Add A New Column To A Table With Conditions?
May 28, 2013i want to add a column to a table with conditions below :
1- it has a default value=0
2- this column can get null value
3- no constraint should be created
is it possible ?
ADVERTISEMENT
Power Pivot :: DAX Formula For Extracting A Column Value From Table Based On Certain Conditions
Jul 20, 2015I'm trying extract a column from the table based on certain Conditions: This is for PowerPivot.
Here is the scenario:
I have a table "tb1" with (project_id, month_end_date, monthly_proj_cost ) and table "tb2" with (project_id, key_member_type, key_member, start_dt_active, end_dt_active).
I would like to extract Key_member where key_member_type="PM" and active as of tb1(month_end_date).
Is this possible using DAX ?
Nested Or And AND Conditions For The Same Column
Dec 6, 2007Hello,
I would like some assistance with some code that I am attempting to write. I have one column (Mgr1FullName) that contains different values. I want it to show me all the people who has a manager name as Unavailable, Null, or blank.
Example Code:
--------------------------------------------------------------------
select uuid_hdr.id,
uuid_hdr.bizrightid,
uuid_hdr.fullname,
uuid_hdr.mgr1fullname,
uuid_dtl.role,
uuid_dtl.application,
uuid_dtl.dateremoved,
uuid_dtl.userid
from uuid_dtl
inner join uuid_hdr
on uuid_dtl.hdr_id = uuid_hdr.id
where uuid_dtl.dateremoved is Null and
uuid_dtl.application = 'SAPRET'and
uuid_hdr.mgr1fullname = 'Unavailable'or
uuid_hdr.mgr1fullname is Null or
uuid_hdr.mgr1fullname = ' ' and
uuid_dtl.userid not like 'prodsup%' and
uuid_hdr.bizrightid not like 'prodsup%' and
uuid_dtl.role not like 'z:m_genuser_vendor'
-------------------------------------------------------------------
Should I use ORs or ANDs? I will face this same problem with the ROLE column.
Thanks for all and any help.
Twyn
JOIN Efficiency Using Multiple ON Conditions Versus WHERE Conditions
Jan 10, 2008My question is fairly simple. When I join between two tables, I always use the ON syntax. For example:
SELECT
*
FROM
Users
JOIN UserRoles
ON (Users.UserRoleId = UserRoles.UserRoleId)
No problems there. However, if I then decide to further filter the selection based on some trait of the UserRole, I have two options: I can add the condition as a WHERE statement, or I can add the condition within the ON block.
--Version 1:
SELECT
*
FROM
Users
JOIN UserRoles
ON (Users.UserRoleId = UserRoles.UserRoleId)
WHERE
UserRoles.Active = 'TRUE'
-- Version 2
SELECT
*
FROM
Users
JOIN UserRoles
ON (Users.UserRoleId = UserRoles.UserRoleId
AND UserRoles.Active = 'TRUE')
So, the question is, which is faster/better, if either? The Query Analyzer shows the two queries have the exact same execution plan, which makes sense, since they're both joining the same tables. However, I'm wondering if adding the condition in the ON statement results in fewer rows the JOIN statement initially needs to join up, thus reducing the overall initial size of the results table before the WHERE conditions are applied.
So is there a difference, performance wise? I imagine that if Users had a thousand records, and UserRoles had 10 records, then the JOIN would create a cartesian product of the two tables, resulting in 10,000 records in the table before the WHERE conditions are applied. However, if only three of the UserRoles is set to Active, would that mean that the resulting table, before applying WHERE conditions, would only contain 3000 records?
Thanks for whatever information you can provide.
Transact SQL :: How To Extract Dates From A Single Column Based On Conditions
Oct 13, 2015The data I have is as follows -
ID1 ID2 Date Action
100 500 09/08/14 Open
100 500 09/24/14 Close
101 510 07/10/15 Open
101 510 07/19/15 Close
The output I want in a single result set is -
ID1 ID2 Open_Date Close_Date
100 500 09/08/14 09/24/14
101 510 07/10/15 07/19/15
Any way to do this in T-SQL .
Copy Info From One Table Two Another With Conditions
Oct 25, 2005I am importing a csv file into a temp table (works fine), now I want to take the data in the temp table based off of the temp id compared to the id of the permanant file.
basically if the record id exists skip to the next line and so forth, I am able to import everything just fine but I cannot get the WHERE condition to acually work.
INSERT INTO TABLE2 (COL1, COL2, COL3) SELECT COL1, COL4, COL7 FROM TABLE1 WHERE table2.col1 <> table1.col1
this is what my actual code is
INSERT INTO USER_INFO (fpu_id,FIRSTNAME, LASTNAME, BOXNUMBER) SELECT id,first,last,box FROM stmailbox WHERE stmailbox.id <> dbo.USER_INFO.USERID
this is the actual error that I get.
Server: Msg 107, Level 16, State 3, Line 2
The column prefix 'USER_INFO' does not match with a table name or alias name used in the query.
-----
thanks for the help
Transact SQL :: Update Table From Another With Conditions
Dec 2, 2015I am trying to do a simple update in one sql table from another where a certain condition in both tables are met.I am missing something basic and have tried numerous posted examples, without success.Here is my code (that does not update) :
opdragaliasnaaminsit.Connection = konneksie
opdragaliasnaaminsit.CommandText = "UPDATE vyfjaarontledings " & _
"SET aliasnaam = T2.aliasnaam" & _
" FROM vyfjaarontledings T1" & _
" INNER " & _
"JOIN blokke T2 " & _
" ON T1.plaasno = T2.plaasno " & _
"WHERE T1.plaasno = T2.plaasno"
opdragaliasnaaminsit.ExecuteNonQuery()
I am trying to update aliasnaam in vyfjaarontledings from blokke.
Load The Conditional Split Conditions From A Table
Apr 23, 2007Hi everybody,
I want to load the conditions for a conditional split from a table, so that the bussiness logic can be changed with a simple user interface .
How can I do this?
Best regards
John
How To Do Bulk Update / Insert In A Table With Conditions
Oct 30, 2015I have Three tables Student,Daily_Attendance_Master and Daily_Attendence_Details.
I want to run sql of insert or update of student attendence(apsent or present) in Daily_Attendence_Details based on Daily_Attendance_Master_Id and Student_Id(from one roll number to another).
If Both are present in table Daily_Attendence_Details then i want to run Updating of attendance from one roll number to another roll number in Daily_Attendence_Details on the basis of Daily_Attendence_Details_Id
And if both or any one is not present i want to run insert of student attendense from one roll number to another roll number in Daily_Attendence_Details.
I give below the structure of three tables Student,Daily_Attendance_Master and Daily_Attendance_Details.
Student:-
CREATE TABLE [dbo].[Student](
[Student_Id] [bigint] IDENTITY(1,1) NOT NULL,
[Course_Id] [smallint] NULL,
[Class_Id] [int] NULL,
[Batch_Year] [varchar](20) NULL,
[Student_Initials] [varchar](20) NULL,
[Code] ....
SQL Server 2008 :: Join Another Table But With Select Conditions?
Mar 24, 2015I have this sql....
Select
DISTINCT p.dbPatID, p.dbpatfirstname, p.dbPatLastName,
s.dbSchTypeCnt as SchDetailType, t.dbSchTypeCnt as SchTypeType,
ISNULL(r.dbStatusDesc, 'No Ref') AS dbStatusDesc,
ISNULL(t.dbSchTypeCode, 'No Ref') AS dbSchTypeCode,
ISNULL(t.dbSchTypeDesc, 'No Ref') AS dbSchTypeDesc,
[code]....
however, I only want the lastest a.dbPatApptTime and only when a.dbPFStatus = 1 and a.ClientRef = 'EPS'
So the stand alone sql could be....
Select Top(1) dbPatApptTime as LastVisitDate, dbSchTypeDesc as LastVisitDesc
from appointments
where dbPFStatus = 1 and clientref = 'EPS'
order by dbPatApptTime desc
I'm just not sure how to incorporate that into my sql or whether there is a better way,
Power Pivot :: Extracting MAX From A Table Based On Certain Conditions
Nov 20, 2015I want to calculate the target based on Flag value if Flag value is "Y" ....than MAX(Customer Target) else MAX(SLA target).Flag column contains "Y" , "N" and some blank values . Flag, Customer Target and SLA target are the columns in Table1. I have used the below formulas
Target:=IF('Table1'[ Flag]= "Y",MAX('Table1'[Customer Target]),MAX('Table1'[SLA Target]))
Target:=IFERROR(IF('Table1'[Flag]= "Y",MAX('Table1'[Customer Target]),MAX('KPI'[SLA Target])),BLANK())
T-SQL (SS2K8) :: Selecting Data From Table With Multiple Conditions On Multiple Columns
Apr 15, 2014I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car
where Price=@Price1 or Price=@price2 or Price=@price=3
and
where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3
and
where Model=@Model1 or Model=@Model2 or Model=@Model3
and
where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
How Can I Create A New Table With Its Column Named From Another Table's One Column Value By Using A Select Sentence?
Sep 27, 2006For example,I have a table "authors" with a column "author_name",and it has three value "Anne Ringer,Ann Dull,Johnson White".Here I want to create a new table by using a select sentence,its columns come from the values of the column "author_name".
can you tell me how can I complete this with the SQL?
A Table/column To Table/column Data Check (was Help Please, SQL Something Simple)
Sep 15, 2006Hi all, I am not over familiar with SQL, I am a VB programmer, simply I need to achieve the following within Enterprise Manager.
I have 2 tables, different designs, different number of rows, I simply need to check whether the contents of a column in the first table is in a column in the second table, just simply a table/column to table/column data check for the same data content.
Easy Peasy for you guys, any help would be appreciated.
How To Create Key Time Column And Key Column For A Case Table And A Nested Table For Time Series Algorithm?
Jun 18, 2007Hi, all experts here,
Thanks for your kind attention.
I want to use time series algorithm to mine data from my case table and nested table. Case table is Date table, while nested table is the fact table. E.g, I want to predict the monthly sales amount for different region (I have region table related to the fact table), how can I achieve this?
Thanks a lot and I hope it is clear for your help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Questions On Key Column In Case Table And Key Time Column In Nested Table Using Time Series Algorithm
Jun 4, 2007Hi, all experts here,
Thank you very much for your kind attention.
I am confused on key column of case table and key time column of nested table by using Time Series algorithm.
In my case, the case table structure is as below:
Territory key text (the ID is actually dimrisk_key, in this case, I use the name column binding to combine the Territory column of case table Dimrisks),
While the nested table structure is as below:
Cal_month key time (in this case, actually the ID is dimdate_key, again, I used name column bining property to bind the Cal_month to the ID)
So my question is, as the key column of case table has been set to be Territory, as a result, does the model training still cover all the cases (rows) based on the ID of the table?
Also, in the nested table, as the key time column has been set to Cal_month rather than Dimdate_key of the nested table, as a result, would the single series based on the cal_month?
Hope it is clear for your advices and help.
And I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
TSQL - Using ALTER TABLE - ALTER COLUMN To Modify Column Type / Set Identity Column
Sep 7, 2007Hi guys,
If I have a temporary table called #CTE
With the columns
[Account]
[Name]
[RowID Table Level]
[RowID Data Level]
and I need to change the column type for the columns:
[RowID Table Level]
[RowID Data Level]
to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time.
What will be the right syntax using SQL SERVER 2000?
I am trying to solve the question in the link below:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1
Thanks in advance,
Aldo.
I have tried the code below, but getting syntax error...
ALTER TABLE #CTE
ALTER COLUMN
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
I have also tried:
ALTER TABLE #CTE
MODIFY
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
ALTER TABLE DROP COLUMN LastUpdated Failed Because One Or More Objects Access This Column.
Mar 7, 2008Hi I’m trying to alter a table and delete a column I get the following error. The object 'DF__Morningst__LastU__19EB91BA' is dependent on column 'LastUpdated'.
ALTER TABLE DROP COLUMN LastUpdated failed because one or more objects access this column. I tried deleting the concerned constraint. But the next time I get the same error with a different constraint name. I want to find out if I can dynamically check the constraint name and delete it and then drop the column. Can anyone help.IF EXISTS(SELECT 1FROM sysobjects,syscolumnsWHERE sysobjects.id = syscolumns.idAND sysobjects.name = TablenameAND syscolumns.name = column name)BEGIN EXECUTE ('ALTER TABLE tablename DROP CONSTRAINT DF__SecurityM__DsegL__08C105B8')EXECUTE ('ALTER TABLE tablenameDrop column columnname)ENDGO
Exclude Records From A Table Where ID Column Is Same But Mail Code Column Is Multi-valued
Nov 12, 2012I am trying to exclude records from a table where the ID column is the same but the Mail code Column is multi-valued.For Example: (the table looks like....)
ID Mail_code
111111 XNT
111111 N11
111111 XNC
222222 XNC
222222 XNL
333333 XNC
So, if there is any ID that has a value of XNC, I want to exclude the ID all together from my output regardless of the other values.
SQL Server 2012 :: Subtract / Exclude Value Items From A Column And Add It To Another Column In Same Table
May 26, 2014I got a sales cost and cost amount table for my budget. the sales cost table is getting updated with FOBB items which makes the total incorrect . the FOBB values needs to be moved from the sales cost column to the cost amount column. how can i do it with an SQL script.
View 1 Replies View RelatedCannot Insert The Value NULL Into Column SnapshotDataID, Table ReportServerTempDB.dbo.SessionData; Column Does Not Allow Nul
May 3, 2007I receive this message when I try to run any report. The reportserver and reportservertempdb databases were upgraded using backup/restore from SQL2000 to SQL2005 on a separate server which is running RS2005 . Please help. Thanks
View 1 Replies View RelatedTransact SQL :: SUM Of Two Table Column Base On Another Column Value And SUBTRACT And Join Tables
Oct 14, 2015I have the following table
Table Name EmployeeInformation
EmployeeID EmployeeFirstName EmployeeLastName
1 |John |Baker
2 |Carl |Lennon
3 |Marion |Herbert
Table Name PeriodInformation
PeriodID PeriodStart PeriodEnd
1 |1/1/14 |12/30/14
2 |1/1/15 |12/30/15
[code]...
I want a query to join all this tables based on EmployeeID, PeriodID and LeaveTypeID sum of LeaveEntitlement.LeaveEntitlementDaysNumber based on LeaveTypeID AS EntitleAnnaul and AS EntitleSick and sum AssignedLeave.AssignedLeaveDaysNumber based on LeaveTypeID AS AssignedAnnaul and AS AssignedSick and subtract EntitleAnnaul from AssignedAnnual based on LeaveTypeID AS AnnualBalance and subtract EntitleSick from AssignedSick based on LeaveTypeID AS SickBalance
and the table should be shown as below after executing the query
EmployeeID, EmployeeFirstName, EmployeeLastName, PeriodID, PeriodStart, PeriodEnd, EntitleAnnual, AssignedAnnual, AnnualBalance, EntitleSick, AssignedSick, SickBalance
SQL Server 2012 :: Format Value Of A Column And Insert It Into Another Column Of The Same Table?
Sep 18, 2014A column of a table has values in the format - 35106;#Grandbouche-Cropp, Amy.
I need to format the column data in such a way that only the text after # (Grandbouche-Cropp, Amy) remain in the column.
The text before ;# (35106) should be inserted in to another column of the same table.
Below is the table structure:
create table [HR_DEV_DM].[CFQ_TEST].sp_CFQ_Commercial_Referrals
(
ID int identity,
PromotionalCode nvarchar(4000),
QuoteNumber nvarchar(100),
CreatedBy nvarchar(100),
Created datetime,
ModifiedBy nvarchar(100),
Modified datetime,
CreatedBy_SalesRepSharePointID int,
ModifiedBy_ModBySharePointID int
)
SQL Server 2008 :: Create Table / Set Default Column Value To Value Of Another Column?
Mar 11, 2015when creating a new table. How can I set the default value of the column to equal the value of another column in the same table?
View 5 Replies View RelatedNested Table Key Column Is Not Bound To An Input Rowset Column
Jan 11, 2008Hi!
I have a "little" problem with nested case model:
-- "normal" database:
DROP TABLE [unitInfo] ;
GO
CREATE TABLE unitInfo (
unitID INT PRIMARY KEY
, beginDate SMALLDATETIME
, area VARCHAR(10)
, partSize INT
, y2predict MONEY
) ;
go
INSERT INTO unitInfo
VALUES (1, '2007-02-01', 'home', 42, 10.0) ;
INSERT INTO unitInfo
VALUES (2, '2007-03-05', 'home', 43, 11.0) ;
INSERT INTO unitInfo
VALUES (3, '2007-02-02', 'office', 11, 11.4) ;
INSERT INTO unitInfo
VALUES (4, '2007-02-01', 'office', 10, 33.6) ;
INSERT INTO unitInfo
VALUES (5, '2007-02-01', 'office', 42, 44.1) ;
CREATE TABLE unitLog (
id INT IDENTITY(1, 1)
PRIMARY KEY
, logtime SMALLDATETIME
, -- combination of logtime/unitID is unique
unitID INT
, -- "FK" on unitInfo
m1 FLOAT
, m2 FLOAT
)
INSERT INTO [unitLog]
VALUES ('2007-01-01', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-01', 2, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-01', 3, 63.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-02', 4, 432.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-02', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-03', 1, 423.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-04', 1, 432.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-05', 2, 43.0, 441.0)
INSERT INTO [unitLog]
VALUES ('2007-01-06', 2, 43.0, 4.0)
INSERT INTO [unitLog]
VALUES ('2007-01-06', 3, 43.0, 4.0)
INSERT INTO [unitLog]
VALUES ('2007-01-07', 1, 4.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-08', 1, 3.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-08', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-08', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-09', 2, 143.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-10', 3, 143.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-11', 4, 43.0, 144.0)
INSERT INTO [unitLog]
VALUES ('2007-01-11', 5, 43.0, 144.0)
INSERT INTO [unitLog]
VALUES ('2007-01-12', 2, 43.0, 144.0)
INSERT INTO [unitLog]
VALUES ('2007-01-13', 4, 413.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-14', 4, 43.0, 414.0)
INSERT INTO [unitLog]
VALUES ('2007-01-14', 1, 43.0, 44.0)
INSERT INTO [unitLog]
VALUES ('2007-01-20', 1, 43.0, 414.0)
INSERT INTO [unitLog]
VALUES ('2007-01-22', 1, 43.0, 414.0)
-- SSAS:
CREATE MINING STRUCTURE NestedStructure
( unitID LONG KEY, beginDate DATE CONTINUOUS, area TEXT DISCRETE
, partSize LONG CONTINUOUS, y2predict DOUBLE CONTINUOUS
, logdata table ( [id] LONG KEY, unitID LONG CONTINUOUS
, m1 DOUBLE CONTINUOUS, m2 DOUBLE CONTINUOUS
)
)
ALTER MINING STRUCTURE NestedStructure
ADD MINING MODEL nestedModel ( unitID , beginDate REGRESSOR, area , partSize REGRESSOR
,y2predict REGRESSOR PREDICT_ONLY
, logdata ([id] , unitID
, m1, m2
)
) USING Microsoft_Decision_Trees
/* version 1*/
insert into NestedStructure ( unitID, beginDate, area, partSize, y2predict
, logdata(skip,unitID, m1, m2))
openrowset('sqloledb', Server=myserver;Trusted_Connection=yes;,
'Shape {select * FROM mydb.dbo.unitInfo }
Append ( { select id, unitID, m1, m2 from mydb.dbo.unitLog }
Relate unitID to unitID ) as logdata ')
Parsing the query ...
OLE DB error: OLE DB or ODBC error: Syntax error or access violation; 42000.
Parsing complete
Where is the error?
/*version 2*/
CREATE MINING STRUCTURE NestedStructure1
( unitID LONG KEY, beginDate DATE CONTINUOUS, area TEXT DISCRETE
, partSize LONG CONTINUOUS, y2predict DOUBLE CONTINUOUS
, logdata table ( [id] LONG KEY, unitID LONG CONTINUOUS
, m1 DOUBLE CONTINUOUS, m2 DOUBLE CONTINUOUS
)
)
ALTER MINING STRUCTURE NestedStructure1
ADD MINING MODEL nestedModel1 ( unitID , beginDate REGRESSOR, area , partSize REGRESSOR
,y2predict REGRESSOR PREDICT_ONLY
, logdata ([id] , unitID
, m1, m2
)
) USING Microsoft_Decision_Trees
insert into mining structure NestedStructure1 ( unitID, beginDate, area, partSize, y2predict
, logdata(skip,unitID, m1, m2))
Shape {openquery(dsnDB,'select * FROM mydb.dbo.unitInfo') }
Append ( { openquery(dsnDB,'select id, unitID, m1, m2 from mydb.dbo.unitLog') }
Relate unitID to unitID ) as logdata
Parsing the query ...
Error (Data mining):
INSERT INTO error: The '[logdata].[id]' nested table key column is not bound to an input rowset column.
Parsing complete
Remark that combination logtime/unitID is the natural key in unitLog.
"ID" is the surrugate key.
What is wrong here...?
Derive A Column Based On Other Derived Column In A Table .. Is It Possible ?
Mar 25, 2008
Table structure as follows
Employee
Empno empname salary
commission
I want to have an other employee table named employee_modified
Empno empname salary
commission derived_column1(salary+commission)
derived_column2(derived_column1 + xxxx) and so on derive other
columns based on the earlier derived columns)
Is that possible to do it.. or am I doing something wrong.
something like
Select empno , empname , salary , commission,
(salary + commission) as derived_colum1 ,
(derived_colum1 + xxxxx) as derived_colum2 ,
(derived_colum2 + xxxxx) as derived_colum3
into employee_modified from employee
Table Column Names = Dataset Column Values?!
Apr 28, 2008
I need to create the following table in reporting services
PRODUCT April March Feb
2008 2007 2008 2007 2008 2007
chair 8 9 7 4 4 4
table 3 4 5 6 4 6
My problem is the month names are a column in the dataset, but I dont know how to get it to fill as column headers???
Thanks in advance!!!
Transact SQL :: Get Table And Column Name In Separate Column Using PIVOT
Jul 16, 2015Is there a way we can get Table and Column name in separate column using PIVOT or something?Right now what i have is:
Text QueryPlan Plan_handle
Name Value
select id,name,Address from person <showPlznXML... 010101 Table Person
select id,name,Address from person <showPlznXML... 010101 column id
select id,name,Address from person <showPlznXML... 010101 Table Person
[code]....
Alter Table Add Column - How Do You Add A Column After Say The Second Column
Jul 11, 2007
When you use "Alter Table add Column", it adds the column to the end of the list of fields.
How do you insert the new column to position number 2 for instance given that you may have more than 2 columns?
Create table T1 ( a varchar(20), b varchar(20), c varchar(20))
Alter table add column x varchar(20)
so that the resulting table is
T1 a varchar(20), x varchar(20), b varchar(20), c varchar(20)
Can this be done programmatically?
Populate GUID Column In Table B With Values From GUID Column In Table A
Mar 4, 2008
How do I update the OrderGUID column in Table B with Values from OrderGUID column in Table A. I have already populated the OrderGUID column in Table A using NEWSEQUENTIALID(). Now I need to populate the OrderGUID column in Table B with Matching GUID values from the OrderGUID Column in Table A.
Does any one have a script to accomplish this task. thanks
Alter A Column To Be The Table Identity Column
Aug 3, 2006i have a table
table1
column1 int not null
column2 char not nul
column3 char
i want to script a change for table1 to alter column1 to be the table identity column. not primary.
Insert Column Concatenated For Each Column In Another Table
Jun 13, 2012I have a table where one column is an id card number (col1) and another is another column (col2). In col2 I have various values for each col1 ie col1 can have various values of col2. How can i insert col1 concatenated for each col1 in another table?
View 2 Replies View RelatedSelect Column Value Which Is Selected From A Column Of Another Table
Jan 2, 2004i need help to get the value of a column which is selected from a column of another table....
View 3 Replies View Related