Backup Database Database Remotely
Apr 5, 2007
i have a stored procedure that backups database on server A which i execute this SP from server B in a scheduled job. when i run this job it gives me an error:
Executed as user: domainuser_name. Could not relay results of procedure 'usp_BackupDBOnServerA' from remote server 'ServerB'. [SQLSTATE 42000] (Error 7221) [SQLSTATE 01000] (Error 7312). The step failed.
i searched MS KB, everywhere but could not find the solution or even explanation why this happenning.
both sql servers are 2000 and they are linked.
View 3 Replies
ADVERTISEMENT
Apr 9, 2008
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
View 8 Replies
View Related
Nov 15, 2007
We replicate a SQL2000 database (DataBaseA) to a SQL2000 database (DataBaseB) by using the Restore function and hasn't change its logical name but only the physical data path and file name. It is running fine for a year. We use the same way to migrate the DataBaseB to a new SQL2005 server with the Restore function and the daily operation is running perfect. However, when we do the Backup of DatabaseB in the SQL2005, it just prompt the error message
System.Data.SqlClient.SqlError: The backup of full-text catalog 'DataBaseA' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Smo)
Please note we left the DataBaseA in the old SQL2000 server.
Please help on how we can delete the Full-text catalog from DatabaseB so we can do a backup
Many Thanks
View 1 Replies
View Related
Oct 15, 2004
I'm developing a VB app to manipulate data in a table. I've created an SQL server (local) and have successfully connected to and manipulated data in a database that I created. I would like to be able to run the app on another machine and connect to the same server. I'm having trouble determining what the server name is. Tried a few things but get the "server does not exist" message. Server is set to authenticate SQL server and windows.
Is this happening because my server is (local)? If so how do I change it to permit remote access?
Any assistance would be appreciated.
View 2 Replies
View Related
Aug 10, 2007
I'm writing an web app in VS2005.
I've created a product.mdf database through VS2005's Server Explorer (to my knowledge, I'm not using Sql Express). (Side question. The .mdf files are a stand alone xml structure used as a database, correct?).
When I execute locally, everything works great. But when I moved my code to where it is being hosted (remote computer). It's throwing the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
This is my connection string:<add name="MyConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Product.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/>
What is my problem?
View 3 Replies
View Related
Jun 4, 2001
Hi,
Can anyone please tell me how to access a SQL server database remotely. I have
the IP address and login info. of the NT machine that is running SQL server
database, and I want to access the data remotely.
Thanks for any help.
Chetan
View 1 Replies
View Related
Jul 23, 2005
Hi Folks,I should begin by saying I'm fairly new to SQL Server. I'm an applicationdeveloper who has built front ends atop Server, but have never done much inthe way of design / development.My question is in two parts;1). What is the best way to remotely "create" an SQL Server database? I'vebeen told that this can be done with SQL Statements, but thought that theremay be a way using XML.2). Can I use this same method to propogate updates to the remote databasewithout affecting the data?To give you a better idea of what I'm trying to do, I have a client thatlives quite a ways up north. I'm building an application that will beinstalled up there. I'd like a method to be able to make changes to thisdatabase on my end (the development copy), create an XML file of the"database structure" and have the other database or application import thisXML file, and add tables, fields and relationships if they don't alreadyexist.Any help would be appreciated.Thanks!Rick
View 1 Replies
View Related
Jul 20, 2005
I'm working on a website remotely through a VPN and my client uses SQLServer. There's a requirement for a database and my client uses SQLServer 2000.Is it possible to administer this database remotely, just like I dowith MySQL/PHP MyAdmin?Please elaborate.Thanks,Marjorie
View 2 Replies
View Related
Oct 21, 2007
I have a problem when trying to save a transaction remotely. I'm using my pc as the server and I can save without any problem from local (the same project).
But when I try accessing the project from other pc, the transaction doesn't get saved into the db.
No error displayed. It's just doesn't get saved. What is the problem? Is there any IIS setting that I should put in?
View 3 Replies
View Related
Jul 23, 2005
I have a query of the kind brains of this group.Is it possible to access a microsoft sqlserver database (for select, insert,update, delete, and for miscellaneous administrative actions such as tableand index creation and deletion) remotely from a compiled C program (and/or,from Perl) running on a NON microsoft platform, such as Sun's Solaris and/orLinux?What toolset(s) could be used (on the UNIX/Linux end) for such a purpose?Would it require a corresponding special toolset to be installed on theWindows server end as well? (I'd prefer not to have to do that ifpossible.)If you are not now rolling on the floor laughing at the "heresy" of such anotion, thanks in advance.DanJoin Bytes! (replace 'glowing' with 'lucent')
View 1 Replies
View Related
Dec 24, 2007
Hi everybody,
Currently we have a MIS application, developed in VB 6.0 - SQL Server 2000 platform, which is used by around 60 users in our office.
We are planning to host a website remotely, which would allow clients to place orders, track order status etc. on it.
Would it be possible to access our local SQL database from the remote website?
View 4 Replies
View Related
Jan 22, 2008
One of my tables in the db contains the websites and the location of their link directory. i.e. domain.com/linkdirectory
I want to run a check against every website's robots.txt file to ensure that it doesn't look like this:
user-agent: *
Disallow: /linkdirectory/
so I need a program that does the following:
For each website in database (start of loop)
Does robots.txt exist on their site ?(run a remote check)
if it does
is their link directory blocked in robots.txt?
if so, then log their user id and website name into an array for later use
end if
endif
end loop
How would I do this in ASP.net 2.0?
View 3 Replies
View Related
Mar 24, 2008
Morning Guys,
I have a database where I need to kill a remote connection.
If I was manually logged into the box i would you a netstat command to stop the service.
I would like to end a process from another machine before starting a restore process
Does anyone have any suggestions?
thanks,
Jonathan
View 3 Replies
View Related
Nov 9, 2006
Hi all,
WSUS is installed on my windows 2003 server. During the install, parameter DISABLENETWORKPROTOCOLS was not specified, and so no remote connection was possible.
I used SVRNETCN.exe to enable TCP/IP remote connection on port 1433. However it seems not to work.
FROM THE SERVER :
osql -E -S MYSERVERWSUS works fine but
osql -E -S 127.0.0.1WSUS doesn't work, i get the famous error
[DBNETLIB]Serveur SQL spécifié non trouvé.
[DBNETLIB]ConnectionOpen (Connect()).
If i user "osql -L" command, my instance doesn't appear in the list
FROM A CLIENT COMPUTER
osql -E -S MYSERVERWSUS and
osql -E -S MY_SERVER_IPWSUS don't work, i get the same error
I've tried tried to understand for hours, and i'm lost. I thought there may be a problem between SQL and 2003, and read SQL sp3a was required. I ran
select @@version from osql and got result
Microsoft SQL Server 2000 - 8.00.881 (Intel X86)
8.00.881 is not referenced in ms support as a patched version number !!!!!
Can anyone help me please ?
View 1 Replies
View Related
Dec 5, 2007
Hi,
I am experiencing a Named Pipes Provider error 40 message as detailed below. I get this when I'm running the dta utility on a production server which is trying to remote onto a test server to use the metadata and optimizer there.
The error reported is...
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
(note: there is no (Microsoft SQL Server, Error: xxx) reported at the end of the error string)
The error results from the following cmdline syntax run from the production server.
dta -A 0 -E -e C:TuningLog.xml -F -ix C:DTA.xml -N OFF -of C:outputdta.sql -rl ALL -s DTA_20071205
Prod box: 64bit SQL2005 SP2 Std Ed Named instance, TCPIP and Named Pipes enabled, SQL Browser service running.
Test box: 32bit SQL2005 SP2 Std Ed Default instance, Listening for local and remote connections on TCPIP and Named Pipes (configured through the SAC), SQL Browser service running. From the SQL Log on the test box I can see TCPIP is listening & Named pipes is listening on \.pipesqlquery
There is no firewall configured on either box.
I can connect to the test server from the prod box using sqlcmd -E -S<servername>
I can ping the test server from the prod box
Would you have any idea what I'm doing incorrectly? The genericity of the error message doesn't give me much of a clue and the resolutions I've read all revolve around SQLBrowser, surface area config, and SQL Express which I've covered off.
many thanks
Matthew Eames
View 1 Replies
View Related
Aug 20, 2007
Hi, I hope you can help.I have configured a Windows 2003 web server and SQL 2005 Server (on same box) to successfully allow remote connections and to allow access via SQL Server Management Studio Express 2005.The problem I have is that I want to restrict access to the databases on the server via the Management Studio to specific databases e.g. 1 database user "sees" only 1 database.I can configure it so that the user's remote access permissions do not allow access to other databases but they can still "see" the database listed in the Management Studio explorer.I can also configure it so that the users cannot see all the databases (by disabling View All Databases on SQL Server), but this means that they cannot not see their own database which they have permissions for.Is it impossible to have the desired behaviour of only displaying the database which the remote user accessing has permissions for and hiding all other databases?I have MSN'd,Googled and Yahoo'd this one to no avail :(Many thanksFergus
View 6 Replies
View Related
Jan 31, 2008
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
View 3 Replies
View Related
Sep 3, 2014
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
View 6 Replies
View Related
May 7, 1999
Anybody figure a way around this:
In a development server you take a backup and you want to move the entire database to a production server. The production server does not contain the database, users, or logins in master.
When you restore the backup to production in 7.0, the users get moved to DBO because the logins do not exist and then you cannot delete them.
We are having to drop the users from the database on development, back up the database and restore it to production, then recreate the users on production.
This is bogus and did not happen in 6.5 because of the aliases.
Anybody come up with a better way?
View 1 Replies
View Related
Jul 3, 2007
I am fairly new to VS 2005 and SQL Server CE. I have developed a Desktop Windows application using VB 2005 and the SQL Compact Edition Database. This application will sell to users via web download.
When they download a service patch, or updated version, I wish for them to retain the data in their present database. In other words, fill the new database with the old data. The new table structures will remain intact except for added columns at the end.
Question is how to save the old data and update the new database with it. Is there an easy way to do this, or do I need to write a module to save a database copy, and update the new database with content at install time?
View 6 Replies
View Related
Jan 12, 2008
I have a backup of sqlserver 2000 data base . Now presently i am working on sqlserver 2005. Is there any facility to IMPORT entire 2000 database intosqlserver 2005.Please help me if there is any chance. Thanks in advance.
View 1 Replies
View Related
Dec 1, 2006
I have a Subscriber database updated using transactional
replication and want to create a copy for development & testing. The Distribution database is running on the
same 2005 instance as the Subscriber and the Publication database on another
server running SQL Server 2005.
If I use a TSQL script to run the restore, the database is
restored to a usable state but I get the following messages:
Msg 15247, Level 16, State 1, Procedure
sp_MSrepl_check_job_access, Line 112
User does not have permission to perform this action.
The replication agent job [job name] was not removed because
it has a non-standard name; manually remove the job when it is no longer in use.
(I€™ve removed the job name from the message)
RESTORE DATABASE successfully processed 46219 pages in
935.413 seconds (0.404 MB/sec).
It looks like an attempt is being made to restore
replication information too. I note that
the RESTORE statement has a KEEP_REPLICATION options which implies (I would have
thought) that by default the replication information is not be restored.
Incidentally, before implementing replication, backing up
the live database and restoring the backup to a new database took < 7
minutes but running the same process with a Subscriber database backup takes
about 15 minutes.
I€™d be interested to know if anyone has any idea what I€™m
overlooking or doing wrong.
ThanksTim
View 7 Replies
View Related
Aug 10, 2007
Hi,
I was wondering how I could restore a bkp file into a database with a different name. For example, I made a backup of T1.mdf and i want to restore t1.bkp to T2.mdf.
I am using VB.Net to do the backup and restore.
Is there any way of doing it?
Thanks!
View 21 Replies
View Related
Jul 15, 2015
We take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies
View Related
Nov 16, 2015
I have a database that is just over 1.5GB and the Full backup that is 13GB not sure how this is since we have compression on for full backups and my other full backups are much smaller than there respective databases...Now my full backup is taken every Sunday night and the differentials are taken every 6 hours after the full backup. Now I have been thrown into this DBA role with little to no experience just what I have picked up and read. So my understanding of backups are limited but what I think I understand is that we take a full backup and the differential only captures what changes in the database so my question is why is my database 1.5GB but my differential is 15.4GB? I have others database that are on the same instance and don't seem to have this problem. I also just noticed that we do not rebuild the index before a full backup like we do on other instances...
View 13 Replies
View Related
Aug 14, 2006
Due to a network time skew some time ago, all of the databases on an SQL system now have the following information stamped on them..
Within Enterprise Manager (SQL 2000), The "Last Database Backup" timestamp for each database is showing the year 2025.
Our backup system runs incrementally daily and a weekly full. Unfortunately, the timestamp does not seem to be updating as the year is as I guess in the future.
Can anyone advise of a procedure so as I can wipe this time skew date from each of the databases?
Many thanks folks!
View 4 Replies
View Related
Aug 4, 2007
Backup failed to complete the command backup database [ ] TO VIRTUAL DEVICE = ' { 853D3FC0 - 45EA -85B1 - 54F0EA379CAC } 24 ' WITH SNAPSHOT , BUFFERCOUNT = 1 , BLOCKSIZE = 1024
View 1 Replies
View Related
Apr 1, 2008
I should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write
restore filelistonly from disk = 'path and filenam.bak'
restore database. zy
from disk = 'path and filename.bak'
with replace,
move.....
move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
Thanks in advance for any help.
View 3 Replies
View Related
Oct 17, 2006
I have a full backup and several diff backup,now i want to restore
firstly,I restore full backup
RESTORE DATABASE ***
FROM DISK = 'D:databackup200610140000.bak'
WITH NORECOVERY
GO
it's working,then i don;'t know how to continue
Thanks in advance
View 3 Replies
View Related
Feb 10, 2006
Hi All,I am facing this issue very frist time. I add a logical device asfollowing:USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksData','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksData.bak'-- Create a logical backup device, AdvWorksLog.USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksLog','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksLog.bak'-- Back up the full AdventureWorks database.BACKUP DATABASE AdventureWorks TO AdvWorksData-- Back up the AdventureWorks log.BACKUP LOG AdventureWorksTO AdvWorksLogThe database backup is completed successfully but log's backup failswith the following messages:Msg 4214, Level 16, State 1, Line 1BACKUP LOG cannot be performed because there is no current databasebackup.Msg 3013, Level 16, State 1, Line 1BACKUP LOG is terminating abnormally.We are moving from SQL 2000 to SQL 2005. I have ensured that databasehas full recovery mode on. We are using SQL 2005 on Windows 2003 ServerSP1.Further more, I also created a plan to test it, and plan also failswhen backing up the logs.Can anyone shed some light on this issue.Thanks in advance.Najm
View 1 Replies
View Related
Nov 14, 2006
Hi,
I have a MS SQL Server 2005 Enterprise Edition 9.0.2153 which manages my BizTalk Server 2006 Databases. The BizTalk server installer automatically creates a job named Backup BizTalk Server (BizTalkMgmtDb) which should back up the databases and transaction protocolls.
The SQL Server Agent runs under domain-administrator account which has full access to my backup directory D:ackups.
The job executes the following steps:
Step 1: BackupFull:
Command:
exec [dbo].[sp_BackupAllFull_Schedule] 'd' /* Frequency */, 'BTS' /* Name */, 'D:Backups' /* location of backup files */
Step 2: MarkAndBackupLog
Command:
exec [dbo].[sp_MarkAll] 'BTS' /* Log mark name */, 'D:Backups' /* location of backup files */
My challenges are:
1. The job doesn't back up my databases(D:Backups is empty after executing the job)
2. I get every time the following error in error protocol of the job:
BACKUP LOG cannot be performed because there is no current database backup. [SQLSTATE 42000] (Fehler 4214) BACKUP LOG is terminating abnormally. [SQLSTATE 42000] (Fehler 3013).
I have already switched the Databases from full to simple recovery mode and vica versa, it didn't help. Also, the above stored procedures doesn't include neither the TRUNCATE nor the LOG parameters for the logfiles so I wasn't able to solve this issue by adjusting these flags.
Any help would be appreciated.
Thanks in advance,
Greg
View 5 Replies
View Related
Nov 15, 2007
I am using sql server 2000 and windows server 2003 standard edition:
My database backup job is failing due to lack of disk space. I am taking the backup onto E drive and the
available free space on E drive is 6.85 GB and there are no other drives I can use for the database backups.
The size of mdf file is 21 GB and that of ldf file is 4.2 GB.
The transaction log back up job of that db ran fine.
This database recovery model is Full and
Auto shrink is not checked.
There is one primary filegroup for the database.
In this situation, I am thinking of the following option:
1. Backup the db and log files onto another network shared drive.
If I want to still use the same server E drive to backup the db and log files instead of using another network shared drives.
how can I do that.
Please let me know the best way of handling this issue.
Any help is greatly appreciated. Thanks!
View 1 Replies
View Related
Oct 14, 2007
I neglected to backup the transaction log as part of the process of backing up the database. Now i only have the backup file for the database and no transaction log backup. When i try to do a restore on the database, i get the error on a "tail log missing" message (which i'm assuming is that it's looking for the t-log backup?).
Is it possible to restore or even restore to a new database? I'm only looking to retreive data from 2 tables within the backup file.
Thanks!
SQL Server 2005 on Windows 2003 Server x64.
View 16 Replies
View Related