I setup Hiarchy in the dimentions of my cube, however when I go and look at it via proclarity, I can't see the hiearchy there.
I have one table that has:
Category
Subcategory
Partnumber
And I have the hiearchy set from Subcategory to partnumber.
Then I go into proclarity and limit the category by "my catname" and I still see the 8000 partnumbers in the list.
Any ideas?
I have a cube that we are processing nightly via an Analysis Service Processing Task in SSIS. In order to increase the performance of the processing time, we elected to use a lot of rigid dimension attributes, and do a full process of everything in the SSIS task. The issue that I am having is that after that task completes, I need to go into Visual Studio to deploy the cube becuase we are unable to browse or use the cube. This issue seemed to start once we changed the SSIS Analysis Service Processing Task to do a full process on the dimensions, rather than an incremental.
I would expect that once development is done, and it is processed and deployed, that is it. My thinking is that the SSIS task should just update the already deployed cube,
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
I'm making my first attempt at creating a cube using Analysis Services based on my exisiting datamart. Datasource, views, and dimensions have been defined. But comes deploying the cube, it's giving the error saying "A connection cannot be made. Ensure that the server is running." The Deploy Target server and database are the same where my datamart is. Or, maybe I don't know what I'm doing.
Would appreciate any suggestion for my enlightenment. Thanks
I have a (hopefully typical) problem when it comes to cube design. Westore millions of product records every year, broken down bymonth/quarter. Each product can be assigned to various heirarchialclassification groups etc. The data in an OLTP DB occupies roughly100G for a typical year.We're looking at breaking this out into OLAP to provide faster accessto the data in various configurations and groupings. This is not aproblem, as this is the intended use for Analysis Services.The problem is that we apply projection factors on the product pricesand quantities. This would be ok if it only happened once, however,this happens every quarter (don't ask why). The projection factorschange 4 times a year, and they affect all historical product records.This presents a challenge because to aggregate the data into a usefulconfiguration in the cubes, you throw out the detail data, but thismeans throwing out the price and quantities which are needed to applythe projection.So if you have Product A at $10 and Product B at $20, and roll both upinto Category X, you'll have $30, but you'll lose the ability to applya projection factor of .5 to Product A and .78 to Product B. They'rerolled up.I don't want to regenerate the cubes every 3 months. That's absurd.But we can't live without the ability of projection theprices/quantities on a product level (detail level). So how can thisbe achieved when the other cubes are created at a higher level withless details and sums of the detail data?My initial guess is that we have to update the product data, and thenreaggregate all the other data that is built upon that product data.Is there any other way to apply math to the data on the way out?Thanks in advance!Regards,Zach
View 2 Replies View RelatedIf there are any AS gurus out there, I could use some help. I've been having some problems with particular AS dimension and cubes and it's driving me crazy! It doesn't matter what I do, nothing seems to work.
Anyway, here's what I'm trying to do. I've got a fairly simple dimension. There is a date stored in the dimension that is formatted as an int. The dimension needs to only display AGE, so I cast the int as a date and do a datediff to get AGE. The dimension builds just fine and I get the results I want. My problem is when I add the dimension to the cube. The cube fails to build and I get an error message - "Data source provider error: The column prefix 'MY TABLE' does not match with a table name or alias used in the query." Basically, AS is telling me that the table that is used for the dimension doesn't exist, even though the fact and the dimension are joined properly and I've validated the structure.
I've run a number of queries in QA on the two tables and everything works fine. No funky data issues. I've run the service packs a few times, but that didn't work either. I've tried making a cube that only has the just fact table and the one dimension table, and it still fails.
Basically, I'm out of ideas. Any help that anyone has is greatly appreciated.
Hi,
I am having the requirement where I have to use string as measures. Is this possible in Analysis services 2K.
Any help on this will be greatly appreciated
Hello:
How do I connect to an Analysis Services 2000 cube while in Integration Services? My idea is to execute an MDX query from within a package, and then stage the data to a SS 2005 table for a RS report to query.
Thanks in advance for your suggestions!
Tim
I'd like to be able to update an Analysis Services cube through a stored proc.
Currently I can:
- Make a DTS package that updates the cube
- run xp_cmdshell which runs dtsrun which runs the DTS package.
That is messy, easily broken, and hard to get good error info when an error occurs. Is there a better route?
Can I create a cube file, .cub ,without the Microsoft Analysis Services
Pls Guide me as I am new in this field.
Thanks
Loyd
Hi,
I am processing one cube using Full Process option and it's giving
following error.
Analysis Server Error: Internal error [Object does not exist] '11948' ;
Time:1/8/2004 6:11:11 PM
Error(-2147221421): Internal error (Internal error [Object does not
exist] '11948' ); Time:1/8/2004 6:11:11 PM
Can anyone help me on this.
hi,
I try to generate ad hoc reporting model for analysis services cube in reporting services.
in Management Studio I connected to reporting services, defined a data source to the analysis services database.
But If i try to generate model i get the error:
"While connection with a data source a mistake has appeared, or the query is invalid for the data source. (rsCannotPrepareQuery)(Report Services SOAP Proxy Source)"
Any ideas as to what may be the problem?
Thanks!
karaman
Hi,
I've been trying to use Analysis Services 2005 Cube as a data source, query it via MDX and then use the data returned elsewhere in SSIS.
However, I've been unable to get this working and can't find any information regarding how this can be done. Surely it should be possible when I can get this working even in Excel?
I've looked in December edition of BOL and no luck - have also sent a feedback to BOL regarding this and have been told that "it should be possible, since there is a way to send SQL queries to AS." However the person I was speaking with knew of no one who had actually tried this scenario and to try posting here.
Any help as to how to get this done would be greatly appreciated.
NR
Mr. Pearson,
I am currently reading your article titled, "MDX in Analysis Services: Create a Cube-Based Hierarchical Picklist". This article is directly applicable to a problem we are currently trying to solve regarding ragged hierarchies as input parameters.
I have not read the entire article through but am in the process of doing so. Also, I will be trying to implement your solution.
I have one question, will SSRS support multi selection when using a hierarchical picklist? Thanks in advance for any assistance.
We have set up an IS package to process an AS 2005 database (comprising cube & dimensions, etc) daily, via a SQL Server Agent job on both development and production systems. This has been working fine for months.
A new dimension was added to the cube on the development system - automatic processing via the IS package continued without issue. However, when the new dimension was added to the production system the IS package no longer processes the cube correctly. Although all appears ok (and all is present and correct in the logs), no data updates to the cube are made. Only when the cube is manually processed does the cube get updated.
Anyone got any ideas about how to get around this issue? We have created a new IS package, with a single Analysis Services Processing Task, and tried this but get the same outcome.
I have problems creating a cube with AMO.
I can add the cube to the database object and fill it with dimensions and a measuregroup (see code below).
If I call cube.Update() it says something like "Error in meta data manager. Cube has no measuregroups." (getting the message in german language)
The error in Microsoft.AnalysisServices.OperationException.Results.Messages is -1055653629
I can't find any documentation about this (or any other) error code in Microsoft documentation.
Here's my Code:
Cube newCube = database.Cubes.Add("MyCube","MyCube");
newCube.Language = 1031;
newCube.Collation = "Latin1_General_CI_AS";
CubeDimension dim = newCube.Dimensions.Add("dim1","dim1","dim1");
CubeAttribute attrib = dim.Attributes.Find("dim1Attr1");
[code]....
Hi,
I have some questions about SQL Servers 2000 and 2005 compatibility.
In my configuration I have to use both servers.
The cubes are stocked in 2005 server.
May I transfer from 2005 to 2000 Analysis Services the cubes?
If yes, what is the procedure? The result of migration is the same in the two different versions?
If not, how can I solve this problem?
Thanks in advance.
Hi,
I was talking to my boss to day and our report request are not very consistant. We always having someone coming back to change something in our report. We were thinking of useing something called the Cube Analysis. Then it give our employees the raw data for them to run any standard query for themself. We have folks that want a report one way, but then they changed their minds and we are creating yet another report 4 or 5 times. what are your thoughts about this type of database?
i want to create cube withe 2 fact tables. is it possible?? if it is could you show me how !!
View 2 Replies View Relatedhow can use this mdx script in the calculation part of a cube, will i simply dump it in the script form by starting with the 'create member current cube.
[measures].[test]'
select
[measures].[abc] on 0,
[xyz].[xyz].(&0):[xyz].[xyz].(&60) on 1
from
(
select
(tail([month].[month].[month].members,6))on 0
from
[cube])
The data attached below is from a Fact table. When this data is browsed in the Cube the end user is only interested in value of Measure 1 when it is not equal to zero. Measure 1 is a base measure .how to suppress the value 0 for Measure 1 in the Cube.
DimesionKey1
DimensionKey2
DimensionKey3
Measure 1
Measure 2
Measure 3
[code]...
I know where the data files are etc, but what is the physical structure of a cube like on disk?
Logically we see the data as a star. Is the physical file akin to a star also? Or is a single file a measure group containing all the required member and measure data - thereby eliminating the need for physical join operators.
I am planning to implement the security in my cube..
Total sales is 1000..
Customer Sales
A 100
B 200
C 300
D 400
Total Sales 1000
When i want to give access to the customer A, he can capabule of viewing only A value 100... But the problem is A is able to see total sales 1000.. How can i restrict the sales a value to 100 in the cube.. Where i have to set the property to fix this issue.....
Is it correct to say that for each cube you can have only one Fact Table? I am having a funny dispute just now.
According my experience I never built cubes with more than one fact table, if I want take data from more than one table I write a view and I use it as Fact table...but a cube with two or three fact tables? Never tried..
i am currently trying to build a distinct count on my cube (mssql2005 analysis services).But after i added the discount count on the field i want to and start the processing, the following errors appear.Errors in the OLAP storage engine: The sort order specified for distinct count records is incorrect.
View 17 Replies View RelatedI have a cube. Its xml is different at some point than its design view. Suppose for some dimension and its attributes, source table is different than what it showing in the properties window for them..
Is this possible? How to read cube xml because there are repeating tags in it. There are two type if dimension tags.. one has only attributed and other has all properties.
Is it possible to have more than one cube under one SSAS database? For example I have a database "Test" and in this the cube exist is "TestCube", is iit possible to deploy another cube "TestCube2" under the Test databse?
If yes then what is the process to do that, the reason I am asing is there are some common dimensions used n both the cubes and I am not sure what is the best way so that I can use the shared dimension?
How can we select translated text of cube translations, like measures, dimensions, dimension attributes. I have below query which return translations of dimension attribute's memebers
WITH
MEMBER Measures.CategoryCaption AS Product.Category.CurrentMember.MEMBER_CAPTION
MEMBER Measures.SpanishCategoryCaption AS Product.Category.CurrentMember.Properties("LCID3082")
MEMBER Measures.FrenchCategoryCaption AS Product.Category.CurrentMember.Properties("LCID1036")
SELECT
{ Measures.CategoryCaption, Measures.SpanishCategoryCaption, Measures.FrenchCategoryCaption } ON 0
,[Product].[Category].MEMBERS ON 1
FROM [Adventure Works]
I am getting translations of product category members but I want to get translated text of "Category"?
I have designed a cube. It has two fact tables and some dimensions. Fact table to fact table is many to many relationship.
For example
FactMain
DataKey(PK), StartDateKey, PostCodeKey, TotalCost
FactBridge
DataKey(FK), ProductKey(FK), Position - PrimaryKey on DataKey + ProductKey + Position
DimProduct
ProductKey(PK), ProductCode
Cube is built successfully, processed successfully.When I try to process the cube from agent job, I am getting error "Attribute key not found: tablename, value..." I have added a job step to run AnalysisServices Command. I have taken the command from cube process script(taken from manually process the cube and take script generated). I used ProcessAffectedObjects = "true" in the script. When I checked the tables, the key does exist. Why am I getting this error?
I have a TEST database which contains 1 cube.
I have created another cube and I want to add this cube to the TEST database also.
However when I deploy the cube it overwrites the database with the new cube and the old cube is gone.
How can I have the 2 cubes within the TEST database.
I want to implement population data in sales cube.
Fact table has customer code which is foreign key of Customer master dimension which in turn is linked to census data dimension. Census data dimension have city wise population data having foreign keys of zone and state.
We want to add population data in fact table.
I have been trying to get the ValueR column of the following query through the MDX but instead getting ValueW as output of the MDX
select
exp(Log(sum(MTMROR)+ 1 ))-1 as ValueW,
exp(sum(Log(MTMROR + 1)))-1 as ValueR
from
Temp_Performance
where Rundate in ('2015-03-01','2015-03-02')
MDX written for the above query is
With
Member [Measures].[LogValuePre]
as ([Measures].[MTMROR] + 1)
Member [Measures].[LogValuePre1]
as VBA
[Code] ...
[MTMROR] measure has the aggregate function Sum. What i can get from this behavior is MDX is first aggregating the result and default aggregation function is Sum. When i try to see the value with more granular data by having the date dimensions on the row (un-commenting the date dimension) i get the correct log and exp log values. Its showing the correct value as date dimension is most granular level in the fact table. While trying to get the data at less granular level(Fund level), getting the sum function applied automatically.
If i set AggregateFunction to none in the cube structure, i get null as the output.
How could i apply the log function before the sum function in the [MTMROR] measure?
I am in process of automating a cube migration from SSMS 2008 to SSMS 2012.
In this process iam deleting the existing cube databases and restoring them on a different location on the same server.
When i try to execute the restore command or restore using UI i get a wierd error message like this below:
"TITLE: Microsoft SQL Server Management Studio
------------------------------
File system error: The following error occurred while opening the file 'DrivePath3F9D4D128D5E417FA6F2[CUBEDBNamepath].fact.map'.
Server: The current operation was cancelled because another operation in the transaction failed.
(Microsoft.AnalysisServices)
[Code] ....