Hi there,
I have a case. I have 3 numeric fields and 1 category field to be displayed on bar chart reports. the problem is 2 of the 3 numeric fields have significant different scale value. so I need to add additonal scale at the right side of bar chart to represent 1 numeric fields + the 2 other numeric fields at the left side scale (Y). Please advice. Thanks.
R'gards
Toni
I have an stacked chart with line with markers. The scale on the right side is the finished good which has a min qty of 383 while the highest is 52439. how can i set this scale that start from 0 to 300 and soon. right now under scale properties I set the max to 60000, the min is set to auto while in the interval properties i set this to 10000. How this line marker adjust the scale quantity (fisnished good).
View 2 Replies View Related
Can you have different scales on a bar chart. I want to chart sales and quantity. Oracle lets you label the top of the bar chart as money and the bottom as quantity.
I am dividing my sales by one million and quantity by one thousand to make them similar in size on the same chart. I am using the sum of the sales/1000000 as a point label. Is there any way to limit the number of decimal places displayed. Currently it is displaying something like 1.94889312043; 1.95M would be better.
Thank you.
Hi
I need to scale barchar or any other chart in sql server 2000
i need to know the possiblity of this in SQl 2000
Regards
I have a stored procedure which will bring me back the Min, Max and Mean of different result sets. What I want to do with the Y-Axis is set the Min scale value of the chart to be Min -%5 and the Max scale value to be Max + 5%.
Is there a way to change the Y-Axis values at report run time without spitting my own RDL?
Is there a possibility in SSRS to have One stacked bar of cumulative sum of different ID's and and Line Chart at left hand of the Bar which will show the Progress as soon as the ID turn to Competed status.
I have been trying to do this , however there is huge problem of scaling:
The line should be finished at all the completed ID's SUM which is the lowest stack of the Bar.
However , the bar gets stretched to all of the space.
I have tried to place it into Tab lix, But it doesn't work.
Hi,
I have a report based on a line chart.
The values on X-axis are scaled from -100 to +100. I want to colour the band from -100 to 0 with red colour and that from 0 to +100 in green colour, and i want to provide legend for these bands/sections. How can i do this?
A prompt response would be really appreciated
Thanks a lot!!
Simranjeev
Hello,
I need to know what means are available to change the Minimum and Maximum Y-Axis scale values rather than leave them simply as they are in the properties.
Right now whatever min/max values I enter into the scale for the Y-Axis are unchangeable.
I need to be able to change the min/max scale values based on the value of the data at run time.
Any help is appreciated.
Thanks.
I have a line chart which works great except when the x axis displays duplicate months. I have tried format codes of MM-YYYY and MMM and have the "numeric or time-scale values" checkbox checked. The data displays fine but the X axis in the case of the MMM format code displays as:
Sep Oct Oct Nov Nov
leaving the user to wonder where exactly does October and November start...
I've googled around but don't see off-hand what I am doing wrong. I am display 3 simultaneous lines if that matters...
Thanks!
Craig
I'm using a bullet chart in a SSRS report and I want to set the Maximum value in the Linear Scale properties to highest value of the following 4 fields. Is there any way to do this?? This will make all charts line up properly.
NC_LAST_YEAR
NC_LINKED
NC_CURRENT
NC_PLAN
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
When I export the report in excel format the chart is displayed as picture. I want it to be displayed as editable chart.Does Office Writer work in this situation and did anyone use Office Writer to accomplish same type of problem.Is there any other method or product we can use instead of the office writer.
View 2 Replies View RelatedI have a main report that has 17 sub-reports in it. I have had some problems with additional space in the main report, after sub-reports that have no data in them. In the actual sub reports I have expressions set up for each line in the tables to hide the row if there is an empty string in it. (IIF(Fields!FieldName.Value = "", True, False)).
Is there a way to set up in the main report is the sub report has no data in it to hide the sub-report, and not show the additional space in them. I have tried putting the sub reports in the main report by themselves, and also put them into a table, and have encountered the same results each time.
I did find a site that suggests referencing a Field in the expression for that row, but this would involve us changing the stored procedure and adding additional Fields into the main report stored procedure. Also each sub-report has its own stored procedure to return the data needed for that sub report.
Any ideas?
I have a question about Report services scale out deployment.
In the technet document it states that reporting services must be Enterprise edition for scale out deployment functionality, does anyone know if the database engine has to be Enterprise also, or can it be standard edition?
Here is the article excerpt from technet:
The Reporting Services edition must be Enterprise, Developer, or Evaluation. Standard edition does not support a scale-out deployment. You can create a scale-out deployment using a combination of editions as long as the edition supports the scale-out feature.
Future guru in the making.
Hi,
I have been trying to get report services installed but another error came:
The feature: "Scale-out deployment" is not supported in this edition of Reporting Services. (rsOperationNotSupported) (rsRPCError)
This error comes when I try to view either http://localhost/Reports or http://localhost/reportserver
Any suggestions?
thank you.
I am facing the following issue that i am unable to select additional options from drop down.
View 2 Replies View RelatedI'm somewhat new to report builder and have been trying to recreate a report previously created in an Excel Pivot Table. I'm encountering an issue arranging the data the way it's arranged in Excel.
Specifically, I would like the values column to precede an additional column.
Until I can post pictures I'll have to try and mock it:
COLUMNS
Values
Results (my data I want as a 2nd column)
I can't figure out how to get report builder to do it the same way. Whenever I add the 'Result' data as a column it always appears on top. I'm guessing what I need to do is somehow get result set as a child of the first Static group, but I'm unsure how to do that.
I am develping this report using Microsoft Visual Studio .Net 3.0. I added Chart to the report.
All I need is the simple 'x' axis and 'y' axis in the chart.
x need to be the Date
y need to be the ValueOFTheDate
date ValueOFTheDate
-------------------------------------------------------------------------------
1/1/2007 10
1/1/2007 11
1/2/2007 2
1/3/2007 1
Which one should be my Data fields?
Which one should be my Category Fields?
I don't think I need "Series Field". But the "ValueOFTheDate" was keeping showing as "Series Field".
The value of 'y' axis shows the value of "#of record for the date" which is wrong.
Thanks.
hi there
I am just designing a simple chart in Report Builder - but when trying to drag any field into the value field of the chart (it doesn't change colour and won't accept any field).
If I drag a field into the category or series the curser changes and on approaching the chart properties they seem to change colour.
Can someone help to what can be wrong?
thanks
Dianne
Hi,
Is there a way to set the visibility of a chart as can be done for a textbox or table or matrix?
My requirement is that the chart should be visible only if certain data conditions are met.
Regards,
Emil
Hi, I've just started using Pie Charts and I'm stuck on a value problem (I think!). My category will be "Connection Status", and the values can be: success:human; success:machine; Connected; Null.
What I want to do is merge the "success:human" and "connected" values into one slice of pie. Is this possible?
Thank you, Dan
Does anyone know how to create a bar chart in which the x-axis is dynamic (meaning I can have 0+ bars) and have the width of the bar being a fixed size?
View 1 Replies View RelatedHi,
How do i change chart data on click of drilldown in ssrs 2005 .
If any one know please help....
Hi All,
I am using SQL Server 2008 Reporting Services Charts. I am using Chart Type as Column (3-D Cluster Cylinder). I am using X axis of graph as Time/Date field. I have two questions while displaying report in desired format:
1. Currently I have grouped Category field on Date field fetched from database. It groups values per day. Now whenever there is no data for a particular date, it skips that date in chart. How can I show each and every date on report graph in user given date range?
2. If there is no data for a legend of a chart, how can I display a Bar in Chart with value 0. This means, I have to show Bar with Zero value.
Currently if I Show data labels of Chart, it just shows data for 0 value but does not show Bar with 0 value which could be residing as flat on X axis for a particular legend.
Please help me resolving this issues for Chart graphs.
Please let me know if you need any more details.
Thanks in Advance.
Regards,
Ashwin B
Hi to everyone.I have this problem in my chart control in report.I am retrieving datas from my database.My x-axis is consist of dates of the year,y-axis is the hit counts.My problem here is when i only have hits in only one month(ex december) and almost over 20 hits are retrieved,the bars of my graph become so overcrowded and overlayed which make the value unclear to see.And also another thing is my legend repeats the color when there are too much data.is there anyway to fix this or this is just a ReportingService bug??Hope not..hehe.. Thanx
View 4 Replies View RelatedHi, all experts here,
Thank you very much for your kind attention.
I have a question about how to have multiple chart options for a report? Like when I view a report, I want to see the report in different charts formats. It is possible in SQL Server 2005 Reporting Services (designer) to change from different chart options? Hope my question is clear for your advices.
Thank you very much in advance for your help and advices. And I am looking forward to hearing from you.
With best regards,
Yours sincerely,
Hi,
I am trying to display a line chart with cumulative totals over period of 12 months in a fiscal year. I know this can be achieveable in report designer using "Running value function".
Any idea how to achieve the same in Report builder ?
thanks in advance.
Here is the data :
Month Count
July 2
Aug 3
Sept 2
Expected output should be
Month Count
July 2
Aug 5(July count + Aug.Count)
Sept 7(July count + Aug count + Sept Count)
Regards,
bala
Is changing the display format of the Y axis of a column chart supported in the Sept CTP or is it going to be supported in the official release? For example I have built a report model with the numeric sales values set as 'C' for currency and have created a simple bar chart with year on the category axis and sales on the Y axis. The problem is that the Y axis displays as a general number (10000000) and would like to display it as a currency ($10,000,000). I can't for the life of me figure out how to display the Y axis as currency in Report Builder.
View 2 Replies View Related
Hi everyone, I have created a matrix report which takes 3 parameters being store, year and quarter which then displays budget information in a matrix. This all works fine but I would also like to have a bar chart below the matrix to visually show the results.
However when I add the bar chart and add the relevent dataset details etc the chart does not appear when I preview the report. I wondered if the chart wasn't showing because the parameter values are not being passed to the chart.
Has anybody any idea of adding charts to reports in this way or knows of any instructions to do so.
Thanks
Sally
I have a table in the report. One of the columns is the result of a variable. It is the maximum value of a field that is grouped.I need to chart the maximum values and use a different group for the values.
For example:
In the data set is the following information:
Furnace # Heat # Frame Avg Window Avg
then the table has the following:
Heat # Max Frame Avg Max Window Avg
I need to graph the Max Frame Avg and the Max Window Avg on separate graphs.
I have a requirement associated with SSRS bar chart.
Data in my DB is like shown below:
A
B
C
Opt1
Data1
10
Data2
20
Opt2
Data1
30
Data2
40
Opt3
Data3
50
Now I would like to build up a bat chart which should have:
Legends: Opt1, Opt2, and Opt3
Categories:
Data1(showing bars with scores as 10 and 30),
Data2 (showing bars with score 20 and 40),
Data3 (showing bar with scores 50 only)
Hi, all experts here,
Thank you very much for your kind attention.
I am having a question about how can I put a chart and a table in a same page of my report? And let the same parameters passed between them? Is it possible in SQL server 2005 Reporting Services? Please would any experts here shed me any light on it?
Thank you very much in advance and I am looking forward to hearing from you.
With best regards,
Yours sincerely,
Hi
please excuse my ignorance but if someone could point me in the right direction i would be grateful.
i have produce a chart with some data against date points on x axis. i have another date field which i want to combine with the orignal date axis is this possible .
ie
table
results planned date Acutual date
10 02/03/07 01/03/07
46 03/03/07 03/03/07
60 06/03/07 07/03/07
i want to combine the planned date and actual date as an x axis
thanks