in the database, there is some information about the applicant: his name, his email, his status (accepted or rejected)....etc.
the page that is shown to the administrator displays the applicant name and his status, when he changes any of the applicants status, an email is sent to that applicant.
is there any way to do that?
thanks in advance
I want to setup a method to get emailed whenever someone adds an item to a particular table.
I'm looking at SP's, and DTS's.. but i'm just not sure what the best path is.
http://www.sqldev.net/dts/SMTPTask.htm will create a great Custom DTS Email Task.. but then i don't know what to do next... I don't know how to say.. "If a new row is added, then run this DTS"... or if i should schedule the DTS to run every 30 minutes and then somehow query for new "Created" dates.
Please Help!
Hi guys,
I am new to reporting services. I want to know how to send email whenever there is an update on TABLE_Customer. I have looked through data-driven subscription, but that is just normal schedulling. When i surf the net, i also found UpdateReportExecutionSnapshot. can i just put UpdateReportExecutionSnapshot inside my application so that when on UPDATE function, i will call UpdateReportExecutionSnapshot to trigger the snapshot to be updated?
Help... Thank you very much
Hello ALL
what I want to achieve is to load a text file that has email addreses from disk and using the email addresses in the text file look it up against the email addresses in the database table then once matched delete all the users in the table whose email address were in the text file.
I also want to update some users using a different text file.
Please help me with the best way to do this
Thanks in advance
Hi guys, may I know is it possible to create an update trigger like this ? Assuming there are two database, database A and database B and both are having same tables called 'Payments' table. I would like to update the Payments records on database A automatically after Payments records on database B had been updated. I can't use replication because both tables might having different records and some records are the same. Hope can get any assistance here, thank you.
Best Regards,
Hans
I am trying to insert data to a simple table using SQL express
However , I can see the data saved in the DataSet but not in the actual database.
If I try to insert the same user again , I got primary key violation ???
Here is the insert function :
string SqlConnection = @"Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|QJ.mdf;Integrated Security=True;User Instance=True";
SqlConnection Conn = new SqlConnection(SqlConnection);
SqlDataAdapter DataAdapter = new SqlDataAdapter("SELECT * FROM USERS", Conn);
SqlCommandBuilder ComandBuilder = new SqlCommandBuilder(DataAdapter);
DataAdapter.InsertCommand = ComandBuilder.GetInsertCommand();
DataAdapter.UpdateCommand = ComandBuilder.GetUpdateCommand();
DataSet DS = new DataSet();
DataAdapter.Fill(DS, "USERS");
DataTable DT = DS.Tables["USERS"];
DataRow DR = DT.NewRow();
DR["NAME"] = txtUserName.Text;
DR["Password"] = txtPass.Text;
DR["Type"] = 1;
DT.Rows.Add(DR);
DataAdapter.Update(DS,"USERS");
DS.AcceptChanges();
Conn.Close();
I dont know what I have done wrong
Please help
Thanks very much
Till yesterday every thing was fine....after i installed visual studio...god knws wat happnd dat it was not working, i did everything again but noe using my asp.net forms i am unable to write/edit/update the database, though i can view the same.....can any one suggest was might b d problem.
(i have set permissions for IUSER bot Read and Write)
Dear All,
I am making web application using Asp.net C#(Visual Studio2005). And Sql server 2000 as a back End.
Actually I am fetching data from other database(named as retailexcel but in same server). I have wriiten a view (in retailexcel database) to get required data from four table of other database. My problem is when I fetch those data(about 40000 to 50000 record) It taking to much time. I tried catch feature of asp.net2.0. Time reduced but not significantly. So I am trying to import those tables to my database (named Inventory) from that retailexcel.
Now problem is every day or two, record of those tables changes. How can I keep update my tables (which are importing from retailexcel)
Please suggest me some idea.
Thanks
I am trying to manage a sql server.
In this sql server, I have about 200 databases.
Is there any way/suggestions to check to see if some of the database has not been accessed/updated for the last month or longer?
I am trying to develop a system to remove the database that's no longer needed.
Thank you.
Hello
I am developing a windows forms app in Visual C# Express edition, it has a database, and when I am debugging, nothing is being done in the database, and I am sure it is nothing to do with the code. Because all I am doing is creating a database with one table, and just dragging the table (with the datagridview) onto a form, then it runs perfectly, but when I add or delete records, and exit the program, it is not reflected on my DB (which is a SQL Server express DB by the way),
I was looking everywhere, and all I could find was to change the "copy to output directory" propierty of the DB to "copy if newer" but still it doesn't work,
Any ideas why this may be happening??
thanks a lot
Andrés
Hi,
I am trying to create a data dictionary for a huge application which has aroung 300 tables in the database....when i perform any operation in the application some tables are updated.... can you help me to find out how can we find out the last updated tables in the database ??
Hi,
I have very little, to zero, IT configuration knowledge and I am hoping that someone is able to help me out.
I am currently writing the SQL scripts and developing the reports in the SQL Server Business Intelligence Development Studio, and then deploying the reports to the server for managers to eventually view.
Recently the IT section updated the test database (temp) that is connected to SQL Server 2005, with the live database (production), so that the data and database structure were up to date for me to create the reports.
When the update was done, the connection to SQL Server failed, and the newly appointed IT person responsible for SQL does not know how to resolve the problem. Up until yesterday I was getting a message that said that the connection has failed and then today I have the following message (she has been trying very hard to get it working):
An error occurred during local report processing.
An error has occurred during report processing.
Query execution failed for dataset 'Division'.
The SELECT permission was denied on the object 'Dim1', database 'payglobal', schema 'dbo'.
The reports that were deployed to the server prior to the update are still accessible however I am unable to review any reports I edit within the Development Studio. It has been out of action now for nearly two weeks.
Could someone please give me very detailed instructions on where the IT person should look, and what she should do to fix the problem. I will then pass these onto her.
Thanks.
I been asked recently in the interview thatHow can I detect changes automatically in the SQL Server Database when anything is updated, deleted or inserted?if anyone can help me in this that will be really great.
I dont actually know whether I can ask this here but I wanted to know the answer for this and thought this might be right place to ask?
sorry if I am wrong?
Thanks in Advance
Hello Everyone,
I am new to connecting to databases through java and in fact have not done much database programming although I am fairly good at SQL.
I have used the MS JDBC driver to connect to a MS SQL server database but I want to update my application every time a record is added to the database and or alert the user.
From what I have read, i assume that I can create a Trigger in java but how do I get my trigger to call a method / run java code?
Thanks for your time and Help
Martin.
Hi,I want to save the last modification date when the row is updated. I have a column called "LastModification" in the table, every time the row is update I want to set the value of this column to the current date. So far all I know is that I need to use a trigger and the GetDate() function, but could any body help me with how to set the value of the column to getdate()? thanks for your help.
View 3 Replies View Related Stepping thru the code with the debugger shows the dataset rows being deleted.
After executing the code, and getting to the page presentation. Then I stop the debug and start the
page creation process again ( Page_Load ). The database still has the original deleted dataset rows.
Adding rows works, then updating works fine, but deleting rows, does not seem to work.
The dataset is configured to send the DataSet updates to the database. Use the standard wizard to create the dataSet.
cDependChildTA.Fill(cDependChildDs._ClientDependentChild, UserId); rowCountDb = cDependChildDs._ClientDependentChild.Count; for (row = 0; row < rowCountDb; row++) { dr_dependentChild = cDependChildDs._ClientDependentChild.Rows[0]; dr_dependentChild.Delete(); //cDependChildDs._ClientDependentChild.Rows.RemoveAt(0); //cDependChildDs._ClientDependentChild.Rows.Remove(0); /* update the Client Process Table Adapter*/ // cDependChildTA.Update(cDependChildDs._ClientDependentChild); // cDependChildTA.Update(cDependChildDs._ClientDependentChild); }
/* zero rows in the DataSet at this point */ /* update the Child Table Adapter */ cDependChildTA.Update(cDependChildDs._ClientDependentChild);
Hi,
I am using web service to synchronize data between SQL Server 2005 on a desktop and a SQL Server Mobile Edition on a mobile device.
Initially, when i added the data source to my mobile application, my .sdf only has 3 records. I am then supposed to retrieve 97 more records from the desktop server when my mobile application runs. After performing merging, I clicked (on my device emulator) on the .sdf deployed under my mobile application and the query analyzer showed all 100 records.
Does this mean my mobile database has been successfully updated with all 100 records? If not, how do I check that? The reason why I am asking this is that the file size of this .sdf with 100 records is still the same as the initial .sdf with only 3 records. How is this possible?
Am I missing anything or getting some concepts wrong? Please enlighten. Thanks.
SQL 2000 to SQL 2005 Upgrade Error - Database Down - Help Appreciated
I am upgrading a SQL 2000 standard database server to SQL 2005 standard on a windows 2003 server
I am logged in as domain admin and started the upgrade as 'sa'
The upgrade stops with the error:
Service MSSQLSERVICE can not be started. Verify you have sufficient privilages to start system services. The error code is (17185)
The error log shows:
2007-01-04 15:59:38.77 Server Authentication mode is MIXED.
2007-01-04 15:59:38.79 Server Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Oct 14 2005 00:33:37
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-01-04 15:59:38.79 Server (c) 2005 Microsoft Corporation.
2007-01-04 15:59:38.79 Server All rights reserved.
2007-01-04 15:59:38.79 Server Server process ID is 4188.
2007-01-04 15:59:38.79 Server Logging SQL Server messages in file 'F:SQLDataMSSQLlogERRORLOG'.
2007-01-04 15:59:38.79 Server This instance of SQL Server last reported using a process ID of 2980 at 1/4/2007 3:56:58 PM (local) 1/4/2007 2:56:58 AM (UTC). This is an informational message only; no user action is required.
2007-01-04 15:59:38.79 Server Registry startup parameters:
2007-01-04 15:59:38.79 Server -d F:SQLDataMSSQLdatamaster.mdf
2007-01-04 15:59:38.79 Server -e F:SQLDataMSSQLlogERRORLOG
2007-01-04 15:59:38.79 Server -l F:SQLDataMSSQLdatamastlog.ldf
2007-01-04 15:59:38.79 Server Command Line Startup Parameters:
2007-01-04 15:59:38.79 Server -s MSSQLSERVER
2007-01-04 15:59:38.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-01-04 15:59:38.79 Server Detected 4 CPUs. This is an informational message; no user action is required.
2007-01-04 15:59:38.83 Server Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.
2007-01-04 15:59:39.02 Server Using the static lock allocation specified in the locks configuration option. Allocated 20000 Lock blocks and 20000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-01-04 15:59:39.02 Server Multinode configuration: node 0: CPU mask: 0x0000000a Active CPU mask: 0x0000000a. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2007-01-04 15:59:39.04 Server Multinode configuration: node 1: CPU mask: 0x00000005 Active CPU mask: 0x00000005. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2007-01-04 15:59:39.04 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-01-04 15:59:41.04 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-01-04 15:59:41.04 Server Database Mirroring Transport is disabled in the endpoint configuration.
2007-01-04 15:59:41.04 spid7s Starting up database 'master'.
2007-01-04 15:59:41.05 spid7s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2007-01-04 15:59:41.07 spid7s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2007-01-04 15:59:41.07 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-01-04 15:59:41.08 spid7s SQL Trace ID 1 was started by login "sa".
2007-01-04 15:59:41.08 spid7s Starting up database 'mssqlsystemresource'.
2007-01-04 15:59:41.11 spid7s Using 'dbghelp.dll' version '4.0.5'
2007-01-04 15:59:41.11 spid7s ***Stack Dump being sent to F:SQLDataMSSQLLOGSQLDump0035.txt
2007-01-04 15:59:41.11 spid7s SqlDumpExceptionHandler: Process 7 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
2007-01-04 15:59:41.11 spid7s * *******************************************************************************
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s * BEGIN STACK DUMP:
2007-01-04 15:59:41.11 spid7s * 01/04/07 15:59:41 spid 7
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s * Exception Address = 78144D3A Module(MSVCR80+00014D3A)
2007-01-04 15:59:41.11 spid7s * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
2007-01-04 15:59:41.11 spid7s * Access Violation occurred reading address 0000001E
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s * MODULE BASE END SIZE
2007-01-04 15:59:41.11 spid7s * sqlservr 01000000 02BA7FFF 01ba8000
2007-01-04 15:59:41.11 spid7s * ntdll 7C800000 7C8BFFFF 000c0000
2007-01-04 15:59:41.11 spid7s * kernel32 77E40000 77F41FFF 00102000
2007-01-04 15:59:41.11 spid7s * MSVCR80 78130000 781CAFFF 0009b000
2007-01-04 15:59:41.11 spid7s * msvcrt 77BA0000 77BF9FFF 0005a000
2007-01-04 15:59:41.11 spid7s * MSVCP80 7C420000 7C4A6FFF 00087000
2007-01-04 15:59:41.11 spid7s * ADVAPI32 77F50000 77FEBFFF 0009c000
2007-01-04 15:59:41.11 spid7s * RPCRT4 77C50000 77CEEFFF 0009f000
2007-01-04 15:59:41.11 spid7s * USER32 77380000 77411FFF 00092000
2007-01-04 15:59:41.11 spid7s * GDI32 77C00000 77C47FFF 00048000
2007-01-04 15:59:41.11 spid7s * CRYPT32 761B0000 76242FFF 00093000
2007-01-04 15:59:41.11 spid7s * MSASN1 76190000 761A1FFF 00012000
2007-01-04 15:59:41.11 spid7s * Secur32 76F50000 76F62FFF 00013000
2007-01-04 15:59:41.11 spid7s * MSWSOCK 71B20000 71B60FFF 00041000
2007-01-04 15:59:41.11 spid7s * WS2_32 71C00000 71C16FFF 00017000
2007-01-04 15:59:41.11 spid7s * WS2HELP 71BF0000 71BF7FFF 00008000
2007-01-04 15:59:41.11 spid7s * USERENV 76920000 769E3FFF 000c4000
2007-01-04 15:59:41.11 spid7s * opends60 333E0000 333E6FFF 00007000
2007-01-04 15:59:41.11 spid7s * NETAPI32 71C40000 71C97FFF 00058000
2007-01-04 15:59:41.11 spid7s * SHELL32 7C8D0000 7D0D2FFF 00803000
2007-01-04 15:59:41.11 spid7s * SHLWAPI 77DA0000 77DF1FFF 00052000
2007-01-04 15:59:41.11 spid7s * comctl32 77420000 77522FFF 00103000
2007-01-04 15:59:41.11 spid7s * psapi 76B70000 76B7AFFF 0000b000
2007-01-04 15:59:41.11 spid7s * instapi 48060000 48069FFF 0000a000
2007-01-04 15:59:41.11 spid7s * sqlevn70 4F610000 4F7A0FFF 00191000
2007-01-04 15:59:41.11 spid7s * SQLOS 344D0000 344D4FFF 00005000
2007-01-04 15:59:41.11 spid7s * rsaenh 68000000 6802EFFF 0002f000
2007-01-04 15:59:41.11 spid7s * AUTHZ 76C40000 76C53FFF 00014000
2007-01-04 15:59:41.11 spid7s * MSCOREE 61FB0000 61FF4FFF 00045000
2007-01-04 15:59:41.11 spid7s * ole32 77670000 777A3FFF 00134000
2007-01-04 15:59:41.11 spid7s * msv1_0 76C90000 76CB6FFF 00027000
2007-01-04 15:59:41.11 spid7s * iphlpapi 76CF0000 76D09FFF 0001a000
2007-01-04 15:59:41.11 spid7s * kerberos 62220000 62277FFF 00058000
2007-01-04 15:59:41.11 spid7s * cryptdll 766E0000 766EBFFF 0000c000
2007-01-04 15:59:41.11 spid7s * schannel 76750000 76776FFF 00027000
2007-01-04 15:59:41.11 spid7s * COMRES 77010000 770D5FFF 000c6000
2007-01-04 15:59:41.11 spid7s * XOLEHLP 622E0000 622E5FFF 00006000
2007-01-04 15:59:41.11 spid7s * MSDTCPRX 622F0000 62367FFF 00078000
2007-01-04 15:59:41.11 spid7s * msvcp60 780C0000 78120FFF 00061000
2007-01-04 15:59:41.11 spid7s * MTXCLU 62370000 62388FFF 00019000
2007-01-04 15:59:41.11 spid7s * VERSION 77B90000 77B97FFF 00008000
2007-01-04 15:59:41.11 spid7s * WSOCK32 71BB0000 71BB8FFF 00009000
2007-01-04 15:59:41.11 spid7s * OLEAUT32 77D00000 77D8BFFF 0008c000
2007-01-04 15:59:41.11 spid7s * CLUSAPI 62390000 623A1FFF 00012000
2007-01-04 15:59:41.11 spid7s * RESUTILS 623B0000 623C2FFF 00013000
2007-01-04 15:59:41.11 spid7s * DNSAPI 76ED0000 76EF8FFF 00029000
2007-01-04 15:59:41.11 spid7s * winrnr 76F70000 76F76FFF 00007000
2007-01-04 15:59:41.11 spid7s * WLDAP32 76F10000 76F3DFFF 0002e000
2007-01-04 15:59:41.11 spid7s * rasadhlp 76F80000 76F84FFF 00005000
2007-01-04 15:59:41.11 spid7s * security 62800000 62803FFF 00004000
2007-01-04 15:59:41.11 spid7s * dbghelp 671B0000 672C7FFF 00118000
2007-01-04 15:59:41.11 spid7s *
2007-01-04 15:59:41.11 spid7s * Edi: 62FA0040: 62FA0028 671AFFF0 00000000 00000000 00000000 00000000
2007-01-04 15:59:41.11 spid7s * Esi: 0000001E:
2007-01-04 15:59:41.11 spid7s * Eax: 0416C05E: C0400096 C0400416 00000416 000062FA 00000000 00000000
2007-01-04 15:59:41.11 spid7s * Ebx: 0416C040: 0105F270 00002000 00000005 00000000 3368C1E0 00000000
2007-01-04 15:59:41.11 spid7s * Ecx: 0105B010: 458B0046 01F88348 00D3850F 458B0000 89C23B50 0F342444
2007-01-04 15:59:41.11 spid7s * Edx: 00000000:
2007-01-04 15:59:41.11 spid7s * Eip: 78144D3A: 24FFA5F3 144E5495 C78B9078 000003BA 04E98300 E0830C72
2007-01-04 15:59:41.11 spid7s * Ebp: 33D6E770: 33D6E790 01C65B97 62FA0040 0000001E 0416C040 0416C6DC
2007-01-04 15:59:41.11 spid7s * SegCs: 0000001B:
2007-01-04 15:59:41.11 spid7s * EFlags: 00010212: 0020006D 00690046 0065006C 005C0073 006F0043 006D006D
2007-01-04 15:59:41.11 spid7s * Esp: 33D6E768: 62FA0040 33D6E7A4 33D6E790 01C65B97 62FA0040 0000001E
2007-01-04 15:59:41.11 spid7s * SegSs: 00000023:
2007-01-04 15:59:41.11 spid7s * *******************************************************************************
2007-01-04 15:59:41.11 spid7s * -------------------------------------------------------------------------------
2007-01-04 15:59:41.11 spid7s * Short Stack Dump
2007-01-04 15:59:41.13 spid7s 78144D3A Module(MSVCR80+00014D3A)
2007-01-04 15:59:41.13 spid7s 01C65B97 Module(sqlservr+00C65B97)
2007-01-04 15:59:41.13 spid7s 01CA43B5 Module(sqlservr+00CA43B5)
2007-01-04 15:59:41.13 spid7s 01CA452E Module(sqlservr+00CA452E)
2007-01-04 15:59:41.13 spid7s 0217D3BD Module(sqlservr+0117D3BD)
2007-01-04 15:59:41.13 spid7s 0217B896 Module(sqlservr+0117B896)
2007-01-04 15:59:41.13 spid7s 0100889F Module(sqlservr+0000889F)
2007-01-04 15:59:41.13 spid7s 010089C5 Module(sqlservr+000089C5)
2007-01-04 15:59:41.13 spid7s 010086E7 Module(sqlservr+000086E7)
2007-01-04 15:59:41.13 spid7s 010D764A Module(sqlservr+000D764A)
2007-01-04 15:59:41.13 spid7s 010D7B71 Module(sqlservr+000D7B71)
2007-01-04 15:59:41.13 spid7s 010D746E Module(sqlservr+000D746E)
2007-01-04 15:59:41.13 spid7s 010D83F0 Module(sqlservr+000D83F0)
2007-01-04 15:59:41.13 spid7s 781329AA Module(MSVCR80+000029AA)
2007-01-04 15:59:41.13 spid7s 78132A36 Module(MSVCR80+00002A36)
2007-01-04 15:59:41.13 spid7s Stack Signature for the dump is 0x2BEDE9E0
2007-01-04 15:59:41.27 spid7s External dump process return code 0x20000001.
External dump process returned no errors.
2007-01-04 15:59:41.27 spid7s Error: 17185, Severity: 16, State: 1.
2007-01-04 15:59:41.27 spid7s Unable to update password policy.
2007-01-04 15:59:41.27 spid7s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Any clues?
Cheers
Paul
We installed SP1 for SQL Server 2014 this past weekend and got this error message in the logs. I found that if you set the db to read-write, it updates the system objects, even after SP1 has completed. Then you can set it back to read-only. I'm just posting this so other people can find it on the internet, as I wasn't able to find it specifically.
Error Log Entry:System objects could not be updated in database 'x' because it is read-only.
Problem: After installing SP1 for SQL Server 2014 you will find this message in the error logs saying read-only databases could not be updated.
Solution: Simply set the db to read-write and the system objects will get updated, long after SP1 was installed.
ALTER DATABASE [x] SET READ_WRITE WITH NO_WAIT
Then set it back to read-only:
ALTER DATABASE [x] SET READ_ONLY WITH NO_WAIT
You should then see these log entries:
System objects could not be updated in database 'x' because it is read-only.
Setting database option READ_WRITE to ON for database 'x'.
Starting up database 'x'.
CHECKDB for database 'x' finished without errors on 2015-07-25 01:02:28.143 (local time). This is an informational message only; no user action is required.
Synchronize Database 'x' (129) with Resource Database.
Setting database option READ_ONLY to ON for database 'x'.
Starting up database 'x'.
CHECKDB for database 'x' finished without errors on 2015-07-25 01:02:29.888 (local time). This is an informational message only; no user action is required.
Can I send an email that will update a database table? say someone replies 'yes' to the email, where would I start to place that yes answer into the database table?
Thank-you,
Eric
Hi everyone,
I'm having problems sending my query results as a csv file. Ideally I would be able to send my results from a sql job every night as a csv but I'm having problems doing it. My code is shown below
Code Block
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'admin'
,@recipients = m@m.com
,@subject = 'Notification Created Today'
,@attach_query_result_as_file = 1
,@body_format = 'text'
,@query ='
select
a1.c#, cli, fe, type, dateReq, p, (select convert(varchar(50),convert(money,amount),1)), (select convert(varchar(50),convert(money,vat),1)),(select convert(varchar(50),convert(money,total),1)), cReq
from Disb_1 a1 inner join Details on a1.c#=Details.c#
where datediff(day,getdate(),dateReq)=0 and dateReq <= getdate()'
I've tried many different things and been through the parameters of sp_send_dbmail but I just cant find anything.
Also, how can I use column names for those money conversions? At the moment it just says 'no column name'
Thanks,
Steve
I have a report that gets sends out through a subscription and sometimes the report has multiple pages and all those pages appear within one email.Is it possible to set the subscription in such a way that an email is sent per page when the subscription executes.
View 2 Replies View RelatedUnder IIS SMTP I can set bounced email redirect etc. how to do that with dbmail, the idea is I can get the list of bounced emails somewhere so I can create a report.
Any idea?
thanks
Hi all
I have heared that there is way to use SQL SMO (SQL Management Objects), or other third party tools running on a management server to send out an email or some kind of notifications if a database is locked.
Anyone knows how to do that in SQL Managment 2005.
Thanks
-Sarah
I have a website that I want to put a contact form on so I can allow users to send emails from it. I have SQL Server as my db but my hosting co. won't allow me to use the Database Mail procedure to send emails (msdb.dbo.sp_send_dbmail I think it's called).
I will have to write my own procedure to do it instead. Can anyone point me in the direction of some good resources where I might get some info on how to do this?
Hello to all out there
I want to design a database for an Email system.
Two options are coming to my mind
1) Whether I will go with a separate table for each user which will contain in each field information like MSGid, recipient, sender, subject, message.
2) or I will maintain the information in a single table for each user.
I am not able to comprehend the pros and cons of each solution above.
Please help.
I am havig trouble getting database mail to work. I setup IIS on the same box as sql. I setup SMTP with the relay to 127.0.0.0. In sql server, I setup database mail to point to localhost, with no authentication. After the setup, when I test the email (RMB Send test message) it works fine.
I created a job that will fail every time. I setup myself as the notify party on the job. When I run the job, it fails. I get no email. The job log has the following error:
Message
The job failed. The Job was invoked by User xxxxAdministrator. The last step to run was step 1 (test 1). NOTE: Failed to notify 'Dan Jones' via email.
I have spent lots of hours trying to make this simple thing work. What is wrong?
need help
split list of email add comma for evry email
i have tabe "tblLogin" and in this table i have field emall
like this
emall
-----------------------------------------
aaa@hhhh.mm
nnn@hhhh.mm
mmm@hhhh.mm
need to do ilke this
Code Snippet
@list_email = (SELECT emall FROM tblLogin)
--------------------------i get this
-----------------------@list_email=aaa@hhhh.mm ; nnn@hhhh.mm ; mmm@hhhh.mm
@recipients = @list_email
Code Snippet
IF EXISTS( SELECT * FROM [db_all].[dbo].[taliB] )
BEGIN
DECLARE @xml NVARCHAR(MAX)DECLARE @body NVARCHAR(MAX)
SET @xml =CAST(( SELECT
FirstName AS 'td','',
LastName AS 'td','' ,
Date_born AS 'td','' ,
Age AS 'td','' ,
BirthdayToday AS 'td','' ,
BirthdayThisWeek AS 'td'
FROM [Bakra_all].[dbo].[taliB] ORDER BY LastName FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))
SET @body ='<html><H1 align=center>aaaaaaaaaaaaaaaaaaaaaa</H1><body ><table border = 1 align=center dir=rtl>
<tr>
<td>name</td>
<td>fname</td>
<td>date</td>
<td>age</td>
<td>aaaaaaaaa</td>
<td>bbbbbbbbbbbbbbb</td>
</tr>'
SET @body = @body + @xml +'</table></body></html>'
EXEC msdb.dbo.sp_send_dbmail
@recipients =N'rrr@iec.co.il',
@copy_recipients='rrrrr@iec.co.il',
@body = @body,
@body_format ='HTML',
@subject ='ggggggggggggggggggggg',
@profile_name ='ilan'
END
ELSE
print 'no email today'
We have a ASP.Net 2.0 web application and need to send out emails. We have an EmailQueue table in our database where email gets stored before it is send out. We are looking at the pros and cons of using Database Mail in SQL Server 2005 to send out our emails. Should we use SQL or our web app to send email???Tips, tricks, articles, experiences, opinions are greatly appreciated. Newbie
View 2 Replies View RelatedFrom SQL Management Studion I go to Management > Database Mail and I am trying to send a test email but I never receive anything. I checked my SMTP Mail Server Logs and I saw no entry of my test email.
I also I checked my SQL Database Mail Logs and everything seems fine, no errors are reported.
The msdb.dbo.sysmail_allitems shows my email status as "sent".
So what am I missing? What steps would you recommend for troubleshooting my problem?
Thank you,
Ric
i ve a filed named "Email" of datatype .i ve created this field to insert email address in this field.but when i insert an email address like "bilal@yahoo.com" from a textbox wh is in an ASP.net webpage then in the filed i see this "System.Web.UI.WebControls.TextBox".
can u plz tell me how to fix this
Regards
Ahmed Bilal Jan
i've got a brand new server and just installed SQL 2005.
when i try to send a test email, i get the following error message:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 5 (2006-11-23T11:49:34). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it). )
I have checked all items from troubleshoot and eveything is ok...any help ?
thanks
Trying to find tsql for TRIGGER which will send me email, if someone rename database in test/dev environment. I found it for CREATE and DROP database trigger but could not find for RENAME database.
View 8 Replies View Related