Add Node To Sql 2005 Failover Clusters Hangs
Feb 2, 2008
Hello,
I wanted to instal sql server 2005 on our sql 2000 failover cluster.
The first thing i did was deinstal sql 2000.
The installation hangs on the dialog screen configuring components and does not present een error.
If i install the cluster with one node there's no problem.
But if i want to add the second node the installion hangs.
When i go to the second node and stop the scheduled task the installations stops.
Do you have any suggestion
View 1 Replies
ADVERTISEMENT
Jul 23, 2015
We have 2 nodes window Server 2012 R2 and SQL Server 2012 Enterprise Version cluster setup. We can switch roles and Node to one node to another and revert back to previous node with out any issues. But we are facing when one Node is restarted. We could not restart that Node in cluster Service start in Failover cluster Manager. Error Details is displayed as below inside double code."Cluster node NODE1 could not to join the cluster because it failed to communicate over the network with any other node in the cluster. Verify the network connectivity and configuration of any network firewalls."
I checked windows firewall. windows firewall is all of in Node1, Node2, SAN and DC.I have disabled and enabled the Internal and private network of Node 1. I have validated the cluster. it is showing no error though.
Node1:
Public IP: 10.10.0.11
SubNet Mask:255.255.255.0
Default Getway: 10.10.0.1
Prefered DNS: 10.10.0.10 (Ip of DNS)
[code]....
Private Network: Not configured.pinging to each other ip is successful from one node to another.
View 9 Replies
View Related
Jun 30, 2015
I have a 3 node 2014 AlwaysOn setup. The primary and secondary are set for automatic failover. The third node, of course, is manual (until 2016). The 2 nodes with are automatic are sitting in one datacenter, the third is in another. If the first datacenter was to go down, I would manually have to failover to the third node? What's the normal process here for having two datacenters and ensuring the availability group is always available?
View 3 Replies
View Related
Jan 3, 2010
I'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.
View 30 Replies
View Related
Aug 24, 2006
When performing a failover the DriverManager.getConnection method never returns from it's call. I used a modified version of the test program included in the sqljdbc help file (below). If the principle server is server2 and a failover is performed, the program works just fine. If the priciple server is server1 and a failover is performed, the hang occurs. The sql servers are not on a domain, are in the same workgroup, have certificates setup between them. Sqljdbc version used is 1.1.1501.101. I rolled back to version 1.1.1320.0 and the DriverManager.getConnection exceptioned. Not sure if this is a setup issue or a common problem. Anyone have any suggestions or seeing similar issues?
Thanks
- tc
Version 1.1.1501.101 - System hangs on DriverManager.getConnection method.
Version 1.1.1320.0 - Exception:
java.nio.channels.UnresolvedAddressException
at sun.nio.ch.Net.checkAddress(Net.java:30)
at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:451)
at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
at com.microsoft.sqlserver.jdbc.DBComms.<init>(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithFailover(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:193)
at testconnection.Main.Execute(Main.java:115)
at testconnection.Main.main(Main.java:35)
/////////////////////////////////////////////////////////////////////////////
package testconnection;
import java.sql.*;
public class Main
{
/** Creates a new instance of Main */
public Main()
{
}
/**
* @param args the command line arguments
*/
public static void main(String[] args)
{
int i = 0;
while(true)
{
Execute(++i);
try
{
Thread.sleep(5000);
}
catch(Exception e)
{}
}
}
private static void Execute(int iteration)
{
// Create a variable for the connection string.
String connectionUrl = "jdbc:sqlserver://server1;" +
"databaseName=TestDb;integratedSecurity=true;" +
"failoverPartner=server2";
// Declare the JDBC objects.
Connection con = null;
Statement stmt = null;
try
{
System.out.println("(" + iteration + ") Connection Test");
// Establish the connection to the principal server.
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
System.out.println(" Get Connection.");
con = DriverManager.getConnection(connectionUrl);
System.out.println(" Connected to the principal server.");
// Create and execute an SQL statement that inserts some data.
stmt = con.createStatement();
ResultSet rs = stmt.executeQuery("SELECT * FROM TestTable");
System.out.println(" SUCCESS");
while(rs.next())
{
System.out.println(" Record: " + rs.getString("Field1"));
}
}
// Handle any errors that may have occurred.
catch (SQLException se)
{
try
{
// The connection to the principal server failed,
// try the mirror server which may now be the new
// principal server.
System.out.println(" Connection to principal server failed, " +
"trying the mirror server.");
con = DriverManager.getConnection(connectionUrl);
System.out.println(" Connected to the new principal server.");
stmt = con.createStatement();
ResultSet rs = stmt.executeQuery("SELECT * FROM TestTable");
System.out.println(" SUCCESS");
while(rs.next())
{
System.out.println(" Record: " + rs.getString("Field1"));
}
}
catch (Exception e)
{
System.out.println(" FAILED");
e.printStackTrace();
}
}
catch (Exception e)
{
e.printStackTrace();
}
// Close the JDBC objects.
finally
{
if (stmt != null) try { stmt.close(); } catch(Exception e) {}
if (con != null) try { con.close(); } catch(Exception e) {}
}
}
}
View 15 Replies
View Related
Mar 27, 2015
y'day we faced situation one of the primary server went down and unable to failover the services to second node . by checking in logs we found
Cluster network 'Public' is partitioned. Some attached failover cluster nodes cannot communicate with each other over the network. The failover cluster was not able to determine the location of the failure. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
View 7 Replies
View Related
Sep 29, 2015
if for any reason AG fails over to async node, how replication behaves? As data will not be in sync with previous primary replica, how replication will work? I think that we have to reset replication from scratch as there's a high chance subscribers might be more updated than current primary replica as failover to this node causes data loss. How to keep replication in sync without resetting up? Can we achieve this?
View 5 Replies
View Related
Jun 24, 2015
I have destroyed the cluster in failover cluster manager and then i am trying to remove node from the sql server installation centre.I am facing the cluster node and cluster service verification errors.I am not able to start the cluster service in services as well.
View 4 Replies
View Related
Oct 19, 2010
Server : Windows server 2008
DB Server : SQL Server 2008 (SP1)
Here are the series of events which happened.
1.) Event ID: 1135
Cluster node 'XYZ' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
2.) Event ID: 1049
Cluster IP address resource 'SQL IP Address 1 (XYZ)' cannot be brought online because a duplicate IP address '10.9.8.113' was detected on the network. Please ensure all IP addresses are unique.
3.) Event ID: 1069
Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
4.) Event ID: 1049
Cluster IP address resource 'Cluster IP Address' cannot be brought online because a duplicate IP address '10.9.8.112' was detected on the network. Please ensure all IP addresses are unique.
5.) Event ID: 1069
Cluster resource 'Cluster IP Address' in clustered service or application 'Cluster Group' failed.
6.) Event ID: 1066
Cluster disk resource 'Cluster Disk 25' indicates corruption for volume '?Volume{88552e6f-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 25_Disk16Part1.log'. Chkdsk may also write information to the Application Event Log.
7.) Event ID : 1066
Cluster disk resource 'Cluster Disk 26' indicates corruption for volume '?Volume{88552e05-aea2-11df-9790-0026b92fffa7}'. Chkdsk is being run to repair problems. The disk will be unavailable until Chkdsk completes. Chkdsk
output will be logged to file 'C:WindowsClusterReportsChkDsk_ResCluster Disk 26_Disk4Part1.log'. Chkdsk may also write information to the Application Event Log.
8.) Event ID: 1049
(Same message as point 2)
9.) Event ID: 1069
(Same message as point 3)
10.) Event ID : 1049
(same message as point 4)
11.) Event ID :1069
(same message as point 5)
12.) Event ID :1205
The Cluster service failed to bring clustered service or application 'Cluster Group' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
13.) Event ID: 1069
Cluster resource 'Cluster Disk 17' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
14.) Event D : 1049
(same message as point 2)
15.) Event ID: 1069
Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.
16.) Event ID : 1205
The Cluster service failed to bring clustered service or application 'SQL Server (MSSQLSERVER)' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
first of all,I went through all the logs, and could not find the reason for fail-over initialization. There should be some thing logged why the failover happened? secondly after failover the service was not coming online due to duplicate IP address detection.
Later when we try to manually bring the service online from cluster management it comes online successfully. I don't understand how would duplicate IP address get resolved when we start manually.
Lastly we see few errors related to physical disk resource between failover retries, is this could be the correlated to failover error ?
View 4 Replies
View Related
Feb 18, 2015
I am trying to install SQL Server 2012 onto an already configured and validated windows failover cluster (server 2012) but the process is hanging after installing the setup files.
The last entry in the log is:
running discovery on remote machine
and I've left it hanging like this for 4 hours and nothing happens.
View 2 Replies
View Related
Aug 25, 2015
I am running SQL 2014 2-node AlwaysON Availability groups, Enterprise Edition in our environment and 5 databases are part of AG.
Question is, sometimes AG is getting failed over to node2 but always our preferred node is node1 due to some business needs otherwise some of our jobs will fail.
So, what I looking for is, a sql script which can handle a situation wherein, for some reason, AG is failed over to node2, it should be able to detect if node1 is back online or not and if so, it should fail back to node1. How to do this using tsql query or stored proc or sql agent job ?
View 4 Replies
View Related
Sep 26, 2007
I have a Microsoft Cluster running on Server 2003 Entrprise. SQL 2000 8.00.2039 (SP4). 5gb physical memory installed.
With the databases online we run a test failover from the Cluster administrator. It takes about 30-40 seconds and completes without generating any Server Event log errors nor SQL log errors. Everything looks good from an administrative stand point.
However, when we test with running a series of queries to the databases, then failover, we notice that it can take up to 3 or 4 minutes before some of the databases will respond. Connections are not refused, they just sit there.
How can we troubleshoot this or does anyone have a similiar experience with this scenario?
View 5 Replies
View Related
Nov 16, 2007
I am supporting 2 node cluster sql 2005 servers (Windows 2003 computers). Active and passive cluster.
Right now sql services are running under local system account , as per standard should be run on sql service account.
So please let me know how to change, with out impacting the application
Can i directly change sql services to service account on passive node ?
Please help me anyone on this task.
View 3 Replies
View Related
Nov 21, 2007
I have been reading through many postings here, through the MS SQL Server Unleashed book by SAMS, the MS SQL Tech article "Failover clustering for Microsoft SQL Server 2005 and SQL Server 2005 Analysis Services" for installing a brand new SQL 2005 2 node cluster.
So far I have not found the definitive answer that I am looking for and that is, what rights does the SQL service account need to work properly? One article states that it needs both Domain Admin permissions and local admin permissions (and this is a domain account by the way) and then another article states that it only needs domain users group permissions and the least amount of privledges possible.
Can anyone please tell me what is correct for installation and running the server? The more I read about this the more confused I get.
Please be patient as I am brand new to SQL.
Thank you very much!
View 3 Replies
View Related
Jul 27, 2007
Hello Everyone,
Does SQL Server 2005 has a counterpart to Oracle 10G's Real Application Clusters (RAC)?
http://www.oracle.com/technology/products/database/clustering/index.html
Regards,
Joseph
View 3 Replies
View Related
Jul 27, 2007
Hello Everyone,
Does SQL Server 2005 has a counterpart to Oracle 10G's Real Application Clusters (RAC)?
http://www.oracle.com/technology/products/database/clustering/index.html
Regards,
Joseph
View 1 Replies
View Related
Apr 20, 2015
I have not used log shipping before and find myself in a position where I need to reboot the secondary node and then the primary node and I don't actually need to failover.
Is there anything I need to be aware of. When rebooting the secondary node I assume the transactions will be held in the primary nodes log till the secondary comes back and just carry on once back up?
When rebooting the primary node nothing needs to be done and the log shipping will just start again once it has come back?
View 3 Replies
View Related
Jun 12, 2007
I read these instructions:
http://msdn2.microsoft.com/en-us/library/ms191545(SQL.90).aspx
But I'm not sure if I have to install SQL Server first on node 2, then add it to the cluster. Or does adding it to the cluster also install the software?
Thanks
View 1 Replies
View Related
Oct 23, 2014
I'm contemplating running two availability groups on a two node WSFC. The WSFC is setup with a file share witness (i.e. no shared storage). Can I safely run 1 AG on one primary node, and the other AG on the other node (as primary). Each AG would have replicas on the passive node. This would effectively allow both servers to be in use at the same time. In a failover event, I understand that both workloads would transfer to a single server - so the box needs to be sized appropriately.
View 1 Replies
View Related
Jun 11, 2015
We are in the process of building a 3 node SQL Server Cluster (Server 2012/ SQL Server 2012), and we have configured the quorum so that all 3 nodes have a vote (no file share witness as we already have an odd number of nodes).
As I understand it, this should allow the cluster to run as long as 2 of the nodes remain online.
However, the validation report states that 2 node failures would be acceptable and, when we tested this by powering off two of the nodes, the cluster did indeed continue to run on a single node.
View 4 Replies
View Related
Apr 2, 2007
Hello,
I am having a problem with SQL Server (Express) hanging during simple debugging of CLR code. I created a test project with a user defined function, and call this from the test script. The output log shows that the sqlservr.exe was auto-attached successfully, and then the everything hangs. I have to terminate debugging in order to regain control, and this takes perhaps a minute or two.
Any ideas?
View 11 Replies
View Related
Aug 21, 2007
I configure Windows 2003 R2 and SQL 2005 two nodes Cluster. When I move cluster resource from one node to anther node it takes around 30 seconds to become online. So in that time if any query is running it stops responding.
So please suggest in this regard
View 2 Replies
View Related
Oct 29, 2015
1. Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. after fail over done to 2nd secondary node what mode in production(readonly or read write).
4. how to rollback to production primary ,will change data in secondary will get updated in primary.
View 5 Replies
View Related
Mar 3, 2007
We have set up Mirroring with a witness server and everything works fine when we failover from the SQL Management console.
However, if we failover when our Maccola client is connected, the client blows up - clearly because it can no longer connect to the database.
The ODBC DSN used by the Maccola client shows a checkbox for the 'select a failover server' but the checkbox is grayed out.
Also the summary of settings for the DSN at the end of the wizard reveals that the failover to server (y/N) option is set to N.
The default setting for this DSN is 'populate the remaining values by querying the server' but it doesn't appear to be getting the settings for failover from the server or any other interactive DSN settings either. The server is clearly set for mirroring.
Another suspicious item is that the DSN cannot connect to the server with SA permissions, even though the server is set to mixed security and we use the correct authentication.
Is it possible that the client MACHINE is not authenticating with the domain or sql server properly. We are logged into the client with the domain account that is the SQL admin account on the sql server box.
We should be able to interact with the sql server settings through the ODBC DSN on the client shoulnd't we?
Are we missing a service pack on the client?
Thanks,
Kimball
View 1 Replies
View Related
Oct 29, 2015
1. In alwaysON fail over cluster, Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. After fail over done to 2nd secondary node what mode in production(readonly or read write).
4. How to rollback to production primary ,will change data in secondary will get updated in primary.
View 3 Replies
View Related
Apr 30, 2007
At stage: Visual Studio Integrated Development Environment 2005
Coping new files dv_commoner.hxs Directory....... 89818
Last lines in SQLSetup0001_ADH1_PPESku_1.log:
........
MSI (s) (40:C8) [10:32:18:640]: Executing op: ChangeMedia(MediaVolumeLabel=SQLDEV,MediaPrompt=Please insert the disk: Microsoft Visual Studio 2005 Premier Partner Edition - ENU Disk 1,MediaCabinet=1\_1519_RTL_x86_enu_VSCC_Help_Collection.cab,BytesPerTick=32768,CopierType=1,,,SignatureRequired=0,,,IsFirstPhysicalMedia=1)
MSI (s) (40:C8) [10:32:18:656]: Executing op: FileCopy(SourceName=92310|dv_commoner.hxs,SourceCabKey=commoner_hxs_8_ENU____.3643236F_FC70_11D3_A536_0090278A1BB8,DestName=dv_commoner.hxs,Attributes=16384,FileSize=89818,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,Version=8.0.50730.10000,Language=1033,InstallMode=58982400,,,,,,,)
MSI (s) (40:C8) [10:32:18:656]: File: C:Program FilesCommon FilesMicrosoft SharedDevHelpVSCCv8.0dv_commoner.hxs; To be installed; Won't patch; No existing file
MSI (s) (40:C8) [10:32:18:656]: Source for file 'commoner_hxs_8_ENU____.3643236F_FC70_11D3_A536_0090278A1BB8' is compressed
Please help with problem and how to procceed.
Thanks
ADH
View 2 Replies
View Related
May 31, 2006
I am trying to install SQL 2005 SP1 on a Windows 2000 Server SP4 platform. I have repeatedly tried this, and have trashed and re-built the platform all to no avail. I keep getting the same problem. The installation hangs, using 0 CPU apparently after successfully extracting the files to disk. It leaves the HOTFIX.EXE running, and cancelling it ends the process. The HOTFIX.LOG looks like this:
5/31/2006 10:05:03.185 ================================================================================
05/31/2006 10:05:03.185 Hotfix package launched
05/31/2006 10:05:03.195 Successfully opened registry key: SOFTWAREMicrosoftWindowsCurrentVersion
05/31/2006 10:05:03.195 Successfully read registry key: CommonFilesDir, string value = G:Program FilesCommon Files
05/31/2006 10:05:03.195 Successfully opened registry key: SOFTWAREMicrosoftWindowsCurrentVersion
05/31/2006 10:05:03.205 Successfully read registry key: ProgramFilesDir, string value = G:Program Files
I have been searching various forums for an answer and have found one hit here (but no answer):
http://www.eggheadcafe.com/aspnet_answers/SQLServersetup/May2006/post26789173.asp
After reading this I cancelled the CMD.EXE instead of the HOTFIX.EXE and duly got a "Product Enumeration" popup window. The HOTFIX.LOG now looks like this:
05/31/2006 12:27:18.057 ================================================================================
05/31/2006 12:27:18.057 Hotfix package launched
05/31/2006 12:27:18.057 Successfully opened registry key: SOFTWAREMicrosoftWindowsCurrentVersion
05/31/2006 12:27:18.057 Successfully read registry key: CommonFilesDir, string value = G:Program FilesCommon Files
05/31/2006 12:27:18.067 Successfully opened registry key: SOFTWAREMicrosoftWindowsCurrentVersion
05/31/2006 12:27:18.067 Successfully read registry key: ProgramFilesDir, string value = G:Program Files
05/31/2006 16:09:34.452 Successfully opened registry key: SOFTWAREMicrosoftWindowsCurrentVersion
05/31/2006 16:09:34.462 Successfully read registry key: CommonFilesDir, string value = G:Program FilesCommon Files
05/31/2006 16:09:34.462 Successfully opened registry key: SOFTWAREMicrosoftWindowsCurrentVersion
05/31/2006 16:09:34.462 Successfully read registry key: ProgramFilesDir, string value = G:Program Files
05/31/2006 16:09:34.462 Local Computer:
05/31/2006 16:09:34.462 Target Details: PET005-5
05/31/2006 16:09:34.462 commonfilesdir = G:Program FilesCommon Files
05/31/2006 16:09:34.462 lcidsupportdir = G:sql2005sp1_ext1033
05/31/2006 16:09:34.472 programfilesdir = G:Program Files
05/31/2006 16:09:34.472 supportdir = G:sql2005sp1_ext
05/31/2006 16:09:34.472 supportdirlocal = G:sql2005sp1_ext
05/31/2006 16:09:34.472 windir = G:WINNT
05/31/2006 16:09:34.472 winsysdir = G:WINNTsystem32
05/31/2006 16:09:34.472
05/31/2006 16:09:34.512 Enumerating applicable products for this patch
05/31/2006 16:09:34.532 Found Redist 2005 product definition
And there is also now a REDIST9_HOTFIX_KB913090.LOG file which looks like this:
05/31/2006 16:09:34.582 ================================================================================
05/31/2006 16:09:34.582 Hotfix package launched
Yes I am logged on as an Administrator. Yes the SQL 2005 is off the latest MSDN CDs.
How do I resolve this issue and install SP1?
View 8 Replies
View Related
Nov 30, 2006
for example,xml like
'<name>test</name><age>10</age>'
select ? from @xml.nodes('/*')
how to get the node tag name like name and age?
thanks
View 4 Replies
View Related
Feb 20, 2008
I've installed MSCS on two Win2k3 x64 Enterprise systems. On the first I installed SQL 2005, and all went well. All resources are online and SQL works, migrated 25 databases into the new install. Installing SQL 2005 on the second node is problematic. If I select install cluster resources, I have to define new stuff for a new group. If I don't install cluster resources, then the install is all local (nothing on the unseen shared disk resource.)
It does not see the shared disk resource during install, the Quorum is good. I can move the Cluster Group between servers with no problems. None of the SQL resources is available on the second node. Error is basically "a cluster node is not available for this operation".
The Sql Server and Sql Server Agent do not even acknowledge the existence of the second node, and it is not available as a possible owner. i can't find any specific instructions on installing the second node. The other SQL resources say the second server is an available possible owner. None of them will take ownership and run the resource.
Any help available out there?
Thanks!
Bill
View 1 Replies
View Related
Sep 24, 2007
Occasionally, when I try to edit a package I get an error. Visual studio is busy found VS hanged.
It is specific to my machine or a common problem.
View 4 Replies
View Related
Aug 10, 2007
Just purchased a new server, and am trying to install SQL Server 2005 standard, 64 bit. I'm running Windows Server 2005 r2 64 bit.
Setup support files installs fine.
System configuration passes all 14 checks.
Then it moves to install and just hangs there. Eventually, perhaps maybe after 20-30 minutes does it create a message saying that the Install has failed to respond. Retry or cancel.
View 3 Replies
View Related
May 30, 2008
hi,
How to get 2 level tree node in the sql server 2005. We have table with data.On load we populate the tree in Asp.net.
Regards,
Vinayak Panchal
View 2 Replies
View Related
Apr 9, 2007
Hi
I got an access 2002 application front end with a sql server 2005 express back end. Some of my clients are having some difficulties. After using the application for a while, some of the users are finding that the system just hangs up. It usually happens after the front end application has been running for about an hour (sometimes sooner and sometimes later). There are perhaps 1 to 5 concurrent users and I have checked to see if there are any firewalls stalling it (I think I check all of them)- Is there any way that SQL Server 2005 express could be caused to just stall- This even occurs with the odd laptop. All the appropriate protocols are enabled as well. These databses are not very large.
ANY HELP WOULD BE GREATLY APPRETIATED!!!
Thanks
Frank Srebot
View 4 Replies
View Related
