join the SQL cluster to talk to both the nodes
Thanks in advance
Anup
Anyone know of any differences in an active/active cluster and an active/passive cluster that would cause an application to work on an active/passive environment but not an active/active environment?
View 8 Replies View RelatedHi all,
1. is it possible to have both sql server 2000- and 2005 on a 3 node active/active/active cluster
2. if not is is possible to have sql server on an active/active/active cluster
regards,
joey
I invoke xp_cmdshell proc from inside a stored procedure on a 2-node active/passive SQL 2005 SP2 Standard cluster. Depending on which server the xp_cmdshell gets executed on I need to pass different arguments in the shell command. I thought I could use host_name() function to get the runtime process server, however, I am finding that it's not behaving correctly. In one example I know my active node is server2, but the host_name() function is returning server1. The only thing that I could possible explain this is that the MSDTC cluster group is not always on the same active node as the SQL server group and in the case I am talking about the cluster groups are in this mode (differnet nodes). Does the xp_cmdshell get executed by the SQL active node or the MDTC active node? And what is the best way to find out which server is going to run my xp_cmdshell?
Thanks.
Edit:
Perhaps another by product of this is that if I run select host_name() from the Studio Management query window i get different results depending on which server I am running the Studio Management on. On server1 I get server1 and on server 2 I get server 2, all the while server2 is the active node. I need a different function that will always let me determine the correct server that'll be running the xp_cmdshell...
Edit 2: I guess I could determine the running host inside the command shell itself, but I am curious to see if i can do it (cleaner) from SQL.
We have (had) an active/active cluster. 2 physical machines,
each running their own instance, clustered together. Node1/Ins1 and Node2/Ins2.
Node2 failed and Ins2 failed over to Node1 as it should. Node2 required that we
rebuild the server (rebuild = reinstall O/S). Now we need to get Node2 back
into the cluster and get Ins2 failed back over to Node2.
Does anyone know, for certain, the correct steps to accomplish this? Obviously,
we could backup everything and completely destroy Ins2 and recreate it on Node2
then rejoin the cluster. But I'm looking for something less destructive.
Is it possible to reinstall SQL, then rejoin the cluster, and then fail Node2
over? Or will there be registry conflictions?
Any help would be appreciated. Also, if you have any links to some official
documentation, that would be great too.
Thanks
I am new to clustering and I did found lot of information on internet using google. Only Q I have is, do I have to do Clustering at Windows 2000 (OS level) before I can do it at SQL Server 2000 level.
Thanx