Alter Table #TempTable Problem
Aug 9, 2005
I am trying to add a column to a temp table and then immeditaely query
against that new column. If I do this in Query Analyzer it works fine
as long as there is a go in between, but I can't use a go inside a
stored proc.. How do i get SQL to finish processing the alter table
command so I can use the new column?
alter table #TempPaging add TIId int not null identity
--go --fixes the problem in QA, but not in proc
Select * From #TempPaging Where TIId > 0 AND TIId < 11
(Error TIId does not exist)
View 7 Replies
ADVERTISEMENT
Dec 11, 2007
Hi!
I have several problems of my coding, please give me some advice.
1. How to let result data place at temptable temperary for other mapping? should i create temptable first ?
2. When I got the duplicated record result, I require to map with the main tables (tblROrder & tblSOrder)to find out the record reference no. Please advice how to handle this issue with reference no. at the outcome.
Many thanks,
New Learner
***Coding as following
SELECT code, SMSNo, holderNo, count(*) From tblROrder
WHERE Day = @Day
GROUP BY code, SMSNo, SholderNo
HAVING COUNT(*) > 1<=====result will be found, but since i didn't get the RefNo at the listing, please advise how to let the outcome with RefNo
INTO #tmpOne (code, SMSNo, holderNo) <====error found
SELECT code, SMSNo, holderNo, GrossAmt, count(*) From tblSOrder
WHERE Day = @prmDay between D1 AND D14
GROUP BY code, SMSNo, holderNo, GrossAmt
HAVING COUNT(*) > 1<=====result will be found, but since i didn't get the RefNo at the listing, please advise how to let the outcome with RefNo
INTO #tmpTwo (code, SMSNo, holderNo) <====error found
View 4 Replies
View Related
Jul 23, 2005
Hi people,I?m trying to alter a integer field to a decimal(12,4) field in MSACCESS 2K.Example:table : item_nota_fiscal_forn_setor_publicofield : qtd_mercadoria integer NOT NULLALTER TABLE item_nota_fiscal_forn_setor_publicoALTER COLUMN qtd_mercadoria decimal(12,4) NOT NULLBut, It doesn't work. A sintax error rises.I need to change that field in a Visual Basic aplication, dinamically.How can I do it? How can I create a decimal(12,4) field via script in MSACCESS?Thanks,Euler Almeida--Message posted via http://www.sqlmonster.com
View 1 Replies
View Related
Jul 20, 2005
I would like to add an Identity to an existing column in a table using astored procedure then add records to the table and then remove the identityafter the records have been added or something similar.here is a rough idea of what the stored procedure should do. (I do not knowthe syntax to accomplish this can anyone help or explain this?Thanks much,CBLCREATE proc dbo.pts_ImportJobsas/* add identity to [BarCode Part#] */alter table dbo.ItemTestalter column [BarCode Part#] [int] IDENTITY(1, 1) NOT NULL/* add records from text file here *//* remove identity from BarCode Part#] */alter table dbo.ItemTestalter column [BarCode Part#] [int] NOT NULLreturnGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGOhere is the original tableCREATE TABLE [ItemTest] ([BarCode Part#] [int] NOT NULL ,[File Number] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_File Number] DEFAULT (''),[Item Number] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Item Number] DEFAULT (''),[Description] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Description] DEFAULT (''),[Room Number] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Room Number] DEFAULT (''),[Quantity] [int] NULL CONSTRAINT [DF_ItemTest_Quantity] DEFAULT (0),[Label Printed Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Label Printed Cnt]DEFAULT (0),[Rework] [bit] NULL CONSTRAINT [DF_ItemTest_Rework] DEFAULT (0),[Rework Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Rework Cnt] DEFAULT (0),[Assembly Scan Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Assembly Scan Cnt]DEFAULT (0),[BarCode Crate#] [int] NULL CONSTRAINT [DF_ItemTest_BarCode Crate#] DEFAULT(0),[Assembly Group#] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Assembly Group#] DEFAULT (''),[Assembly Name] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Assembly Name] DEFAULT (''),[Import Date] [datetime] NULL CONSTRAINT [DF_ItemTest_Import Date] DEFAULT(getdate()),CONSTRAINT [IX_ItemTest] UNIQUE NONCLUSTERED([BarCode Part#]) ON [PRIMARY]) ON [PRIMARY]GO
View 2 Replies
View Related
Oct 8, 2007
I am using sql server ce.I am changing my tables sometimes.how to use 'alter table alter column...'.for example:I have table 'customers', I delete column 'name' and add column 'age'.Now I drop Table 'customers' and create again.but I read something about 'alter table alter column...'.I use thi command but not work.I thing syntax not true,that I use..plaese help me?
my code:
Alter table customers alter column age
View 7 Replies
View Related
Sep 7, 2007
Hi guys,
If I have a temporary table called #CTE
With the columns
[Account]
[Name]
[RowID Table Level]
[RowID Data Level]
and I need to change the column type for the columns:
[RowID Table Level]
[RowID Data Level]
to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time.
What will be the right syntax using SQL SERVER 2000?
I am trying to solve the question in the link below:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1
Thanks in advance,
Aldo.
I have tried the code below, but getting syntax error...
ALTER TABLE #CTE
ALTER COLUMN
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
I have also tried:
ALTER TABLE #CTE
MODIFY
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
View 18 Replies
View Related
Nov 20, 2013
I have created a table as below mentioned. Then I want to alter the ID column as identity(1,1) without dropping the table as well as losing the data.
create table dbo.IdentityTest
(
id int not null,
descript varchar(255) null,
T_date datetime not null
)
View 7 Replies
View Related
Oct 25, 2015
we have a table in our ERP database and we copy data from this table into another "stage" table on a nightly basis. is there a way to dynamically alter the schema of the stage table when the source table's structure is changed? in other words, if a new column is added to the source table, i would like to add the column to the stage table during the nightly refresh.
View 4 Replies
View Related
May 15, 2008
How insert values from TABLE2 into @TempTable if a row into TABLE1 not in TABLE2?
--Query:
DECLARE @TempTable (IdTemp int, TempDate datetime)
INSERT INTO @TempTable (IdTemp, TempDate)
SELECT T1.Id, MAX(T2.Date2)
FROM Table1 T1 INNER JOIN Table2 T2 ON T1.Id = T2.Id
GROUP BY T1.Id
/*
Example:
TABLE1 Id = '1'
TABLE2 = Id '1' not exists
*/
View 2 Replies
View Related
Mar 27, 2008
Go
Create table #RealTable
(
LastName varchar (20)
,Phone varchar (20)
,MissingInfo varchar (100)
,ErrMessage varchar (255)
);
Insert INTO #RealTable Values('Abraham','917 250 9999', '1', 'Need More Paper')
Insert INTO #RealTable Values('Sar', '917 999 9999' '2', 'Need ID')
Insert INTO #RealTable Values('John', '732 888 8888', '3', 'Need More Paper')
Insert INTO #RealTable Values ('Sal', '555 555 5555', '4', 'Legal Documentation')
some how it is not working??? i dont know why
View 3 Replies
View Related
Jul 26, 2004
I have contract table which has built in foreign key constrains. How can I alter this table for delete/ update cascade without recreating the table so whenever studentId/ contactId is modified, the change is effected to the contract table.
Thanks
************************************************** ******
Contract table DDL is
create table contract(
contractNum int identity(1,1) primary key,
contractDate smalldatetime not null,
tuition money not null,
studentId char(4) not null foreign key references student (studentId),
contactId int not null foreign key references contact (contactId)
);
View 3 Replies
View Related
Aug 13, 2006
In SQL Server 2005,here are two tables, created by the following SQL Statements:
CREATE TABLE student(
ID CHAR(6) PRIMARY KEY,
NAME VARCHAR(10),
AGE INT
);
CREATE TABLE score(
ID CHAR(6) PRIMARY KEY,
SCORE INT,
FOREIGN KEY(ID) REFERENCES student(ID)
);
For the length of Column ID is not enough, So I want to alter its length.The alter statement is:
ALTER TABLE student ALTER COLUMN ID CHAR(20)
For the table student is referenced by table score, the alter statement can not alter the column of the table student, and the SQL Server DBMS give the errors.
But, I can manually alter the length of the column ID in SQL SERVER Management Studio. How to alter column length of the master table(student) along with the slave table(score)?
Thanks!
View 2 Replies
View Related
May 26, 2015
which ALTER TABLE/ALTER COLUMN- Statement has a Recreate Table as result ?
View 2 Replies
View Related
Jul 20, 2005
Hello!I have an MS SQL-server with an database, that runs replication. In thisdatabase there is an table with an columni want to extend; varchar(50)->varchar(60).But I get this error (using design window of Enterprise Manager): Cannotdrop the table 'MytableName' because it is being used for replication.Thanks for helpBjoern
View 1 Replies
View Related
Apr 10, 2007
A customer wants to implement table partitioning on a replicated table.
They want to hold 13 months of data in the table and roll off the earliest/oldest month to an identical archive table. The table has a date field and partitioning by month makes sense all around.
So SWITCH PARTITION is the obvious solution to this, except for the fact that the table is replicated (transactional w/no subscriber updates).
What are his architectural or practical solutions to using table partitioning and replication?
thx
View 5 Replies
View Related
Dec 10, 1998
I have a stored procedure in which I create a temporary table : ##xyz
The stored procedure runs fine, however if I try to run it again later on
I get the following message:
"Msg 2714, Level 16, State 1
There is already an object named '##xyz' in the database."
If I issue the drop table ##xyz I get the following message:
"Msg 3701, Level 11, State 1
Cannot drop the table '##xyz', because it doesn't exist in the system catalogs
Help!
Thanks in advance...Marisa
View 1 Replies
View Related
May 17, 2007
Is there a way in T-SQL to check to see if a #tempTable exists? I want to write a proc the uses a temp table, but I first need to see if the table already exists. if it does I want to drop it, otherwise skip
View 23 Replies
View Related
Jan 16, 2008
Hi,
A stored procedure mySlowProc performs a complicate SELECT. It creates 10 temporary tables either by SELECT ... INTO #Table1 or by doing CREATE TABLE #Table2 and then INSERT #Table2. Beside the fact this SP is known to be slow and could be better written. However, for educational purpose, can you please shed some lights:
Question 1: Could the use of many #TempTable(s) lead directly or indirectly to a blocking situation where another user cannot perform a write (UPD, DEL, INS) on the table (or tables) which are SELECTed by the mySlowProc SP?
Question 2: What are the consequences of abusing #TempTable if mySlowProc is called concurrently by 100 different users? In particular, is there any locking mechanism that would prevent the mySlowProc SP from being executed concurrently.
Thanks very much in advance for any help.
View 5 Replies
View Related
Jan 26, 2000
I have a stored procedure which creates 3 temporary tables. Every table is about ten rows and 25 columns. The inserts in the tables goes fast (< 30 ms). The selects from them is also that fast. BUT the first select takes about 3200 ms one each of the temptables. (I first do insert, then select from them.) So the SP executes at about 13 seconds instead of 3.
Any suggestions, anyone, please?
View 1 Replies
View Related
Mar 9, 2001
Hi,
Obviously, in a select statement, I can select * into #temptable. But can I do the equivalent from a stored procedure? I do not want to edit the stored procedure, just take the records it returns and put them into the temporary table. I do not know what records are returned by the stroped procedure until it is executed. Is there a way I can do this?
Thanks
J
View 1 Replies
View Related
Apr 22, 2008
Hi,
If any one could suggest if Is it possible to make a JOIN of two different select statements.
SELECT PartNumber,SUM(Value) FROM dbo.List_Parts where PartNumber like '%TX'
To be Joined with
SELECT PartNumber,COUNT(PartNumber) FROM dbo.List_Orders where Part Number like '%TX'
The result should be:
PartNumber , SUM(Value),COUNT(PartNumber)
View 5 Replies
View Related
Mar 11, 2008
Code:
exec('select RIGHT(00000 + CAST(dh.zipcode AS varchar(5)), 5) as zip, '+@fieldname +' as distance into #distance from sumplicity.dbo.t_distancetohospital dh')
This runs normally and returns the number of rows created. Yet when I do a 'select * from #distance' query, I get a message that #distance doesn't exist.
Where is it storing all of this and how do I access it?
View 1 Replies
View Related
Jun 6, 2002
Hi group,
I don't know what I should try next, all of my tries have been without results in this case. I just wanted to create a temporary table, then insert one row into it and then use this row to compare if this row exists in another table or not. This is my script:
------------------------
CREATE PROCEDURE imp_Tippimport (@TGName char(33)) AS
BEGIN
CREATE TABLE #tTippgeber (
TGName2 char(33)
)
INSERT INTO #tTippgeber (TGName2)
VALUES (@TGName)
*** see below ***
IF NOT exists (select TGName FROM Tippgeber WHERE TGName = @TGName)
INSERT INTO Tippgeber SELECT TGName2 FROM #tTippgeber
/* SELECT * INTO Tippgeber FROM #tTippgeber */
ELSE
UPDATE Tippgeber SET
TGName = t.TGName2
FROM #tTippgeber AS t, Tippgeber
WHERE TGName = t.TGName2
END
GO
I also created a cursor and used a fetch in to a veriable in the line with the stars to see the value of TGName2 but it was NULL.
Any ideas ?!
Thanks for any help !!
Sascha
View 1 Replies
View Related
Feb 15, 2006
Is there a way to add a column to an existing table and do it all in C#If my query string is as follows how do I execute the query?ALTER TABLE interests ADD COLUMN Swim VARCHAR(1) NOT NULL DEFAULT('n')ThanksMoonWa
View 2 Replies
View Related
Aug 13, 2002
I think I have blown a gasket..... a elementary simple sp that will not work but I am unable to find an explanation as to why..... please help.
CREATE PROCEDUREbrsp_table_alteration
@var_1 varchar(45)
,@var_2varchar(45)
,@var_3varchar(30)
AS
ALTER TABLE @var_1
ADD@var_2@var_3NULL
Thanks.
View 3 Replies
View Related
Sep 30, 2003
I have a table tblABC which exists in 800 databases. I want to run a cursor to turn off the pk field ID indentity permannetly and then to "insert tblABC select * from tblXYZ".
I have tried the "set indentity_insert tblABC on" statement and failed on insert tblABC select * from tblXYZ.
Is there any alter table related t-sql could permannetly turn off the identity?
thanks
David
View 7 Replies
View Related
Jun 7, 2001
Is there anyway to Insert a new column between two existing columns without creating a new table?
Thanks
View 3 Replies
View Related
Oct 17, 2001
Hi,
is it possible to override the system when adjusting
columns. i.e. a system override setting.
For instance if I've got a column that is indexed and I
want to adjust it from varchar(50) to varchar(51) it lets
me. But if I then try and adjust the column to varchar
(49) I get the error below:
Server: Msg 5074, Level 16, State 8, Line 1
The index 'LastName' is dependent on column 'lastname'.
Server: Msg 4922, Level 16, State 1, Line 1
ALTER TABLE ALTER COLUMN lastname failed because one or
more objects access this column.
I asked this question on another Forum and was told I had to drop the index first. Just thought I'd ask for a second opinion.
Thanks for the help.
Steve
View 1 Replies
View Related
Jan 30, 2004
Hi to all!
I have a silly problem, but I'm not able to solve it!
I know how to add a field in a table via Enterprise manager and I know also via ALTER TABLE command.
...But the problem is: I want to add a field NOT in the last position, but on the middle (for istance)
So, this is possible via Enterprise Manager but with the ALTER TABLE command? How can I add a field without put it in the last position?
...Thanks a lot!
Sergio
p.s.: Sorry for my poor english..I hope you understand my question!
View 2 Replies
View Related
Jun 5, 2008
hello,
i am trying to add a column to every table in a database, if it (doesn't already exist), with the following code:
declare @name varchar(50)
declare c cursor for select name from sys.tables
open c
fetch next from c into @name
while @@FETCH_STATUS = 0
begin
if( (select count(*) from sys.columns
WHERE object_id IN (SELECT object_id FROM sys.tables WHERE name = @name )
and name='ins_id') = 0 )
begin
alter table @name add ins_id int
end
fetch next from c into @name
end
close c
deallocate c
and when i run the script i get the error message
Incorrect syntax near '@name'.
reffering to the alter table statement
So, my question is, how can i actually perform the alter table in this case?
thank you
View 3 Replies
View Related
Mar 2, 2007
Pramod writes "I want to change the primary key field of my database to Identity seed. the table is with data. data should be secured
this is the structure
'=================================
CREATE TABLE [tblStock] (
[StockId] [numeric](18, 0) NOT NULL ,
[ItemID] [numeric](18, 0) NULL ,
[Batch] [varchar] (50) NULL ,
[Qty] [float] NULL ,
[Prate] [float] NULL ,
[SRate] [float] NULL ,
[Mrp] [float] NULL ,
[PTR] [float] NULL ,
[batchid] [numeric](18, 0) NULL ,
[BatchCode] [varchar] (50) NULL ,
CONSTRAINT [PK_tblStock] PRIMARY KEY NONCLUSTERED
(
[StockId]
) ON [PRIMARY] ,
CONSTRAINT [IX_tblStock] UNIQUE NONCLUSTERED
(
[ItemID],
[Batch],
[Prate]
) ON [PRIMARY]
) ON [PRIMARY]
===================================
How do i use alter table with identity seed
ALTER TABLE tblStock alter column StockID Numeric IDENTITY (1, 1)
how the p[rimary key affects
Please help me"
View 1 Replies
View Related
Sep 13, 2007
How to alter a table name by using Query Analyser
i tried like this..
ALTER TABLE of_info_grp
RENAME TO stp_info_grp_map
It is giving an error like this
Server: Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'TO'.
Some one help on this
View 2 Replies
View Related
Jul 23, 2005
Hi,I'm trying to write a function check if a column exists on a table, andcreates it if it doesn't. The line that the query analyzer is citingis noted. It seems unhappy taking variables in the ALTER TABLEcommand. I can think of a hack around this, but I'm hoping there's abetter way? Muchas gracias in advance :)-DJCode followsCREATE FUNCTION fieldCreator(@TableName varchar(20),@FieldName varchar(20))RETURNS BITASBEGINif (EXISTS (SELECT count (objname)FROM ::fn_listextendedproperty (NULL, 'user', 'dbo', 'table',@TableName, 'column', @FieldName)GROUP BY objname))BEGINALTER TABLE @TableName ADD @FieldName int DEFAULT 4 --ERRORS HERE!!!EXEC sp_addextendedproperty 'caption', 'Created by script foranalysis', 'user', dbo, 'table', @TableName, 'column', @FieldNamereturn 1ENDreturn 0ENDGO
View 8 Replies
View Related