our application user is a db owner and my auditor has asked me to change the permission.
what permission should be give for the application user who can access all the schema. create temprorary table and drop
tables.
In my site, when a user registers, I need to create rows in additional tables besides aspnet_Users. So, I need to be able to pass the generated userId guid to subsequent SqlCommands. I'm having a terrible time with this. What's the correct way to set up a SqlParameter so that it will accept a guid? I keep getting this error: "Conversion failed when converting from a character string to uniqueidentifier."
I've tried creating the parameter both with and without a SqlDbType.
cmd.Parameters.AddWithValue(paramName, guid);
and
SqlParameter p = new SqlParameter(paramName);p.SqlDbType = SqlDbType.Guid;cmd.Parameters.Add(p);
and I get the same error either way.
Driving me nuts! Any help appreciated.
Does anyone know how to change the database owner to sa (dbo)?
View 2 Replies View RelatedHow do I loop through a database and display all the table name in it
then use
SP_ChangeObjectOwner "TABLE_NAME","dbo"
where table_owner is OBI
In a nut shell, how do I loop through a database and isplay name ?
HiWe have a script that allows customers to change the users of thedatabase including the database owner. This script can be run at anytime. However, sometimes (and it really is only sometimes!) when thefollowing statement executes:"exec sp_changedbowner @USER_OWNER"the following error is reported:"The proposed new database owner is already a user in the database."I have checked the other postings and the Books Online but cannot finda way to query the current name of the dbowner i.e. the value of@USER_OWNER above. We have to be able to do this within the script sothat if the @USER_OWNER variable is already the dbowner we do notbother to execute the statement as otherwise this could display theerror. Can anybody help?Thanks in AdvancePaul
View 5 Replies View RelatedHow do I change the Database owner for a MODEL database?
When I open the properties for a Model database, it shows "UNKNOWN" as the database owner, and I can't run the command 'sp_changedbowner 'sa' as it's not allowed to run on master, model, and tempdb.
Any help?
Dear All,
I have a user with DBOWNER,DBCREATOR role and access is set to deny on viewing any other databases. Now when I connect using this user and try to restore the database. after restore, I can not open it or access it using the same user.
what is causing this.
Thanks,
Hi All
I have my program create and load (restore) a database, then create a login and make it dbowner by running a script like below via OSQL:
EXEC sp_addlinkedserver 'SETUP1myserver','SQL Server'
EXEC sp_serveroption 'SETUP1myserver','DATA ACCESS', 'TRUE'
GO
DROP DATABASE [mydb]
GO
EXEC sp_droplogin 'mylogin'
GO
CREATE DATABASE [mydb]
ON (NAME = N'mydb_data', FILENAME = N'C:AppfolderSQLmydb.mdf' , SIZE = 100, FILEGROWTH = 10%)
LOG ON (NAME = N'mydb_log', FILENAME = N'C:AppfolderSQLmydb.ldf' , FILEGROWTH = 10%)
COLLATE Latin1_General_CI_AS
GO
RESTORE DATABASE mydb FROM DISK = 'C:AppfolderSetupmydb.bak' WITH REPLACE,
MOVE 'mydb_data' TO 'C:AppfolderSQLmydb.mdf',
MOVE 'mydb_log' TO 'C:AppfolderSQLmydb.ldf'
GO
EXEC sp_addlogin 'mylogin','pass1$'
GO
USE mydb
EXEC sp_changedbowner 'mylogin'
GO
This works fine to a point. The program can then connect to the database and carry out normal processing with the "mylogin" user/password but it cannot do administration activities that a dbowner can do.
How do I create a login that does have true dbowner rights?
TIA
Sed Mayne
Without giving dbowner how can we grant permission to user to alter/create procs?
View 3 Replies View RelatedHi there everyone, this is my first post so go easy on me :)
Basically I am trying to get my database to copy the value in the UserId (unique identifier field) from the aspnet_Users table to a foreign key UserId in a table called userclassset. I have made this field the same datatype and created a relationship between the two. Unfortunately, when I add a user using the ASP.Net configuration tool it does not automatically copy this value into my own custom table. I have noticed it is however automatically copied into the aspnet_Membership table. Any pointers on how to solve this would be great!
Thanks :)
Hello everyone.
i need to auto generate the user id in id colunm in my sqldatabase table.i want it to generate in this fashion.(mycompanyname-todaydate-number.)eg (ibm-15thfeb-1) (ibm-15thfeb-2) (ibm-16thfeb-1)here i need this user id to be automatically displayed in my web form when doing registration of new user,then only after clicking the savebutton i want all the data along with user id to be inserted into the table in sqldatabase.thanksjack.
HiI've my ConnectionString in web.config... I want to display the DB UserID on my webPage and UserID is specified in ConnectionString... Can any one help me in this caseThanksNasir Ibrahim
View 2 Replies View RelatedI am trying to configure a sqldatasource control using the where clause to grab a single record with a certain UserId. Teh UserId is stored in a variable of type System.Gui and I cant seem to figure out how to do this. Can someone give me a hand please?
View 3 Replies View RelatedI'm trying to sort by domain user id, I can pull the user id fine but now I want to sort my SELECT by that name. How do I put the value of getUserIdentity into my SELECT statment.
Thanks
<script language="C#" runat="server"> protected string getUserIdentity() { return HttpContext.Current.User.Identity.Name.ToString().Replace("DOMAIN\", ""); }
protected void Page_Load(Object sender, EventArgs e) { username = getUserIdentity(); SqlConnection myConnection = new SqlConnection("Data Source=CLIENTELE;Initial Catalog=forms;Integrated Security=True"); SqlDataAdapter myCommand = new SqlDataAdapter("SELECT * FROM formTable WHERE userID = @username ORDER BY status DESC", myConnection);
DataSet ds = new DataSet(); myCommand.Fill(ds, "names");
MyDataGrid.DataSource=ds.Tables["names"].DefaultView; MyDataGrid.DataBind(); }
</script>
Hello
Currently, I am using a varchar "UserName" as a primary key instead of an Identity or GUID.
System Info:
When user's sign up they provide the "UserName" that is used as a PK.
Creating a message board type web application.
UserNames will never change.
UserNames are used extensively as FK's in other Tables.
We want to scale well.
Does anyone know the implications?
I understand Joins are faster on numerical values than strings but we will not be performing many joins.
In my case is it better to use Identity as a PK or is it better to use a varchar for a "Users" table?
Thanks
jenn
I wrote trigger to insert old data before update or delete .
Now while inserting i want to insert userid and machine id
for user id ia tried the following query as
SELECT CURRENT_USER;
it retuns o/p as dbo
Please give me solution
Malathi Rao
I have installed Sql Server 2000 Reporting Services.
I desinged report in VS 2003.When press F5 key.Every time it is asking for user id password then only it is giving List of Report Names.
Is there any way to avoid giving user id and pwd every time.
Regards.
I am creating a new application and just created a new database
Application: VB.net 2005/ ASP.net
Database: Sql Server 2005 with four tables
I need to set the userid and password on the database. How do I do that?
I want to be able to create a SQL connection object in my code and I have something like the following:
<CODE>
Dim objcon As New SqlConnection("server=serverName;uid=;pwd=;database=SomeDatabase")
</CODE>
but the "uid" and the "pwd" are not set on my database. what is an easy way to do this? thanks
Well, I want to store my customer records in two tables in an SQL Server 2005 Database. (Visual Studio 2005 with ASP.Net and C#).
I want to create a unique ID for each user which starts with either an IN or a CO (indivudual or Company). This information is stored in two seperate tables, one table called individual and one table called company.
I want my individual table to store a unique ID with IN************, so it should have IN followed by a 12 digit unique ID.
I want my company table to store a unique ID with CO************, so it should have CO followed by a 12 digit unique ID.
I'm afraid Unique IDs are something im not very familiar with, so any help would be greatfully appreciated, but please be clear as I have a bit of trouble understanding. I wouldn't know how to even begin this, as I have trouble using simply the UniqueIdentifier attribute.
Thank you in advance for any help!
Hello!I work with oracle, mySQL but im completely new to SQLserver.How can i set a auto-increment unique variable for userID ?After deleted user, the userID should be never used again on a new user.Thank you,
View 1 Replies View RelatedI have a user which has the currect rights to do what he needs but others with the same permissions (from what I can tell) can not do somethings. It looks like I have 2 options
a.) find a way to mirror the working one to 30 others ids
or
b.) find some tool that will do a detailed comparision of the two ids
Any suggestions/tools(free)/scripts that would work?
Thanks
Hi,
I have the following situation:
I have a table that is log of transactions of useractions. Each time a userstatus changes, a new entry is made into the table.
The table has (currently) about 4 million records, and keeps growing each day with thousands of records. It logs the status of about 150 users (currently active).
What I now want is to get the log-entry from all the distinct users that have a log-entry on the latest day (so current day, 'where TimeStamp > 2008-04-08').
(extremely simplified) Example:
(date is y/m/d)
USERID TIMESTAMP STATUS
----------------------------------------------------
... (thousands and millions of records above)
Ed 2008-04-07 18:00:00 Logged_Out
Jim 2008-04-07 18:30:00 Blabla_Status_5
Jack 2008-04-07 19:00:00 Logged_Out
Jim 2008-04-07 19:30:00 Logged_Out
Jim 2008-04-08 06:00:00 Logged_In (<< notice new day)
Jim 2008-04-08 06:01:00 Blabla-Status_1
Bob 2008-04-08 06:03:00 Logged_In
Fred 2008-04-08 06:05:00 Logged_In
Jim 2008-04-08 06:08:00 Blabla-Status_2
Jack 2008-04-08 06:12:00 Logged_In
Fred 2008-04-08 06:20:00 Blabla_Status_5
Jack 2008-04-08 06:12:00 Logged_Out
Fred 2008-04-08 06:12:00 Blabla_Status_4
Jack 2008-04-08 06:12:00 Logged_In
Jack 2008-04-08 06:12:00 Blabla_Status_7
----------------------------------------------------
The result should be:
USERID TIMESTAMP STATUS
----------------------------------------------------
Jack 2008-04-08 06:12:00 Blabla_Status_7
Fred 2008-04-08 06:12:00 Blabla_Status_4
Jim 2008-04-08 06:08:00 Blabla-Status_2
Bob 2008-04-08 06:03:00 Logged_In
----------------------------------------------------
(How) can this be done in one stored procedure?
I am writing a VBscript which takes my machine details and put in the SQL database.
But after executing the script , i got the following error: Microsoft OLE DB Provider for SQL Server: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
I dont remember the password I have given during installation.
Please tell me how to get the password of sql server.
I use DTSRun /Uuserid /Ppassword /Sservername .... in a batch process.
I always get the error message to run with a trusted connection. I can run the same batch process from a command line under my own domain id and it runs as if it had a trusted connection.
Will DTSRun run only with a trusted connection? Do I need to set something in the package to get SQL Server to run with a userid and password? Why does it always default to using a trusted connection. I need to know what I have to set to tell it that I am using a userid and password. I have included an example of how it's coded in the BAT file.
Example:
DTSRun /S"myserver" /Umyuser /Pmypass /N"Load_Data" /L "c:mylogsLoad_Data.log" /W"0"
When I tried to browse the reportserver url. The IE 7.0 asks me for Username and password. I feel, its some settings related to security. But other sites created are working fine. The virtual directories created using Repoting services configuration manager only ask me username and password.
Any suggestions.
Murali.
I have recently had a few reports that are built around the userid parameter start failing to pass the userid parameter. If I run the report and hard code the userid everything runs just fine, but I am not able to collect the userid when the user is logging into the report server. Any thoughts or suggestions?
R/ AA
I
want to join my existing tables such as ORDERS with aspnet_Users.UserId on ORDERS.CustomerId.But I am confused which data type should I choose for customerId field.The
datatype of the of aspnet_Users.UserId is uniqueidentifier, but
obviously I cannot assign my customerId field to uniqueidentifier data
type. I found that "The uniqueidentifier data type in SQL Server is
stored natively as a 16-byte binary value." I wish aspnet_Users.UserId
would be an integer IDENTITY field. I also want to ask if I can change
UserId field's datatype to integer?There are also some other tables that I want to join with aspnet_Users table on its UserId field. Can you suggest any solutions?
Hello everyone,i have a web form to take user details.as soon as the submit button is clicked the form is submitting and the new row is being added into the sqldatabase.its fine ..but in the newly added row, i want the user id(primary key and auto generating) to display in different manner.in mytable column(userid),instead of userid auto displaying 1,2,3,4 ...i want it to display in this way.these are all primary keys of rows added.todaydate-username-1 eg(2.2.2008-jack-1)todaydate-usernaem-2 eg(2.2.2008-zak-2)todaydate-usernaem-3 eg(2.3.2008-leme-2)any idea how to achieve this.?thanks.jack.
View 9 Replies View RelatedI have the following query:
Code:
SELECT DISTINCT [WL].[Id]
,[WL].[UserId]
,[WL].[DIF]
,[WL].[MW]
,[WL].[Notes]
,[WL].[WDate]
[Code] ....
And the error i get is:
> Column 'Wsite.dbo.WLog.Id' is invalid in the select
> list because it is not contained in either an aggregate function or
> the GROUP BY clause.
What I am wanting to do is just conbine the data if there are more than one **UserID** in the list.
As an example:
Code:
Id | UserId | .... | Id | UserName | SLength | ....
5843| 99304 | .... | 99304| Bob Barker | 14 | ....
5844| 06300 | .... | 06300| Dean Martin | 104 | ....
5845| 99304 | .... | 99304| Bob Barker | 8 | ....
5846| 99304 | .... | 99304| Bob Barker | 11 | ....
5847| 7699 | .... | 7699 | John Doe | 0 | ....
So it should look like this:
Code:
Id | UserId | .... | Id | UserName | SLength | ....
5843| 99304 | .... | 99304| Bob Barker | 33 | ....
5844| 06300 | .... | 06300| Dean Martin | 104 | ....
5847| 7699 | .... | 7699 | John Doe | 0 | ....
Notice that Bob Barker's SLength was combined (14+8+11=33).
Hi All,
While deploying reports on the reports server, it is asking to supply user name and password. When I entered the same, it didn't accept them. What do I need to do? Is there any specific setting which I need to configure?
An immediate reply will be highly appreciated.
Thanks
Sekhar
Hi,
I am using the sql server for creating the database. I want to create the database which is having userid and password. This I require since I wanted to restrict acces to database and also only authorise user to database can use the userid and password created at time of creation of database.
So how can I create the database which is having userid and password?
Hi
I have to
implement table level loggin on a bunch of tables. The problem is that
I also have to log the user that made the changes
Obviously the
right way would be to run everything tru stored procs - but that is not
possible for me because there is a lot of existing functionality built
already - some direct sql and a super large number of sprocs.
So I wanted to go with a trigger based approach .However since the
changes are being made by a web app SQL has no idea who the actual web
application based user is.
I originally tried to solve the
problem by adding a LastUpdatedBy column to some of the tables and
forcing the functions to update that too - so that the trigger can read
that column but that has turned out to be very tedius and buggy.
So I want to try something else - so far it seems to be working but I
just want to make sure I am not messing up anything along the way.
There is a function is TSQL called APP_NAME() , this return the name of
the application that started the connection that the TSQL is running
in. This made scense during the desktop days when it would return the
actual .EXE name of the file that executed the changes.
Nowadys it's not so usefull any more becuase in a web based app all
changes are being done by aspnet_wp.exe so i don't know if that info is
usefull - as a matter of fact all access thru ado.net default to ".Net SqlClient Data Provider" .
So my thinking is like this - if I add 'Application Name= userid" to
the connection string before I open it - then I will have access to
that userid thruout any changes that usermakes via APP_NAME()
I realize that I may be messing up the connection pool a bit - but I
have relativley few (60) users who are on the system for long spans -
so each one will be able to reuse their own connectiions.
I just want to make sure before I go off on this that i am not messing things up badly
Thanks for reading this whole thing
Im a bit confused on my programming skills. I know how to add a user and password using the Membership.CreateUser class. ' Define database connection
Dim conn As New SqlConnection("Server=localhostSqlExpress;" & _ "Database=lnp;Integrated Security=True") ' Create command
Dim comm As New SqlCommand( _ "SELECT oldLogId, oldPassword FROM userDetails WHERE (oldLogId = N'chuck') OR (oldLogId = N'top_dawg')", conn) ' Open connection
conn.Open()
' Execute the command
Dim reader As SqlDataReader = comm.ExecuteReader()
' Do something with the data
While reader.Read()
Dim partPassword = reader.Item("oldPassword") ' Adds underscore character and first 3 letters of password for distinct USER ID
Dim newUserID = reader.Item("oldLogId") & "_" & partPassword.SubString(0, 3) ' Create User if Valid
Try
Membership.CreateUser(newUserID, partPassword)
Catch ex As MembershipCreateUserException
' Code that is executed when an exception is generated ' The exception's details are accessible through the ex object
usersLabel.Text &= "<p><strong>Exception: " & newUserID & "</strong><br />" & ex.ToString() & "<br /><strong>Message: </strong><br />" & ex.Message & "</p>" End Try End While usersLabel.Text &= "<p><strong>END OF RECORDS</strong></p>" ' Close the reader and the connection
reader.Close()
conn.Close() But now I want to do something in a Stored Procedure USE [lnp]GOSET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOCREATE PROCEDURE [dbo].[sp_createPortingDetailsWithUsers]-- Add the parameters for the stored procedure here @passUserId NVarChar(50), @passPassword NVarChar(50)ASBEGIN-- SET NOCOUNT ON added to prevent extra result sets from-- interfering with SELECT statements.SET NOCOUNT ON;Membership.CreateUser(@passUserId, @passPassword)Select SCOPE_IDENTITY()ENDBut when I try to execute this in SQL SERVER MANAGEMENT STUDIO EXPRESS, I get an error near the line MEMBERSHIP.CREATEUSER(@passUserId,@passPassword)Msg 102, Level 15, State 1, Procedure sp_createPortingDetailsWithUsers, Line 11Incorrect syntax near 'Membership'. What I want to do is create a user with a UserID and Password that I am passing from a table and then retrieve the USERID (unique identifier) when I create the new user. Can anyone suggest or show a tutorial on what I am doing wrong? I appreciate any assistance in advance,Chuck