Actual Date And Time
Dec 13, 2007Hello everyone!
Whenever i insert a new row i would like to have the current date and time in the column DATE. How is that possible?
Thanks a lot and greetings from Vienna
Landau
Hello everyone!
Whenever i insert a new row i would like to have the current date and time in the column DATE. How is that possible?
Thanks a lot and greetings from Vienna
Landau
The dB dates are store in db as 20140303 when I bring this to my application to pick a date, the apps shows the date as 20140303 how can I change this to show in the format 03/03/2014 in my application?
View 3 Replies View Relatedhow can I get the execution time in millisecond of an MDX query in SSAS?For sql we can get it by:
Code:
set statistics time on
--query----
set statistics time off.But I am not getting anything for MDX.
Having a SQL Server 2012 Enterprise (x64) on a Windows 2012 R2. We need to know, a reliable way, the number of processor sql server is using at a give time. We already know how many total processor are available to sql by getting info from sys.dm_os_sys_info.
For instance, a server has 40 processors, we want to know how many of those are being used at a given time. Since the load on the server may not be that high, we would like to know how many processors we can eliminate and the load will still be unaffected.
After watching the server performance for a while, we are predicting we may only need 16. But we would like to get some statistics before we reduce it to this number.
Hi,
I have built a Sales Forecast model to predict the sales
value.
Along with making historic predictions for previous time
periods I also want to retrieve the actual sales values for those periods.
How can I achieve this in a time series model?
I also would like to know how do mining models store the data.
Do they store the data in the same table/view format
as their respecive data source view or in the Model Content format.
I have two queries yielding the same result that I wanted to compare for performance. I did enter both queries in one Mangement Studio query window and execute them as one batch with the actual query plan included.Query 1 took 8.2 seconds to complete and the query plan said that the cost was 21% of the batchQuery 2 took 2.3 seconds to complete and the query plan said that the cost was 79% of the batch.The queries were run on my local development machine. I was the only user. No other programs were running at the time of this test. The results are repeatable.I understand that the query with the lowest cost is not necessarily the fastest query. On the other hand, the difference is quite big. The query that has approx. 80% of the cost takes 20% of the time and the other way around. I have two questions:
Is such a discrepancy normal?Can conclusions be drawn from the cost distribution? For instance, does the query that takes 8.2 seconds but only costs 21% scale better?
I want to calculate the sum of actual sales until a date and forecast sales after a date.I am not sure what the best approach to this problem is, but I have tried my best with the following approach. Any better ways to solve this (using DAX).
I have created a parameter table that offers the last date of each month as possible choices to the user. I have tried to create a measure that sums actual sales up until this date.
SalesQuantityActual:=IF(HASONEVALUE(parLastActualMonth[Date]);CALCULATE(factSalesActual[Quantity];factSalesActual[Date]<=VALUES(parLastActualMonth[Date]));BLANK())
Unfortunately the measure above does not work.
In addition to the parameter table, I also have a normal date table.
I am working with a SQL Server database that was set up to store the year, month, and day in separate columns, rather than use a single column for the date. I plan to change this so that we store dates and times using the datetime data type. Until then, for now, I need to write transact-SQL select statements to concatenate the year, month and day to create a date that can be displayed in the results window in the format yyyy/mm/dd.
I can't seem to find any built-in function in SQL Server that will let me do this. Of course, using Excel or Access, I can use the DATE() function to reconstruct the date into yyyy/mm/dd. Is there a way to reconstruct the date into yyyy/mm/dd in SQL Server?
I have a view in SQLServer 2005. It took 30 sec. to finish. Then I deleted 4500 records from one table that is used in view. It took 90 sec. to finish now. I did a comparison on Actual Execution Plan between before I deleted data and after I deleted data, they are almost same, only different is Actual Number Rows become less after deleted data. So, I wonder why data become less but time become more. When I look closely on the Actual Execution Plan, the ridiculous thing is, there are only Estimated Operation Cost on each step, no Actual Operation Cost. I guess there are something wrong with optimizer because reuse same Execution Plan, but how can I tell which step wrong without Actual Operation Cost.
Thanks!
Henry
This is driving me nuts..
I'm trying to extract some data from a table in oracle. The oracle table stores date and time seperately in 2 different columns. I need to merge these two columns and import to sql server database.
I'm struggling with this for a quite a while and I'm not able to get it working.
I tried the oracle query something like this,
SELECT
(TO_CHAR(ASOFDATE,'YYYYMMDD')||' '||TO_CHAR(ASOFTIME,'HH24:MM : SS')||':000') AS ASOFDATE
FROM TBLA
this gives me an output of 20070511 23:06:30:000
the space in MM : SS is intentional here, since without that space it appread as smiley
I'm trying to map this to datetime field in sql server 2005. It keeps failing with this error
The value could not be converted because of a potential loss of data
I'm struck with error for hours now. Any pointers would be helpful.
Thanks
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField
from MyOptions
where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField
from MyTimetable
where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.
I am trying to load previous days data at 3 am via a SSIS job.
The Date variable is initiated as DATEADD("dd",-1, GETDATE()) in the for loop.
Now, as this job runs at 3 am, and I set the variable as GETDATE() - 1, it excluded the data from 12 am to 3 am in the resultset as Date is set as YYYY-MM-DD 03:00:00:000 I need this to be set as YYYY-MM-DD 00:00:00:000
How can i do this?
In SQL Server 2000:
How do I convert a Julian date to a Gregorian date?
How do I convert a Gregorian date to Julian?
Examples please.
Many thanks in advance.
Gary Andrews
I have the following
Column Name : [Converted Date]
Data Type : varchar(50)
When I try and do month around the [Converted Date] I get the following error message
“Msg 241, Level 16, State 1, Line 2
Conversion failed when converting date and/or time from character string.”
My Query is
SELECT
month([Created Date])
FROM [FDMS_PartnerReporting].[Staging].[Salesforce_MarketingReporting]
SELECT * ,[Due]
FROM [Events]
Where Due >= getdate() +90
This returns the error: Conversion failed when converting date and/or time from character string
Why would this be? How to cast or convert this so that it will work?
Hi there.
I'm trying to extract data from my SQL server & everything in the script I've got is working (extracting correct data) except for one field - which is for the most part it's off by +2 days (on a few occasions - I see it off by just +1 day or even +3, but it's usually the +2 days).
I'm told that it's due to the conversion formula - but - since SQL is not my native language, I'm at a bit of a loss.
The DB table has the date field stored as a type: CHAR (as opposed to 'DATE')
Can anyone out there help?
Please advise. Thanks.
Best.
K7
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp 12:00 AM? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp wont appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
Hello,
we need to track date/time of last update for each record in a table.
As we understand it, we can't use field type Timestamp as this type does
not use dates/times.
Is there any SQL function available which we can bind to a column or
do we really have to use triggers?
Greetings from Mannheim, Germany
Ricardo
Hello,
we need to track date/time of last update for each record in a table.
As we understand it, we can't use field type Timestamp as this type does
not use dates/times.
Is there any SQL function available which we can bind to a column or
do we really have to use triggers?
Greetings from Mannheim, Germany
Ricardo
I want to update the time in a datetime field with the current time.
Fields current value is:
2013-11-11 00:00:00.000
I want to insert this into another table and when I do I want to grab the current time and update that field.
field name: picked_dt
Table: oeordlin
or is there a way through sql to update the time when the picked_dt is updated?
Hi
i have the following situation. in my database i have a datetime field (dd/mm/yy hh:mms) and i also have a field timezone.
the timezone field has values in minutes that i should add to my datetime field so i have the actual time.
afterwards i split the datetime into date and time.
the last part i can accomplish (CONVERT (varchar, datetime, 103) as DATEVALUE and CONVERT (varchar, DATETIME, 108) as TIMEVALUE).
could anybody tell me how i can add the timezone value (in minutes) to my datetime value ?
i do all the calculations in my datasource (sql).
Thanks
V.
I want to display only the date part of a date field which contains both date & time information.
For example I have the value '2013-11-14 00:00:00.000' in my result set, and ideally I would like to show only '2013-11-14'.
I have looked up the datepart() command, however I can't work out how to return all parts of the date, rather than just the year, month, or day.
I have passed createdDate from UI to Stored procedure.createdDate field declared with DateTime.it is having value 2014-07-01.I need to fetch records from the database based upon the created field.but Create_TM in database having value Date with timestamp.so how would i change the createdfield in stored procedure.
ALTER PROCEDURE [dbo].[ByDateRange]
@Feed VARCHAR(50),
@CreatedDate DATETIME
select * from Date_table where Create_TM = @CreatedDate
I have a table named "shift" and I need to setup my query to return only data where the field "startime" = today. The problem I am running into is the starttime field it laid out like "2005-12-29 14:00:00" with different time values. I need to ruturn everything that has todays date regardless of the time value. I tried using GetDate() but that is returning data for other days as well or just data before or after the current time. Does anyone have any suggestions? This is driving me crazy! Thanks, Garrett
View 7 Replies View RelatedHello,
We have a bunch of Audit tables that contain almost exact copies of the operations tables. The audit tables also include:
AuditID - the audit action (insert, modify - old, modify - new, deleted)
AuditDate - date and time of action
AuditUser - User who did it...
At the end of the day I need to know for any given record what it looked like at the beginning of the day and what it looks like at the end of the day. There could have been numerous changes to the record throughout the day, those records I am not interested in. Only the first record and the last record of a give day.
I am going to be doing a lot of MIN(AuditDate) and MAX(AuditDATE) and .. WHERE AuditDate BETWEEN '10/1/2007 00:00:00' AND '10/1/2007 11:59:59' ...
Question: Whats better for performance:
1. Separating out the date and time and doing a clusterd index on the date.
2. Keeping date and time in the same column and just use a normal index.
3. Better ideas?
Thanks,
Bradley
Hi,I need a way of changing the following SQL statement so that the dates are without the hh:mm:ss tt:"Select DISTINCT([StartDate]) From [Events]"How can this be done?Thanks,Curt.
View 4 Replies View RelatedI have a table in which a date value is stored as varchar.some of these values are stored ina dd/mm/yyyy format and other values are stored in a yyyy-mm-dd format..Now I wish to retrieve some data by querying between two dates. However I need to convert the varchar date value to datetime in order to do this but since the date value is in two different formats, the following doesn't work.
select date_value
from my_table
where CONVERT(DATETIME, date_value, 103) between @date1 and @date2
How can you convert the date value to datetime when its stored in mutiple formats. I can't change the table itself as I dont have admin privelages.
Hello,
I am using the calender parameter and I need to convert my data date format to the one that matched that is returned on selecting a date from this calender. Can you show me what this format is.
how can I convert my existing date format to this format. The existing date format is 2007-07-26 21:27:13.000
thank you
Kiran
How can I obtain just the time portion from a date/time column?
My data contains "2008-05-19 09:30:00.000"
Actually, all I want/need is the hh:mm part of it.
Thanks,
Walt
SELECT ltrim(str(datepart(yyyy,getdate()))) +'-'+
replicate('0',2-len(ltrim(str(datepart(mm,getdate())))))+ltrim(str (datepart(mm,getdate())))+'-' +replicate('0',2-len(ltrim(str(datepart(dd,getdate())))))
+ltrim(str(datepart(dd,getdate())))
This is how i am getting datepart of datetime.Is there any other way to get the date and also time seperately..
Thanks.
i have a query
select mydate,lastname from users
group by mydate,lastname
now the only thing is mydate is a datetime fields but i want the results to group by just the date for each lastname entered.
How do i do this?
I have a table that's of type date/time (i.e. 01/01/1900 00:00:00).What I want is to do the following:Say you have these records:person | date-time-------+---------------------------jim | 06/02/2004 00:05:52jim | 06/02/2004 05:06:21jim | 06/02/2004 05:46:21jim | 06/15/2004 11:26:21jim | 06/15/2004 11:35:21dave | 06/04/2004 09:35:21dave | 06/04/2004 11:05:21dave | 06/06/2004 10:34:21dave | 06/08/2004 11:37:21I'd like the results to count how many days and returnperson | days-------+-------jim | 2dave | 3How would I do this?--[ Sugapablo ][ http://www.sugapablo.com <--music ][ http://www.sugapablo.net <--personal ][ Join Bytes! <--jabber IM ]
View 1 Replies View RelatedI have an SSIS package that moves data from SQL Server to an legacy Access database. In SQL Server, there is a date/time column that I need to split into a separate date column and time column in the access database. Initially I just created a derrived column for the time and set the expression equal to the source date/time column from SQL Server. Unfortunately, that just makes the date column and time column the same having the full date/time.
What expression can I use during a derrived column transformation to assign just the date to a derrived column and just the time to another derrived column?
Thanks,
Steve