Automatic Process
Jul 20, 2005I need to automatically generate via SQL, export to Excel and e-mailed
to other people montly. what should I setup in the sql server?
ADVERTISEMENT
Automatic Data Cube Process
Feb 14, 2008Hello,
I want to make a package in SSIS for automatic process of my data cube providing some log informations (two INSERT statements to my log table with actual date and result of operation succesful/unsuccesful). I tried to set data source to analysis services, I found my cube but I don't where I can add my cube to project and how can I desingn it. Can anybody tell me how to??? Thanks
Transaction (Process ID 135) Was Deadlocked On Lock Resources With Another Process And Has Been Chosen As The Deadlock Victim.
Nov 14, 2007
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
FCB::Open: Operating System Error 32(The Process Cannot Access The File Because It Is Being Used By Another Process.) Occurred W
Dec 3, 2007Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
[Execute Process Task] Error:The Process Exit Code Was -1 While The Expected Was 0.
Mar 11, 2008Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
Execute Process Task Error - The Process Exit Code Was 1 While The Expected Was 0.
Jan 30, 2007How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
Execute Process Task - Error :The Process Exit Code Was 2 While The Expected Was 0.
Mar 20, 2008
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
Integration Services :: Dataload Process - Error Capturing Process
Aug 20, 2014I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
Transaction (Process ID 66) Was Deadlocked On Lock Resources With Another Process.
Feb 14, 2007Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
Transaction (Process ID 65) Was Deadlocked On Lock Resources With Another Process
Jan 6, 2012We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
ASPNETDB.MDF: The Process Cannot Access The File Because It Is Being Used By Another Process
Feb 17, 2007Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
Cannot Process Request Because The Process (3880) Has Exited.
Nov 15, 2007
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and
every time the process id is different. Here it is 3880.
Darek
System Process Or User Process
Dec 20, 2006select * from sysprocesses
How can I determine whether a process a system or user?
Identify A Process Which Locked Other Process
Oct 11, 2007Hello,
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process:
Spid 55 55
ecid 5 5
Ecid 0 0
ObjId 0 1784601646
IndId 0 0
Type DB PAG
Resource 1:1976242
Mode S IS
Status TransID GRANT GRANT
TransID 0 16980
TransUOW 00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH
CMD AWAITING COMMAND
Physycal id 1059
Login time 2007-07-05 04:29:53.873
nat address DFF06EBF974D
Wait type 0x0046
HostName .
BlkBy .
DBName grpprddb
CPUTime 54331
DiskIO 1059
ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request:
select * from SYSOBJECTS
where id=1784601646
But I have had no returns.
Regards,
Renaud
The Process Cannot Access The File It Is Being Used By Another Process.
Aug 24, 2006I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
The Process Cannot Access The File Because It Is Being Used By Another Process.
Feb 6, 2008Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
The Process Cannot Access The File Because It Is Being Used By Another Process.
Nov 23, 2006While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?
A Connection Was Successfully Established With The Server, But Then An Error Occurred During The Login Process. (provider: Shared Memory Provider, Error: 0 - No Process Is On The Other End Of The Pipe.)
Apr 7, 2008i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
ASP.net, Database File, Process Cannot Access The File Because It Is Being Used By Another Process
Mar 19, 2008Hi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. &And this error if open the report using the report manager:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. ยง Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed
View 5 Replies View RelatedAutomatic SQL Backup
Feb 9, 2008Hi,
We are working on creating an automatic backup tool for our web application. Our goal is to run a script that "zips" the virtual host/application directory. We have the script to zip the application directory, but is there a way to run a SQL Backup and then zip the output easily? This is where we are struggling.
Any Suggestions are appreciated
Brent
Automatic Rollback
May 1, 2001I am getting an automatic rollback in a transaction that fails to insert a row, via a trigger, due to a duplicate key. The transaction is automatically rolled back and unless the error correctly handled a 'partial update' occurs. Why in the example below is the transaction automatically rolled back (statements 1 to 3) and is there any way of knowing what errors generate an auto rollback. For example if the duplicate key error occurs on the insert into table B below, and not the triggered update, then no auto rollback occurs.
Begin Tran -- 1
insert into A values ('A1') -- 2 updates OK
insert into B values ('B1') -- 3 updates OK
-- triggers insert into B_Hist -- 4 Fails with Duplicate Key error
insert into C values ('C1') -- 5 updates OK
Commit Tran -- 6 3902 error No corresponding Begin
Thanks.
Automatic Updation
Jul 14, 2000Hi all,
I am using the odbc connector to get a local table. I want that table to get populated every night automatically. How can i do that? Also i want to check if any existing record is updated/changed in the dsn database. Any help is highly appreciated.
Thanks,
Jeff.
Automatic Number
Jun 6, 2001I don't know very much about Sql Server and need help.
I have two primary keys called AirlineCode e ID in the same table.
This id is an automatic number. So I don't need to input this value, since
it's created automatic. What I need is this ID be created automatic but
for each new AirlineCode the ID starts as 1 again. For example :
If I put AirlineCode = 220 then ID starts as 1. In another row AirlineCode is
also 220, then ID is 2. But in another row AirlineCode = 500, then this
automatic number come back to 1.
then the rows can be like this :
AirlineCode ID
220 1
220 2
500 1
220 3
300 1
500 2
I think I have to create a script to make this, but I don't kwon how...
Ask someone to help-me
Best Regards
Marcelo
Automatic Recovery
Mar 28, 2001Dear Friends,
I want to Automatically take Backup at 7:00 p.m cutoff Time.and automatically restore the database..to a temporary database,generate my report and delete the database.
Friends,this backup & restore should not require any user interface..it should me automatic.
Plz can anyone help me out.
Regards
Salim g belim
Automatic Updates
Jun 23, 2004I have two sql 2000 server tables one is active and one is terminated (I inherited this db) and I was thinking of having the active table automatically update the terminated table when an employee is terminated. Access is at the front end and in the form of the active table theres a drop down text box that has the employement status(active, terminated, on leave...etc) so when the status turns into terminated i want the acitve table to send those records to the terminated table, ( the data in both tables are not exactly the same). looking into a trigger or stored procedure. This is the first time I've done this so I'm doing some reasearch on how to handle it. Any suggestions
View 14 Replies View RelatedAutomatic Updates
Jun 25, 2004well as I get further into this project of automatic updates I'm fining more and more barriers. The combo list box which indicates whether the employee is terminated or active might be a problem with sql since you cant create a Row source and a Row source type in a sql table. that combo box exsist in the properties of the form. The Row Source Type is a Value List. Shoot :(
View 4 Replies View RelatedAutomatic Job Monitoring
Jul 16, 2006I'm a SQL Server 7/2000 DBA and manages about 40 servers in different networks. Every morning I check through the Enterprise Manager if all Jobs (backup, maintenance, etc.) have run successfully. This check costs me 1 hour per day.
Because of a reorganization I've got some new college's and lost some college's. My new college's think this is to much work, so it should be automated. They only want the failed jobs to report an error on a website or something like that, and don't want to check 40 servers. I don't agree in this, because I'm affraid I'm going to miss some errors.
How do you do your checks every morning?
Thanks,
Marco
Automatic Update
Apr 22, 2008hi,
i have:
create table tbl_order
(
id int
,price float
,quantity int
,product nvarchar(50)
,date_of_order smalldatetime
,date_of_change smalldatetime
)
insert into tbl_order (id, price, quantity, product, date_of_order) values (1, 23.21, 2, 'A+B', getdate())
insert into tbl_order (id, price, quantity, product, date_of_order) values (2, 22.21, 2, 'A+B+C', getdate())
and i want to make automatic update:
-if new order is made, i want to update field date_of_change with getdate().
i want to put it in a job with some trigger or something that will recognize instant new insert.
thank you in advance,
Automatic Failover
May 25, 2008Hi there,
I am testing the db mirroring, making sure it will auto failover. I've stopped the SQL services on my principal and then I looked at the mirror db is says it's restoring. It stayed like that for 10 min before I enabled the mirroring again. Anyone knows why it's not failing over??????
Here's my setup: SQL 2005 Standard, Server 1 Principal, Server 2 Mirror & Witness.
Automatic Scheduling
May 17, 2007I have initiated database backup plan in 2005,occuring every 2 days.backup plan worked for the first 2 schedules,later backup plans is not working.I have checked the time and date setups,its all fine.how to solve.
View 1 Replies View RelatedAutomatic ID In A Primary Key?
Feb 11, 2008CREATE TABLE [dbo].[tblProve](
[ID][varchar](50)NOT NULL,
[tempCountrys][varchar](100) NULL,
CONSTRAINT [PK_tblProve] PRIMARY KEY CLUSTERED
([ID] ASC) WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
I have a table "dbo.tblProve" that have a Primery Key ID of type
varchar(10) and this primary key have a Default value or Binding like this:
([dbo].[fnc_ProveNewID]())
This function "dbo.fnc_ProveNewID()" finds the max(ID) in the same table and creates the next ID.
When I insert a record into the table dbo.tblProve the function creates the new ID automatically (this is the format of the ID '0000000001' or '000000010' etc. ). But when I insert a lot of records from a Select Query it displays this message below:
Msg 2627, Level 14, State 1, Line 2
Violation of PRIMARY KEY constraint 'PK_tblProve'. Cannot insert duplicate key in object 'dbo.tblProve'.
The statement has been terminated.
Is there any way to create a new ID into a table automatically without to be inserted by the user or client?.
SQL Automatic Growth
Jul 23, 2005We use SQL 2000 and our database is configured to grow automatically by10%. Currently 96% of our database is used. At what point will thedatabase expand - what is the trigger point?
View 2 Replies View RelatedAutomatic Fields
Nov 15, 2006Hi,it's possibile to define table fields for automatic Last_Update_Date and forCreation_date using column formula??Thanks !!!
View 2 Replies View Related