Back Up Failure Error
Feb 9, 2004the problem is
source:kernel
backup medium ::reportloerror:write failure on backup device\. ape0.operating system error 23(data error(cyclic reduncancy check));
ADVERTISEMENT
Bizzare Error - All Back-up Agent Jobs Failed With Unsual Error!
Jan 29, 2008I have a really odd one here. We have a production server which is running SQL 2000 Enterprise Edition SP3. It has a number of databases which are backed up nightly. Last night all of the back-up jobs failed with the following error: -
Msg 913, Sev 16: Could not find database ID ##. Database may not be activated yet or may be in transition. [SQLSTATE 42000]
The databases are in good shape - no issues to report. When I run the Agent Job code within a Query Analyser session it works fine.
When I try and re-start the back-up from the Agent Job it continues to fail with the same error.
Any ideas?
Subscription Error : Failure Sending Mail: An Error Has Occurred During Report Processing
Nov 16, 2007
Hello,
On the development server, I am trying to work with subscriptions . Report Server is windows authenticated.
When no paramters exist for the report, the sucbscription is successful.
But if there are paramters for the report, email delivery fails.
These are not data driven subscriptions.
Did anyone face the same problem ? Can anyone tell me where to start debugging since logfiles just say failure to send the email.
Thanks,
SqlNew
Having Difficulty Setting Back Up To Back Up File Wihout Datetime Stamp SQL 2K
Apr 24, 2007Hello,I'm trying to create a simple back up in the SQL Maintenance Plan that willmake a single back up copy of all database every night at 10 pm. I'd likethe previous nights file to be overwritten, so there will be only a singleback up file for each database (tape back up runs every night, so each daysback up will be saved on tape).Every night the maintenance plan makes a back up of all the databases to anew file with a datetime stamp, meaning the previous nights file stillexists. Even when I check "Remove files older than 22 hours" the previousnights file still exists. Is there any way to create a back up file withoutthe date time stamp so it overwrites the previous nights file?Thanks!Rick
View 5 Replies View RelatedMirroring :: Principal Database Get Role Back After Being Back On Line
May 14, 2015New to Database Mirroring and I have a question about the Principal database server. I have a Database Mirroring setup configured for High-safety with automatic fail over mode using a witness.
When a fail over occurs because of a lost of communication between the principal and mirror, the mirror server takes on the roll of Principal. When communication is returned to the Principal server, at some point does the database that was the previous Principal database automatically go back to being the Principal server?
Reporting Services :: Run Two Reports Back To Back Without Page Eject?
Jun 9, 2015I need to run two reports each of A5 Size to run back to page and print on single A4 paper means in 1st half Sale bill will be printed and in second half Gate Pass Will Be Printed both report will be on same page and size and shape should be maintained. How to do it.
View 4 Replies View RelatedCube Back Up Ends In Error
Aug 27, 2007Hi all,
I have back up job that runs to back up Cube daily but lately it is failing and gives error bellow:
The operation has been cancelled. at Microsoft.AnalysisServices.Xmla.XmlaClient.CheckForSoapFault(XmlReader reader, XmlaResult xmlaResult, Boolean throwIfError) at Microsoft.AnalysisServices.Xmla.XmlaClient.CheckForError(XmlReader reader, XmlaResult xmlaResult, Boolean throwIfError) at Microsoft.AnalysisServices.Xmla.XmlaClient.SendMessage(Boolean endReceivalIfException, Boolean readSession, Boolean readNamespaceCompatibility) at Microsoft.AnalysisServices.Xmla.XmlaClient.SendMessageAndReturnResult(String& result, Boolean skipResult) at Microsoft.AnalysisServices.Xmla.XmlaClient.Execute(String command, String properties, String& result, Boolean skipResult, Boolean propertiesXmlIsComplete) at Microsoft.SqlServer.Management.Smo.Olap.SoapClient.ExecuteStatement(String stmt, StatementType stmtType, Boolean withResults, String properties, String parameters, Boolean restrictionListElement, String discoverType, String catalog) at Mi. The step failed.
But if i run that job manually it runs fine(successfully)
What could be the problem!!
thanks
Manual Back Of Database Error
Nov 27, 2006HiI am attempting to take a manual backup of an SQL 2005 database, viaRight Click on MyDatabase --Tasks --Backup[Specify the filename path and type of backup]However, when I try to specify the filename or, in fact, do anything, Ireceive the following errorProperty BackupDirectory is not available for Settings'Microsoft.SqlServer.Management.Smo.Settings'. This property may notexist for this object, or may not be retrievable due to insufficientaccess rights. (Microsoft.SqlServer.Smo)The user I'm logged into the database with, however, has full rightswithin SQL.Does anyone have any ideas?Thanks!
View 1 Replies View RelatedIif Problem Brings Back #Error
Dec 24, 2006I'm pulling a "Number (8)" data type field for a date (formatted YYYYMMDD) from a Oracle 9i database. When the value is inserted into the database it is set a zero (A non-null database for the most part), otherwise it is for example 20061224. If the date field has a value the date is displayed correctly, but if it is zero then I get the "#Error" message.
Here is one of many iif expressions I've tried.
=iif(Len(CStr(Fields!DTE_MAILED.Value)) = 8,
((CStr(Fields!DTE_MAILED.Value)).Substring(4,2) + "/" + Right(CStr(Fields!DTE_MAILED.Value), 2) + "/" + Left(CStr(Fields!DTE_MAILED.Value), 4))
,
Nothing)
Now I've returned the value with out any formatting done to the string, and it will return "0"(zero) or a number. I've returned the lengths of the returning value and it comes back "1" or "8". I read a lot of previous posts and I thought at first that it was because I was trying to do a substring function on the zero value getting a index error. So I've changed the iif test condition many different ways with no prevail. I read a previous post where someone ended up doing his work in his SQL, but I would like to find out how to do this in the report. This is a simple expression, so I feel like there is something obvious I don't know maybe something with the format mask.
All help will be appreciated!
Pass Back Error Count To Parent Pkg
Aug 29, 2007I am trying to pass back the number of errors encountered by a child package to the Parent package. I have a script within the child package, which will set the value of the Parent package's variable (ChildErrCount). However, I have no idea how to access the Child package's Errors collection to get a count.
Any ideas? Has someone figured out a way to reference the current package's properties (besides what's available from Dts.* ?
Thanks!
Replication Error Of Failure
Mar 23, 2007I am fed up of getting the below error message of repl. atleast once a day.
JOB RUN: 'REPL:1001' was run on 3/23/2007 at 3:00:01 AM
DURATION: 1 hours, 11 minutes, 11 seconds
STATUS: Failed
MESSAGES: The job failed. The Job was invoked by Schedule 421 (Replication agent schedule.). The last step to run was step 3 (Detect nonlogged agent shutdown.).
Please see below for the description of my Replication Job:
------------------------------------
Steps of Job:
1. Distribution Agent startup message.
db: distribution
cmd:
sp_MSadd_distribution_history @perfmon_increment = 0, @agent_id = 126, @runstatus = 1, @comments = 'Starting agent.'
2. Run agent.
cmd:
-Subscriber [GIZMO] -SubscriberDB [TelehopBilling] -Publisher [ROGER] -Distributor [ROGER] -DistributorSecurityMode 1 -PublisherDB [TelehopBilling]
3. Detect nonlogged agent shutdown.
db: distribution
cmd:
sp_MSdetect_nonlogged_shutdown @subsystem = 'Distribution', @agent_id = 126
This Job is executed every hourly and an error is fired atleast once a day notifying failure of this process. Please help me in resolving this issue.
Thanks,
SQL / ASP ADO: Connection Failure, 404 Error?
Mar 13, 2007I have an ASP page I'm testing and this is what I'm trying to do with it. I simply need it to read a SQL table on my server and display data from that table on screen. Thats it. But no matter how many times I tweak my code I keep getting 404 web page not found. Here is the entire pages code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"
<script language="JavaScript">
<!--
var win = null;
function NewWindow(mypage,myname,w,h,scroll){
LeftPosition = (screen.width) ? (screen.width-w)/2 : 0;
TopPosition = (screen.height) ? (screen.height-h)/2 : 0;
settings = 'height='+h+',width='+w+',top='+TopPosition+',left='+LeftPosition+',scrollbars='+scroll+',resizable=no'
win = window.open(mypage,myname,settings)
}
//-->
</script>
</head>
<%
'**************************************************************************
' This page will be used as a test page for Guests and Links
' its purpose is to simply read the guests and links tables then show
' what ever data is in them on the asp page.
'**************************************************************************
' This is the SQL section
<%
set conn=Server.CreateObject("ADODB.Connection")
conn.Provider="Microsoft.Jet.OLEDB.4.0"
con.Open "PROVIDER=SQLOLEDB;DATA Source=IP Address of server here;Initial Catalog=folder name here;User ID=sa;Password=password here"
set rs = Server.CreateObject("ADODB.recordset")
sql="SELECT * FROM T_ProgramGuests WHERE GuestID > 1"
rs.Open sql, conn
%>
<table border="1" width="100%">
<tr>
<%for each x in rs.Fields
response.write("<th>" & x.name & "</th>")
next%>
</tr>
<%do until rs.EOF%>
<tr>
<%for each x in rs.Fields%>
<td><%Response.Write(x.value)%></td>
<%next
rs.MoveNext%>
</tr>
<%loop
rs.close
conn.close%>
</table>
<p>Company Program Archive<left><HR align="left" WIDTH="50%" SIZE="1" NOSHADE>
</left>
<strong><u>Article Title</u></strong><br />
3/7/2007
<br /><br />
<strong>Trust in Cyberspace<br />
</strong><br />
Your reputation follows you, even into cyberspace. Online reviews, peer comments
and user opinions are changing the way we decide to trust other people. Technology
reporter John Doe sees current website ratings leading the way to a new
standard of social acceptance.</p>
</body>
</html>
I'm doing something wrong here but I'm not sure exactly what I'm missing. Is my SQL connection statement wrong? Or is it a syntax issue? Any suggestions?
How Do I Back-up &> Truncate &> Shrink &> Back-up SQL 2000
Jul 20, 2005Hello,I am hoping you can help me with the following problem; I need to process the following steps every couple of hours in order to keep our Sql 2000 database a small as possible (the transaction log is 5x bigger than the db).1.back-up the entire database2.truncate the log3.shrink the log4.back-up once again.As you may have determined, I am relatively new to managing a sql server database and while I have found multiple articles online about the topics I need to accomplish, I cannot find any actual examples that explain where I input the coded used to accomplish the above-mentioned steps. I do understand the theory behind the steps I just do not know how to accomplish them!If you know of a well-documented tutorial, please point me in the right direction.Regards.
View 2 Replies View RelatedSQL Server Comact Error 0XC0000005 After Device Is Powered Off And Back On
Mar 12, 2008This is my first attempt to use SQL Server Compact with Visual Studio 2005.
I wrote a program for Inventory Scaning which requires the database to be stored on an SD Card. As long as the device is left powered on, the programs function normally. However, if the device powers off and is then turned back on the 0xC0000005 error is displayed when the program attempts to do anything with the SQL Connection.
I have also written a small sample program to test and the results are repeatable each time.
The sample program consists of a single form with six buttons (Create Database, Open Database, Insert Records, Delete Records, Close Database, Dispose Database).
Both programs are written in VB.
Here is the code for the sample program.
Public Class frmSQLTest
Private cnDB As System.Data.SqlServerCe.SqlCeConnection
Private connString As String
Private Sub frmSQLTest_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.txtDB.Text = "Storage CardTest.sdf"
End Sub
Private Sub txtDB_LostFocus(ByVal sender As Object, ByVal e As System.EventArgs) Handles txtDB.LostFocus
connString = "Data Source=" & Me.txtDB.Text
Me.txtStatus.Text = "Connection String Set"
End Sub
Private Sub btnCreate_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCreate.Click
If Me.txtDB.Text = Nothing Then
MessageBox.Show("Unable to Create Database")
Exit Sub
End If
Dim eng As New System.Data.SqlServerCe.SqlCeEngine(connString)
eng.CreateDatabase()
eng = Nothing
Me.txtStatus.Text = "Database Created"
End Sub
Private Sub btnOpenDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnOpenDB.Click
Dim sqlDB As New System.Data.SqlServerCe.SqlCeCommand
If cnDB Is Nothing Then
cnDB = New System.Data.SqlServerCe.SqlCeConnection(connString)
End If
cnDB.Open()
Me.txtStatus.Text = "Database Opened"
sqlDB.Connection = cnDB
sqlDB.CommandText = "CREATE TABLE Master (Item nvarchar(12), Description nvarchar(19))"
sqlDB.ExecuteNonQuery()
sqlDB.CommandText = "CREATE INDEX idx_Master on Master (Item)"
sqlDB.ExecuteNonQuery()
Me.txtStatus.Text = "Master Table Created"
sqlDB = Nothing
End Sub
Private Sub btnInsert_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnInsert.Click
Dim RecCount As Long
Dim sqlDB As New System.Data.SqlServerCe.SqlCeCommand
sqlDB.Connection = cnDB
For RecCount = 1 To Me.nudRecs.Value
sqlDB.CommandText = "INSERT INTO Master ([Item], [Description]) " _
& "VALUES ('" & RecCount.ToString & "','Test Item " & RecCount.ToString & "')"
sqlDB.ExecuteNonQuery()
If RecCount Mod 100 = 0 Then
Me.txtStatus.Text = "Updating Record..." & RecCount.ToString
End If
Next
Me.txtStatus.Text = "Records Inserted"
sqlDB = Nothing
End Sub
Private Sub btnDelete_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDelete.Click
Dim sqlDB As New System.Data.SqlServerCe.SqlCeCommand
sqlDB.Connection = cnDB
sqlDB.CommandText = "Delete FROM Master"
Me.txtStatus.Text = "Master Table Cleared"
sqlDB = Nothing
End Sub
Private Sub btnCloseDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCloseDB.Click
cnDB.Close()
Me.txtStatus.Text = "Database Closed"
End Sub
Private Sub btnDispose_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDispose.Click
cnDB = Nothing
System.IO.File.Delete(Me.txtDB.Text)
Me.txtStatus.Text = "Database Diposed"
End Sub
End Class
In my tests, I start the program (loaded on the Storage Card in the same directory as the database). SQL Server Compact is also installed on the SD Card to save space in Main Memory.
Steps to Re-Create the Error:
1. Click the Create Database button. Database is created properly.
2. Click the Open Database button. Database connection opens properly.
3. Click the Insert Records button. Records are inserted into the table properly.
4. Turn off the Symbol MC3000 unit.
5. Turn the unit back on.
6. When I click on any of the following buttons, the error is displayed. Close Database, Insert Records, Delete Records.
I have also tried closing the database (as well as closing and disposing the database) prior to step 4 above, but when I try to re-open the database (or create the database) again, the error displays.
Is there anyway to correct this issue?
With the real program, the database must be kept open as long as each form is open to prevent speed issues and the database must be stored on the SD Card since there is not enough storage space available on the device.
Communication Link Failure Error
Jun 14, 2007Hi Y'all,
When i alter 1 single value in my sql server 2000 sometimes i get following error:
1) [MICROSOFT][ODBC SQL SERVER DRIVER] Communication link failure
After clicking away:
2)CANNOT START MORE TRANSACTION ON THIS SESSION
Maybe someone can help me out on this?
Thanks!
MSDE Install Failure, No Error
Jan 7, 2004I am trying to install MSDE using settings I always have to install it:
setup sapwd=password instancename=vsdotnet disablenetworkprotocols=0 securitymode=sql
But it gets through the install, then the progress bar goes backwards and it uninstalled, I tried to enable logging and do /q+ but none of this gives usable information, i have redownloaded the MSDE SP3 install files and this has changed nothing, I know this is a common problem as I have seen a few sites mention it, but i can't seem to find the fix.
Agent Failure - Sp_MSpub_adjust_identity Error
Apr 25, 2007Hi,
I am running transactional replication between a pair of SQL Server 2005 machines using a remote distributor. Occasionally the log reader agent fails with the error
"Replication-Replication Transaction-Log Reader Subsystem: agent * failed. The process could not execute 'sp_MSpub_adjust_identity' on '*'."
The agent starts back up again almost immediately on its own with seemingly no problems. I haven't been able to find any documentation on this error from Microsoft. Any ideas?
It is not a permissions issue as the log reader agent (and all of the other agents at that) are running under windows accounts with domain admin access for the domain that both the publisher and the distributor SQL Servers are on. (I know, I know, that's horrible. I've only been here a week and a half and I just found out about this today, so I didn't have anything to do with such a glaring security issue.) All of the SQL Servers involved with the replication are still granting sysadmin access to the windows administrators group.
Backup Failure Error Log Messages
Aug 10, 2005I have not been able to find any details about backup failures forMSSQL 2000. I am researching the following:1. when a backup fails at a certain point during the process does thebackup:A. stop there having recorded some details?B. quit without backing up any of the data it already processed?C. skip the data it cannot read and move on?2. Does the error log record any of the details above? For instance, ifthere is a table that the backup could not write to .bak, does theerror log report exactly where the error was?I need a way to obtain a Backup Exception 'Report' that when a backupfails it can tell me what did not get into the .bak file. I wouldprefer automatic notification. Our Oracle DBs have something setupthat can be run when a piece of the DB does not get backed up lettingthe Oracle DBA know where there are issues.Thank you,Stephanie
View 1 Replies View RelatedCommunication Link Failure Error
Oct 12, 2006Hi,
I am using ADO in my application to connect and retrieve data from Microsoft SQL Server 2000 SP4. When I start my application, it establishes connection to the server successfully and I am able to retrieve data from the server. here is my test scenario:
1. unplug the network cable from the client machine and put the cable back in after some time. I disconnect from the database in my code when the client machine disconnects from the network
2. Once the client machine comes back on the network, I try to reconnect and retrieve data from the sql server but I get the following error message when I try to execute a sql command:
[Microsoft][ODBC SQL Server Driver]Communication Link failure
This problem occurs only with Window XP SP2. With XP SP1 it works fine. It seems to be problem on the client side as with Windows XP SP1 I do not get this error message at all.
Here are the various details:
1. The firewall is off on the client workstation.
2. the connection string is:
driver={SQL Server};server=AA;uid=BB;pwd=CC;database=DD
where AA = DNS name of server machine where sql server is running.
BB = user name
CC = password
DD= database name
3. The client is remote to the server.
4. I can ping the server machine when the client machine reconnects to the network.
5. I can still telnet the server when the client machine reconnects to the network.
6. client database provider is MDAC odbc.
7. the client and server machines are in the same domain.
8. Shared memory and TCPIP protocols are enabled and TCP is at the top of the list.
9. No alias is being used.
10. Viris scan is not installed.
11. force encriptioned is NOT checked.
Please reply.
Remote Connection Failure -- Error 26
Nov 19, 2007
Overview. I am converting over from MSDE to SQL Express. My front end program is unable to connect to the database. To troubleshoot, from the remote computer I tried connecting with the management program and I get the Error 26 unable to connect.
(The connection string worked previously (yesterday) when using MSDE as the server. When I installed SQL Express I named it the same instance as the server name under MSDE. I also use server authtication on both with same user name and password. As stated below I cannot connect using the managment console.)
Here is what I have done: I made sure that the SQL Server configuration has been changed to allow network connections (both TCP and named pipes). I have disable windows firewall on both machines. I confirmed that I can connect from the remote machined to the server by network browsing. Both machines are running XP Proff. There is no other security software running on either machine.
More Info. when attempting to log on I am using the server authntication, I use "sa" as the user id plus my password.
Goal. The front end of database program connects to the server remotely using a program called Hamachi over the internet. This works without a problem on MSDE. But for now I am simply try to connect using the managment program which lets you browse for other serves. When I do this it shows the remote computer, but not the name of the computer but not the SQL server which I type in like the following: "INTELsql1"
What I have not Done: I have not changed any permissions or added any users to the server, since this does not seem necessary. As stated the user of remote machine can connect to the server and change files.
Would appreciate any suggestions or tips. Thanks.
I HAVE READ THE POST FROM MAY 13, 2007 AND TAKEN ALL STEPS SUGGESTED EXCEPT MAKING SURE THE BROWSERS SERVICE IS RUNNING ON SERVER WHICH I WILL DO NOW.
ODBC Error 40001- Serialization Failure
Dec 21, 1999I have started to see regular occurences of "ODBC error 40001- serialization failure" in the log of a client website (using cold fusion) and would be grateful for any suggestions on likely causes and solutions. The error message also mentions deadlock victims. Thank you in advance.
View 1 Replies View RelatedError 1068 And Hardware RAID Failure ?
May 20, 2005Have a problem with SQL today. I rebooted the server and now it cannot see the E: drive, as per the RAID array setup. Problem being is that all my SQL databases and logs are on this drive. I'm guessing that the error message is just misleading as based on Microsoft this means the server is stand alone and needs to be started with a non-Domain account. Fix the hardware RAID array and hope all is well. Does that sound about right to you?
View 2 Replies View RelatedPassing Error Description To Failure Task In DTS
Aug 16, 2004In my DTS package, is there any way to pass the task name and error description to another task that gets called on the task's failure?
View 1 Replies View RelatedError Handling Connectoin Failure Of OLE DB Connection
Apr 11, 2008Hello,
I'm looping through a set of IP's (sql servers), i'm changing the property ServerName for OLE DB connection dynamically.
So, I'm having a DataFlow Task inside a For each Task.
Data Flow task has OLE DB Source & OLE DB Destination. I've set ServerName of OLE DB Source to a variable which gets updated by For Each Loop.
Till now everything is working fine. However, if a Server (IP) is down it causes OLEDB Source to give an error.
So in my case, if one server is down, it gives error and does not proceed further. I want it to continue with other
servers.
How do i error handle this ?
Thank You,
Sandeep.
Failure To Create Endpoint, Error 15145
Oct 26, 2007
Hi,
I have system with SQL Server 2K5 SE 3042 SP2 . I was able to set up mirroring with primary-mirror-witness arrangement through GUI.
In this company I replaced another DBA who left, and the way our sys admin arranged our logins co-existed in domain for a while. Then sys admin, after mirroring was done, removed my login, renamed other DBA's login with mine, and removed his.
Now I cannot create endpoint, either by t-sql or through GUI: "An implicit login creation has failed. Reason: the login may have been dropped or its name may already be in use, error 1545".
After pressing Start Mirroring the following shows: "Database Mirroring Transport is disabled in the endpoint configuratin, error 1486". The 2nd error understandable in view of the 1st one.
I checked sys.database_mirroring_endpoints, it is empty. Anyone has an idea what this implicit login is, and where to look for it?
Vladimir Kievsky
How Can I Get The Row Number(error Row) While Constraint Failure At The OLE DB Destination?
Aug 7, 2006my project is insert data to OLE DB destination from csv file.
my question is
how can I get the row number(error row) while constraint failure at the OLE DB destination?
thanks.
ODBC Error Code = 40001 (Serialization Failure)
Sep 22, 2004We get this error constantly...
24.121.0.118, Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322), ODBC Error Code = 40001 (Serialization failure) [Microsoft][ODBC SQL Server Driver][SQL Server]Transaction (Process ID 56) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Any ideas? Would setting the isolation level to Read Commited help?
Communication Link Failure + General Network Error
Nov 22, 2007
Hi Folks,
This is regarding the intermittent failure of communication between the application server and database server in one of our customer environment. Application error as well as SQL error log shows "General Network Error","Communication Link Failure". Please find below the server configuration
Application Server OS: Win 2003 server + Service Pack1, Standard Edition
Database Server OS: Win 2003 server + Service Pack1, MS SQL Server 2000 + SP4
We have checked the Client/Server Network utility associated with SQL Server and found TCP/IP protocol is used in communication neither than Named Pipes. DSN is used. We have also followed and implemented as per one KB article which mentioned Win 2003 server's feature of preventing Denial of Service attacks (Chance may be there to prevent the valid login packets).We made the registry changes and disabled this feature. A scheduled job which updates the database happens every morning. Also backup was done using a backup utility which needs the exclusive access to DB. So we have asked the customer to use enterprise manager for back up the DB instead of using the other utility to backup. If any one have experienced the same issue, please let me know.
Thanks,
Pranav.
Microsoft Data Link Error - Connection Failure
Apr 21, 2008Hi!
I've a computer with W2K SP4 installed. Previously SQL Express 2005 worked but according to the user it "just stopped working".
When selecting database on the server in the "Data Link Properties"-window he is given the following error message:
"Microsoft Data Link" "Login failed. Catalog information cannot be retrieved"
followed by
"Microsoft Data Link Error" "Connection failure"
Note: He is not given the error message "Server does not exist or access denied!"
- The SQL service is started (can be stopped and restarted without problem)
- I've re-installed SQL Express.
- I've checked and is certain the server name is correct (i.e. computernameSQLEXPRESS)
Any ideas here because I'm getting desperate?
Thanks in advance,
Peter Hartlén
SQl Express Edition Install Failure With ODBC Error
Dec 29, 2006Can some one help me with this ?
C:WINDOWSsystem32Odbc32.dll
Version:
3.525.1117.0
SQL_SUCCESS_WITH_INFO (1) in OdbcConnection::connect
sqlstate=01000, level=-1, state=-1, native_error=444, msg=The driver returned invalid (or failed to return) SQL_DRIVER_ODBC_VER:
sqlstate=01000, level=-1, state=-1, native_error=5701, msg=[Microsoft][SQL Native Client][SQL Server]Changed database context to 'master'.
sqlstate=01000, level=-1, state=-1, native_error=5703, msg=[Microsoft][SQL Native Client][SQL Server]Changed language setting to us_english.
SQL_ERROR (-1) in OdbcConnectionHandle::set_attr
sqlstate=IM001, level=-1, state=-1, native_error=0, msg=[Microsoft][ODBC Driver Manager] Driver does not support this function
SQL_ERROR (-1) in OdbcConnectionHandle::get_attr
sqlstate=IM001, level=-1, state=-1, native_error=0, msg=[Microsoft][ODBC Driver Manager] Driver does not support this function
SQL_ERROR (-1) in OdbcHandle::release
sqlstate=HY010, level=-1, state=-1, native_error=0, msg=[Microsoft][ODBC Driver Manager] Function sequence error
SQL_ERROR (-1) in OdbcHandle::release
sqlstate=HY010, level=-1, state=-1, native_error=0, msg=[Microsoft][ODBC Driver Manager] Function sequence error
Error Code: 0x8007ea74 (60020)
Windows Error Text: Source File Name: libodbc_handle.h
Compiler Timestamp: Wed Oct 26 16:37:41 2005
Function Name: OdbcConnectionHandle::set_attr@connect
Source Line Number: 168
---- Context -----------------------------------------------
Connecting to SQL Server
ExecuteSqlCommands
Originial error was 8007ea74 (60020)
ipt
SqlScriptHlpr
Error Code: 60020
MSI (s) (D0!0C) [18:24:47:187]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29521. SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft][ODBC Driver Manager] Driver does not support this function. Refer to the server error logs and Setup logs for detailed error information.
BULK Insert Failure - OLE DB Provider 'STREAMS' Reported An Error
Nov 1, 1999Using BULK Insert with a format file I am receiving the following message:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'STREAMS' reported an error. The provider did not give any information about the error.
The statement has been terminated.
I am running SQL Server 7.0 w/ SP1 applied. The same data file and format files work fine if I use bcp.
The data file contains fixed length records.
Any ideas what the problem is?
Communication Link Failure Error When Running A Distributed Query
Apr 12, 2007Hello
TestMachine1 runs SQL2005 SP2 and has as linked server myRemoteServer (SQL2000) server. I run an stored procedure in TestMachine1 which inserts about 20,000 rows to a table in myRemoteServer and brings back a similar quantity of rows. This stored procedures take about 1.5min to complete, but no error appears.
When running the same stored procedure in TestMachine2 (also SQL2005SP2), the following error appears after about 1 minute of execution (not the exact text):
SQLNCli. TCP Provider: network name is no longer available - communication link failure.
Please note that this stored procedure worked before on TestMachine2 (but with less than 10,000 rows) and that connectivity is proven among TestMachine1 and myRemoteServer, since I can execute "select * from synonym_MyRemoteTable" with no problems at all in the TestMachine2's Management Studio.
TestMachine1 and TestMachine2 have Windows XP Professional SP2; myRemoteServer has Windows 2003 and SQL Server 2000 SP4.
Can you please help me to avoid this error?
Failure Sending Mail: Unspecified Error For Excel Rendering
Apr 14, 2008
Hi all
When using a subscription to send mail, I find that the report can be sent in any format apart from Excel, which gives me the error: "Failure sending mail: Unspecified error". As you can imagine, this doesn't give me much to go on!
I want to use Excel format as it retains the drilldown functionality (hiding / unhiding rows). The ExecutionLog has the status as rsSuccess, but Subscription tab for the report shows the error.
Any thoughts would be most welcome!