I am working with an active x script task and I keep getting this error.
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x01DF3DD4.
I have tried to delete all but the first couple of lines but I keep getting this error. Does anyone have any ideas on how I can fix this. This code worked fine in SQL Server 2000.
I am having some teething problems while installing SQL on a 3 node cluster. Within the Cluster configuration I have 3 Cluster Groups with each of them having their associated disk resources. All these disk resources physically exist on a SAN.
The actual cluster is running absolutely fine and I can access all the disks from their respective owner node. The problem only starts when I start installing SQL Server 2005 on this cluster. I specify the Cluster group from the Cluster Group Selection and choose the desired partition and then the error message pops up
"There is not enough diskspace on the destination disk for the current SQL Server data files. To proceed, free up disk space to make room for data files, or install the data files to a different drive"
But the disk I am trying to install it on is 264Gb and none of it is used. I have also tried to change it to a different disk within the same Cluster group but to no avail. I have even tried to install it in a different cluster group all together but I get the same error message.
I have googled around havent found anything so far. The disks have got full permissions for the account I am installing SQL with.
Can anyone tell if a COMMIT can be given inside a Active script task in a DTS package? This task performs a transfers a few thousand records from Oracle to SQL row-by-row and I want to commit after each row is processed and not at the completion of the full task. Is this possible.
Can I still use my existing Active-X script which is created in SQL 2000 DTS package in the "Acitve-X Script Task" of SSIS? Any difference I should aware?
How do I call the global variable as I did before?
In a SQL Server 6.5 database a task appears in the Running Tasks tab as Active. I have tried to Stop it for 2 hours but it will not disappear. When I run dbcc opentran against the database it says there are no Active open transactions. I also can't see anything in Current Acitivity.
The task is a scheduled task that runs daily and it has run OK both before and after this Active task
Recently I migrated one dts package from sql server 2000 to sql server 2005. I chnaged the connection string as well. when i run it in BIDS, I don't get any error. But when I execute it in SSMS (under Integration service) I am getting one error. It is showing :-
Error : The task "Active X Scriopt Task undefined " cannot run in this edition of Integration services. It requires higher level edition.
Task Active X Script Task undefined failed.
What does it mean? How to solve it? I am using SQL server standard edision.
I have a table with the following columns employeeSessionID, OpDate, OpHour, sessionStartTime, sessionCloseTime. I need to see how many users remain active per hour. I can calculate how many logged in per hour, but I am stumped on how to count how many are active per hour. I have a single table that stores login data. I have created a query that pulls out the only the data needed from the table into a temp table using this query. Also note it is possible that the sessionCloseTime is null if the device has not been logged out this would need to be counted a active.
TABLE NAME #empSessionLog Contains the time stamp data OpDate, sessionStartTime and sessionCloseTime. OpDatesessionStartTimesessionCloseTime 2015-01-202015-01-20 14:32:59.1302015-01-20 14:33:14.6299166 2015-01-202015-01-20 06:58:33.7302015-01-20 15:27:16.9133442 2015-01-202015-01-20 09:56:22.8402015-01-20 17:56:29.7555853 2015-01-202015-01-20 05:59:18.6132015-01-20 14:05:19.0426707
[code]....
can see how many sessions logged in per hour with the following statement:
SELECT opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00') AS opHour, Count(*) AS Total FROM #empSessionLog Group BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00') Order BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00') ASCResults: opDateopHourTotal 2015-01-20041
[code]....
Where I am stuck is how do I count the sessions that remain active per hour until the session is closed with the sessionCloseTime.
I receive the following error message when I try to use the Bulk Insert Task to load BCP data into a table:
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 4. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (overflow) for row 1, column 1 (rowno).".
Task failed: Bulk Insert Task
In SSMS I am able to issue the following command and the data loads into a TableName table with no error messages: BULK INSERT TableName FROM 'C:DataDbTableName.bcp' WITH (DATAFILETYPE='widenative');
What configuration is required for the Bulk Insert Task in SSIS to make the data load? BTW - the TableName.bcp file is bulk copy file as bcp widenative data type. The properties of the Bulk Insert Task are the following: DataFileType: DTSBulkInsert_DataFileType_WideNative RowTerminator: {CR}{LF}
Any help getting the bcp file to load would be appreciated. Let me know if you require any other information, thanks for all your help. Paul
We are converted our DTS 2000 packages to Sql Server 2005 SSIS. I am getting following error on my ActiveX script that got converted. I am new to SSIS and DTS. Never ever worked with ActiveX also. So any help would be appreciated. Following is the script followed by error I get:
Function Main() DTSGlobalVariables.Parent.Steps("Record Stats").DisableStep = False 'Record Stats
if (DTSGlobalVariables("FILE_EXISTS").Value > 0) then 'right click on task, go to workflow, options to see task name DTSGlobalVariables.Parent.Steps("SET VALID FILENAMES").ExecutionStatus = DTSStepExecStat_Waiting ''call SET_VALID_FILENAMES DTSGlobalVariables.Parent.Steps("Record Stats").DisableStep = True 'do not run l end if
Main = DTSTaskExecResult_Success End Function
Error I get Is:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x000A39BC.
I have the following code in an ActiveX Script task for SSIS 2005 package... This worked about a year ago when it was first developed. I am coming in to try to update some things and i am running into this problem
Function Main()
Dim crDocument
Dim crApp
Dim sCRConnectionString
Dim crTable
strServer = DTSGlobalVariables("DBServer")
strDatabase = DTSGlobalVariables("DBName")
strCR = DTSGlobalVariables("CrystalReportPath")
strOutput = DTSGlobalVariables("OutputPath")
sFileOutputPDF = strOutput & "EventLogReport.pdf"
strReportLocation = strCR & "LoggedEvents.rpt"
Set crApp = CreateObject("CrystalRuntime.Application")
Set crDocument = crApp.OpenReport(strReportLocation )
It makes it to the "Exporting.." msg box and then i get the following error
Error: 0xC0048006 at ActiveX Script Task, ActiveX Script Task: Retrieving the file name for a component failed with error code 0x0173DA5C.
At first I thought it may have been an issue with the crystal report having a popup or something come up while this was executing.. but I was able to open the crystal and export the data to a pdf no problem... Any suggestions????
I am newbie in SQL Clustering. I have set up a Windows Server Cluster with 2 nodes and am having the following problem with Physical Disk resource for cluster groups:
My Default Cluster Group (named Cluster Group) has IP Address, Network Name, Physical Disk and MSDTC resources. In addition to that my Default SQL Server instance resources are also in this group. I had this initial set up for Active/Passive mode.
Now I am trying to set up a SQL Cluster in Active/Active mode. For this I have to install another instance of SQL Server in the existing cluster and make a separate cluster group for its resources. I made a new cluster group (SQL Instance Group) with an IP Address and a Network Name resource for this new instance but I dont have any Physical Disk resource to allocate to it. As such while installing the SQL Server Instance I get stuck when I'm asked to select the quorum disk to be used.
Is it possible to configure two quorum disks, one for each group? What's the concept of dedicated disks resource for each sql instance in a group? Is this same as the quorum disk? If this is not a shared disk how do I configure a dedicated disk resource for my second cluster group (SQL Instance Group)?
We are going thru the process of scoping an active/active cluster at one site. I was wondering whether there will be any issues with mirroring (DB by DB) off the cluster into non clustered server at an alternate DRP site.
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
I can't for the life of me figure out why I am getting an error with this simple script. The error I get is "expected end" on line "22" which is the first "elseif" in the nested if statement. This makes no sense as obviously I don't want an end if statement there. Any ideas where my syntax is wrong would be greatly appreciated.
if txncode = "" or IsNull(txncode) then Main = DTSTransformStat_SkipRow exit Function end if
select case txncode case "210" if (Cashin > "0" and Cashin < "1000") then txncode = "210-1000" 'msgbox txncode elseif ("1000" < Cashin and Cashin < "5000") then txncode = "210-1000-5000" elseif (Cashin > "5000") then txncode = "210-5000" else txncode = "210" end if msgbox txncode Main = DTSTransformStat_OK exit function
case else Main = DTSTransformStat_OK exit function
end select
DTSDestination("TransactionCode") = txncode Main = DTSTransformStat_OK End Function
has anyone encountered the "microsoft visual studio cannot shut down because a modal dialog is active. close the active dialog and try again." error when shutting down.
i have been getting that every once and awhile, and do not see any open dialog windows that need to be closed, and i end up having to end-task on my visual studio session.
does anyone know what is causing this error and how to avoid it?
We are trying to set up an active/active configuration of a SQL Server cluster, and we had a few questions.
Initially, we want to have 2 Database Servers that would share the same Database (both reading/writing to the same tables). However, from reading the MS docs, we find out that we can have what they call an "active/active" configuration using a Cluster but they need to have 2 different disk sets, i.e. having 2 separate databases. If this assumption is correct, how does the data get synchronised between the 2 databases (that are on the 2 different disks sets)?
have you ever heard of an Active/Active SQL Sever 2000 Cluster deployed in a pure OLTP environment?
Some 8 years ago I have learned about a bespoke solution for the SAP ERP system (not the BW!) with DB2 Parallel Server for a huge German company. Then again, I would expect that Oracle RAC might fit into an OLTP environment, although I never heard about a real world implementation.
All this led me to believe clustering is good for failover purposes, and for decision support services, not quite for OLTP applications.
So if you see a point in Active/Active Clustering and OLTP please come forward and explain.
Cheers,
Johann
P.S: For those of you who want to know: Consultants from www.hiltes.com want us to deploy an Active/Active Cluster for their Fashion 3000 Net stock software.
We run several SQL 2000 SP4 instances on IA64 active/active cluster. The OS we run with is Windows Server 2003 SP1. We have different network cards : 2 network cards teamed for production purposes in domain X and 1 network card dedicated for problem solving in domain Y. First we configured the cluster with only the 2 teamed network cards for production purposes in domain X. Later we introduced the second network card for problem solving in domain Y. Everything looks fine. The (virtual) SQL instance listens on two different IP adresses on TCP port 1034. If we try to make connection via isql, EM or Query analyzer than we can directly contact the SQL instance from a workstation/server within domain X but this doesn't work form a workstation/server within domain Y. However if we use the specific TCP port in the connection in domain Y the connection is setup. We wish however not to use explicit TCP ports in setting up connections. Has anyone experienced the same problem before or has anyone an idea how to solve the problem?
I have a 2005 active/active cluster and want to apply SQL server 2005 SP2 to both node. I know that for active/passive , the sp can simple be installed on the active node(instance) and everything will be replicated to the other node. bear in mind what I have SSIS and SSAS and SSRS running on the active/active cluster.
what is the rigth method for applying the SP to activeactive cluster?
I'm having trouble running jobs with my active directory (ADS) account. I've setup my SQL services to run under an ADS account, but jobs cannot seem to query ADS for user information. We're running Windows Server 2003 and SQL Server 2005 SP2.
Here is the error message:
==
The job failed. Unable to determine if the owner (ADSme) of job eFASRtest has server access (reason: Could not obtain information about Windows NT group/user 'ADSme', error code 0x5. [SQLSTATE 42000] (Error 15404)).
==
also this message in log:
==
[298] SQLServer Error: 15404, Could not obtain information about Windows NT group/user 'ADSme, error code 0x5. [SQLSTATE 42000] (ConnIsLoginSysAdmin)
==
I have done a *lot* of searching and cannot find the solution. I believe the 0x5 code is access denied.
The same job runs if I change the owner to a SQL login that's not an ADS account.
I'm not certain how to confirm that the SQL Agent account is the account actually querying ADS, also.
I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:
Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?> <ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
Hi While configuring an active / active cluster, do I need to run the SQL setup on both nodes? The SQL2K setup installs binaries on localdisks of both nodes - hence the question.
I have setup an active/active clustering environment for SQL Server, however it is 2 seperate virtual servers. How can I set them up to exist as one virtual server containing both active installations? Can this be done? I have two compaq 8500 w/8 processors each. I need to be able to cluster these configurations to take advantage of all 16 processors in one virtual SQL Server. Can it be done?
If you can answer these questions, you will have my undying gratitude.
Hi I am running some tests on SQL7 in an active/active cluster and have a couple of queries 1. When I create an ODBC DSN, why is the "Use the Failover SQL Server if the primary SQL Server" checkbox disabled 2. To test, I was running SQL queries from Access over the DSN created. When the Primary Server went down, I had to reconnect to re run the query - Is this normal? 3. Can someone point me to any documentation on the above scenario that would shed some more light?
I currently have a two node HP hardware active/active cluster server. Running windows NT 4.0 Enterprise and dSQL server 6.5 sp 3. I want to upgrade the cluster to SQL 7. I would like to know if anyone ran into any problems or has sucessfully attempted this.
Also I read a few months ago about a gottcha involving NT sp4 and SQL sp5a that would prevent a node from failing over. Has this been corrected and does it affect SQL 7.
Is there anyone who knows where I can get some information about installing an ACTIVE/ACTIVE SQL 2000 Cluster server (MSCS). I have no problem setting up an active/passive failover cluster.
Where can I get more information? Do I need two instances? Two databases? What's the difference between active/active and active/passive?
Hello, Can anyone please explain how the failover processes works on a sql server 2000 2 node active/active cluster.
Given the following You have 2 node active/active cluster NodeA & NodeB
Question 1. How many SQL instances need to be installed on each node?
2. If the answer to question #1 is one instance per node, then say if NodeA fails NodeB will take over all the resources of NodeA including the master database, How does that work , how can once instance (in nodeB) handle two master database i.e its own master database and the one taken over from NodeA.
