I am having trouble attaching a db to ms sql express 2005.
I have the db in a folder deep down in my drive, within an asp.net website project. For some wierd reason i can't drill down more than two levels to get to the DB
Anyone have any ideas why?
Ilan
Hello,
I am using the full version of sql server 2005 management studio to attempt to attach sql express mdf files to sql server 2005.
I was using the databases from an ASP.NET commerce starter kit in sql express. I want to update to sql server 2005, so i detached the dbs.
i deleted the sql express management studio ctp and installed sql server 2005 from the free 6 month trial available online.
I then attempted to attach the sql express files to sql server 2005 and get the following error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server '<servername>'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not find row in sysindexes for database ID 9, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'C:INETPUBWWWROOT<location>ASPNET.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476
I also tried with the original mdf files i had downloaded without making any changes.
any help here?
thank you,
K
Hi there,
I have created an .iss file which when compiled creates a setup.exe file on a cd rom. Within the .iss I have extracted the sqlexpress files out so that it will install straight from disk to the users machine rather than from the .msi file. All this has been successful so far....
My problem is:- I want to attach a database to the an instance of sqlexpress on the users machine. I have detached it from SQL Server 2000 and copied it over to the cd. The setup file copies these over the users hard drive. I have looked through many forums etc and the words that keep popping up are:-
sqlcmd.exe
template.ini
type into the command prompt.
Sorry if I'm a little ignorant but I am not sure how to go about these. How do I open the command prompt on the users machine from CD? Do I have to create something to do this?
Any information would be appreciated, any guidance or scripts would be great.
Regards
Sam
Hi,
I've created a database in sql server 2005, but now I need to detach this database and attach it in sql express. Is this possible? I keep getting an error that my database is readonly. Any help would be greatly appreciated.
thanks in advance.
I'm trying to attach a MSDE 2000 database to SQL Server 2005 Express.
I simply issue sp_detach_db XXX where XXX is the name of my MSDE database. Then sp_attach_db or create database ... with attach and both way gets the following message:
Event ID. : 3415
Description: Database 'XXX' cannot be upgraded because it is
read-only or has read-only files. Make the database or files writeable, and
rerun recovery.
What does it mean?
Thanks for any help,
Peter
Hi,
I have an mdf without an ldf. This was originally a sql 2000 db, since it was not working, I created a blank SQL Express DB and restored a backup over it.
I then detached and deleted the ldf as I used to do with MSDE.
The database will not attach on most machines (file access error for the ldf) even with attach_single_file_db
When I try to attach it on another machine of mine (with sp1 installed) it attaches fine. could this be something SP1 related?
I'm trying to attach a database to sql express with the following code from the management tool. I keep getting an error message. An someone explain what I'm doing wrong.
Msg 102, Level 15, State 1, Line 9
Incorrect syntax near '<'.
IF NOT EXISTS(
SELECT *
FROM sys.databases
WHERE name = N'<northwind.mdb, I4V0Y6SQLEXPRESS, northwind>'
)
CREATE DATABASE <database_name, sysname, your_database_name>
ON PRIMARY (FILENAME = '<c:my documentsmy websmyweb3,,C:Program filesMicrosoft SQL ServerMSSQL.1MSSQLDataorthwind.MDF>')
FOR ATTACH
GO
Ira
Howdy Folks,
I have a site on WS2003, IIS 6 installed on c:.
I put the site in a folder on d:. Nothing else is on d: except the web site.
I added a new website in IIS and pointed to the site on d:.
Using the default connectionString in machine.config, I am unable to connect to ASPNETDB.MDF. Therefors, I can not log in.
In SQL Server Management Studio Express, I attached ASPNETDB.MDF. I then am able to log in.
Does ASPNETDB.MDF have to be manually attched like this when the web site is located on a drive othr than where IIS is installed and running?
Thanks
Hi,
Im working in a proyect where i need to attach a mdf database to the client's SQL express instance. How can i accomplish during installation and without getting the user involved.
Any help will be greatly appretiated
All,
I wanted to to detach a DB say MyDB from MSDE and wanted to attach it to SQL Express.
It could able to Detach the DB from MSDE,but attachment to SQL 2005 is failing. When I verified MSDE Instance through Managment studio "MyDB" wasnot there ; means it got detached.I couldnt find the DB in SQL 2005. When I tried manually through command prompt I was able to attach "MyDB" to SQL2005.
Please help me out!!
Here is the code which I have written.
if SUCCEEDED(hr = CoCreateInstance (CLSID_SQLDMOServer, NULL, CLSCTX_INPROC_SERVER,
IID_ISQLDMOServer, (LPVOID*)&pSQLServer))
{
pSQLServer->SetLoginSecure (TRUE);
SQLDMO_LPCSTR DB = OLESTR("MyDB");
//Connect to MSDE First
if SUCCEEDED(hr = pSQLServer->Connect (szDbServer, szUserName, szPassword))
{
pSQLServer->DetachDB(DB,lpszResult); //Detach the DB
pSQLServer->DisConnect(); //Disconnect MSDE
LPBSTR lpszResult2 = NULL;
long lNumDB;
//Connect to SQL 2005
if SUCCEEDED(hr = pSQLServer->Connect (szSQLExpDbServer, szUserName, szPassword))
{
//LPCOLESTR lpo = A2COLE(sTemp);
//sTemp.operator LPCTSTR
pSQLServer->GetDatabaseCount (&lNumDB);
SQLDMO_LPCSTR files = OLESTR("C:\Program Files\Microsoft SQL Server\MSSQLData\MyDB.mdf,C:\Program Files\Microsoft SQL Server\MSSQL\Data\MyDB_log.ldf");
pSQLServer->AttachDB(DB,files,lpszResult2); // Attach the DB to SQL 2005
pSQLServer->DisConnect(); // Disconnect SQL 2005}
Hi,
I need to install a customed SQL server express instance on the client's computer by using the Command prompt installation. I've already defined the security settings and everything i need but i was wondering if is possible to attach a mdf database during the installation. Perhaps there is a paramenter i can include in the in the ini file.
Thank you
If I create a database in SQL Express and then copy the MDF/LDF files and attach them to a machine running SQL Server 2005 Standard - will this new database have SQL Express limitations?
Are there good reasons not to do this and create the database in SQL Server Standard using scripts generated from the SQL Express instance instead?
Basically, I'm setting up a merge replication between Standard and SQL Express for a common database and I figure attaching a copy of the database created in SQL Express is the fastest way to get this started.
Hey all,
Cool place! Has anyone deployed SQL Express silently using one click and an attached a smart client DB from within the app ... would love to see some of the best practices or horror stories! Just kidding... :) I'm about to deploy a smart client using SQL Express and could use some tips from someone who has been there.
Thanks in advance,
Bill
I have SQL Express 2005 SP2 installed in my Vista Home Premium. I am using SQL Server Management Studio Express to manage .mdf.
When I click "Add..." to attach .mdf database, I have this prompt error message :
The server principal "My-PCMyName" is not able to access the database "model" under the current security context. (Microsoft SQL Server, Error: 916)
I have elevated the rights, "Run as administrator", of my SQL Server Management Studio Express, but still having problem.
I also encounter security error when detaching the existing .mdf :
The EXECUTE permission was denied on the object 'sp_detach_db', database 'mssqlsystemresource', schema 'sys'. (Microsoft SQL Server, Error: 229)
Please advice. Thanks.
If I only have a .mdf file available, how can I attach it to SQL Server 2005? It keeps asking for a .ldf file which I don't have.This one's related to post http://forums.asp.net/1210138/ShowPost.aspx
View 5 Replies View RelatedHi,
I have made a backup of a sql 2000 database that was on the server at work and and I would like to use it in sql 2005 express on my home laptop.
Can anyone help? I can't seem to work out how to do it. Do I restore it or re-attach it? Is it possible?
Sorry if these are basic questions.
Mark
Hi
I need your help in attaching an .mdf database (Created in SQL Server 2005 in another computer) to SQL server 2005. I tried the original way (right click>attache), but all I get is the following:
Is this possible to attach a database from a SQL 2005 server to a Server runnning SQL 2000?
I have searched but came up empty.
We have our production SQL 2005 server (64 bit Standard Ed.) attached to an iSCSI Equalogic SAN. We have set up 2 new servers an installed the cluster service. My question is: can I install SQL 2005 in this cluster environment an latter on disconnect the data and log volumes from the production server, attach those volumes to the cluster an reattach the DBs? the reason we need to do it like that is that we don't have enough spare space in the SAN to initially create these 2 volumes in the cluster.
Any ideas/suggestions would be greatly appreciated.
We have our production SQL 2005 server (64 bit Standard Ed.) attached to an iSCSI Equalogic SAN. We have set up 2 new servers and installed the cluster service. My question is: can I install SQL 2005 in this new cluster environment an latter on disconnect the data and log volumes from the production server, attach those volumes to the cluster an reattach the DBs? the reason we need to do it like that is that we don't have enough spare space in the SAN to initially create these 2 volumes in the cluster.
Any ideas/suggestions would be greatly appreciated.
I am trying to attach to the SQL Server 2000 sample Northwind database using SQL Server 2005. When I do the Database-->Attach using the GUI everything seems alright. I can open the Northwind database and see the usual listing of stuff.
However, when I click on the Database Diagrams, I get an error message stating "Database diagram support objects cannot be installed because this database does not have a valid owner. To continue, first use the Files page of the Database Properties dialog box or the ALTER AUTHORIZATION statement to set the database owner to a valid login, then add the database support objects."
I have tried repeatedly to get the ALTER AUTHORIZATION statement to work, all to no avail. I have restarted my machine, and the properties of the database is now saying that the owner is the same as the other databases I have, but I keep getting the error message.What am I doing wrong here? How can I fix this?
Any help would be greatly appreciated.
Thank you.
Hi All ...
I am not facing a problem while connecting to sql server 2005 databse, when i attach that first, in management studio, then I can access that from localhost, its fine at this point. but when i detach that database from management studio i am facing the follwing error while accessing it from localhost i.e.
System.Data.SqlClient.SqlException: Unable to open the physical file "D:databaseHunzian.mdf". Operating system error 5: "5(Access is denied.)". An attempt to attach an auto-named database for file D:databaseHunzian.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
The connection string to access that database is
undefined=@"Data
I will be happy to have your replies .
I just upgraded a large SQL 2000 database server to SQL 2005, and I have 2 databases that won't attach to the 2005 Server. They are both very small, about 90MB in size, and when I attach them to 2005, the process alternates between running and spinloop status. It can sit forever, and will never complete. I restored backups before the upgrade to a SQL 2000 Server, and reran DBCC CheckDB on both, and got no consistency errors, Updated Stats and indexes, then detached and moved the data files to 2005, and same thing.
View 3 Replies View RelatedHello,
I've seen threads concerning this problem. I have followed the prescribed steps to fix the problem. I've set the db owner to sa, I've set compatibility to 2005. Still I can't get the diagram to function.
Can anyone out there help me?
Thanks, Bill
Hi,
I'm trying to learn some VB programming with the VB 2005 Express Absolute Beginner Series video tutorials (which I think is great) and have come across a problem that I can't solve.
When I follow the instructions in Lesson 9 (Databinding Data to User Interface Controls) my application will display the data from the database correctly and I can edit it (and as long as the debugger is running the data remains changed). However, the changes won't propagate back to the database. I don't get any error messages but after I edit the data, save (with the save button on the BindingNavigator toolbar), and end debugging the data in my database remains unchanged. When I use a MessageBox to show how many rows where edited/updated in the
Me.myTableTableAdapter.Update(Me.myDatabaseDataSet.myTable)
I get the correct number back. I'm sure the problem is not due to coding errors since I've also tried running the accompanying Lesson 9 project file that can be downloaded from MSDN and the problem persists.
I'm using Windows XP SP2, SQL Server 2005 Express Edition and VB 2005 Express Edition. I've tried installing SQL Server 2005 Express with a number of different settings, including default settings, but it doesn't make any difference.
Would greatly appreciate any feedback on this as I'm keen to resolve this problem so I can get on with the next tutorial lesson.
Thanks,
Ieyasu
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
View 1 Replies View RelatedThis problem only occurs after deployment, not when debugging. In the table I am having a problem with I have an ID field designated as the primary key with the identity increment set to 1 and the identity seed set to 1. There is no data in the table when deployed. I can add records to the datagridview control but when I try updating the dataset I get this error indicating that the ID field already has a value of 1 present. If I close the application and re-start it, the exception no longer occurrs when I update the dataset. I am including the code to update the tables incase something is wrong there. Any suggestions?
Private Sub UpdateMemberTable()
Me.Validate()
Me.TblMembersBindingSource.EndEdit()
Me.TblMembersTableAdapter.Update(Me.ChurchFamilyDataSet.tblMembers)
Me.TblMemberDependentsBindingSource.EndEdit()
Me.TblMemberDependentsTableAdapter.Update(Me.ChurchFamilyDataSet.tblMemberDependents)
Me.TblMemberContributionsBindingSource.EndEdit()
Me.TblMemberContributionsTableAdapter.Update(Me.ChurchFamilyDataSet.tblMemberContributions)
End Sub
Hi Guys,
I created a Product database table using Visual Basic 2005 Express and SQL Server 2005 Express. I have just added a new column [Picture] to the database table, which of course, should store an image or picture of a product. I am writing to kindly ask you guys for help .
i) How do I include image files into this column [Picture]?
ii) How do I get this image to display on Visual Basic 2005 Express form, so that when a product is selected the product image is displayed accordingly?
Your help much appreciated. Thanks.
Paul
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
http://msdn.microsoft.com/vstudio/express/sql/download/
Thank you,
Bashman
This is what I have done.
1. Installed VB.NET IDE 2008 and SQL Server Compact 2005. IDE requires upgrade of database to 3.0 version which I allowed it to do. After the database was upgraded, I did an amount of coding work in the IDE and then tried to go back to do more database work in SQL. However the database then could not be opened in SQL Server Compact 2005. An error said that because it had been upgraded, it could not be read. It was requiring me to run 'upgrade.exe'. I had no idea what this meant and could find no upgrade available online.
2. Removed VB.NET IDE 2008 and installed 2005 instead. However, the file extension on the SQL Server Compact database is .sdf, but the IDE is requiring a .mdf extension. I have tried everything I can think of to get it to save or to have the desired extension, but I cannot.
Questions:
1. Do SQL Express 2005 and VB Studio Express 2008 work together?
2. If so, how?
It seems as though application each requires a different version of the database. If the database is usable in one, it is not usable in another.
Thanks for the help.
Julie
I have a 2005 Express DB I wish to attach to using the 2005 Mgt Studio Client (Not the express version, but the full blown 2005 Mgt Studio Client from the SQL 2005 Standard Edition Install disk). Can this be done, or can I only use the 2005 Mgt Studio Express Edition Client?
Thanks in advance.
M. Scott Blalock
View 2 Replies View Related
If i have been using sql server 2005 express for developing my application and i decide to upgrade to sql server 2005 express with advanced services while still working on the same application, what will happen to my application's database. Can i be able to continue with my work with out any major regrets.
View 1 Replies View Related